Provided by: postgresql-comparator_2.3.1-5_amd64 
NAME
pg_comparator - efficient table content comparison and synchronization
SYNOPSIS
pg_comparator [options as --help --option --man] conn1 conn2
DESCRIPTION
This script performs a network and time efficient comparison or synchronization of two possibly large
tables in PostgreSQL, MySQL or SQLite databases, so as to detect inserted, updated or deleted tuples
between these tables. The algorithm is efficient especially if the expected differences are relatively
small.
The implementation is quite generic: multi-column keys (but there must be a key!), no assumption of data
types other that they can be cast to text, subset of columns can be used for the comparison, handling of
NULL values...
This script focuses on the comparison algorithm, hence the many options. The fact that it may do
anything useful, such as checking that a replication tool does indeed replicates your data, or such as
synchronizing tables, is a mere side effect.
OPTIONS
Options allow requesting help or to adjust some internal parameters. Short one-letter options are also
available, usually with the first letter of the option name.
"--aggregate=(sum|xor)" or "-a (sum|xor)"
Aggregation function to be used for summaries, either xor or sum. It must operate on the result of
the checksum function. For PostgreSQL and SQLite, the xor aggregate needs to be loaded. There is a
signed/unsigned issue on the key hash when using xor for comparing tables on MySQL or SQLite vs
PostgreSQL. We provide a new "ISUM" aggregate for SQLite because both "SUM" and "TOTAL" do some
incompatible handling of integer overflows.
Default is sum because it is available by default and works in mixed mode.
"--ask-pass"
Ask for passwords interactively. See also "--env-pass" option below.
Default is not to ask for passwords.
"--asynchronous" or "-A", "--no-asynchronous" or "-X"
Whether to run asynchronous queries. This provides some parallelism, however the two connections are
more or less synchronized per query.
Default is to use asynchronous queries to enable some parallelism.
"--checksum-computation=(create|insert)" or "--cc=..."
How to create the checksum table. Use create to use a "CREATE ... AS SELECT ..." query, or insert to
use a "CREATE ...; INSERT ... SELECT ..." query. The former will require an additional counting to
get the table size, so in the end there are two queries anyway. There is a type size issue with the
insert strategy on MySQL, the cumulated key string length must be under 64 bytes.
Default is create because it always works for both databases.
"--checksum-function=fun" or "--cf=fun" or "-c fun"
Checksum function to use, either ck, fnv or md5. For PostgreSQL, MySQL and SQLite the provided ck
and fnv checksum functions must be loaded into the target databases. Choosing md5 does not come free
either: the provided cast functions must be loaded into the target databases and the computation is
more expensive.
Default is ck, which is fast, especially if the operation is cpu-bound and the bandwidth is
reasonably high.
"--checksum-size=n" or "--check-size=n" or "--cs=n" or "-z n"
Tuple checksum size, must be 2, 4 or 8 bytes. The key checksum size is always 4 bytes long.
Default is 8, so that the false negative probability is very low. There should be no reason to
change that.
"--cleanup"
Drop checksum and summary tables beforehand. Useful after a run with "--no-temp" and "--no-clear",
typically used for debugging.
Default is not to drop because it is not needed.
"--clear"
Drop checksum and summary tables explicitly after the computation. Note that they are dropped
implicitly by default when the connection is closed as they are temporary, see "-(-no)-temporary"
option. This option is useful for debugging.
Default is not to clear explicitly the checksum and summary tables, as it is not needed.
"--debug" or "-d"
Set debug mode. Repeat for higher debug levels. See also "--verbose". Beware that some safe gards
about option settings are skipped under debug so as to allow testing under different conditions.
Default is not to run in debug mode.
"--env-pass='var'"
Take password from environment variables "var1", "var2" or "var" for connection one, two, or both.
This is tried before asking interactively if "--ask-pass" is also set.
Default is not to look for passwords from environment variables.
"--expect n" or "-e n"
Total number of differences to expect (updates, deletes and inserts). This option is only used for
non regression tests. See the TESTS section.
"--folding-factor=7" or "-f 7"
Folding factor: log2 of the number of rows grouped together at each stage, starting from the leaves
so that the first round always groups as many records as possible. The power of two allows one to use
masked computations. The minimum value of 1 builds a binary tree.
Default folding factor log2 is 7, i.e. size 128 folds. This default value was chosen after some
basic tests on medium-size cases with medium or low bandwidth. Values from 4 to 8 should be a
reasonable choice for most settings.
"--help" or "-h"
Show short help.
"--key-checksum='kcs'" or "--kcs=..."
Use key checksum attribute of this name, which must be already available in the tables to compare.
This option also requires option "--tuple-checksum". See also the EXAMPLES section below for how to
set a checksum trigger. Consider "--use-key" instead if you already have a reasonably distributed
integer primary key.
Default is to build both key and tuple checksums on the fly.
"--lock", "--no-lock"
Whether to lock tables. Setting the option explicitly overrides the default one way or another. For
PostgreSQL, this option requires "--transaction", which is enabled by default.
Default depends on the current operation: the table is not locked for a comparison, but it is locked
for a synchronization.
"--long-read-len=0" or "-L 0"
Set max size for fetched binary large objects. Well, it seems to be ignored at least by the
PostgreSQL driver.
Default is to keep the default value set by the driver.
"--man" or "-m"
Show manual page interactively in the terminal.
"--max-ratio=0.1"
Maximum relative search effort. The search is stopped if the number of results is above this
threshold expressed relatively to the table size. Use 2.0 for no limit (all tuples were deleted and
new ones are inserted).
Default is 0.1, i.e. an overall 10% difference is allowed before giving up.
"--max-report=n"
Maximum absolute search effort. The search is stopped if the number of differences goes beyond this
threshold. If set, the previous "--max-ratio" option is ignored, otherwise the effort is computed
with the ratio once the table size is known.
Default is to compute the maximum number of reported differences based on the "--max-ratio" option,
with a minimum of 100 differences allowed.
"--max-levels=0"
Maximum number of levels used. Allows one to cut-off folding. 0 means no cut-off. Setting a value of
1 would only use the checksum table, without summaries. A value of 3 or 4 would be raisonable, as
the last levels of the tree are nice for the theoretical complexity formula, but do not improve
performance in practice.
Default is 0.
"--null='text'"
How to handle NULL values. Either hash to hash all values, where NULL has one special hash value, or
text where NULL values are substituted by the "NULL" string.
Default is text because it is faster.
"--option" or "-o"
Show option summary.
"--pg-text-cast"
With PostgreSQL add explicit TEXT casts to work around some typing issues.
"--pg-copy=128"
Experimental option to use PostgreSQL's COPY instead of INSERT/UPDATE when synchronizing, by chunks
of the specified size.
"--prefix='pgc_cmp'"
Name prefix, possibly schema qualified, used for generated comparison tables by appending numbers to
it. Consider changing the prefix if you expect several comparisons to run concurrently against the
same database.
Default is "pgc_cmp". Checksum tables is named "pgc_cmp_1_0" and "pgc_cmp_2_0", and summary tables
are named by increasing the last number.
"--report", "--no-report"
Report differing keys to stdout as they are found.
Default is to report.
"--separator='|'" or "-s '|'"
Separator string or character used when concatenating key columns for computing checksums.
Defaults to the pipe '|' character.
"--size=n"
Assume this value as the table size. It is sufficient for the algorithm to perform well that this
size is in the order of magnitude of the actual table size.
Default is to query the table sizes, which is skipped if this option is set.
"--source-1='DBI:...'", "--source-2='...'" or "-1 '...'", "-2 '...'"
Take full control of DBI data source specification and mostly ignore the comparison authentication
part of the source or target URLs. One can connect with "DBI:Pg:service=backup", use an alternate
driver, set any option allowed by the driver... See "DBD::Pg" and "DBD:mysql" manuals for the
various options that can be set through the DBI data source specification. However, the database
server specified in the URL must be consistent with this source specification so that the queries'
syntax is the right one.
Default is to rely on the two URL arguments.
"--skip-inserts", "--skip-updates", "--skip-deletes"
When synchronizing, do not perform these operations.
Default under "--synchronize" is to do all operations.
"--stats=(txt|csv)"
Show various statistics about the comparison performed in this format. Also, option "--stats-name"
gives the test a name, useful to generate csv files that will be processed automatically.
Default is not to show statistics, because it requires additional synchronizations and is not
necessarily interesting to the user.
"--synchronize" or "-S"
Actually perform operations to synchronize the second table wrt the first. Well, not really, it is
only a dry run. It is actually done if you add "--do-it" or "-D". Save your data before attempting
anything like that!
Default is not to synchronize.
"--temporary", "--no-temporary"
Whether to use temporary tables. If you don't, the tables are kept by default at the end, so they
will have to be deleted by hand. See "--clear" option to request a cleanup. This option is useful for
debugging.
Default is to use temporary tables that are automatically wiped out when the connection is closed.
"--unlogged", "--no-unlogged"
Use unlogged tables for storing checksums. These tables are not transactional, so it may speed up
things a little. However, they are not automatically cleaned up at the end. See "--clear" option to
request a cleanup.
Default is not to use unlogged tables.
"--threads" or "-T", "--no-threads" or "-N"
Highly EXPERIMENTAL feature.
Try to use threads to perform computations in parallel, with some hocus-pocus because perl thread
model does not really work well with DBI. Perl threads are rather heavy and slow, more like
communicating processes than light weight threads, really.
This does NOT work at all with PostgreSQL. It works partially with MySQL, at the price of turning
off "--transaction".
Default is not to use threads, as it does not work for all databases.
"--timeout n"
Timeout comparison after "n" seconds.
Default is no timeout. Be patient.
"--transaction", "--no-transaction"
Whether to wrap the whole algorithm in a single transaction.
Default is to use a wrapping transaction, as it seems to be both faster and safer to do so.
"--tuple-checksum='tcs'" or "--tcs=..."
Use tuple checksum attribute of this name, which must be already available in the tables to compare.
This option requires to set also either "--use-key" or "--key-checksum=..." above. The provided
checksum attributes must not appear in the lists of key and value columns. See also the EXAMPLES
section below for how to set a checksum trigger.
Default is to build both key and tuple checksums on the fly.
"--use-key" or "-u"
Whether to directly use the value of the key to distribute tuples among branches. The key must be
simple, integer, not NULL, and evenly distributed. If you have a reasonably spread integer primary
key, consider using this option to avoid half of the checksum table hash computations.
Default is to hash the key, so as to handle any type, composition and distribution.
"--use-null", "--no-use-null"
Whether to use the information that a column is declared NOT NULL to simplify computations by
avoiding calls to COALESCE to handle NULL values.
Default is to use this information, at the price of querying table metadata.
"--verbose" or "-v"
Be verbose about what is happening. The more you ask, the more verbose.
Default is to be quiet, so that possible warnings or errors stand out.
"--version" or "-V"
Show version information and exit.
"--where=..."
SQL boolean condition on table tuples for partial comparison. Useful to reduce the load if you know
that expected differences are in some parts of your data, say those time-stamped today... The same
condition is passed on both sides, so both tables must be pretty similar so that it works. This is
usually the case.
Default is to compare whole tables.
ARGUMENTS
The two arguments describe database connections with the following URL-like syntax, where square brackets
denote optional parts. Many parts are optional with a default. The minimum syntactically correct
specification is "/", but that does not necessary mean anything useful.
[driver://][login[:pass]@][host][:port]/[base/[[schema.]table[?key[:cols]]]]
See the EXAMPLES section below, and also the "--source-*" options above.
Note that some default value used by DBI drivers may be changed with driver-specific environment
variables, and that DBI also provides its own defaults and overrides, so what actually happens may not
always be clear. Default values for the second URL are mostly taken from the first URL.
driver
Database driver to use. Use pgsql for PostgreSQL, mysql for MySQL, sqlite for SQLite. Heterogeneous
databases may be compared and synchronized, however beware that subtle typing, encoding and casting
issues may prevent heterogeneous comparisons or synchronizations to succeed. Default is pgsql for
the first connection, and same as first for second.
For SQLite, the authentication part of the URL (login, pass, host, port) is expected to be empty,
thus the full URL should look like:
sqlite:///base.db/table?key,col:other,columns
Moreover, setting the PGC_SQLITE_LOAD_EXTENSION environment variable with ":"-separated shared object
files loads these into SQLite.
login
Login to use when connecting to database. Default is username for first connection, and same as first
connection for second.
pass
Password to use when connecting to database. Note that it is a bad idea to put a password as a
command argument. Default is none for the first connection, and the same password as the first
connection for the second if the connection targets the same host, port and uses the same login. See
also "--ask-pass" and "--env-pass" options.
host
Hostname or IP to connect to. Default is the empty string, which means connecting to the database on
localhost with a UNIX socket.
port
TCP-IP port to connect to. Default is 5432 for PostgreSQL and 3306 for MySQL.
base
Database catalog to connect to. Default is username for first connection. Default is same as first
connection for second connection. For SQLite, provide the database file name. The path is relative
by default, but can be made absolute by prepending an additional '/':
sqlite:////var/cache/sqlite/base.db/table?...
schema.table
The possibly schema-qualified table to use for comparison. No default for first connection. Default
is same as first connection for second connection.
Note that MySQL does not have schemas, so the schema part must be empty. However, strangely enough,
their database concept is just like a schema, so one could say that MySQL really does not have
databases, although there is something of that name. Am I clear?
keys
Comma-separated list of key columns. Default is table primary key for first connection. Default is
same as first connection for second connection. The key cannot be empty. If you do not have a way of
identifying your tuples, then there is no point in looking for differences.
cols
Comma-separated list of columns to compare. May be empty. Default is all columns but keys for first
connection. Default is same as first connection for second connection. Beware that "...?key:" means
an empty cols, while "...?key" sets the default by querying table metadata.
EXAMPLES
Compare tables calvin and hobbes in database family on localhost, with key id and columns c1 and c2:
./pg_comparator /family/calvin?id:c1,c2 /family/hobbes
Compare tables calvin in default database on localhost and the same table in default database on sablons,
with key id and column data:
./pg_comparator localhost/family/calvin?id:data sablons/
Synchronize "user" table in database "wikipedia" from MySQL on "server1" to PostgreSQL on "server2".
./pg_comparator -S -D --ask-pass \
mysql://calvin@server1/wikipedia/user pgsql://hobbes@server2/
For PostgreSQL, you may add trigger-maintained key and tuple checksums as:
-- TABLE Foo(id SERIAL PRIMARY KEY, data ... NOT NULL);
-- add a key and tuple checksum attributes
-- the key checksum can be skipped if you use --use-key,
-- for which the key must be a simple NOT NULL integer.
ALTER TABLE Foo
ADD COLUMN key_cs INT4 NOT NULL DEFAULT 0,
ADD COLUMN tup_cs INT8 NOT NULL DEFAULT 0;
-- function to update the tuple checksum
-- if some attributes may be NULL, they must be coalesced
CREATE FUNCTION foo_cs() RETURNS TRIGGER AS $$
BEGIN
-- compute key checksum
NEW.key_cs = cksum4(NEW.id);
-- compute tuple checksum
NEW.tup_cs = cksum8(NEW.id || '|' || NEW.data);
RETURN NEW;
END; $$ LANGUAGE plpgsql;
-- set trigger to call the checksum update function
CREATE TRIGGER foo_cs_trigger
BEFORE UPDATE OR INSERT ON Foo
FOR EACH ROW EXECUTE PROCEDURE foo_cs();
-- if table Foo is not initially empty,
-- update its contents to trigger checksum computations
UPDATE Foo SET id=id;
Then a fast comparison, which does not need to compute the initial checksum table, can be requested with:
./pg_comparator --tcs=tup_cs --kcs=key_cs \
admin@server1/app/Foo?id:data hobbes@server2/
As the primary key is a simple integer, the key_cs could be left out and the comparison could be launched
with:
./pg_comparator --tcs=tup_cs --use-key \
admin@server1/app/Foo?id:data hobbes@server2/
OUTPUT
The output of the command consists of lines describing the differences found between the two tables. They
are expressed in term of insertions, updates or deletes and of tuple keys.
UPDATE k
Key k tuple is updated from table 1 to table 2. It exists in both tables with different values.
INSERT k
Key k tuple does not appear in table 2, but only in table 1. It must be inserted in table 2 to
synchronize it wrt table 1.
DELETE k
Key k tuple appears in table 2, but not in table 1. It must be deleted from 2 to synchronize it wrt
table 1.
In case of tuple checksum collisions, false negative results may occur. Changing the checksum function
would help in such cases. See the ANALYSIS sub-section.
INSTALL
This section describes how to install extensions (functions, casts, aggregates) needed by pg_comparator
for the different target databases.
First, get pg_comparator sources <http://www.coelho.net/pg_comparator/pg_comparator-2.3.1.tgz>.
PostgreSQL
For installing on PostgreSQL, you must ensure that the "pg_config" command found in your path is the one
of the target PostgreSQL server, and that development packages are installed.
Then compile and install the extensions' shared objects:
sh> make pgsql_install
To load the extension files into the target "DB" database, where "..." are the connection options:
sh> psql ... -c 'CREATE EXTENSION pgcmp' DB
To uninstall:
sh> psql ... -c 'DROP EXTENSION pgcmp' DB
sh> make pgsql_uninstall
MySQL
For installing on MySQL, you must ensure that the "mysql_config" command found in your path is the one of
the target MySQL server, and that development packages are installed.
Then compile and install the extensions' shared objects:
sh> make mysql_install
And load the extension files into the database:
sh> mysql ... < PATH-TO-EXTENSION/mysql_casts.sql
sh> mysql ... < PATH-TO-EXTENSION/mysql_checksum.sql
See "mysql_config --plugindir" for the extension directory path. On some systems "PATH-TO-EXTENSION"
might be "/usr/lib/mysql/contrib".
To uninstall:
sh> make mysql_uninstall
SQLite
For installing with SQLite, the corresponding development package is needed.
First compile and install the extensions' shared objects (you may adjust "SQLITE.libdir" make variable to
change the target directory, which is by default "/usr/local/lib"):
sh> make sqlite_install
Then load the extension by executing (to do it always, you may append the line to your ".sqliterc" file):
SELECT load_extension('/usr/local/lib/sqlite_checksum.so');
To uninstall:
sh> make sqlite_uninstall
DEPENDENCES
Three support functions are needed on the database:
1.
The "COALESCE" function takes care of NULL values in columns.
2.
A checksum function must be used to reduce and distribute key and columns values. It may be changed
with the "--checksum" option. Its size can be selected with the "--checksize" option (currently 2, 4
or 8 bytes). The checksums also require casts to be converted to integers of various sizes.
Suitable implementations are available for PostgreSQL and can be loaded into the server by processing
"share/contrib/pgc_checksum.sql" and "share/contrib/pgc_casts.sql". New checksums and casts are also
available for MySQL, see "mysql_*.sql". An loadable implementation of suitable checksum functions is
also available for SQLite, see "sqlite_checksum.*".
The "ck" checksum is based on Jenkins hash <https://en.wikipedia.org/wiki/Jenkins_hash>, which relies
on simple add, shift and xor integer operations. The "fnv" checksum is inspired by FNV hash
<https://en.wikipedia.org/wiki/Fowler_Noll_Vo_hash> (64 bits 1a version) which uses xor and mult
integer operations, although I also added some shift and add to help tweak high bits.
3.
An aggregate function is used to summarize checksums for a range of rows. It must operate on the
result of the checksum function. It may be changed with the "--aggregate" option.
Suitable implementations of a exclusive-or "xor" aggregate are available for PostgreSQL and can be
loaded into the server by processing "share/contrib/xor_aggregate.sql".
The "sqlite_checksum.*" file also provides a "xor" and "sum" aggregates for SQLite that are compatible
with other databases.
Moreover several perl modules are useful to run this script:
• "Getopt::Long" for option management.
• "DBI", "DBD::Pg" to connect to PostgreSQL, "DBD::mysql" to connect to MySQL, and "DBD::SQLite" to
connect to SQLite.
• "Term::ReadPassword" for "--ask-pass" option.
• "Pod::Usage" for doc self-extraction ("--man" "--opt" "--help").
• "threads" for the experimental threaded version with option "--threads".
• "Digest::MD5" for md5 checksum with SQLite.
Modules are only loaded by the script if they are actually required.
ALGORITHM
The aim of the algorithm is to compare the content of two tables, possibly on different remote servers,
with minimum network traffic. It is performed in three phases.
1.
A checksum table is computed on each side for the target table.
2.
A fist level summary table is computed on each side by aggregating chunks of the checksum table. Other
levels of summary aggregations are then performed till there is only one row in the last table, which
then stores a global checksum for the whole initial target tables.
3.
Starting from the upper summary tables, aggregated checksums are compared from both sides to look for
differences, down to the initial checksum table. Keys of differing tuples are displayed.
CHECKSUM TABLE
The first phase computes the initial checksum table T(0) on each side. Assuming that key is the table
key columns, and cols is the table data columns that are to be checked for differences, then it is
performed by querying target table T as follow:
CREATE TABLE T(0) AS
SELECT key AS pk, -- primary key
checksum(key) AS kcs, -- key checksum
checksum(key || cols) AS tcs -- tuple checksum
FROM t;
The initial key is kept, as it will be used to show differing keys at the end. The rational for the kcs
column is to randomize the key-values distribution so as to balance aggregates in the next phase. The
key must appear in the checksum also, otherwise content exchanged between two keys would not be detected
in some cases.
SUMMARY TABLES
Now we compute a set of cascading summary tables by grouping f (folding factor) checksums together at
each stage. The grouping is based on a mask on the kcs column to take advantage of the checksum
randomization. Starting from p=0 we build:
CREATE TABLE T(p+1) AS
SELECT kcs & mask(p+1) AS kcs, -- key checksum subset
XOR(tcs) AS tcs -- tuple checksum summary
FROM T(p)
GROUP BY kcs & mask(p+1);
The mask(p) is defined so that it groups together on average f checksums together: mask(0) = ceil2(size);
mask(p) = mask(p-1)/f; This leads to a hierarchy of tables, each one being a smaller summary of the
previous one:
level 0
checksum table, size rows, i.e. as many rows as the target table.
level 1
first summary table, (size/f) rows.
level p
intermediate summary table, (size/f**p) rows.
level n-1
one before last summary table, less than f rows.
level n
last summary table, mask is 0, 1 row.
It is important that the very same masks are used on both sides so that aggregations are the same,
allowing to compare matching contents on both sides.
SEARCH FOR DIFFERENCES
After all these support tables are built on both sides comes the search for differences. When checking
the checksum summary of the last tables (level n) with only one row, it is basically a comparison of the
checksum of the whole table contents. If they match, then both tables are equal, and we are done.
Otherwise, if these checksums differ, some investigation is needed to detect offending keys.
The investigation is performed by going down the table hierarchy and looking for all kcs for which there
was a difference in the checksum on the previous level. The same query is performed on both side at each
stage:
SELECT kcs, tcs
FROM T(p)
WHERE kcs & mask(p+1) IN (kcs-with-diff-checksums-from-level-p+1)
ORDER BY kcs [and on level 0: , id];
And the results from both sides are merged together. When doing the merge procedure, four cases can
arise:
1.
Both kcs and tcs match. Then there is no difference.
2.
Although kcs does match, tcs does not. Then this kcs is to be investigated at the next level, as the
checksum summary differs. If we are already at the last level, then the offending key can be shown.
3.
No kcs match, one supplemental kcs in the first side. Then this kcs correspond to key(s) that must be
inserted for syncing the second table wrt the first.
4.
No kcs match, one supplemental kcs in the second side. Then this kcs correspond to key(s) that must be
deleted for syncing the second table wrt the first.
Cases 3 and 4 are simply symmetrical, and it is only an interpretation to decide whether it is an insert
or a delete, taking the first side as the reference.
ANALYSIS
Let n be the number of rows, r the row size, f the folding factor, k the number of differences to be
detected, c the checksum size in bits, then the costs to identify differences and the error rate is:
network volume
is better than k*f*ceil(log(n)/log(f))*(c+log(n)). the contents of k blocks of size f is transferred
on the depth of the tree, and each block identifier is of size log(n) and contains a checksum c. It is
independent of r, and you want k<<n. The volume of the SQL requests is about
k*log(n)*ceil(log(n)/log(f)), as the list of non matching checksums k*log(n) may be dragged on the tree
depth.
number of requests (on each side, the algorithm is symmetric)
minimum is 6+ceil(log(n)/log(f)) for equal tables, maximum is 6+2*ceil(log(n)/log(f)).
disk I/O traffic
is about n*r+n*ln(n)*(f/(f-1)).
false negative probability
i.e. part of the tables are considered equal although they are different. With a perfect checksum
function, this is the probability of a checksum collision at any point where they are computed and
should have been different: about k*ceil(log(n)/log(f))*2**-c. For a million row table, expecting 1000
changes with the default algorithm parameter values, this is about 2**10 *3/2**64, that is about one
chance in 2**52 merge runs.
The lower the folding factor f the better for the network volume, but the higher the better for the
number of requests and disk I/Os: the choice of f is a tradeoff.
The lower the checksum size c, the better for the network volume, but the worse for the false negative
probability.
If the available bandwidth is reasonable, the comparison will most likely be cpu-bound: the time is spent
mainly on computing the initial checksum table. Thus if you are planning to check for differences quite
often, consider maintaining a tuple checksum with a trigger, and possibly a key checksum as well, and
invoke with "--tuple-checksum" and either "--key-checksum" or "--use-key".
IMPLEMENTATION ISSUES
The checksum implementation gives integers, which are constant length and easy to manipulate afterwards.
The xor aggregate is a good choice because there is no overflow issue with it, it takes into account all
bits of the input, and it can easily be defined on any binary data. The sum aggregate is also okay, but
it requires some kind of underlying integer type.
NULL values must be taken care appropriately.
The folding factor and all modules are taken as power of two so as to use a masks.
There is a special management of large chunks of deletes or inserts which is implemented although not
detailed in the algorithmic overview and complexity analysis.
There is some efforts to build a PostgreSQL/MySQL compatible implementation of the algorithm, which added
hacks to deal with type conversions and other stuff.
This script is reasonably tested, but due to its proof of concept nature there is a lot of options the
combination of which cannot all be tested.
NOTE
If the tables to compare are in the same database, a simple SQL query can extract the differences.
Assuming Tables T1 and T2 with primary key id and non null contents data, then their differences, that is
how T2 differs from the reference T1, is summarized by the following query:
SELECT COALESCE(T1.id, T2.id) AS key,
CASE WHEN T1.id IS NULL THEN 'DELETE'
WHEN T2.id IS NULL THEN 'INSERT'
ELSE 'UPDATE'
END AS operation
FROM T1 FULL JOIN T2 USING (id)
WHERE T1.id IS NULL -- DELETE
OR T2.id IS NULL -- INSERT
OR T1.data <> T2.data -- UPDATE
REFERENCES
A paper was presented at a conference about this tool and its algorithm: Remote Comparison of Database
Tables by Fabien Coelho, In Third International Conference on Advances in Databases, Knowledge, and Data
Applications (DBKDA), pp 23-28, St Marteen, The Netherlands Antilles, January 2011. ISBN:
978-1-61208-002-4. Copyright IARIA 2011. Online at Think Mind
<http://www.thinkmind.org/index.php?view=article&articleid=dbkda_2011_2_10_30021>.
The algorithm and script was inspired by Taming the Distributed Database Problem: A Case Study Using
MySQL by Giuseppe Maxia in Sys Admin vol 13 num 8, Aug 2004, pp 29-40. See Perl Monks
<http://www.perlmonks.org/index.pl?node_id=381053> for details. In this paper, three algorithms are
presented. The first one compares two tables with a checksum technique. The second one finds UPDATE or
INSERT differences based on a 2-level (checksum and summary) table hierarchy. The algorithm is
asymmetrical, as different queries are performed on the two tables to compare. It seems that the network
traffic volume is in k*(f+(n/f)+r), that it has a probabilistically-buggy merge procedure, and that it
makes assumptions about the distribution of key values. The third algorithm looks for DELETE differences
based on counting, with the implicit assumption that there are only such differences.
In contrast to this approach, our fully symmetrical algorithm implements all three tasks at once, to find
UPDATE, DELETE and INSERT between the two tables. The checksum and summary hierarchical level idea is
reused and generalized so as to reduce the algorithmic complexity.
From the implementation standpoint, the script is as parametric as possible with many options, and makes
few assumptions about table structures, types and values.
SEE ALSO
Michael Nacos made a robust implementation pg51g <http://pgdba.net/pg51g/> based on triggers. He also
noted that although database contents are compared by the algorithm, the database schema differences can
also be detected by comparing system tables which describe them.
Benjamin Mead Vandiver's PhD Thesis Detecting and Tolerating Byzantine Faults in Database Systems,
Massachusset's Institute of Technology, May 2008 (report number MIT-CSAIL-TR-2008-040). There is an
interesting discussion in Chapter 7, where experiments are presented with a Java/JDBC/MySQL
implementation of two algorithms, including this one.
Baron Schwartz discusses comparison algorithms in an online post <http://tinyurl.com/mysql-data-diff-
algorithm>.
Some more links:
• Adept SQL <http://www.adeptsql.com/>
• Altova Database Spy <http://www.altova.com/databasespy/>
• AUI Soft SQLMerger <http://auisoft.com/sqlmerger/>
• Clever Components dbcomparer <http://www.clevercomponents.com/products/dbcomparer/>
• Comparezilla <http://comparezilla.sourceforge.net/>
• Datanamic Datadiff <http://www.datanamic.com/datadiff/>
• DB Balance <http://www.dbbalance.com/db_cmp_pro.htm>
• DBConvert <https://dbconvert.com/postgresql/>
• DBSolo datacomp <http://www.dbsolo.com/datacomp.html>
• dbForge Data Compare <http://www.devart.com/dbforge/sql/datacompare/>
• DiffKit <http://www.diffkit.org/>
• Percona Toolkit <https://www.percona.com/software/mysql-tools/percona-toolkit>
• MySQL DBCompare <https://dev.mysql.com/doc/mysql-utilities/1.6/en/mysqldbcompare.html>
• SQL Server tablediff Utility <http://msdn.microsoft.com/en-US/library/ms162843.aspx>
• Red Gate SQL Data Compare <http://www.red-gate.com/products/sql-development/sql-data-compare/>
• Spectral Core OmegaSync <http://www.spectralcore.com/omegasync/>,
• SQL Delta <http://www.sqldelta.com/>
• SQLite sqldiff <https://www.sqlite.org/sqldiff.html>
• AlfaAlfa SQL Server Comparison Tool <http://www.sql-server-tool.com/>
• SQLyog MySQL GUI <http://www.webyog.com/>
• xSQL Software Data Compare <http://www.xsql.com/products/sql_server_data_compare/>
TESTS
The paper reports numerous performance tests with PostgreSQL under various bandwidth constraints.
Moreover, non regression tests are run over randomly generated tables when the software is upgraded:
sanity - about 30 seconds & 30 runs
Run a comparison, synchronization & check for all databases combinaisons and all working asynchronous
queries and threading options.
fast - about 5 minutes & 360 runs
Run 12 tests similar to the previous one with varrying options (number of key columns, number of
value columns, aggregate function, checksum function, null handling, folding factor, table locking or
not...).
feature - about 5 minutes & 171 or 477 runs
Test various features: cc for checksum computation strategies, auto for trigger-maintained checksums
on PostgreSQL, pgcopy for PostgreSQL copy test, empty for corner cases with empty tables, quote for
table quoting, engine for InnoDB vs MyISAM MySQL backends, width for large columns, nullkey for
possible NULL values in keys, sqlite for SQLite test, mylite for SQLite/MySQL mixed mode with some
restrictions, pglite for SQLite/PostgreSQL mixed mode with some restrictions.
release - about 20 minutes & 944 runs
This is feature with two table sizes, fast, and collisions to test possible hash collisions.
hour - about 1 hour & 2880 runs
A combination of 8 fast validations with varrying table sizes and difference ratio ranging from 0.1%
to 99.9%.
full - about 6 hours & 16128 runs... seldom run
A combinatorial test involving numerous options: aggregation, checksums, null handling, foldings,
number of key and value attributes...
BUGS
All software have bugs. This is a software, hence it has bugs.
Reporting bugs is good practice, so tell me if you find one. If you have a fix, this is even better!
The implementation does not do many sanity checks.
Although the algorithm can work with some normalized columns (say strings are trimmed, lowercased,
Unicode normalized...), the implementation may not work at all.
The script is really tested with integer and text types, issues may arise with other types.
The script handles one table at a time. In order to synchronize several linked tables, you must disable
referential integrity checks, then synchronize each tables, then re-enable the checks.
There is no real attempt at doing some sensible identifier quoting, although quotes provided in the
connection url are kept, so it may work after all for simple enough cases.
There is no neat user interfaces, this is a earthly command line tool. This is not a bug, but a feature.
There are too many options.
Using another language such as Python for this application seems attractive, but there is no cleanly
integrated manual-page style support such as POD, and the documentation is 50% of this script.
Mixed SQLite vs PostgreSQL or MySQL table comparison may not work properly in all cases, because of
SQLite dynamic type handling and reduced capabilities.
The script creates (temporary) tables on both sides for comparing the target tables: this imply that you
must be allowed to do that for the comparison... However, read-only replicas do not allow creating
objects, which mean that you cannot use pg_comparator to compare table contents on a synchronized
replica.
TODO
Allow larger checksum sizes.
Add an option to avoid IN (x,y,...) syntax, maybe with a temporary table to hold values and use a JOIN on
that. I'm not sure about the performance implications, though.
Allow generating the SQL update script without applying it.
Option to generate more compact updates, i.e. only update attributes with different values.
VERSIONS
See web site <http://www.coelho.net/pg_comparator/> for the latest version. Although versions are really
managed with SVN, there is also a github repos <https://github.com/zx80/pg_comparator>.
version 2.3.1 (r1582 on 2017-07-07)
Fix spelling errors in the documentation, reported by Bas Couwenberg. Fix distribution "Makefile".
version 2.3.0 (r1569 on 2017-07-07)
Add new "INSTALL" Section. Turn cast, functions and aggregates into a PostgreSQL extension. Fix
"--where" handling when "--tcs" is used, reported by Kenneth Hammink. Add "--pg-text-cast" option to
work around missing implicit casts, issue reported by Saulius Grigaitis. Documentation updates. The
release validation was run successfully on PostgreSQL 9.6.3 and MySQL 5.7.18.
version 2.2.6 (r1540 on 2015-04-18)
Fix some typos found by Lintian and pointed out by Ivan Mincik. Add support for FNV (Fowler Noll Vo)
version 1a inspired hash functions. Add option to skip inserts, updates or deletes when
synchronizing, which may be useful to deal with foreign keys, issue pointed out by Graeme Bell. The
release validation was run successfully on PostgreSQL 9.4.1 and MySQL 5.5.41.
version 2.2.5 (r1512 on 2014-07-24)
Fix broken URL defaults to use UNIX sockets with an empty host name, per report by Ivan Mincik. Fix
"--where" condition handling with "--pg-copy" in corner cases. Do not take execution timestamps when
not required. Allow a larger number of differences by default for small table comparisons. Add more
sanity checks. Improve some error messages. The release validation was run successfully on
PostgreSQL 9.4b1 and MySQL 5.5.38.
version 2.2.4 (r1506 on 2014-07-13)
Add experimental support for using COPY instead of INSERT/UPDATE for PostgreSQL, in chunks of size
specified with option "--pg-copy", as suggested by Graeme Bell. Minor fix when computing the maximum
number of differences to report. The release validation was run successfully on PostgreSQL 9.4b1 and
MySQL 5.5.37.
version 2.2.3 (r1494 on 2014-04-19)
Improved documentation. Add "--unlogged" option to use unlogged tables. The release validation was
run successfully on PostgreSQL 9.3.4 and MySQL 5.5.35.
version 2.2.2 (r1485 on 2014-01-08)
Fix some warnings reported by Ivan Mincik. Minor doc changes. The release validation was run
successfully on PostgreSQL 9.3.2 and MySQL 5.5.34.
version 2.2.1 (r1480 on 2013-05-09)
Do not die on missing driver in URL, regression reported by Ivan Mincik. The release validation was
run successfully on PostgreSQL 9.2.4 and MySQL 5.5.31.
version 2.2.0 (r1473 on 2013-03-07)
Bug fix by Robert Coup, which was triggered on hash collisions (again). This bug was introduced in
2.1.0 when getting rid of the key separator, and not caught by the validation. Factor out database
dependencies in a separate data structure, so that adding new targets should be simpler in the
future. Add SQLite support. Add experimental Firebird support. Fix some warnings. Update "cksum8"
function to propagate the first checksum half into the computation of the second half. Improved
documentation. Improved validation, in particular with a collisions test. The release and hour
validations were run successfully on PostgreSQL 9.2.3 and MySQL 5.5.29.
version 2.1.2 (r1402 on 2012-10-28)
Fix an issue when table names were quoted, raised by Robert Coup. Improved documentation, especially
Section "SEE ALSO". More precise warning. Improved validation. The release and hour validations
were run successfully on PostgreSQL 9.2.1 and MySQL 5.5.27.
version 2.1.1 (r1375 on 2012-08-20)
Synchronization now handles possible NULLs in keys. Warn if key is nullable or not an integer under
"--use-key". Improved documentation, in particular non regression tests are described. The release
and hour validations were run successfully on PostgreSQL 9.1.4 and MySQL 5.5.24.
version 2.1.0 (r1333 on 2012-08-18)
Add "--tuple-checksum" and "--key-checksum" options so as to use existing possibly trigger-maintained
checksums in the target tables instead of computing them on the fly. Add "--checksum-computation"
option to control how the checksum table is built, either "CREATE ... AS ..." or "CREATE ...; INSERT
...". For MySQL, rely directly on the count returned by "CREATE ... AS" if available. Add "--lock"
option for locking tables, which is enabled when synchronizing. Improve asynchronous query handling,
especially when creating checksum tables and getting initial table counts, and in some other cases.
Remove redundant data transfers from checksum table under option "--use-key". Get rid of the
separator when retrieving keys of differing tuples. Note that it is still used when computing
checksums. Fix bug in bulk insert and delete key recovery under option "--use-key". Fix potential
bug in handling complex conditions with "--where". Change default prefix to pgc_cmp so that it is
clearer that it belongs to pg_comparator. Fix initial count query which was not started
asynchronously under "--tcs". Ensure that if not null detection is in doubt, a column is assumed
nullable and thus is coalesced. Fix query counters so that they are shared under "--threads". Fix
threading for explicit cleanup phase. Warn if nullable key attributes are encountered. Make default
driver for second connection be the same as first. Rename option "--assume-size" as "--size". Add
short documentation about "--debug". Multiple "--debug" set DBI tracing levels as well. Improve the
difference computation code so that the algorithm is more readable. Improve documentation. Add and
improve comments in the code. The release and hour validations were run successfully on PostgreSQL
9.1.4 and MySQL 5.5.24.
version 2.0.1 (r1159 on 2012-08-10)
Add "--source-*" options to allow taking over DBI data source specification. Change default
aggregate to "sum" so that it works as expected by default when mixing PostgreSQL and MySQL
databases. The results are okay with "xor", but more paths than necessary were investigated, which
can unduly trigger the max report limit. Improved documentation. In particular default option
settings are provided systematically. The fast validation was run successfully on PostgreSQL 9.1.4
and MySQL 5.5.24.
version 2.0.0 (r1148 on 2012-08-09)
Use asynchronous queries so as to provide some parallelism to the comparison without the issues
raised by threads. It is enabled by default and can be switched off with option "--no-asynchronous".
Allow empty hostname specification in connection URL to use a UNIX socket. Improve the
documentation, in particular the analysis section. Fix minor typos in the documentation. Add and
fix various comments in the code. The fast validation was run successfully on PostgreSQL 9.1.4 and
MySQL 5.5.24.
version 1.8.2 (r1117 on 2012-08-07)
Bug fix in the merge procedure by Robert Coup that could result in some strange difference reports in
corner cases, when there were collisions on the kcs in the initial checksum table. Fix broken
synchronization with '|' separator, raised by Aldemir Akpinar. Warn about possible issues with large
objects. Add "--long-read-len" option as a possible way to circumvent such issues. Try to detect
these issues. Add a counter for metadata queries. Minor documentation improvements and fixes.
version 1.8.1 (r1109 on 2012-03-24)
Change default separator again, to '|'. Fix "--where" option mishandling when counting, pointed out
by Enrique Corona.
Post release note: the synchronisation is broken with the default separator in 1.8.1, do not use it,
or use --separator='%'.
version 1.8.0 (r1102 on 2012-01-08)
Change default separator to '%', which seems less likely, after issues run into by Emanuel Calvo.
Add more pointers and documentation.
version 1.7.0 (r1063 on 2010-11-12)
Improved documentation. Enhancement and fix by Maxim Beloivanenko: handle quoted table and attribute
names; Work around bulk inserts and deletes which may be undefined. More stats, more precise,
possibly in CSV format. Add timeout and use-null options. Fix subtle bug which occurred sometimes
on kcs collisions in table T(0).
version 1.6.1 (r754 on 2010-04-16)
Improved documentation. Key and columns now defaults to primary key and all other columns of table
in first connection. Password can be supplied from the environment. Default password for second
connection always set depending on the first. Add max ratio option to express the relative maximum
number of differences. Compute grouping masks by shifting left instead of right by default (that is
doing a divide instead of a modulo). Threads now work a little, although it is still quite
experimental. Fix a bug that made perl see differing checksum although they were equal, in some
unclear conditions.
version 1.6.0 (r701 on 2010-04-03)
Add more functions (MD5, SUM) and sizes (2, 4, 8). Remove template parameterization which is much
too fragile to expose. Add a wrapping transaction which may speed up things a little.
Implementation for MySQL, including synchronizing heterogeneous databases. Improved documentation.
Extensive validation/non regression tests.
version 1.5.2 (r564 on 2010-03-22)
More documentation. Improved connection parsing with more sensible defaults. Make the mask
computation match its above documentation with a bottom-up derivation, instead of a simpler top-down
formula which results in bad performances when a power of the factor is close to the size (as pointed
out in Benjamin Mead Vandiver's PhD). This bad mask computation was introduced somehow between 1.3
and 1.4 as an attempt at simplifying the code.
version 1.5.1 (r525 on 2010-03-21)
More documentation. Add "--expect" option for non regression tests.
version 1.5.0 (r511 on 2010-03-20)
Add more links. Fix so that with a key only (i.e. without additional columns), although it could be
optimized further in this case. Integrate patch by Erik Aronesty: More friendly "connection parser".
Add synchronization option to actually synchronize the data.
version 1.4.4 (r438 on 2008-06-03)
Manual connection string parsing.
version 1.4.3 (r424 on 2008-02-17)
Grumble! wrong tar pushed out.
version 1.4.2 (r421 on 2008-02-17)
Minor makefile fix asked for by Roberto C. Sanchez.
version 1.4.1 (r417 on 2008-02-14)
Minor fix for PostgreSQL 8.3 by Roberto C. Sanchez.
version 1.4 (r411 on 2007-12-24)
Port to PostgreSQL 8.2. Better documentation. Fix mask bug: although the returned answer was
correct, the table folding was not. DELETE/INSERT messages exchanged so as to match a 'sync' or
'copy' semantics, as suggested by Erik Aronesty.
version 1.3 (r239 on 2004-08-31)
Project moved to PG Foundry. Use cksum8 checksum function by default. Minor doc updates.
version 1.2 (r220 on 2004-08-27)
Added "--show-all-keys" option for handling big chunks of deletes or inserts.
version 1.1 (r210 on 2004-08-26)
Fix algorithmic bug: checksums must also include the key, otherwise exchanged data could be not
detected if the keys were to be grouped together. Algorithmic section added to manual page. Thanks
to Giuseppe Maxia who asked for it. Various code cleanups.
version 1.0 (r190 on 2004-08-25)
Initial revision.
COPYRIGHT
Copyright (c) 2004-2017, Fabien Coelho <pg dot comparator at coelho dot net> <http://www.coelho.net/>
This software is distributed under the terms of the BSD Licence. Basically, you can do whatever you
want, but you have to keep the license and I'm not responsible for any consequences. Beware, you may
lose your data, your friends or your hairs because of this software! See the LICENSE file enclosed with
the distribution for details.
If you are very happy with this software, I would appreciate a postcard saying so. See my webpage for
current address.