Ubuntu Manpage: rx, rb, rz - XMODEM, YMODEM, ZMODEM (Batch) file receive

NAME

       rx, rb, rz - XMODEM, YMODEM, ZMODEM (Batch) file receive

SYNOPSIS

       rz [- +8abeOpqRtTuUvy]
       rb [- +abqRtuUvy]
       rx [- abceqRtuUv] file
       [-][v]rzCOMMAND

DESCRIPTION

This program uses error correcting protocols to receive files over a dial-in serial port from a variety
of programs running under PC-DOS, CP/M, Unix, and other operating systems. It is invoked from a shell
prompt manually, or automatically as a result of an "sz file ..." command given to the calling program.

While rz is smart enough to be called from cu(1), very few versions of cu(1) are smart enough to allow rz
to work properly. Unix flavors of Professional-YAM are available for such dial-out application.

Rz (Receive ZMODEM) receives files with the ZMODEM batch protocol. Pathnames are supplied by the sending
program, and directories are made if necessary (and possible). Normally, the "rz" command is
automatically issued by the calling ZMODEM program, but some defective ZMODEM implementations may require
starting rz the old fashioned way.

Rb receives file(s) with YMODEM, accepting either standard 128 byte sectors or 1024 byte sectors (YAM sb
-k option). The user should determine when the 1024 byte block length actually improves throughput
without causing lost data or even system crashes.

If True YMODEM (Omen Technology trademark) file information (file length, etc.) is received, the file
length controls the number of bytes written to the output dataset, and the modify time and file mode (iff
non zero) are set accordingly.

If no True YMODEM file information is received, slashes in the pathname are changed to underscore, and
any trailing period in the pathname is eliminated. This conversion is useful for files received from
CP/M systems. With YMODEM, each file name is converted to lower case unless it contains one or more
lower case letters.

Rx receives a single file with XMODEM or XMODEM-1k protocol. The user should determine when the 1024
byte block length actually improves throughput without causing problems. The user must supply the file
name to both sending and receiving programs. Up to 1023 garbage characters may be added to the received
file.

Rz may be invoked as rzCOMMAND (with an optional leading - as generated by login(1)). For each received
file, rz will pipe the file to ``COMMAND filename'' where filename is the name of the transmitted file
with the file contents as standard input.

Each file transfer is acknowledged when COMMAND exits with 0 status. A non zero exit status terminates
transfers.

A typical use for this form is rzrmail which calls rmail(1) to post mail to the user specified by the
transmitted file name. For example, sending the file "caf" from a PC-DOS system to rzrmail on a Unix
system would result in the contents of the DOS file "caf" being mailed to user "caf".

On some Unix systems, the login directory must contain a link to COMMAND as login sets SHELL=rsh which
disallows absolute pathnames. If invoked with a leading ``v'', rz will be verbose (see v option). The
following entry works for Unix SYS III/V:
rzrmail::5:1::/bin:/usr/local/rzrmail
If the SHELL environment variable includes rsh , rbash or rksh (restricted shell), rz will not accept
absolute pathnames or references to a parent directory, will not modify an existing file, and removes any
files received in error.

If rz is invoked with stdout and stderr to different datasets, Verbose is set to 2, causing frame by
frame progress reports to stderr. This may be disabled with the q option.

OPTIONS

The meanings of the available options are:

-+, --append
append received data to an existing file (ZMODEM, ASCII only).
-a, --ascii
Convert files to Unix conventions by stripping carriage returns and all characters beginning with
the first Control Z (CP/M end of file).
-b, --binary
Binary (tell it like it is) file transfer override.
-B NUMBER, --bufsize NUMBER
Buffer NUMBER bytes before writing to disk. Default ist 32768, which should be enough for most
situations. If you have a slow machine or a bad disk interface or suffer from other hardware
problems you might want to increase the buffersize. -1 or auto use a buffer large enough to
buffer the whole file. Be careful with this options - things normally get worse, not better, if
the machine starts to swap.
-c, --with-crc
XMODEM only. Use 16 bit CRC (normally a one byte checksum is used).
-C, --allow-remote-commands
allow remote command execution ( insecure ). This allows the sender to execute an arbitrary
command through system () or execl (). Default is to disable this feature (?). This option is
ignored if running in restricted mode.
-D, --null
Output file data to /dev/null; for testing. (Unix only)
--delay-startup N
Wait N seconds before doing anything.
-e, --escape
Force sender to escape all control characters; normally XON, XOFF, DLE, CR-@-CR, and Ctrl-X are
escaped.
-E, --rename
Rename incoming file if target filename already exists. The new file name will have a dot and a
number (0..999) appended.
-h, --help
give help screen.
-m N, --min-bps N
Stop transmission if BPS-Rate (Bytes Per Second) falls below N for a certain time (see --min-bps-
time option).
-M N, --min-bps-time
Used together with --min-bps. Default is 120 (seconds).
-O, --disable-timeouts
Disable read timeout handling code. This makes lrz hang if the sender does not send any more, but
increases performance (a bit) and decreases system load (through reducing the number of system
calls by about 50 percent).

Use this option with care.
--o-sync
Open output files in synchronous write mode. This may be useful if you experience errors due to
lost interrupts if update (or bdflush or whoever this daemon is called on your system) writes the
buffers to the disk.

This option is ignored and a warning is printed if your systems doesn't support O_SYNC.
-p, --protect
(ZMODEM) Protect: skip file if destination file exists.
-q, --quiet
Quiet suppresses verbosity.
-r, --resume
Crash recovery mode. lrz tries to resume interrupted file transfers.
-R, --restricted
Enter more restricted mode. lrz will not create directories or files with a leading dot if this
option is given twice.

See SECURITY for mode information about restricted mode.
-s HH:MM, --stop-at HH:MM
Stop transmission at HH hours, MM minutes. Another variant, using +N instead of HH:MM, stops
transmission in N seconds.
-S, --timesync
Request timesync packet from the sender. The sender sends its system time, causing lrz to complain
about more then 60 seconds difference.

Lrz tries to set the local system time to the remote time if this option is given twice (this
fails if lrz is not run by root).

This option makes lrz incompatible with certain other ZModems. Don't use it unless you know what
you are doing.
--syslog[=off]
turn syslogging on or off. the default is set at configure time. This option is ignored if no
syslog support is compiled in.
-t TIM, --timeout TIM
Change timeout to TIM tenths of seconds. This is ignored if timeout handling is turned of through
the O option.
--tcp-client ADDRESS:PORT
Act as a tcp/ip client: Connect to the given port.

See --tcp-server for more information.

--tcp-server
Act as a server: Open a socket, print out what to do, wait for connection.

You will normally not want to use this option as lrzsz is the only zmodem which understands what
to do (private extension). You might want to use this if you have to use zmodem (for which reason
whatever), and cannot use the --tcp option of lsz (perhaps because your telnet doesn't allow to
spawn a local program with stdin/stdout connected to the remote side).

If you use this option you have to start lsz with the --tcp-client ADDRESS:PORT option. lrz will
print the address and port on startup.

Use of this option imposes a security risk, somebody else could connect to the port in between.
See SECURITY for details.
-U, --unrestrict
turn off restricted mode (this is not possible if running under a restricted shell).
--version
prints out version number.
-v, --verbose
Verbose causes a list of file names to be appended to stderr. More v's generate more output.
-wN, --windowsize N
Set window size to N.
-X, --xmodem
use XMODEM protocol.
-y, --overwrite
Yes, clobber any existing files with the same name.
--ymodem
use YMODEM protocol.
-Z, --zmodem
use ZMODEM protocol.

SECURITY

       Contrary  to  the original ZMODEM lrz defaults to restricted mode. In restricted mode lrz will not accept
       absolute pathnames or references to a parent directory, will not modify an existing file, and removes any
       files received in error. Remote command execution is disabled.

       To  use  a more restricted mode set the environment variable ZMODEM_RESTRICTED or give the R option. This
       disables creation of subdirectories and invisible files.

       Restricted mode may be turned off with the U option, unless lrz runs under a restricted shell.

       Use of the
              --tcp-client or --tcp-server options imposes a security risk, as somebody else  could  connect  to
              the  port  before you do it, and grab your data. If there's strong demand for a more secure mode i
              might introduce some sort of password challenge.

ENVIRONMENT

       lrz uses the following environment variables:

       SHELL  lrz recognizes a restricted shell if this variable includes rsh or rksh

       ZMODEM_RESTRICTED
              lrz enters the more restricted mode if the variable is set.

EXAMPLES

       (Pro-YAM command)
              <ALT-2>
              Pro-YAM Command: sz *.h *.c
              (This automatically invokes rz on the connected system.)

NOTES

       Sending serial data to timesharing minicomputers at  sustained  high  speeds  has  been  known  to  cause
       lockups,  system halts, kernel panics, and occasional antisocial behaviour.  When experimenting with high
       speed input to a system, consider rebooting  the  system  if  the  file  transfers  are  not  successful,
       especially if the personality of the system appears altered.

       The Unix "ulimit" parameter must be set high enough to permit large file transfers.

       The  TTY input buffering on some systems may not allow long blocks or streaming input at high speed.  You
       should suspect this problem when you can't send data to the Unix system  at  high  speeds  using  ZMODEM,
       YMODEM-1k  or  XMODEM-1k,  when  YMODEM  with  128  byte blocks works properly.  If the system's tty line
       handling is really broken, the serial port or the entire system may not survive  the  onslaught  of  long
       bursts of high speed data.

       The  DSZ  or  Pro-YAM  zmodem  l numeric parameter may be set to a value between 64 and 1024 to limit the
       burst length ("zmodem pl128").

       32 bit CRC code courtesy Gary S. Brown.  Directory creation code from John Gilmore's PD TAR program.

BUGS

       Calling rz from most versions of cu(1) doesn't work because cu's receive process fights rz for characters
       from the modem.

       Programs  that  do not properly implement the specified file transfer protocol may cause sz to "hang" the
       port for a minute or two.  Every reported instance of this problem has been  corrected  by  using  ZCOMM,
       Pro-YAM, or other program with a correct implementation of the specified protocol.

       Many  programs  claiming  to  support YMODEM only support XMODEM with 1k blocks, and they often don't get
       that quite right.

       Pathnames are restricted to 127 characters.  In XMODEM single  file  mode,  the  pathname  given  on  the
       command  line  is  still processed as described above.  The ASCII option´s CR/LF to NL translation merely
       deletes CR´s; undos(omen) performs a more intelligent translation.

VMS VERSION

       The VMS version does not set the file time.

       VMS C Standard I/O and RMS may interact to modify file contents unexpectedly.

       The VMS version does not support invocation as rzCOMMAND .  The current  VMS  version  does  not  support
       XMODEM, XMODEM-1k, or YMODEM.

       According to the VMS documentation, the buffered input routine used on the VMS version of rz introduces a
       delay of up to one second for each protocol transaction.  This delay may be significant  for  very  short
       files.   Removing  the  "#define  BUFREAD"  line  from  rz.c  will eliminate this delay at the expense of
       increased CPU utilization.

       The VMS version causes DCL to generate a random off the wall error message under some  error  conditions;
       this is a result of the incompatibility of the VMS "exit" function with the Unix/MSDOS standard.

ZMODEM CAPABILITIES

       Rz  supports  incoming  ZMODEM  binary  (-b),  ASCII  (-a),  protect  (-p), clobber (-y), and append (-+)
       requests.  The default is protect (-p) and binary (-b).

       The Unix versions support ZMODEM command execution.

FILES

       rz.c, crctab.c, rbsb.c, zm.c, zmodem.h Unix source files.

       rz.c, crctab.c, vrzsz.c, zm.c, zmodem.h, vmodem.h, vvmodem.c, VMS source files.

                                                      OMEN                                                 RZ(1)