Provided by: svn2git_2.4.0-3_all 
NAME
svn2git - migrates from svn to git
DESCRIPTION
svn2git - is a tiny utility for migrating projects from Subversion to Git while keeping the trunk,
branches and tags where they should be. It uses git-svn to clone an svn repository and does some clean-up
to make sure branches and tags are imported in a meaningful way, and that the code checked into master
ends up being what's currently in your svn trunk rather than whichever svn branch your last commit was
in.
SYNOPSIS
svn2git [-h|--help] [--rebase] [-m|--metadata] [-v|--verbose]
[--rootistrunk][--notrunk][--nobranches]
[--authors AUTHORS_FILE]
[--exclude REGEX]
[--branches BRANCHES_PATH]
[--notags][--no-minimize]
[--rebasebranch REBASEBRANCH]
[--revision START_REV:[END_REV]]
[--trunk TRUNK_PATH]
[--username NAME]
[--password PASS]
OPTIONS REFERENCE
--rebase
Instead of cloning a new project, rebase an existing one against SVN
--username NAME
Username for transports that needs it (http(s), svn)
--password PASS
Username for transports that needs it (http(s), svn)ssword for transports that needs it (http(s),
svn)
--trunk TRUNK_PATH
Subpath to trunk from repository URL (default: trunk)
--branches BRANCHES_PATH
Subpath to branches from repository URL (default: branches); can be used multiple times
--tags TAGS_PATH
Subpath to tags from repository URL (default: tags); can be used multiple times
--rootistrunk
Use this if the root level of the repo is equivalent to the trunk and there are no tags or
branches
--notrunk
Do not import anything from trunk
--nobranches
Do not try to import any branches
--notags
Do not try to import any tags
--no-minimize-url
Accept URLs as-is without attempting to connect to a higher level directory
--revision START_REV[:END_REV]
Start importing from SVN revision START_REV; optionally end at END_REV
-m, --metadata
Include metadata in git logs (git-svn-id)
--authors AUTHORS_FILE
Path to file containing svn-to-git authors mapping (default: ~/.svn2git/authors)
--exclude REGEX
Specify a Perl regular expression to filter paths when fetching; can be used multiple times
-v, --verbose
Be verbose in logging -- useful for debugging issues
-h, --help
Show this message
EXAMPLES
For instance this could be a situation in a svn repository:
trunk ...
branches
1.x 2.x
tags 1.0.0 1.0.1 1.0.2 1.1.0 2.0.0
git-svn will go through the commit history to build a new git repo. It will import all branches and tags
as remote svn branches, whereas what you really want is git-native local branches and git tag objects. So
after importing this project you'll get:
$ git branch
* master
$ git branch -a
* master
1.x
2.x
tags/1.0.0
tags/1.0.1
tags/1.0.2
tags/1.1.0
tags/2.0.0
trunk
$ git tag -l
[ empty ]
After svn2git is done with your project, you'll get this instead:
$ git branch
* master
1.x
2.x
$ git tag -l
1.0.0
1.0.1
1.0.2
1.1.0
2.0.0
Finally, it makes sure the HEAD of master is the same as the current trunk of the svn repo.
INSTALLATION
Make sure you have git, git-svn, and ruby installed. svn2git is a ruby wrapper around git's native SVN
support through git-svn. It is possible to have git installed without git-svn installed, so please do
verify that you can run $ git svn successfully. For a Debian-based system, the installation of the
prerequisites would look like:
$ sudo apt-get install git-core git-svn ruby rubygems
Once you have the necessary software on your system, you can install svn2git through rubygems, which will
add the svn2git command to your PATH.
$ sudo gem install svn2git
USAGE
There are several ways you can create a git repo from an existing svn repo. The differentiating factor is
the svn repo layout. Below is an enumerated listing of the varying supported layouts and the proper way
to create a git repo from a svn repo in the specified layout.
1. The svn repo is in the standard layout of (trunk, branches, tags) at the root
level of the repo.
$ svn2git http://svn.example.com/path/to/repo
2. The svn repo is NOT in standard layout and has only a trunk and tags at the
root level of the repo.
$ svn2git http://svn.example.com/path/to/repo --trunk dev \
--tags rel --nobranches
3. The svn repo is NOT in standard layout and has only a trunk at the root level
of the repo.
$ svn2git http://svn.example.com/path/to/repo --trunk trunk \
--nobranches --notags
4. The svn repo is NOT in standard layout and has no trunk, branches, or tags at
the root level of the repo. Instead the root level of the repo is equivalent to
the trunk and there are no tags or branches.
$ svn2git http://svn.example.com/path/to/repo --rootistrunk
5. The svn repo is in the standard layout but you want to exclude the massive doc
directory and the backup files you once accidentally added.
$ svn2git http://svn.example.com/path/to/repo --exclude doc \
--exclude '.*~$'
6. The svn repo actually tracks several projects and you only want to migrate one
of them.
$ svn2git http://svn.example.com/path/to/repo/nested_project \
--no-minimize-url
If the svn repo is password protected.
$ svn2git http://svn.example.com/path/to/repo \
--username <<user_with_perms>>
You need to migrate starting at a specific svn revision number.
$ svn2git http://svn.example.com/path/to/repo \
--revision <<starting_revision_number>>
You need to migrate starting at a specific svn revision number, ending at a
specific revision number.
$ svn2git http://svn.example.com/path/to/repo --revision \
<<starting_revision_number>>:<<ending_revision_number>>
Include metadata (git-svn-id) in git logs.
$ svn2git http://svn.example.com/path/to/repo --metadata
The above will create a git repository in the current directory with the git
version of the svn repository. Hence, you need to make a directory that you
want your new git repo to exist in, change into it and then run one of the
above commands. Note that in the above cases the trunk, branches, tags options
are simply folder names relative to the provided repo path. For example if you
specified trunk=foo branches=bar and tags=foobar it would be referencing
http://svn.example.com/path/to/repo/foo as your trunk, and so on.
However, in case 4 it references the root of the repo as trunk.
As of svn2git 2.0 there is a new feature to pull in the latest changes from SVN
into your git repository created with svn2git. This is a one way sync, but
allows you to use svn2git as a mirroring tool for your SVN repositories.
The command to call is:
$ cd <EXISTING_REPO> && svn2git --rebase
AUTHORS
To convert all your svn authors to git format, create a file somewhere on your system with the list of
conversions to make, one per line, for example:
jcoglan = James Coglan <jcoglan@never-you-mind.com>
stnick = Santa Claus <nicholas@lapland.com>
Then pass an _authors_ option to svn2git pointing to your file:
$ svn2git http://svn.example.com/path/to/repo \
--authors ~/authors.txt
Alternatively, you can place the authors file into ~/.svn2git/authors and svn2git will load it out of
there. This allows you to build up one authors file for all your projects and have it loaded for each
repository that you migrate.
If you need a jump start on figuring out what users made changes in your svn repositories the following
command sequence might help. It grabs all the logs from the svn repository, pulls out all the names from
the commits, sorts them, and then reduces the list to only unique names. So, in the end it outputs a list
of usernames of the people that made commits to the svn repository which name on its own line. This would
allow you to easily redirect the output of this command sequence to ~/.svn2git/authors and have a very
good starting point for your mapping.
$ svn log --quiet | grep -E "r[0-9]+ | .+ |" \
| cut -d'|' -f2 | sed 's/^ //' | sort | uniq
Or, for a remote URL:
$ svn log --quiet http://path/to/root/of/project \
| grep -E "r[0-9]+ | .+ |" | cut -d'|' -f2 \
| sed 's/^ //' | sort | uniq
DEBUGGING
If you're having problems with converting your repository and you're not sure why, try turning on verbose
logging. This will print out more information from the underlying git-svn process.
You can turn on verbose logging with the -v or --verbose flags, like so:
$ svn2git http://svn.yoursite.com/path/to/repo --verbose
FAQ
1. Why don't the tags show up in the master branch? The tags won't show up in the master branch because
the tags are actually tied to the commits that were created in svn when the user made the tag. Those
commits are the first (head) commit of branch in svn that is associated with that tag. If you want to
see all the branches and tags and their relationships in gitk you can run the following: gitk --all
For further details please refer to FAQ #2.
2. Why don't you reference the parent of the tag commits instead? In svn you are forced to create what
are known in git as annotated tags. It just so happens that svn annotated tags allow you to commit
change sets along with the tagging action. This means that the svn annotated tag is a bit more complex
then just an annotated tag it is a commit which is treated as an annotated tag. Hence, for there to be
a true 1-to-1 mapping between git and svn we have to transfer over the svn commit which acts as an
annotated tag and then tag that commit in git using an annotated tag.
If we were to reference the parent of this svn tagged commit there could potentially be situations
where a developer would checkout a tag in git and the resulting code base would be different than if
they checked out that very same tag in the original svn repo. This is only due to the fact that the
svn tags allow changesets in them, making them not just annotated tags.