Provided by: php7.4-cli_7.4.3-4ubuntu2.28_amd64 
NAME
php - PHP Command Line Interface 'CLI'
php-cgi - PHP Common Gateway Interface 'CGI' command
SYNOPSIS
php [options] [ -f ] file [[--] args...]
php [options] -r code [[--] args...]
php [options] [-B begin_code] -R code [-E end_code] [[--] args...]
php [options] [-B begin_code] -F file [-E end_code] [[--] args...]
php [options] -- [ args...]
php [options] -a
php [options] -S addr:port [-t docroot]
DESCRIPTION
PHP is a widely-used general-purpose scripting language that is especially suited for Web development and
can be embedded into HTML. This is the command line interface that enables you to do the following:
You can parse and execute files by using parameter -f followed by the name of the file to be executed.
Using parameter -r you can directly execute PHP code simply as you would do inside a .php file when using
the eval() function.
It is also possible to process the standard input line by line using either the parameter -R or -F. In
this mode each separate input line causes the code specified by -R or the file specified by -F to be
executed. You can access the input line by $argn. While processing the input lines $argi contains the
number of the actual line being processed. Further more the parameters -B and -E can be used to execute
code (see -r) before and after all input lines have been processed respectively. Notice that the input is
read from STDIN and therefore reading from STDIN explicitly changes the next input line or skips input
lines.
PHP also contains an built-in web server for application development purpose. By using the -S option
where addr:port point to a local address and port PHP will listen to HTTP requests on that address and
port and serve files from the current working directory or the docroot passed by the -t option.
If none of -r -f -B -R -F -E or -S is present but a single parameter is given then this parameter is
taken as the filename to parse and execute (same as with -f). If no parameter is present then the
standard input is read and executed.
OPTIONS
--interactive
-a Run PHP interactively. This lets you enter snippets of PHP code that directly get
executed. When readline support is enabled you can edit the lines and also have history
support.
--bindpath address:port|port
-b address:port|port
Bind Path for external FASTCGI Server mode (CGI only).
--no-chdir
-C Do not chdir to the script's directory (CGI only).
--no-header
-q Quiet-mode. Suppress HTTP header output (CGI only).
--timing count
-T count Measure execution time of script repeated count times (CGI only).
--php-ini path|file
-c path|file Look for php.ini file in the directory path or use the specified file
--no-php-ini
-n No php.ini file will be used
--define foo[=bar]
-d foo[=bar] Define INI entry foo with value bar
-e Generate extended information for debugger/profiler
--file file
-f file Parse and execute file
--help
-h This help
--hide-args
-H Hide script name (file) and parameters (args...) from external tools. For example you may
want to use this when a php script is started as a daemon and the command line contains
sensitive data such as passwords.
--info
-i PHP information and configuration
--syntax-check
-l Syntax check only (lint)
--modules
-m Show compiled in modules
--run code
-r code Run PHP code without using script tags '<?..?>'
--process-begin code
-B begin_code Run PHP begin_code before processing input lines
--process-code code
-R code Run PHP code for every input line
--process-file file
-F file Parse and execute file for every input line
--process-end code
-E end_code Run PHP end_code after processing all input lines
--syntax-highlight
-s Output HTML syntax highlighted source
--server addr:port
-S addr:port Start built-in web server on the given local address and port
--docroot docroot
-t docroot Specify the document root to be used by the built-in web server
--version
-v Version number
--strip
-w Output source with stripped comments and whitespace
--zend-extension file
-z file Load Zend extension file
args... Arguments passed to script. Use '--' args when first argument starts with '-' or script is
read from stdin
--rfunction name
--rf name Shows information about function name
--rclass name
--rc name Shows information about class name
--rextension name
--re name Shows information about extension name
--rzendextension
name
--rz name Shows information about Zend extension name
--rextinfo name
--ri name Shows configuration for extension name
--ini Show configuration file names
FILES
/etc/php/@PHP_MAJOR_VERSION@.@PHP_MINOR_VERSION@/cli/php.ini
The configuration file for the CLI version of PHP.
+.B /etc/php/@PHP_MAJOR_VERSION@.@PHP_MINOR_VERSION@/cgi/php.ini
+The configuration file for the CGI version of PHP. +.TP +.B
/etc/php/@PHP_MAJOR_VERSION@.@PHP_MINOR_VERSION@/apache2/php.ini +The configuration file
for the version of PHP that apache2 uses.
EXAMPLES
php -r 'echo "Hello World\n";'
This command simply writes the text "Hello World" to standard out.
php -r 'print_r(gd_info());'
This shows the configuration of your gd extension. You can use this to easily check which image
formats you can use. If you have any dynamic modules you may want to use the same ini file that php
uses when executed from your webserver. There are more extensions which have such a function. For
dba use:
php -r 'print_r(dba_handlers(1));'
php -R 'echo strip_tags($argn)."\n";'
This PHP command strips off the HTML tags line by line and outputs the result. To see how it works
you can first look at the following PHP command ´php -d html_errors=1 -i´ which uses PHP to output
HTML formatted configuration information. If you then combine those two ´php ...|php ...´ you'll see
what happens.
php -E 'echo "Lines: $argi\n";'
Using this PHP command you can count the lines being input.
php -R '@$l+=count(file($argn));' -E 'echo "Lines:$l\n";'
In this example PHP expects each input line being a file. It counts all lines of the files specified
by each input line and shows the summarized result. You may combine this with tools like find and
change the php scriptlet.
php -R 'echo "$argn\n"; fgets(STDIN);'
Since you have access to STDIN from within -B -R -F and -E you can skip certain input lines with
your code. But note that in such cases $argi only counts the lines being processed by php itself.
Having read this you will guess what the above program does: skipping every second input line.
TIPS
You can use a shebang line to automatically invoke php from scripts. Only the CLI version of PHP will
ignore such a first line as shown below:
#!/bin/php
<?php
// your script
?>
SEE ALSO
For a more or less complete description of PHP look here:
http://www.php.net/manual/
BUGS
You can view the list of known bugs or report any new bug you found at:
http://bugs.php.net
AUTHORS
The PHP Group: Thies C. Arntzen, Stig Bakken, Andi Gutmans, Rasmus Lerdorf, Sam Ruby, Sascha Schumann,
Zeev Suraski, Jim Winstead, Andrei Zmievski.
Additional work for the CLI sapi was done by Edin Kadribasic, Marcus Boerger and Johannes Schlueter.
A List of active developers can be found here:
http://www.php.net/credits.php
And last but not least PHP was developed with the help of a huge amount of contributors all around the
world.
VERSION INFORMATION
This manpage describes php, version 7.4.3-4ubuntu2.28.
COPYRIGHT
Copyright © The PHP Group
This source file is subject to version 3.01 of the PHP license, that is bundled with this package in the
file LICENSE, and is available through the world-wide-web at the following url:
http://www.php.net/license/3_01.txt
If you did not receive a copy of the PHP license and are unable to obtain it through the world-wide-web,
please send a note to license@php.net so we can mail you a copy immediately.