Provided by: openssl_1.1.1f-1ubuntu2.23_amd64 
NAME
openssl-req, req - PKCS#10 certificate request and certificate generating utility
SYNOPSIS
openssl req [-help] [-inform PEM|DER] [-outform PEM|DER] [-in filename] [-passin arg] [-out filename]
[-passout arg] [-text] [-pubkey] [-noout] [-verify] [-modulus] [-new] [-rand file...] [-writerand file]
[-newkey rsa:bits] [-newkey alg:file] [-nodes] [-key filename] [-keyform PEM|DER] [-keyout filename]
[-keygen_engine id] [-digest] [-config filename] [-multivalue-rdn] [-x509] [-days n] [-set_serial n]
[-newhdr] [-addext ext] [-extensions section] [-reqexts section] [-precert] [-utf8] [-nameopt] [-reqopt]
[-subject] [-subj arg] [-sigopt nm:v] [-batch] [-verbose] [-engine id]
DESCRIPTION
The req command primarily creates and processes certificate requests in PKCS#10 format. It can
additionally create self signed certificates for use as root CAs for example.
OPTIONS
-help
Print out a usage message.
-inform DER|PEM
This specifies the input format. The DER option uses an ASN1 DER encoded form compatible with the
PKCS#10. The PEM form is the default format: it consists of the DER format base64 encoded with
additional header and footer lines.
-outform DER|PEM
This specifies the output format, the options have the same meaning and default as the -inform
option.
-in filename
This specifies the input filename to read a request from or standard input if this option is not
specified. A request is only read if the creation options (-new and -newkey) are not specified.
-sigopt nm:v
Pass options to the signature algorithm during sign or verify operations. Names and values of these
options are algorithm-specific.
-passin arg
The input file password source. For more information about the format of arg see the PASS PHRASE
ARGUMENTS section in openssl(1).
-out filename
This specifies the output filename to write to or standard output by default.
-passout arg
The output file password source. For more information about the format of arg see the PASS PHRASE
ARGUMENTS section in openssl(1).
-text
Prints out the certificate request in text form.
-subject
Prints out the request subject (or certificate subject if -x509 is specified)
-pubkey
Outputs the public key.
-noout
This option prevents output of the encoded version of the request.
-modulus
This option prints out the value of the modulus of the public key contained in the request.
-verify
Verifies the signature on the request.
-new
This option generates a new certificate request. It will prompt the user for the relevant field
values. The actual fields prompted for and their maximum and minimum sizes are specified in the
configuration file and any requested extensions.
If the -key option is not used it will generate a new RSA private key using information specified in
the configuration file.
-rand file...
A file or files containing random data used to seed the random number generator. Multiple files can
be specified separated by an OS-dependent character. The separator is ; for MS-Windows, , for
OpenVMS, and : for all others.
[-writerand file]
Writes random data to the specified file upon exit. This can be used with a subsequent -rand flag.
-newkey arg
This option creates a new certificate request and a new private key. The argument takes one of
several forms. rsa:nbits, where nbits is the number of bits, generates an RSA key nbits in size. If
nbits is omitted, i.e. -newkey rsa specified, the default key size, specified in the configuration
file is used.
All other algorithms support the -newkey alg:file form, where file may be an algorithm parameter
file, created by the genpkey -genparam command or and X.509 certificate for a key with appropriate
algorithm.
param:file generates a key using the parameter file or certificate file, the algorithm is determined
by the parameters. algname:file use algorithm algname and parameter file file: the two algorithms
must match or an error occurs. algname just uses algorithm algname, and parameters, if necessary
should be specified via -pkeyopt parameter.
dsa:filename generates a DSA key using the parameters in the file filename. ec:filename generates EC
key (usable both with ECDSA or ECDH algorithms), gost2001:filename generates GOST R 34.10-2001 key
(requires ccgost engine configured in the configuration file). If just gost2001 is specified a
parameter set should be specified by -pkeyopt paramset:X
-pkeyopt opt:value
Set the public key algorithm option opt to value. The precise set of options supported depends on the
public key algorithm used and its implementation. See KEY GENERATION OPTIONS in the genpkey manual
page for more details.
-key filename
This specifies the file to read the private key from. It also accepts PKCS#8 format private keys for
PEM format files.
-keyform PEM|DER
The format of the private key file specified in the -key argument. PEM is the default.
-keyout filename
This gives the filename to write the newly created private key to. If this option is not specified
then the filename present in the configuration file is used.
-nodes
If this option is specified then if a private key is created it will not be encrypted.
-digest
This specifies the message digest to sign the request. Any digest supported by the OpenSSL dgst
command can be used. This overrides the digest algorithm specified in the configuration file.
Some public key algorithms may override this choice. For instance, DSA signatures always use SHA1,
GOST R 34.10 signatures always use GOST R 34.11-94 (-md_gost94), Ed25519 and Ed448 never use any
digest.
-config filename
This allows an alternative configuration file to be specified. Optional; for a description of the
default value, see "COMMAND SUMMARY" in openssl(1).
-subj arg
Sets subject name for new request or supersedes the subject name when processing a request. The arg
must be formatted as /type0=value0/type1=value1/type2=.... Keyword characters may be escaped by \
(backslash), and whitespace is retained. Empty values are permitted, but the corresponding type will
not be included in the request.
-multivalue-rdn
This option causes the -subj argument to be interpreted with full support for multivalued RDNs.
Example:
/DC=org/DC=OpenSSL/DC=users/UID=123456+CN=John Doe
If -multi-rdn is not used then the UID value is 123456+CN=John Doe.
-x509
This option outputs a self signed certificate instead of a certificate request. This is typically
used to generate a test certificate or a self signed root CA. The extensions added to the certificate
(if any) are specified in the configuration file. Unless specified using the set_serial option, a
large random number will be used for the serial number.
If existing request is specified with the -in option, it is converted to the self signed certificate
otherwise new request is created.
-days n
When the -x509 option is being used this specifies the number of days to certify the certificate for,
otherwise it is ignored. n should be a positive integer. The default is 30 days.
-set_serial n
Serial number to use when outputting a self signed certificate. This may be specified as a decimal
value or a hex value if preceded by 0x.
-addext ext
Add a specific extension to the certificate (if the -x509 option is present) or certificate request.
The argument must have the form of a key=value pair as it would appear in a config file.
This option can be given multiple times.
-extensions section
-reqexts section
These options specify alternative sections to include certificate extensions (if the -x509 option is
present) or certificate request extensions. This allows several different sections to be used in the
same configuration file to specify requests for a variety of purposes.
-precert
A poison extension will be added to the certificate, making it a "pre-certificate" (see RFC6962).
This can be submitted to Certificate Transparency logs in order to obtain signed certificate
timestamps (SCTs). These SCTs can then be embedded into the pre-certificate as an extension, before
removing the poison and signing the certificate.
This implies the -new flag.
-utf8
This option causes field values to be interpreted as UTF8 strings, by default they are interpreted as
ASCII. This means that the field values, whether prompted from a terminal or obtained from a
configuration file, must be valid UTF8 strings.
-nameopt option
Option which determines how the subject or issuer names are displayed. The option argument can be a
single option or multiple options separated by commas. Alternatively the -nameopt switch may be used
more than once to set multiple options. See the x509(1) manual page for details.
-reqopt
Customise the output format used with -text. The option argument can be a single option or multiple
options separated by commas.
See discussion of the -certopt parameter in the x509(1) command.
-newhdr
Adds the word NEW to the PEM file header and footer lines on the outputted request. Some software
(Netscape certificate server) and some CAs need this.
-batch
Non-interactive mode.
-verbose
Print extra details about the operations being performed.
-engine id
Specifying an engine (by its unique id string) will cause req to attempt to obtain a functional
reference to the specified engine, thus initialising it if needed. The engine will then be set as the
default for all available algorithms.
-keygen_engine id
Specifies an engine (by its unique id string) which would be used for key generation operations.
CONFIGURATION FILE FORMAT
The configuration options are specified in the req section of the configuration file. As with all
configuration files if no value is specified in the specific section (i.e. req) then the initial unnamed
or default section is searched too.
The options available are described in detail below.
input_password output_password
The passwords for the input private key file (if present) and the output private key file (if one
will be created). The command line options passin and passout override the configuration file values.
default_bits
Specifies the default key size in bits.
This option is used in conjunction with the -new option to generate a new key. It can be overridden
by specifying an explicit key size in the -newkey option. The smallest accepted key size is 512 bits.
If no key size is specified then 2048 bits is used.
default_keyfile
This is the default filename to write a private key to. If not specified the key is written to
standard output. This can be overridden by the -keyout option.
oid_file
This specifies a file containing additional OBJECT IDENTIFIERS. Each line of the file should consist
of the numerical form of the object identifier followed by white space then the short name followed
by white space and finally the long name.
oid_section
This specifies a section in the configuration file containing extra object identifiers. Each line
should consist of the short name of the object identifier followed by = and the numerical form. The
short and long names are the same when this option is used.
RANDFILE
At startup the specified file is loaded into the random number generator, and at exit 256 bytes will
be written to it. It is used for private key generation.
encrypt_key
If this is set to no then if a private key is generated it is not encrypted. This is equivalent to
the -nodes command line option. For compatibility encrypt_rsa_key is an equivalent option.
default_md
This option specifies the digest algorithm to use. Any digest supported by the OpenSSL dgst command
can be used. This option can be overridden on the command line. Certain signing algorithms (i.e.
Ed25519 and Ed448) will ignore any digest that has been set.
string_mask
This option masks out the use of certain string types in certain fields. Most users will not need to
change this option.
It can be set to several values default which is also the default option uses PrintableStrings,
T61Strings and BMPStrings if the pkix value is used then only PrintableStrings and BMPStrings will be
used. This follows the PKIX recommendation in RFC2459. If the utf8only option is used then only
UTF8Strings will be used: this is the PKIX recommendation in RFC2459 after 2003. Finally the nombstr
option just uses PrintableStrings and T61Strings: certain software has problems with BMPStrings and
UTF8Strings: in particular Netscape.
req_extensions
This specifies the configuration file section containing a list of extensions to add to the
certificate request. It can be overridden by the -reqexts command line switch. See the
x509v3_config(5) manual page for details of the extension section format.
x509_extensions
This specifies the configuration file section containing a list of extensions to add to certificate
generated when the -x509 switch is used. It can be overridden by the -extensions command line switch.
prompt
If set to the value no this disables prompting of certificate fields and just takes values from the
config file directly. It also changes the expected format of the distinguished_name and attributes
sections.
utf8
If set to the value yes then field values to be interpreted as UTF8 strings, by default they are
interpreted as ASCII. This means that the field values, whether prompted from a terminal or obtained
from a configuration file, must be valid UTF8 strings.
attributes
This specifies the section containing any request attributes: its format is the same as
distinguished_name. Typically these may contain the challengePassword or unstructuredName types. They
are currently ignored by OpenSSL's request signing utilities but some CAs might want them.
distinguished_name
This specifies the section containing the distinguished name fields to prompt for when generating a
certificate or certificate request. The format is described in the next section.
DISTINGUISHED NAME AND ATTRIBUTE SECTION FORMAT
There are two separate formats for the distinguished name and attribute sections. If the prompt option is
set to no then these sections just consist of field names and values: for example,
CN=My Name
OU=My Organization
emailAddress=someone@somewhere.org
This allows external programs (e.g. GUI based) to generate a template file with all the field names and
values and just pass it to req. An example of this kind of configuration file is contained in the
EXAMPLES section.
Alternatively if the prompt option is absent or not set to no then the file contains field prompting
information. It consists of lines of the form:
fieldName="prompt"
fieldName_default="default field value"
fieldName_min= 2
fieldName_max= 4
"fieldName" is the field name being used, for example commonName (or CN). The "prompt" string is used to
ask the user to enter the relevant details. If the user enters nothing then the default value is used if
no default value is present then the field is omitted. A field can still be omitted if a default value is
present if the user just enters the '.' character.
The number of characters entered must be between the fieldName_min and fieldName_max limits: there may be
additional restrictions based on the field being used (for example countryName can only ever be two
characters long and must fit in a PrintableString).
Some fields (such as organizationName) can be used more than once in a DN. This presents a problem
because configuration files will not recognize the same name occurring twice. To avoid this problem if
the fieldName contains some characters followed by a full stop they will be ignored. So for example a
second organizationName can be input by calling it "1.organizationName".
The actual permitted field names are any object identifier short or long names. These are compiled into
OpenSSL and include the usual values such as commonName, countryName, localityName, organizationName,
organizationalUnitName, stateOrProvinceName. Additionally emailAddress is included as well as name,
surname, givenName, initials, and dnQualifier.
Additional object identifiers can be defined with the oid_file or oid_section options in the
configuration file. Any additional fields will be treated as though they were a DirectoryString.
EXAMPLES
Examine and verify certificate request:
openssl req -in req.pem -text -verify -noout
Create a private key and then generate a certificate request from it:
openssl genrsa -out key.pem 2048
openssl req -new -key key.pem -out req.pem
The same but just using req:
openssl req -newkey rsa:2048 -keyout key.pem -out req.pem
Generate a self signed root certificate:
openssl req -x509 -newkey rsa:2048 -keyout key.pem -out req.pem
Example of a file pointed to by the oid_file option:
1.2.3.4 shortName A longer Name
1.2.3.6 otherName Other longer Name
Example of a section pointed to by oid_section making use of variable expansion:
testoid1=1.2.3.5
testoid2=${testoid1}.6
Sample configuration file prompting for field values:
[ req ]
default_bits = 2048
default_keyfile = privkey.pem
distinguished_name = req_distinguished_name
attributes = req_attributes
req_extensions = v3_ca
dirstring_type = nobmp
[ req_distinguished_name ]
countryName = Country Name (2 letter code)
countryName_default = AU
countryName_min = 2
countryName_max = 2
localityName = Locality Name (eg, city)
organizationalUnitName = Organizational Unit Name (eg, section)
commonName = Common Name (eg, YOUR name)
commonName_max = 64
emailAddress = Email Address
emailAddress_max = 40
[ req_attributes ]
challengePassword = A challenge password
challengePassword_min = 4
challengePassword_max = 20
[ v3_ca ]
subjectKeyIdentifier=hash
authorityKeyIdentifier=keyid:always,issuer:always
basicConstraints = critical, CA:true
Sample configuration containing all field values:
RANDFILE = $ENV::HOME/.rnd
[ req ]
default_bits = 2048
default_keyfile = keyfile.pem
distinguished_name = req_distinguished_name
attributes = req_attributes
prompt = no
output_password = mypass
[ req_distinguished_name ]
C = GB
ST = Test State or Province
L = Test Locality
O = Organization Name
OU = Organizational Unit Name
CN = Common Name
emailAddress = test@email.address
[ req_attributes ]
challengePassword = A challenge password
Example of giving the most common attributes (subject and extensions) on the command line:
openssl req -new -subj "/C=GB/CN=foo" \
-addext "subjectAltName = DNS:foo.co.uk" \
-addext "certificatePolicies = 1.2.3.4" \
-newkey rsa:2048 -keyout key.pem -out req.pem
NOTES
The header and footer lines in the PEM format are normally:
-----BEGIN CERTIFICATE REQUEST-----
-----END CERTIFICATE REQUEST-----
some software (some versions of Netscape certificate server) instead needs:
-----BEGIN NEW CERTIFICATE REQUEST-----
-----END NEW CERTIFICATE REQUEST-----
which is produced with the -newhdr option but is otherwise compatible. Either form is accepted
transparently on input.
The certificate requests generated by Xenroll with MSIE have extensions added. It includes the keyUsage
extension which determines the type of key (signature only or general purpose) and any additional OIDs
entered by the script in an extendedKeyUsage extension.
DIAGNOSTICS
The following messages are frequently asked about:
Using configuration from /some/path/openssl.cnf
Unable to load config info
This is followed some time later by...
unable to find 'distinguished_name' in config
problems making Certificate Request
The first error message is the clue: it can't find the configuration file! Certain operations (like
examining a certificate request) don't need a configuration file so its use isn't enforced. Generation of
certificates or requests however does need a configuration file. This could be regarded as a bug.
Another puzzling message is this:
Attributes:
a0:00
this is displayed when no attributes are present and the request includes the correct empty SET OF
structure (the DER encoding of which is 0xa0 0x00). If you just see:
Attributes:
then the SET OF is missing and the encoding is technically invalid (but it is tolerated). See the
description of the command line option -asn1-kludge for more information.
BUGS
OpenSSL's handling of T61Strings (aka TeletexStrings) is broken: it effectively treats them as ISO-8859-1
(Latin 1), Netscape and MSIE have similar behaviour. This can cause problems if you need characters that
aren't available in PrintableStrings and you don't want to or can't use BMPStrings.
As a consequence of the T61String handling the only correct way to represent accented characters in
OpenSSL is to use a BMPString: unfortunately Netscape currently chokes on these. If you have to use
accented characters with Netscape and MSIE then you currently need to use the invalid T61String form.
The current prompting is not very friendly. It doesn't allow you to confirm what you've just entered.
Other things like extensions in certificate requests are statically defined in the configuration file.
Some of these: like an email address in subjectAltName should be input by the user.
SEE ALSO
x509(1), ca(1), genrsa(1), gendsa(1), config(5), x509v3_config(5)
COPYRIGHT
Copyright 2000-2019 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the OpenSSL license (the "License"). You may not use this file except in compliance with
the License. You can obtain a copy in the file LICENSE in the source distribution or at
<https://www.openssl.org/source/license.html>.