Provided by: netdiag_1.2-1build1_amd64 
NAME
statnet,statnetd - views the statistics of Ethernet and PLIP/PPP/SLIP for TCP, IP, IPX, Appletalk, etc
SYNOPSIS
statnet [ -agipstuh ] [-k key]
statnetd [ -adgipstuh ] [-k key] [-n name] [-w interface]
DESCRIPTION
statnetd is the privileged daemon which collects network data.
statnet views the current usage statistics of your Ethernet and PLIP/PPP/SLIP for TCP, IP, IPX,
Appletalk, and more. It is terminated by typing "q".
It shows:
- kilobytes per second on ethernet, PPP, and other interfaces.
- the percentage load of ethernet capacity.
- frames per second.
- how many frames of each type (like IP, 802.2, and some Appletalk or TCP frames) were seen.
The purpose is to give some idea of the quantity and type of network activity (flashing lights on the hub
are minimally informative). Other tools such as tcpdump are needed for detailed analysis.
Only certain frames/packets were shown in the first versions. Now the data for many more packets
encountered on your net are shown. Only certain TCP/UDP ports are known (under port 1024 by default),
and TCP/UDP traffic to unknown port numbers is not shown, although the presence of the frames are shown
in protocol counts.
Note that statnetd uses IPC shared memory so there can be many clients such as statnet running. Other
clients, such as an SNMP agent, may also be using the data. The statnetd IPC shared memory is enabled
for DIPC, so the data from one copy of statnetd is available to all machines on a DIPC cluster.
OPTIONS
For statnetd, most options select the type of data to be collected. For statnet, most options select the
type of data to be displayed. Defaults collect and display most data.
-a Appletalk protocol
-d Daemonize ( statnetd only). Run as a background process. Probably should be entered as
"/usr/local/bin/statnetd -d" in /etc/rc.d/rc.local.
-g General statistics
-i IP Protocols
-k key Use key as the shared memory key. Base 16 recognized with '0x' prefix, base 8 with '0' prefix,
otherwise key is in base 10.
-n name
Server or network name ( statnetd only). The label other than uname(2) nodename to label the data
with. Often a computer or network name is used.
-p PLIP/PPP/SLIP statistics
-s IEEE 802.2 SAP protocol
-t TCP/IP protocol
-u UDP/IP protocol
-w interface
Specify an interface to monitor other than the default "eth0" ( statnetd only). See /proc/net/dev
for a list of interfaces.
-h print a short help message
DISPLAY
The statnet display client appearance will vary depending upon options and display type. It can operate
under "curses" or "ncurses" libraries (compile time option). Another popular trick on X-Windows is to
open an xterm window which is tall and as narrow as the "General" display, so the subwindows appear below
each other.
Totals may vary slightly due to the data being captured as it is being collected, as more packets may
arrive while the totals are being prepared for display (fortunately packets arrive slowly compared to the
speed of copying the totals).
The percentage numbers are the percent of the total number of frames during the display period.
If the network interface reports errors, a summary is reported near the bottom of the "General" display.
Error behavior depends upon your interface and device driver. (Error reporting not working in 3.2)
SAMPLE TEXT DISPLAY
STATISTICS OF NETWORKS
GENERAL Frame: 341/6 sec ===== 802.2 SAP ===== ==== TCP/IP PORTS ===
KB/s Frame/s AvLen fragment 18 5.3%
all 5.98 56 107 NetBIOS: 216 63.3% www: 0 0.0%
eth 5.98 56 107 0xB4: 11 3.2% echo: 0 0.0%
SNAP: 9 2.6% NetBIOS: 0 0.0%
RPL: 1 0.3% ftp: 0 0.0%
SNA: 4 1.2%
NetWare: 2 0.6%
SpanTree: 3 0.9%
802.2 pkt/sec: 41
Ethernet Load 0.49%
490 err/Hr( 0%) 490 drop/Hr ===== PROTOCOLS ===== ==== UDP/IP PORTS ===
NetB Dg: 56 16.4%
==== IP PROTOCOLS ==== IEEE802.3 246 72.1% snmp: 0 0.0%
Ethernet 77 22.6% fragment 0 0.0%
UDP: 58 17.0% ARP 13 3.8% NetB NS: 0 0.0%
TCP: 18 5.3% HP Probe 3 0.9% domain: 2 0.6%
ICMP: 1 0.3% DEC LAT 2 0.6% ntp: 0 0.0%
Novell 0 0.0% loc-srv: 0 0.0%
timed: 0 0.0%
syslog: 0 0.0%
Other: 0 0.0%
FILES
The files /etc/services, /etc/opt/statnet/services, and services in the current directory are read in
that order for port number definitions. Later definitions override previous ones. A few names are
replaced with shorter or more recognizable names (ie, nameserver is replaced with DNS).
File format:
telnet 23/tcp # Telnet
The above line specifies that TCP port 23 is used for the telnet service.
The file /etc/protocols is also read with the getprotoent(3) routine for IP protocol definitions.
PROBLEMS
By default the eth0 ethernet device is monitored. Monitoring SLIP or PPP devices may not work. Data
from devices other than the one specified may be shown, depending upon operating system characteristics
of a promiscuous socket.
Many networking numbers are compiled within the program and cannot be updated without altering a source
file. But this is still more informative than a flashing light on the hub.
AUTHOR
Jeroen Baekelandt is the original author.
jeroenb@igwe.vub.ac.be
we47143@vub.ac.be
Scot E. Wilcoxon is present maintainer of Statnet. Made numerous alterations to the original.
Generalized to tally arbitrary packet types rather than specific ones, changed to use daemon and shared
memory instead of coroutines. Modified for glibc2(libc6) under 2.1.1* kernels.
sewilco@fieldday.mn.org
Philip Hands maintains Debian netdiag packaging, and added glibc2(libc6) alterations.
phil@hands.com
Christoph Lameter wrote the first version of this man page, and did Debian netdiag packaging.
chris@waterf.org
COPYRIGHT GPL
Copyright 21DEC2002 Scot E. Wilcoxon All Rights Reserved
STATNET(1)