Provided by: sgrep_1.94a-4build1_amd64 
NAME
sgrep - search a file for a structured pattern
SYNOPSIS
sgrep [-aCcDdhiIlNnPqSsTtV] [-g option] [-O filename] [-o "format"] [-p preprocessor] [-w char list] [-x
filename] [-e] expression [filename ...]
sgrep [-aCcDdhiIlNnPqSsTtV] [-g option] [-O filename] [-o "format"] [-p preprocessor] [-w char list] [-x
filename] -f filename [-e expression] [filename ...]
sgrep [-aCcDdhiIlNnPqSsTtV] [-g option] [-O filename] [-o "format"] [-p preprocessor] [-w char list] [-x
filename] -f filename -F filename [-e expression]
sgrep -h
DESCRIPTION
sgrep (structured grep) is a tool for searching text files and filtering text streams using structural
criteria. The data model of sgrep is based on regions, which are non-empty substrings of text. Regions
are typically occurrences of constant strings or meaningful text elements, which are recognizable through
some delimiting strings. Regions can be arbitrarily long, arbitrarily overlapping, and arbitrarily
nested.
sgrep uses patterns called region expressions to express which regions of the input text are output to
standard output. The selection of regions is based on mutual containment and ordering conditions of the
regions, expressed by the region expression.
Region expressions are read by default first from file $HOME/.sgreprc, or if it doesn't exist, from file
/usr/lib/sgreprc, and then from the command line. Different behavior can be specified through command
line options.
Input files are processed one by one (i.e., regions cannot extend over file boundaries), except if the -S
flag is given, in which case sgrep takes the concatenation of the input files as its input text. If no
input files are given, sgrep reads the standard input. Standard input can also be specified as an input
file by giving hyphen '-' as a file name.
The selected regions are output in increasing order of their start positions. If several output regions
overlap, a minimal region that covers them all is output, by default, instead of outputting each of them
separately.
OPTIONS
-a Act as a filter: display the matching regions, possibly formatted according to the output format,
interleaved with the rest of the text. (See the description of option -o below.)
-C Display copyright notice.
-c Display only the count of the regions that match the expression.
-D Display verbose progress output. NOTE: This is used for debugging purposes only and may not
function in future versions of sgrep.
-d Display each matching region once, even if the regions overlap or nest.
-e expression
Search the input text for occurrences of expression.
-f file
Read the region expression from the named file. Filename - refers to stdin.
-F filename
Read list of input files from filename instead of command line
-g option
Set scanner option. option can be any of:
sgml use SGML scanner
html use HTML scanner (currently same as SGML scanner)
xml use XML scanner
sgml-debug
show recognized SGML tokens
include-entities
automatically include system entities
-h Display a short help.
-i Ignore case distinctions in phrases.
-I Switches to indexing mode, when given as first option
-l Long output format: precede each output region by a line which indicates the ordinal number of the
region, the name of the file where the region starts, the length of the region in bytes, the start
and end positions of the region within the entire input text, the start position of the region
within the file containing the start, and the end position of the region within the file
containing the end.
-N Do not add a newline after the last output region.
-n Suppress reading $HOME/.sgreprc or /usr/lib/sgreprc.
-O file
Read the output format from file. See the description of output formats below.
-o format
Set the output format. The format is displayed for each output region with any occurrences of the
following place holders substituted:
%f name of the file containing the start of the region
%s start position of the region
%e end position of the region
%l length of the region in bytes (i.e., %e-%s+1)
%i start position of the region in the file where the region begins
%j end position of the region in the file where the region ends
%r text of the region. "%r" is the default output format.
%n gets the ordinal number of the region
-P Display the (preprocessed) region expression without executing it.
-p preprocessor
Apply preprocessor to the region expression before evaluating it.
-S Stream mode. With this option sgrep considers it's input files as a continuous stream, so that
regions may extend across file boundaries.
sgrep -S file_1 ... file_n
is similar to
cat file_1 ... file_n | sgrep
except that the latter creates a temporary disk file of the input stream. Sgrep may use much more
memory when run with the -S option, since then it cannot release its internal region lists between
processing each file.
-s Short output format (default): do not format the text of the output regions, and display
overlapping parts of regions only once.
-T Display statistics about the execution.
-t Display time usage.
-V Display version information.
-v Verbose mode. Shows what is going on.
-w char list
Set the list of characters used to recognize words.
-x filename
Use given index file instead of scanner. Implies -S.
-- No more options.
A list of options can be given also as the value of the environment variable SGREPOPT.
SYNTAX OF EXPRESSIONS
region_expr -> basic_expr
| operator_expr
operator_expr -> region_expr ['not'] 'in' basic_expr
| region_expr ['not'] 'containing' basic_expr
| region_expr ['not'] 'equal' basic_expr
| region_expr 'or' basic_expr
| region_expr 'extracting' basic_expr
| region_expr '..' basic_expr
| region_expr '_.' basic_expr
| region_expr '._' basic_expr
| region_expr '__' basic_expr
| region_expr 'quote' basic_expr
| region_expr '_quote' basic_expr
| region_expr 'quote_' basic_expr
| region_expr '_quote_' basic_expr
| 'concat' '(' region_expr ')'
| 'inner' '(' region_expr ')'
| 'outer' '(' region_expr ')'
| 'join' '(' integer ',' region_expr ')'
basic_expr -> phrase
| 'start'
| 'end'
| 'chars'
| constant_list
| '(' region_expr ')'
phrase -> '"' char [ char ... ] '"'
constant_list -> '[' ']' | '[' regions ']'
regions -> region
| region regions
region -> '(' integer ',' integer ')'
Note that region expressions are left-associative. This means, for example, that an expression
'"<a>".."</a>" or "</b>"'
evaluates to the regions starting with "<a>" and ending with "</a>", or comprising only the string
"</b>". In order to obtain the regions that begin with "<a>" and end with either "</a>" or "</b>", one
should indicate the proper order of evaluation using parentheses:
"<a>".. ("</a>" or "</b>")
Expressions can also contain comments, which start with '#' and extend to the end of the line. However, a
'#'-sign in a phrase does not begin a comment.
SEMANTICS OF EXPRESSIONS
The value of an expression is a set of regions of input text that satisfy the expression.
Value v(basic_expr) of a basic expression:
v(phrase):=
the set of regions of input text whose text equals the text of the phrase.
v('start'):=
a set consisting of single-character regions for the first position of each input file. If the -S
option is given, the value is a set containing a single region that comprises the first character
in the input stream.
v('end'):=
a set consisting of single-character regions for the last position of each input file. If the -S
option is given, the value is a set containing a single region that comprises the last character
in the input stream.
v('chars'):=
a set consisting of all single-character regions.
v([ ]):=
an empty set.
v([(s_1,e_1) (s_1,e_2) ... (s_n,e_n)]):=
a set consisting of regions r_i for each i = 1,...,n, where the start position of region r_i is
s_i and its end position is e_i. The positions have to be nonnegative integers, and the regions
have to be given in increasing order of their start positions; regions with a common start
positions have to be given in increasing order of their end positions. The positions are counted
from the first character of each input file, unless the -S option is given, in which case the
positions are counted starting from the beginning of the input stream. The number of the first
position in a file or a stream is zero.
v('('region_expr')'):= v(region_expr).
Value v(operator_expr) of operator expressions:
v(region_expr 'in' basic_expr):=
the set of the regions in v(region_expr) that are contained in some region in v(basic_expr). A
region x is contained in another region y if and only if the start position of x is greater than
the start position of y and the end position of x is not greater than the end position of y, or
the end position of x is smaller than the end position of y and the start position of x is not
smaller than the start position of y.
v(region_expr 'not' 'in' basic_expr):=
the set of the regions in v(region_expr) that are not contained in any region in v(basic_expr).
v(region_expr 'containing' basic_expr):=
the set of the regions in v(region_expr) that contain some region in v(basic_expr).
v(region_expr 'not' 'containing' basic_expr):=
the set of the regions in v(region_expr) that do not contain any region in v(basic_expr).
v(region_expr 'equal' basic_expr):=
The set of regions, which occur in both v(region_expr) and v(basic_expr).
v(region_expr 'not equal' basic_expr):=
The set of regions, which occur in v(region_expr) but do not occur in v(basic_expr).
v(region_expr 'or' basic_expr):=
the set of the regions that appear in v(region_expr) or in v(basic_expr) or in both.
v(region_expr 'extracting' basic_expr):=
the set of the non-empty regions that are formed of the regions in v(region_expr) by extracting an
overlap with any region in v(basic_expr). For example, the value of
'[(1,4) (3,6) (7,9)] extracting [(2,5) (4,7)]'
consists of the regions (1,1) and (8,9).
v(region_expr '..' basic_expr):
The value of this expression consists of the regions that can be formed by pairing regions from
v(region_expr) with regions from v(basic_expr). The pairing is defined as a generalization of the
way how nested parentheses are paired together "from inside out". For this we need to be able to
compare the order of regions, which may be overlapping and nested. This ordering is defined as
follows.
Let x and y be two regions. We say that region x precedes region y if the end position of x is
smaller than the start position of y. We say that region x is later than region y if the end
position of x is greater than the end position of y, or if they end at the same position and the
start of x is greater than the start of y. Region x is earlier than region y if the start
position of x is smaller than the start position of y, or if they start at the same position and
the end position of x is less than the end position of y. Now a region x from v(region_expr) and
a region y from v(basic_expr) are paired in expression v(region_expr '..' basic_expr) if and only
if
1. x precedes y,
2. x is not paired with any region from v(basic_expr) which is earlier than y, and
3. y is not paired with any region from v(region_expr) which is later than x.
The pairing of regions x and y forms a region that extends from the start position of x to the end
position of y.
v(region_expr '._' basic_expr):
The pairing of the regions from v(region_expr) and the regions from v(basic_expr) is defined
similarly to v(region_expr '..' basic_expr) above, except that the pairing of regions x and y now
forms a region which extends from the start position of x to the position immediately preceding
the start of y.
v(region_expr '_.' basic_expr):=
The pairing of the regions from v(region_expr) and the regions from v(basic_expr) is defined
similarly to v(region_expr '..' basic_expr) above, except that the pairing of regions x and y now
forms a region which extends from the position immediately following the end position of x to the
end position of y.
v(region_expr '__' basic_expr):=
The pairing of the regions from v(region_expr) and the regions from v(basic_expr) is defined
similarly to v(region_expr '..' basic_expr) above, except that now the pairing of regions x and y
forms a region which extends from the text position immediately following the end of x to the text
position immediately preceding the start of y. Possibly resulting empty regions are excluded from
the result.
v(region_expr 'quote' basic_expr):
The value of this expression consists of the regions that extend from the start position of a
"left-quote region" in v(region_expr) to the end position of a corresponding "right-quote region"
in v(basic_expr). The regions in the result are non-nesting and non-overlapping. The left-quote
regions and the right-quote regions are defined as follows:
• The earliest region (see above) in v(region_expr) is a possible left-quote region.
• For each possible left-quote region x, the earliest region in v(basic_expr) preceded by x
is its right-quote region.
• For each right-quote region y in v(basic_expr), the earliest region in v(region_expr)
preceded by y is a possible left-quote region.
The below example query finds C-style non-nesting comments:
"/*" quote "*/"
The below example query finds strings between quotation marks:
"\"" quote "\""
(Notice the difference to expression "\"" .. "\"", which would evaluate to any substring of input text
that starts with a quotation mark and ends with the next quotation mark.)
The variants _quote, quote_ and _quote_ are analogical to the operators _., ._ and __, in the sense that
the "quote regions" originating from the expression on the side of the underscore _ are excluded from the
result regions. (In the case of _quote_ any possibly resulting empty regions are excluded from the
result.)
v('concat' '(' region_expr ')' ):=
the set of the longest regions of input text that are covered by the regions in v(region_expr).
v('inner' '(' region_expr ')' ):=
the set of regions in v(region_expr) that do not contain any other region in v(region_expr). Note
that for any region expression A, the expression inner(A) is equivalent to (A not containing A).
v('outer' '(' region_expr ')' ):=
the set of regions in v(region_expr) that are not contained in any other region in v(region_expr).
Note that for any region expression A, the expression outer(A) is equivalent to (A not in A).
v('join' '(' n ',' region_expr ')' ):
The value of this expression is formed by processing the regions of v(region_expr) in increasing
order of their start positions (and in increasing order of end positions for regions with a common
start). Each region r produces a result region beginning at the start of r and extending to the
end of the (n-1)th region after r. The operation is useful only with non-nesting regions.
Especially, when applied to 'chars', it can be used to express nearness conditions. For example,
'"/*" quote "*/" in join(10,chars)'
selects comments "/* ... */" which are at most 10 characters long.
EXAMPLES OF REGION EXPRESSIONS
Count the number of occurrences of string "sort" in file eval.c:
sgrep -c '"sort"' eval.c
Show all blocks delimited by braces in file eval.c:
sgrep '"{" .. "}"' eval.c
Show the outermost blocks that contain "sort" or "nest":
sgrep 'outer("{" .. "}" containing ("sort" or "nest"))'\
eval.c
Show all lines containing "sort" but no "nest" in files with an extension .c, preceded by the name of the
file:
sgrep -o "%f:%r" '"\n" _. "\n" containing "sort" \
not containing "nest"' *.c
(Notice that this query would omit the first line, since it has no preceding new-line character '\n',
and also the last one, if not terminated by a new-line. For a correct way to express text lines, see the
definition of the LINE macro below.)
Show the beginning of conditional statements, consisting of "if" followed by a condition in parentheses,
in files *.c. The query has to disregard "if"s appearing within comments "/* ... */" or on compiler
control lines beginning with '#':
sgrep '"if" not in ("/*" quote "*/" or ("\n#" .. "\n")) \
.. ("(" .. ")")' *.c
Show the if-statements containing string "access" in their condition part appearing in the main function
of the program in source files *.c:
sgrep '"if" not in ("/*" quote "*/" or ("\n#" .. "\n")) \
.. ("(" .. ")") containing "access" \
in ("main(" .. ("{" .. "}")) \
.. ("{" .. "}" or ";")' *.c
We see that complicated conditions can become rather illegible. The use of carefully designed macros can
make expressing queries much easier. For example, one could give the below m4 macro processor
definitions in a file, say, c.macros:
define(BLOCK,( "{" .. "}" ))
define(COMMENT,( "/*" quote "*/" ))
changecom(%)
define(CTRLINE,( "#" in start or "\n#"
_. ("\n" or end) ))
define(IF_COND,( "if" not in (COMMENT or CTRLINE)
.. ("(" .. ")")))
Then the above query could be written more intuitively as
sgrep -p m4 -f c.macros -e 'IF_COND containing "access"\
in ( "main(" .. BLOCK ) .. (BLOCK or ";")' *.c
OPTIMIZATION
sgrep performs common subexpression elimination on the query expression, so that recurring sub-
expressions are evaluated only once. For example, in expression
'(" " or "\n" or "\t") .. (" " or "\n" or "\t")'
the sub-expression
'(" " or "\n" or "\t")'
is evaluated only one.
DIAGNOSTICS
Exit status is 0 if any matching regions are found, 1 if none, 2 for syntax errors or inaccessible
files (even if matching regions were found).
ENVIRONMENT
One's own default options for sgrep can be given as a value of the environment variable SGREPOPT. For
example, executing
setenv SGREPOPT '-p m4 -o %r\n'
makes sgrep to apply m4 preprocessor to the expression and display each output region as such followed by
a line feed.
FILES
Sgrep tries to read the contents of the files $HOME/.sgreprc and /usr/lib/sgreprc. Generally useful
macro definitions may be placed in these files. Using m4 (or some other) macro processor, for example
the following definitions could go in one of these files:
define(BLANK,( " " or "\t" or "\n"))
define(LEND,( "\n" or end ))
define(LINE,( start .. LEND or ("\n" _. LEND) ))
define(NUMERAL,( "1" or "2" or "3" or "4" or "5" or
"6" or "7" or "8" or "9" or "0" ))
FUTURE EXTENSIONS
• Regular expressions (The most important missing feature)
• Built-in macro preprocessor
• More operations
• Indexing for large static texts
AUTHORS
Jani Jaakkola and Pekka Kilpelainen, University of Helsinki, Department of Computer Science, 1995.
BUGS
Sgrep may use lots of memory, when evaluating complex queries on big files. When sgrep reads its input
text from a pipe, it copies it to a temporary file. sgrep does not have regular expressions in search
patters.
SEE ALSO
awk(1), ed(1), grep(1)
sgrep home page at http://www.cs.helsinki.fi/~jjaakkol/sgrep.html
SGREP(1)