Provided by: systemd_245.4-4ubuntu3.24_amd64 
NAME
resolvectl, resolvconf, systemd-resolve - Resolve domain names, IPV4 and IPv6 addresses,
DNS resource records, and services; introspect and reconfigure the DNS resolver
SYNOPSIS
resolvectl [OPTIONS...] {COMMAND} [NAME...]
DESCRIPTION
resolvectl may be used to resolve domain names, IPv4 and IPv6 addresses, DNS resource
records and services with the systemd-resolved.service(8) resolver service. By default,
the specified list of parameters will be resolved as hostnames, retrieving their IPv4 and
IPv6 addresses. If the parameters specified are formatted as IPv4 or IPv6 operation the
reverse operation is done, and a hostname is retrieved for the specified addresses.
The program's output contains information about the protocol used for the look-up and on
which network interface the data was discovered. It also contains information on whether
the information could be authenticated. All data for which local DNSSEC validation
succeeds is considered authenticated. Moreover all data originating from local, trusted
sources is also reported authenticated, including resolution of the local host name, the
"localhost" host name or all data from /etc/hosts.
COMMANDS
query HOSTNAME|ADDRESS...
Resolve domain names, IPv4 and IPv6 addresses.
service [[NAME] TYPE] DOMAIN
Resolve DNS-SD[1] and SRV[2] services, depending on the specified list of parameters.
If three parameters are passed the first is assumed to be the DNS-SD service name, the
second the SRV service type, and the third the domain to search in. In this case a
full DNS-SD style SRV and TXT lookup is executed. If only two parameters are
specified, the first is assumed to be the SRV service type, and the second the domain
to look in. In this case no TXT RR is requested. Finally, if only one parameter is
specified, it is assumed to be a domain name, that is already prefixed with an SRV
type, and an SRV lookup is done (no TXT).
openpgp EMAIL@DOMAIN...
Query PGP keys stored as OPENPGPKEY[3] resource records. Specified e-mail addresses
are converted to the corresponding DNS domain name, and any OPENPGPKEY keys are
printed.
tlsa [FAMILY] DOMAIN[:PORT]...
Query TLS public keys stored as TLSA[4] resource records. A query will be performed
for each of the specified names prefixed with the port and family
("_port._family.domain"). The port number may be specified after a colon (":"),
otherwise 443 will be used by default. The family may be specified as the first
argument, otherwise tcp will be used.
status [LINK...]
Shows the global and per-link DNS settings currently in effect. If no command is
specified, this is the implied default.
statistics
Shows general resolver statistics, including information whether DNSSEC is enabled and
available, as well as resolution and validation statistics.
reset-statistics
Resets the statistics counters shown in statistics to zero. This operation requires
root privileges.
flush-caches
Flushes all DNS resource record caches the service maintains locally. This is mostly
equivalent to sending the SIGUSR2 to the systemd-resolved service.
reset-server-features
Flushes all feature level information the resolver learnt about specific servers, and
ensures that the server feature probing logic is started from the beginning with the
next look-up request. This is mostly equivalent to sending the SIGRTMIN+1 to the
systemd-resolved service.
dns [LINK [SERVER...]], domain [LINK [DOMAIN...]], default-route [LINK [BOOL...]], llmnr
[LINK [MODE]], mdns [LINK [MODE]], dnssec [LINK [MODE]], dnsovertls [LINK [MODE]], nta
[LINK [DOMAIN...]]
Get/set per-interface DNS configuration. These commands may be used to configure
various DNS settings for network interfaces. These commands may be used to inform
systemd-resolved or systemd-networkd about per-interface DNS configuration determined
through external means. The dns command expects IPv4 or IPv6 address specifications of
DNS servers to use. The domain command expects valid DNS domains, possibly prefixed
with "~", and configures a per-interface search or route-only domain. The
default-route command expects a boolean parameter, and configures whether the link may
be used as default route for DNS lookups, i.e. if it is suitable for lookups on
domains no other link explicitly is configured for. The llmnr, mdns, dnssec and
dnsovertls commands may be used to configure the per-interface LLMNR, MulticastDNS,
DNSSEC and DNSOverTLS settings. Finally, nta command may be used to configure
additional per-interface DNSSEC NTA domains.
Commands dns, domain and nta can take a single empty string argument to clear their
respective value lists.
For details about these settings, their possible values and their effect, see the
corresponding settings in systemd.network(5).
revert LINK
Revert the per-interface DNS configuration. If the DNS configuration is reverted all
per-interface DNS setting are reset to their defaults, undoing all effects of dns,
domain, default-route, llmnr, mdns, dnssec, dnsovertls, nta. Note that when a network
interface disappears all configuration is lost automatically, an explicit reverting is
not necessary in that case.
OPTIONS
-4, -6
By default, when resolving a hostname, both IPv4 and IPv6 addresses are acquired. By
specifying -4 only IPv4 addresses are requested, by specifying -6 only IPv6 addresses
are requested.
-i INTERFACE, --interface=INTERFACE
Specifies the network interface to execute the query on. This may either be specified
as numeric interface index or as network interface string (e.g. "en0"). Note that
this option has no effect if system-wide DNS configuration (as configured in
/etc/resolv.conf or /etc/systemd/resolve.conf) in place of per-link configuration is
used.
-p PROTOCOL, --protocol=PROTOCOL
Specifies the network protocol for the query. May be one of "dns" (i.e. classic
unicast DNS), "llmnr" (Link-Local Multicast Name Resolution[5]), "llmnr-ipv4",
"llmnr-ipv6" (LLMNR via the indicated underlying IP protocols), "mdns" (Multicast
DNS[6]), "mdns-ipv4", "mdns-ipv6" (MDNS via the indicated underlying IP protocols). By
default the lookup is done via all protocols suitable for the lookup. If used, limits
the set of protocols that may be used. Use this option multiple times to enable
resolving via multiple protocols at the same time. The setting "llmnr" is identical to
specifying this switch once with "llmnr-ipv4" and once via "llmnr-ipv6". Note that
this option does not force the service to resolve the operation with the specified
protocol, as that might require a suitable network interface and configuration. The
special value "help" may be used to list known values.
-t TYPE, --type=TYPE, -c CLASS, --class=CLASS
Specifies the DNS resource record type (e.g. A, AAAA, MX, ...) and class (e.g. IN,
ANY, ...) to look up. If these options are used a DNS resource record set matching the
specified class and type is requested. The class defaults to IN if only a type is
specified. The special value "help" may be used to list known values.
--service-address=BOOL
Takes a boolean parameter. If true (the default), when doing a service lookup with
--service the hostnames contained in the SRV resource records are resolved as well.
--service-txt=BOOL
Takes a boolean parameter. If true (the default), when doing a DNS-SD service lookup
with --service the TXT service metadata record is resolved as well.
--cname=BOOL
Takes a boolean parameter. If true (the default), DNS CNAME or DNAME redirections are
followed. Otherwise, if a CNAME or DNAME record is encountered while resolving, an
error is returned.
--search=BOOL
Takes a boolean parameter. If true (the default), any specified single-label hostnames
will be searched in the domains configured in the search domain list, if it is
non-empty. Otherwise, the search domain logic is disabled.
--raw[=payload|packet]
Dump the answer as binary data. If there is no argument or if the argument is
"payload", the payload of the packet is exported. If the argument is "packet", the
whole packet is dumped in wire format, prefixed by length specified as a little-endian
64-bit number. This format allows multiple packets to be dumped and unambiguously
parsed.
--legend=BOOL
Takes a boolean parameter. If true (the default), column headers and meta information
about the query response are shown. Otherwise, this output is suppressed.
-h, --help
Print a short help text and exit.
--version
Print a short version string and exit.
--no-pager
Do not pipe output into a pager.
COMPATIBILITY WITH RESOLVCONF(8)
resolvectl is a multi-call binary. When invoked as "resolvconf" (generally achieved by
means of a symbolic link of this name to the resolvectl binary) it is run in a limited
resolvconf(8) compatibility mode. It accepts mostly the same arguments and pushes all data
into systemd-resolved.service(8), similar to how dns and domain commands operate. Note
that systemd-resolved.service is the only supported backend, which is different from other
implementations of this command. Note that not all operations supported by other
implementations are supported natively. Specifically:
-a
Registers per-interface DNS configuration data with systemd-resolved. Expects a
network interface name as only command line argument. Reads resolv.conf(5) compatible
DNS configuration data from its standard input. Relevant fields are "nameserver" and
"domain"/"search". This command is mostly identical to invoking resolvectl with a
combination of dns and domain commands.
-d
Unregisters per-interface DNS configuration data with systemd-resolved. This command
is mostly identical to invoking resolvectl revert.
-f
When specified -a and -d will not complain about missing network interfaces and will
silently execute no operation in that case.
-x
This switch for "exclusive" operation is supported only partially. It is mapped to an
additional configured search domain of "~." — i.e. ensures that DNS traffic is
preferably routed to the DNS servers on this interface, unless there are other, more
specific domains configured on other interfaces.
-m, -p
These switches are not supported and are silently ignored.
-u, -I, -i, -l, -R, -r, -v, -V, --enable-updates, --disable-updates, --are-updates-enabled
These switches are not supported and the command will fail if used.
See resolvconf(8) for details on this command line options.
BACKWARDS COMPATIBILITY WITH SYSTEMD-RESOLVE
resolvectl is a multi-call binary, which previously was named "systemd-resolve" and used
slightly different parameters. When it is invoked as "systemd-resolve" (generally achieved
by means of a symbolic link of this name to the resolvectl binary), it runs in
compatibility mode. For details on the specific parameters and calling syntax, see the
output from systemd-resolve --help. Calling the binary as "systemd-resolve" is deprecated
and should only be done for backwards compatibility. All current and new use should call
the binary as "resolvectl".
EXAMPLES
Example 1. Retrieve the addresses of the "www.0pointer.net" domain
$ resolvectl query www.0pointer.net
www.0pointer.net: 2a01:238:43ed:c300:10c3:bcf3:3266:da74
85.214.157.71
-- Information acquired via protocol DNS in 611.6ms.
-- Data is authenticated: no
Example 2. Retrieve the domain of the "85.214.157.71" IP address
$ resolvectl query 85.214.157.71
85.214.157.71: gardel.0pointer.net
-- Information acquired via protocol DNS in 1.2997s.
-- Data is authenticated: no
Example 3. Retrieve the MX record of the "yahoo.com" domain
$ resolvectl --legend=no -t MX query yahoo.com
yahoo.com. IN MX 1 mta7.am0.yahoodns.net
yahoo.com. IN MX 1 mta6.am0.yahoodns.net
yahoo.com. IN MX 1 mta5.am0.yahoodns.net
Example 4. Resolve an SRV service
$ resolvectl service _xmpp-server._tcp gmail.com
_xmpp-server._tcp/gmail.com: alt1.xmpp-server.l.google.com:5269 [priority=20, weight=0]
173.194.210.125
alt4.xmpp-server.l.google.com:5269 [priority=20, weight=0]
173.194.65.125
...
Example 5. Retrieve a PGP key
$ resolvectl openpgp zbyszek@fedoraproject.org
d08ee310438ca124a6149ea5cc21b6313b390dce485576eff96f8722._openpgpkey.fedoraproject.org. IN OPENPGPKEY
mQINBFBHPMsBEACeInGYJCb+7TurKfb6wGyTottCDtiSJB310i37/6ZYoeIay/5soJjlMyf
MFQ9T2XNT/0LM6gTa0MpC1st9LnzYTMsT6tzRly1D1UbVI6xw0g0vE5y2Cjk3xUwAynCsSs
...
Example 6. Retrieve a TLS key ("tcp" and ":443" could be skipped)
$ resolvectl tlsa tcp fedoraproject.org:443
_443._tcp.fedoraproject.org IN TLSA 0 0 1 19400be5b7a31fb733917700789d2f0a2471c0c9d506c0e504c06c16d7cb17c0
-- Cert. usage: CA constraint
-- Selector: Full Certificate
-- Matching type: SHA-256
SEE ALSO
systemd(1), systemd-resolved.service(8), systemd.dnssd(5), systemd-networkd.service(8),
resolvconf(8)
NOTES
1. DNS-SD
https://tools.ietf.org/html/rfc6763
2. SRV
https://tools.ietf.org/html/rfc2782
3. OPENPGPKEY
https://tools.ietf.org/html/rfc7929
4. TLSA
https://tools.ietf.org/html/rfc6698
5. Link-Local Multicast Name Resolution
https://tools.ietf.org/html/rfc4795
6. Multicast DNS
https://www.ietf.org/rfc/rfc6762.txt