Ubuntu Manpage: xosview - X based system monitor

NAME

       xosview - X based system monitor

SYNOPSIS

       xosview [options]

DESCRIPTION

       xosview  is  a  monitor which displays the status of several system parameters.  These include CPU usage,
       load average, memory, swap space, network usage and more.  Each resource is displayed as a horizontal bar
       which is separated into color coded regions showing how much of the resource is being put to a particular
       use.

       xosview runs on several platforms (Linux, NetBSD, FreeBSD, OpenBSD, DragonflyBSD, some  Solaris  systems,
       IRIX  6.5, HPUX and GNU).  Not all of the meters described below are supported on all platforms.  Some of
       the meters may appear different depending upon the platform xosview is running on.   Note  that  *BSD  is
       used  as  an  abbreviation  for  all  the  supported  BSD  operating  systems  (NetBSD, FreeBSD, OpenBSD,
       DragonflyBSD).

       Load: Kernel reported load average
          all platforms  :  load
          Linux          :  load | CPU frequency
          *BSD           :  load | CPU frequency
          SunOS5         :  load | CPU frequency

       CPU Usage
          Linux  : user | nice | system | soft-interrupt | interrupt | io-wait |
                   guest | niced guest | stolen | idle
          *BSD   : user | nice | system | interrupt | idle
          SunOS5 : user | system | wait | idle
          IRIX   : user | system | interrupt | wait | idle
          HPUX   : user | nice | system | interrupt | idle

       Memory Usage
          Linux  : used | buffers | slab | map | cache | free
          FreeBSD: active | inactive | wired | cache | free
          DFBSD  : active | inactive | wired | cache | free
          OpenBSD: active | inactive | wired | free
          NetBSD : active | inactive | wired | free
          SunOS5 : kernel | zfs | other | free
          IRIX   : kernel | fs | user | free
          HPUX   : text | used | other | free
          GNU    : active | inactive | wired | free

       Swap Usage
          Linux  : used | free
          *BSD   : used | free
          SunOS5 : used | free
          HPUX   : used | free
          GNU    : used | free

       Disk Usage: Throughput to/from local disk, per second
          Linux  : in | out | idle
          *BSD   : in | out | idle
          SunOS5 : in | out | idle

       Page Swapping: Pages to/from swap, per second
          Linux  : in | out | idle
          *BSD   : in | out | idle
          SunOS5 : in | out | idle
          HPUX   : in | out | idle
          GNU    : in | out | idle

       Network Usage
          Linux  : in | out | idle
          *BSD   : in | out | idle
          SunOS5 : in | out | idle

       GFX Usage: Framebuffer exchanges, per second
          IRIX   : swapbuffers

       Interrupts: "leds" which blink when an interrupt occurs
          Linux  : IRQs
          *BSD   : IRQs

       Interrupt Rate: Per second
          Linux  : interrupts | free
          *BSD   : interrupts | free
          SunOS5 : interrupts | free

       Serial Port Status: "leds" which show the serial port parameters
          Linux  : LSR and MSR

       Battery Level: charge and status of batteries
          Linux  : available | used
          *BSD   : available | used

       RAID: State of disks in a software RAID array
          Linux  : disk0 disk1 disk2 ... diskN | rebuild

       Wireless Link
          Linux  : quality

       Sensors: Readings from sensors
          Linux  : I2C/hwmon sensors (lmstemp)
                   Intel Core/AMD K8+/VIA C7 temperature (coretemp)
                   ACPI thermal zones (acpitemp)
          *BSD   : I2C sensors (bsdsensor)
                   Intel Core/AMD K8+ temperature (coretemp)

       Typing a 'q' in the window will terminate xosview.

OPTIONS

       Most of these command line options are just a convenient way to set one or more of  xosview's  resources.
       Please see the RESOURCES section for more details on what the resource is for.

       -v
              Displays the version number.

       -name name
              Sets  the Resource name xosview will use (same as the -name option for typical X applications like
              xterm).  When  performing  resource  lookups,  xosview  will  look  under  name,  and  then  under
              ``xosview''.  For an example, perform the following (as documented in README.netbsd):
                       xrdb -merge Xdefaults.stipple
                       xosview -name xosvstipple &
                       xosview -name xosvstipplebw &

       -display display
              Sets the X display to display.  This option overrides the xosview*display resource.

       -font font
              Specifies the font xosview will use for labels.  This option overrides the xosview*font resource.

       -title title
              This  option  sets the name xosview will tell the window manager to use for the X window and icon.
              This option overrides the xosview*title resource.

       -geometry geometry_string
              Sets the X geometry to geometry_string.  This option overrides the xosview*geometry resource.

       -captions
              This option overrides the xosview*captions resource.  It is equivalent to setting xosview*captions
              to "False".

       +captions
              This option overrides the xosview*captions resource.  It is equivalent to setting xosview*captions
              to "True".
       -labels
              This option overrides the xosview*labels resource.  It is equivalent to setting xosview*labels  to
              "False".

       +labels
              This  option overrides the xosview*labels resource.  It is equivalent to setting xosview*labels to
              "True".
       -usedlabels
              This  option  overrides  the  xosview*usedlabels  resource.    It   is   equivalent   to   setting
              xosview*usedlabels to "False".

       +usedlabels
              This   option   overrides   the   xosview*usedlabels   resource.   It  is  equivalent  to  setting
              xosview*usedlabels to "True".
       -cpu
              This option overrides the xosview*cpu resource.   It  is  equivalent  to  setting  xosview*cpu  to
              "False".

       +cpu
              This  option  overrides  the  xosview*cpu  resource.   It  is equivalent to setting xosview*cpu to
              "True".

       -cpus
              Force the display of a single meter for all CPUs in the  system.  This  option  is  equivalent  to
              setting xosview*cpuFormat to "single".

       +cpus
              Force   the   display   of  all  CPUs  in  the  system.  This  option  is  equivalent  to  setting
              xosview*cpuFormat to "all".

       -load
              This option overrides the xosview*load resource.  It is  equivalent  to  setting  xosview*load  to
              "False".

       +load
              This  option  overrides  the  xosview*load  resource.  It is equivalent to setting xosview*load to
              "True".
       -mem
              This option overrides the xosview*mem resource.   It  is  equivalent  to  setting  xosview*mem  to
              "False".

       +mem
              This  option  overrides  the  xosview*mem  resource.   It  is equivalent to setting xosview*mem to
              "True".
       -swap
              This option overrides the xosview*swap resource.  It is  equivalent  to  setting  xosview*swap  to
              "False".

       +swap
              This  option  overrides  the  xosview*swap  resource.  It is equivalent to setting xosview*swap to
              "True".
       -battery
              This option overrides the xosview*battery resource.  It is equivalent to  setting  xosview*battery
              to "False".

       +battery
              This  option  overrides the xosview*battery resource.  It is equivalent to setting xosview*battery
              to "True".
       -gfx
              This option overrides the xosview*gfx resource.   It  is  equivalent  to  setting  xosview*gfx  to
              "False".

       +gfx
              This  option  overrides  the  xosview*gfx  resource.   It  is equivalent to setting xosview*gfx to
              "True".
       -wireless
              This option overrides the xosview*wireless resource.  It is equivalent to setting xosview*wireless
              to "False".

       +wireless
              This option overrides the xosview*wireless resource.  It is equivalent to setting xosview*wireless
              to "True".
       -net
              This option overrides the xosview*net resource.   It  is  equivalent  to  setting  xosview*net  to
              "False".

       +net
              This  option  overrides  the  xosview*net  resource.   It  is equivalent to setting xosview*net to
              "True".

       -network maxbandwidth
       -networkBW maxbandwidth
       -networkBandwidth maxbandwidth
              These options override the xosview*netBandwidth resource.  They cause xosview to display  a  meter
              that  will shows network usage, with a maximum bandwidth of maxbandwidth.  Notice that setting the
              bandwidth to 0 no longer disables the meter -- use the ``-net'' option instead.

       -page
              This option overrides the xosview*page resource.  It is  equivalent  to  setting  xosview*page  to
              "False".

       +page
              This  option  overrides  the  xosview*page  resource.  It is equivalent to setting xosview*page to
              "True".

       -pagespeed val
              This option overrides the xosview*pageBandWidth resource.  The resource xosview*pageBandWidth will
              be set to val.

       -disk
              This  option  overrides  the  xosview*disk  resource.  It is equivalent to setting xosview*disk to
              "False".

       +disk
              This option overrides the xosview*disk resource.  It is  equivalent  to  setting  xosview*disk  to
              "True".
       -int
              This  option  overrides  the  xosview*int  resource.   It  is equivalent to setting xosview*int to
              "False".

       +int
              This option overrides the xosview*int resource.   It  is  equivalent  to  setting  xosview*int  to
              "True".

       -ints +ints
       -interrupts +interrupts
              Equivalent to -int and +int.

       -irqrate
              This  option  overrides the xosview*irqrate resource.  It is equivalent to setting xosview*irqrate
              to "False".

       +irqrate
              This option overrides the xosview*irqrate resource.  It is equivalent to  setting  xosview*irqrate
              to "True".

       -intrate +intrate
              Equivalent to -irqrate and +irqrate.

       -lmstemp
              This  option  overrides the xosview*lmstemp resource.  It is equivalent to setting xosview*lmstemp
              to "False".

       +lmstemp
              This option overrides the xosview*lmstemp resource.  It is equivalent to  setting  xosview*lmstemp
              to "True".
       -coretemp
              This option overrides the xosview*coretemp resource.  It is equivalent to setting xosview*coretemp
              to "False".

       +coretemp
              This option overrides the xosview*coretemp resource.  It is equivalent to setting xosview*coretemp
              to "True".
       -acpitemp
              This option overrides the xosview*acpitemp resource.  It is equivalent to setting xosview*acpitemp
              to "False".

       +acpitemp
              This option overrides the xosview*acpitemp resource.  It is equivalent to setting xosview*acpitemp
              to "True".
       -bsdsensor
              This   option   overrides   the   xosview*bsdsensor   resource.    It  is  equivalent  to  setting
              xosview*bsdsensor to "False".

       +bsdsensor
              This  option  overrides  the  xosview*bsdsensor   resource.    It   is   equivalent   to   setting
              xosview*bsdsensor to "True".

       -xrm resource_string
              This  switch  allows  any of xosview's resources to be set on the command line.  An example of how
              the xosview*memFreeColor could be set using this option is shown below  (Note  the  use  of  "  to
              prevent   the   shell   from   expanding   ´*´   or   from   creating   two   separate  arguments,
              ´xosview*memfreeColor:´ and ´purple´):
                     -xrm "xosview*memFreeColor: purple"

X RESOURCES

The following is a list of X resources supported by xosview. Each has a default value assigned to it.
These values can be found in the file Xdefaults which can be obtained in the source distribution of
xosview. They can be overridden in the usual places (/usr/lib/X11/app-defaults/XOsview,
$HOME/.Xdefaults, etc.).

It should be noted that it is OK to have a resource defined for a port of xosview that does not support
the feature the resource configures. Xosview will simply ignore the resources that are set for it but
not supported on a given platform.

General Resources

xosview*title: name
The string that xosview will use for the X window title. Normally xosview will use
'xosview@machine_name' for a title. This resource overrides the default behavior.

xosview*geometry: geometry_string
This is a standard X geometry string that defines the size and location of the X window used by
xosview.

xosview*display: name
The name of the display where xosview will contact the X server for drawing its window.

xosview*pixmapName: name
The filename of an X pixmap (xpm) file for use as a background image.

xosview*captions: (True or False)
If True then xosview will display meter captions.

xosview*labels: (True or False)
If True then xosview will display meter labels.

xosview*meterLabelColor: color
The color to use for the meter labels.

xosview*usedlabels: (True or False)
If True then xosview will display labels that show the percentage of the resource (or absolute
amount, depending on the meter) being used. This option requires that the labels option also be
set to True.

xosview*usedLabelColor: color
The color to use for "used" labels.

xosview*borderwidth: width
The width of the border for the xosview window.

xosview*font: font
This is the font that xosview will use.

xosview*background: color
This is the color that will be used for the background.

xosview*foreground: color
This is the color that will be used for the foreground.

xosview*enableStipple: (True or False)
Change to true to try stipple support. This is primarily for users stuck with 1-bit
monitors/display cards. Try setting enableStipple true. Please give us feedback on this, if you
use it. It needs some more work, but no one has given us any feedback so far.

xosview*graphNumCols: number
This defines the number of sample bars drawn when a meter is in scrolling graph mode. This also
has the side-effect of defining the width of the graph columns. This is only used by meters which
have graph mode enabled.

Load Meter Resources

xosview*load: (True or False)
If True then xosview will display a load meter.

xosview*loadProcColor: color
This is the color that the load meter will use to display the load average when it is below the
warning threshold.

xosview*loadWarnColor: color
This is the color that the load meter will use once the load average is above the warning but
below the critical load threshold.

xosview*loadCritColor: color
This is the color that the load meter will use once the load average is above critical load
threshold.

xosview*loadIdleColor: color
The load meter will use this color to display the idle field.

xosview*loadPriority: priority
This number (which must be an integer >= 1) sets the number of tenths of a second that the load
meter waits between updates. A value of 1 has xosview update the meter 10 times per second (the
fastest). A value of 600 would cause xosview to update the meter once a minute.

xosview*loadWarnThreshold: int
This number (which must be an integer >= 1) sets the value at which the loadmeter changes its
status and color from "normal" to "warning". The default value is the number of processors.

xosview*loadCritThreshold: int
This number (which must be an integer >= 1) sets the value at which the loadmeter changes its
status and color from "warning" to "critical". The default value is four times the warning
threshold.

xosview*loadDecay: (True or False)
You should probably leave this at the default value (False). The load is already a time-averaged
value!

xosview*loadGraph: (True or False)
If this is set to True then the load meter will be drawn as a horizontally scrolling bargraph
showing the state value verses time.

xosview*loadUsedFormat: (float, percent or autoscale)
This resource tells xosview how to display "used" labels. The formats work as follows:

float:
Display the value as a floating point number.
percent:
Display the value as a percentage of the total.
autoscale:
Display the absolute value and automatically print the units (K, M, or G) as appropriate.

xosview*loadCpuSpeed: (True or False)
Display the current CPU speed in the load meter.

CPU Meter Resources

xosview*cpu: (True or False)
If True then xosview will display a cpu meter. On Linux, *BSD, Solaris and IRIX SMP machines, the
resource cpuFormat defines how meters are created for multiple CPUs.

xosview*cpuUserColor: color
The cpu meter will use this color to display the cpu user time field.

xosview*cpuNiceColor: color
The cpu meter will use this color to display the cpu nice time field.

xosview*cpuSystemColor: color
The cpu meter will use this color to display the cpu system time field.

xosview*cpuInterruptColor: color
The cpu meter will use this color to display the cpu hard interrupt time field.

xosview*cpuSInterruptColor: color
The cpu meter will use this color to display the cpu soft interrupt time field.

xosview*cpuWaitColor: color
The cpu meter will use this color to display the cpu IO waiting time field.

xosview*cpuGuestColor: color
The cpu meter will use this color to display the cpu virtualization guest time field.

xosview*cpuNiceGuestColor: color
The cpu meter will use this color to display the cpu niced virtualization guest time field.

xosview*cpuStolenColor: color
The cpu meter will use this color to display the cpu involuntary wait time field.

xosview*cpuFreeColor: color
The cpu meter will use this color to display the cpu idle time field.

xosview*cpuPriority: priority
This number (which must be an integer >= 1) sets the number of tenths of a second that the cpu
meter waits between updates. A value of 1 has xosview update the meter 10 times per second (the
fastest). A value of 600 would cause xosview to update the meter once a minute.

xosview*cpuDecay: (True or False)
If True then the cpu meter will be split vertically in two. The top half will show the
instantaneous state, while the bottom half will display a decaying average of the state.

xosview*cpuGraph: (True or False)
If this is set to True then the cpu meter will be drawn as a horizontally scrolling bargraph
showing the state value verses time.

xosview*cpuUsedFormat: (float, percent or autoscale)
This resource tells xosview how to display "used" labels. The formats work as follows:

xosview*cpuFormat: (single, all, both or auto)
If `single', only a cumulative meter for all CPU usage is created. `all' creates a meter for each
CPU, but no cumulative meter. `both' creates one cumulative meter and one for each CPU. `auto'
makes a choice based on the number of CPUs found.

xosview*cpuFields: USED/USR/NIC/SYS/INT/SI/HI/WIO/GST/NGS/STL/IDLE
The set of fields to show in Linux CPU meter instead of the default. Possible fields are:

USED:
Combine all used CPU time into one field. This is the sum of user, nice, system, soft and
hard interrupts, guest, niced guest and stolen times. None of these, except stolen, may be
defined together with `USED'.
IDLE:
Time spent doing nothing. Includes I/O wait if it is not defined separately.
USR:
Time spent in user mode processes. Includes nice, guest and niced guest if those are not
defined separately.
NIC:
Time spent in niced user mode processes. Includes niced guest if neither it nor guest is
not defined separately.
SYS:
Time spent in kernel code. Includes soft and hard interrupt as well as stolen time if those
are not defined separately.
INT:
Combines soft and hard interrupt handling times into one field.
SI:
Time the kernel used to handle soft interrupts. Available on Linux kernel 2.6.0 and higher.
HI:
Time the kernel used to handle hard interrupts. Available on Linux kernel 2.6.0 and higher.
WIO:
Time spent waiting for I/O to complete. Available on Linux kernel 2.6.0 and higher.
GST:
Time spent running guest OS in virtual machine. Includes niced guest if it is not defined
separately. Available on Linux kernel 2.6.24 and higher.
NGS:
Time spent running niced guest OS in virtual machine. Available on Linux kernel 2.6.32 and
higher.
STL:
Involuntary wait time when running as guest in virtual machine. Available on Linux kernel
2.6.11 and higher.

Most combinations are possible (see above for restrictions), but at least `USED' or `USR' and
`SYS' need to be defined. `IDLE' field is added automatically.

Memory Meter Resources

xosview*mem: (True or False)
If True then xosview will display a mem meter.

xosview*memUsedColor: color
The mem meter will use this color to display the used memory field.

xosview*memSharedColor: color
The mem meter will use this color to display the shared memory field.

xosview*memBufferColor: color
The mem meter will use this color to display the buffer memory field.

xosview*memCacheColor: color
The mem meter will use this color to display the cache memory field.

xosview*memFreeColor: color
The mem meter will use this color to display the free memory field.

xosview*memKernelColor: color
The mem meter will use this color to display the kernel memory field.

xosview*memSharedColor: color
The mem meter will use this color to display the shared memory field.

xosview*memTextColor: color
The mem meter will use this color to display the HP text memory field.

xosview*memOtherColor: color
The mem meter will use this color to display the HP ``other'' memory field.

xosview*memActiveColor: color
The mem meter will use this color to display the *BSD active memory field.

xosview*memInactiveColor: color
The mem meter will use this color to display the *BSD inactive memory field.

xosview*memWiredColor: color
The mem meter will use this color to display the *BSD wired memory field.

xosview*memSlabColor: color
The mem meter will use this color to display the Linux in-kernel data structures field.

xosview*memMapColor: color
The mem meter will use this color to display the Linux memory mapped files field.

xosview*memPriority: priority
This number (which must be an integer >= 1) sets the number of tenths of a second that the mem
meter waits between updates. A value of 1 has xosview update the meter 10 times per second (the
fastest). A value of 600 would cause xosview to update the meter once a minute.

xosview*memDecay: (True or False)
If True then the mem meter will be split vertically in two. The top half will show the
instantaneous state, while the bottom half will display a decaying average of the state.

xosview*memGraph: (True or False)
If this is set to True then the mem meter will be drawn as a horizontally scrolling bargraph
showing the state value verses time.

xosview*memUsedFormat: (float, percent or autoscale)
This resource tells xosview how to display "used" labels. The formats work as follows:

Swap Meter Resources

xosview*swap: (True or False)
If True then xosview will display a swap meter.

xosview*swapUsedColor: color
The swap meter will use this color to display the used swap field.

xosview*swapFreeColor: color
The swap meter will use this color to display the free swap field.

xosview*swapPriority: priority
This number (which must be an integer >= 1) sets the number of tenths of a second that the swap
meter waits between updates. A value of 1 has xosview update the meter 10 times per second (the
fastest). A value of 600 would cause xosview to update the meter once a minute.

xosview*swapDecay: (True or False)
If True then the swap meter will be split vertically in two. The top half will show the
instantaneous state, while the bottom half will display a decaying average of the state.

xosview*swapGraph: (True or False)
If this is set to True then the swap meter will be drawn as a horizontally scrolling bargraph
showing the state value verses time.

xosview*swapUsedFormat: (float, percent or autoscale)
This resource tells xosview how to display "used" labels. The formats work as follows:

Page Swapping Meter Resources

xosview*page: (True or False)
If True then xosview will display a page meter.

xosview*pageBandWidth: maxEvents
This number is used to specify the expected maximum bandwidth (in events / sec) for the page
meter. When the expected maximum bandwidth (maxEvents) is exceeded then the page meter will
display the relative percentage of page swapping (25% in, 75% out).

xosview*pageInColor: color
The page meter will use this color to display the page-in field.

xosview*pageOutColor: color
The page meter will use this color to display the page-out field.

xosview*pageIdleColor: color
The page meter will use this color to display the idle field.

xosview*pagePriority: priority
This number (which must be an integer >= 1) sets the number of tenths of a second that the page
meter waits between updates. A value of 1 has xosview update the meter 10 times per second (the
fastest). A value of 600 would cause xosview to update the meter once a minute.

xosview*pageDecay: (True or False)
If True then the page meter will be split vertically in two. The top half will show the
instantaneous state, while the bottom half will display a decaying average of the state.

xosview*pageGraph: (True or False)
If this is set to True then the page meter will be drawn as a horizontally scrolling bargraph
showing the state value verses time.

xosview*pageUsedFormat: (float, percent or autoscale)
This resource tells xosview how to display "used" labels. The formats work as follows:

Gfx Meter Resources

xosview*gfx: (True or False)
If True xosview will display the GfxMeter. The value is sampled once per second, due to the usage
of sadc to sample data.

xosview*gfxWarnColor: color
This is the color that the gfx meter will use once the warn state is reached.

xosview*gfxAlarmColor: color
This is the color that the gfx meter will use once the alarm state is reached.

xosview*gfxSwapColor: color
This is the color that the gfx meter will use in normal state

xosview*gfxIdleColor: color
The gfx meter will use this color to display the idle field.

xosview*gfxPriority: priority
This number (which must be an integer >= 1) sets the number of tenths of a second that the gfx
meter waits between updates. A value of 1 has xosview update the meter 10 times per second (the
fastest). A value of 600 would cause xosview to update the meter once a minute.

xosview*gfxWarnThreshold: int
This number (which must be an integer >= 1) of swapbuffers per second and pipe at which the
gfxmeter changes its status and color from "normal" to "warn". The default value is 60.

xosview*gfxAlarmThreshold: int
This number (which must be an integer >= gfxWarnThreshold) of swapbuffers per second and pipe at
which the gfxmeter changes its status and color from "warn" to "alarm". The default value is 120.

xosview*gfxDecay: (True or False)
You should probably leave this at the default value (False). The gfx does not work in decay mode.

xosview*gfxGraph: (True or False)
If this is set to True then the gfx meter will be drawn as a horizontally scrolling bargraph
showing the state value verses time.

xosview*gfxUsedFormat: (float, percent or autoscale)
This resource tells xosview how to display "used" labels. The formats work as follows:

Network Meter Resources

xosview*net: (True or False)
If True xosview will display the NetMeter. Linux users will have to configure their kernels and
setup some ip accounting rules to make this work. See the file README.linux which comes with the
xosview distribution for details.

xosview*netBandwidth: maxBytes
This number is used to specify the expected maximum bandwidth (in bytes / sec) for the meter.
When the expected maximum bandwidth (maxBytes) is exceeded then the network meter will display the
relative percentage of network usage (25% incoming, 75% outgoing).

xosview*netIface: interface
If False, xosview will display the data received/transmitted by any of the network interfaces.
Otherwise, xosview will only display the data received/transmitted by the specified network
interface. If the name is prepended with '-' sign, the data in that interface is ignored.

xosview*netInColor: color
The net meter will use this color to display the incoming field.

xosview*netOutColor: color
The net meter will use this color to display the outgoing field.

xosview*netBackground: color
This is the color that the network meter will use for the "idle" field.

xosview*netPriority: priority
This number (which must be an integer >= 1) sets the number of tenths of a second that the net
meter waits between updates. A value of 1 has xosview update the meter 10 times per second (the
fastest). A value of 600 would cause xosview to update the meter once a minute.

xosview*netDecay: (True or False)
If True then the net meter will be split vertically in two. The top half will show the
instantaneous state, while the bottom half will display a decaying average of the state.

xosview*netGraph: (True or False)
If this is set to True then the net meter will be drawn as a horizontally scrolling bargraph
showing the state value verses time.

xosview*netUsedFormat: (float, percent or autoscale)
This resource tells xosview how to display "used" labels. The formats work as follows:

NFSStats (Client) Resources

xosview*NFSStats: (True or False)
If True then xosview will display a meter to monitor NFS client stats.

xosview*NFSStatReTransColor: color
The color to be used for retransmit stats.

xosview*NFSStatAuthRefrshColor: color
The color to be used for auth refresh stats.

xosview*NFSStatCallsColor: color
The color to be used for call stats.

xosview*NFSStatIdleColor: color
The color to be used for idle stats.

NFSDStats (Server) Resources

xosview*NFSDStats: (True or False)
If True xosview will display a meter for NFS server/daemon stats.

xosview*NFSDStatCallsColor: color
The color to be used for call stats.

xosview*NFSDStatBadCallsColor: color
The color to be used for bad stats.

xosview*NFSDStatUDPColor: color
The color to be used for UDP stats.

xosview*NFSDStatTCPColor: color
The color to be used for TCP stats.

xosview*NFSDStatIdleColor: color
The color to be used for idle stats.

Serial Meter Resources

xosview*serial(0-9): (True, False, or portBase)
If True then xosview will display a serial meter for ttySx. The portbase will be autodetected.
Because autodetection can fail, (if the port is locked by ppp/slip for example) you can specify
the portbase instead of "True". If a portBase is used then xosview will use it instead of trying
to autodetect.

For this to work on Linux xosview needs to be suid root in order to have access to the ports. See
the file README.linux which comes with the xosview distribution for more details.

xosview*serialOnColor: color
This is the color the serial meter will use for bits that are set.

xosview*serialOffColor: color
This is the color the serial meter will use for bits that are not set.

xosview*serialPriority: priority
This number (which must be an integer >= 1) sets the number of tenths of a second that the serial
meter waits between updates. A value of 1 has xosview update the meter 10 times per second (the
fastest). A value of 600 would cause xosview to update the meter once a minute.

Interrupt Meter Resources

xosview*interrupts: (True or False)
If True then xosview will display an interrupt meter.

xosview*intSeparate: (True of False)
If True then xosview will display one interrupt meter per CPU on SMP machines. If False only one
meter is displayed. Default: True.

xosview*intOnColor: color
This is the color that will be used to show "active" interrupts.

xosview*intOffColor: color
This is the color that will be used to show "inactive" interrupts.

xosview*intPriority: priority
This number (which must be an integer >= 1) sets the number of tenths of a second that the int
meter waits between updates. A value of 1 has xosview update the meter 10 times per second (the
fastest). A value of 600 would cause xosview to update the meter once a minute.

Interrupt Rate Meter Resources

xosview*irqrate: (True or False)
If True then xosview will display an interrupt rate meter.

xosview*irqrateUsedColor: color
This is the color that will be used to show the interrupt rate.

xosview*irqrateIdleColor: color
The irqrate meter will use this color to display the idle field.

xosview*irqratePriority: priority
This number (which must be an integer >= 1) sets the number of tenths of a second that the irqrate
meter waits between updates. A value of 1 has xosview update the meter 10 times per second (the
fastest). A value of 600 would cause xosview to update the meter once a minute.

xosview*irqrateDecay: (True or False)
If True then the irqrate meter will be split vertically in two. The top half will show the
instantaneous state, while the bottom half will display a decaying average of the state.

xosview*irqrateGraph: (True or False)
If this is set to True then the irqrate meter will be drawn as a horizontally scrolling bargraph
showing the state value verses time.

xosview*irqrateUsedFormat: (float, percent or autoscale)
This resource tells xosview how to display "used" labels. The formats work as follows:

Lm Sensors Resources

xosview*lmstemp: (True or False)
If True then xosview will display a lmstemp meter.

xosview*lmstempHighest: number
Highest value displayed. If not given, or too small, the meter will adjust to fit actual and alarm
values. Can be overridden for any meter with lmstempHighestN.

xosview*lmstempActColor: color
Color of actual value.

xosview*lmstempHighColor: color
Color above high alarm value, also used to indicate alarm.

xosview*lmstempLowColor: color
Color of actual value, when it is below low alarm value.

xosview*lmstempIdleColor: color
Color between actual and high alarm values.

xosview*lmstempN: filename
Name of input file from /proc/sys/dev/sensors/*/* or /sys/class/hwmon/*/{,device}/, N=1,2,3,...
Can also be absolute path. For example,
xosview*lmstemp1: temp1
xosview*lmstemp2: temp2_input

Note: Many sensors have the value and alarm threshold in files named "*_input" and
"*_max"/"*_min", respectively. In such case, specifying the base name such as "temp1" here will be
enough for having both files used.

Note: If the same file name as lmstempN, lmshighN or lmslowN exists in other sensor directories,
then lmsnameN needs to be specified, or absolute path used, to find the correct one.

xosview*lmshighN: filename or number
Optional high alarm value or name of file from /sys/class/hwmon/*/{,device}/, N=1,2,3,... Can also
be absolute path. If not given, lmstempHighest is used as both maximum and high alarm. For
example,
xosview*lmshigh1: 70
xosview*lmshigh2: temp1_crit_hyst

xosview*lmslowN: filename or number
Optional low alarm value or name of file from /sys/class/hwmon/*/{,device}/, N=1,2,3,... Can also
be absolute path. Default is 0. For example,
xosview*lmslow1: 1.5
xosview*lmslow2: fan1_min

xosview*lmsnameN: name
Optional name of the sensor device to use when finding the filename(s) given in lmstempN, lmshighN
and lmslowN. See /sys/class/hwmon/*/{,device}/name for the names of your sensors. This has no
effect to files given as absolute paths. For example,
xosview*lmsname1: nct6779
xosview*lmsname2: radeon

xosview*lmstempLabelN: string
N-th label for above values, default is TMP.

xosview*lmstempHighestN: number
Override default lmstempHighest for meter N.

xosview*lmstempUsedFormatN: (float, percent or autoscale)
Override default lmstempUsedFormat for meter N.

xosview*lmstempPriority: priority
This number (which must be an integer >= 1) sets the number of tenths of a second that the lmstemp
meter waits between updates. A value of 1 has xosview update the meter 10 times per second (the
fastest). A value of 600 would cause xosview to update the meter once a minute.

xosview*lmstempUsedFormat: (float, percent or autoscale)
This resource tells xosview how to display "used" labels. The formats work as follows:

ACPI Temperature Resources

xosview*acpitemp: (True or False)
If True then xosview will display a acpitemp meter.

xosview*acpitempHighest: 100
Highest temp value displayed, default 100. If acpihighN is given, the value is read from there
instead.

xosview*acpitempActColor: color
Color of actual temperature.

xosview*acpitempHighColor: color
Color above alarm temperature, also used to indicate alarm.

xosview*acpitempIdleColor: color
Color between actual and alarm temperatures.

xosview*acpitempN: filename
Name of temperature file from /proc/acpi/thermal_zone or /sys/devices/virtual/thermal. Note that
the last directory part must be given, e.g. TZ0/temperature. Absolute path can also be used.

xosview*acpihighN: filename
Name of high value/trip point file from /proc/acpi/thermal_zone or /sys/devices/virtual/thermal,
or an absolute path to one.

xosview*acpitempLabelN: Labelstring
N-th label for above temperatures, default is TMP.

xosview*acpitempPriority: priority
This number (which must be an integer >= 1) sets the number of tenths of a second that the
acpitemp meter waits between updates. A value of 1 has xosview update the meter 10 times per
second (the fastest). A value of 600 would cause xosview to update the meter once a minute.

xosview*acpitempUsedFormat: (float, percent or autoscale)
This resource tells xosview how to display "used" labels. The formats work as follows:

Intel Core / AMD K8+ / VIA C7 Temperature Sensor Resources

xosview*coretemp: (True or False)
If True then xosview will display a coretemp meter.

xosview*coretempHighest: 100
Highest temp value displayed, default 100. If CPU throttling temperature (tjMax) is supplied by
the operating system, it is used instead.

xosview*coretempHigh: number
Value to use as alarm temperature, default is coretempHighest. If a usable value, such as the
temperature for which maximum cooling is required, is supplied by the operating system, it is used
instead.

xosview*coretempActColor: color
Color of actual temperature.

xosview*coretempHighColor: color
Color above alarm temperature, also used to indicate alarm.

xosview*coretempIdleColor: color
Color between actual and alarm temperatures.

xosview*coretempDisplayType: (separate, average or maximum)
This resource tells xosview how to display the CPU temperature. The formats work as follows:

separate:
Display one meter for each CPU core of a multi-core CPU. This is the default.
average:
Display the average of core temperatures of a multi-core CPU. On multi-socket machines, one
meter per physical CPU is displayed.
maximum:
Display the highest core temperature of a multi-core CPU. On multi-socket machines, one
meter per physical CPU is displayed.

xosview*coretempPriority: priority
This number (which must be an integer >= 1) sets the number of tenths of a second that the
coretemp meter waits between updates. A value of 1 has xosview update the meter 10 times per
second (the fastest). A value of 600 would cause xosview to update the meter once a minute.

xosview*coretempUsedFormat: (float, percent or autoscale)
This resource tells xosview how to display "used" labels. The formats work as follows:

*BSD Sensor Resources

xosview*bsdsensor: (True or False)
If True then xosview will display a bsdsensor meter.

xosview*bsdsensorHighest: number
Highest value displayed. If not given, or too small, the meter will adjust to fit actual and alarm
values. Can be overridden for any meter with bsdsensorHighestN.

xosview*bsdsensorActColor: color
Color of actual value.

xosview*bsdsensorHighColor: color
Color above high alarm value, also used to indicate alarm.

xosview*bsdsensorLowColor: color
Color of actual value, when it is below low alarm value.

xosview*bsdsensorIdleColor: color
Color between actual and high alarm values.

xosview*bsdsensorN: name.type
xosview*bsdsensorHighN: name.type
xosview*bsdsensorLowN: name.type
These define where the actual value, high alarm value and low alarm value for meter N=1,2,3,...
will be read from. The name is the sensor driver, and type is the wanted value. Both alarm values
are optional, and can also be given as static numerical values.

You can find the correct pair for OpenBSD and DragonFly BSD with systat command, e.g.
xosview*bsdsensor1: it0.temp1
xosview*bsdsensorHigh1: 100

On NetBSD, you can find the driver name with envstat command. Value name for the actual reading is
typically 'cur-value' and for high alarm 'critical-max' and for low alarm 'critical-min', e.g.
xosview*bsdsensor2: coretemp0.cur-value
xosview*bsdsensorHigh2: coretemp0.critical-max

For all possible NetBSD value names, refer to envstat source code.

FreeBSD has no usable sensor drivers as of version 9.0. However, ACPI thermal zones can be used by
defining the sysctl node below hw.acpi.thermal, e.g.
xosview*bsdsensor1: tz0.temperature
xosview*bsdsensorHigh1: tz0._CRT

ACPI thermal zones can be used like this on DragonFly BSD as well.

xosview*bsdsensorLabelN: string
N-th label for above meters, default is SENN.

xosview*bsdsensorHighestN: number
Override default bsdsensorHighest for meter N.

xosview*bsdsensorUsedFormatN: (float, percent or autoscale)
Override default bsdsensorUsedFormat for meter N.

xosview*bsdsensorPriority: priority
This number (which must be an integer >= 1) sets the number of tenths of a second that the
bsdsensor meter waits between updates. A value of 1 has xosview update the meter 10 times per
second (the fastest). A value of 600 would cause xosview to update the meter once a minute.

xosview*bsdsensorUsedFormat: (float, percent or autoscale)
This resource tells xosview how to display "used" labels. The formats work as follows:

Battery Meter Resources

xosview*battery: (True or False)
If True then xosview will display a battery meter. Linux users will need to have APM or ACPI
support in their kernels for this to work. For both APM and ACPI, xosview shows the status/sum of
all batteries. Additionally - the legend text gets changed/adjusted to reflect the current state
(charging/low/critical/etc.) of the battery/batteries.

xosview*batteryLeftColor: color
This is the color that will be used to show the amount of battery power left.

xosview*batteryUsedColor: color
This is the color that will be used to show the amount of battery power used.

xosview*batteryChargeColor: color
This is the color that will be used as 'left' - if the batteries get charged.

xosview*batteryFullColor: color
This is the color that will be used as 'left' - if the batteries are fully charged. APM and ACPI
does provide this info, but not all machines actually do so.

xosview*batteryLowColor: color
APM only - the 'left' color that will indicate a low battery. Depends on the machine - e.g. below
25% remaining capacity.

xosview*batteryCritColor: color
APM case: the 'left' color if APM indicates 'critical' state. (less than 5%) ACPI case: the 'left'
color if the remaining capacity is below the alarm value. (which can be set by the user in
/proc/acpi/battery/BAT[01]/alarm )

xosview*batteryNoneColor: color
If no battery is present - or all batteries get removed (while on AC).

xosview*batteryPriority: priority
This number (which must be an integer >= 1) sets the number of tenths of a second that the battery
meter waits between updates. A value of 1 has xosview update the meter 10 times per second (the
fastest). A value of 600 would cause xosview to update the meter once a minute.

xosview*batteryUsedFormat: (float, percent or autoscale)
This resource tells xosview how to display "used" labels. The formats work as follows:

Wireless Meter Resources

xosview*wireless: (True or False)
If True then xosview will display the link quality of each wireless connection. Note that the
graph will *never* show up, if you don't have any wireless devices, or no wireless extensions in
the kernel (/proc/net/wireless). Default is true.

xosview*PoorQualityColor: color
This is the color for the quality field when between 0 and 6.

xosview*FairQualityColor: color
This is the color for the quality field when between 7 and 14.

xosview*GoodQualityColor: color
This is the color for the quality field when higher than 14.

xosview*wirelessUsedColor: color
This is the background color.

xosview*wirelessPriority: priority
This number (which must be an integer >= 1) sets the number of tenths of a second that the
wireless meter waits between updates. A value of 1 has xosview update the meter 10 times per
second (the fastest). A value of 600 would cause xosview to update the meter once a minute.

xosview*wirelessDecay: (True or False)
If True then the wireless meter will be split vertically in two. The top half will show the
instantaneous state, while the bottom half will display a decaying average of the state.

xosview*wirelessUsedFormat: (float, percent or autoscale)
This resource tells xosview how to display "used" labels. The formats work as follows:

Disk Meter Resources

xosview*disk: (True or False)
If True then xosview will display a disk meter.

xosview*diskInColor: color
The disk meter will use this color to display the reads field.

xosview*diskOutColor: color
The disk meter will use this color to display the writes field.

xosview*diskIdleColor: color
The disk meter will use this color to display the idle field.

xosview*diskBandwidth: bandwidth
This number is used to specify the expected maximum bandwidth in bytes per second for the disk
meter.

xosview*diskWriteColor: color
This color will be used for the linux meter to show writes.

xosview*diskReadColor: color
This color will be used for the linux meter to show reads.

xosview*diskPriority: priority
This number (which must be an integer >= 1) sets the number of tenths of a second that the disk
meter waits between updates. A value of 1 has xosview update the meter 10 times per second (the
fastest). A value of 600 would cause xosview to update the meter once a minute.

xosview*diskDecay: (True or False)
If True then the disk meter will be split vertically in two. The top half will show the
instantaneous state, while the bottom half will display a decaying average of the state.

xosview*diskGraph: (True or False)
If this is set to True then the disk meter will be drawn as a horizontally scrolling bargraph
showing the state value verses time.

xosview*diskUsedFormat: (float, percent or autoscale)
This resource tells xosview how to display "used" labels. The formats work as follows:

RAID Meter Resources

xosview*RAID: (True or False)
If True then xosview will display a RAID meter.

xosview*RAIDdevicecount: int
Please enter your RAID device count (n) here or 0 if you don't have any supported RAID devices.
xosview then will display n RAID state displays.

xosview*RAIDdiskOnlineColor: color

xosview*RAIDdiskFailureColor: color
These colors will be used for indicating working/online or failed/offline disks. The order (from
left to right) is the same as in /proc/mdstat.

xosview*RAIDresyncdoneColor: color

xosview*RAIDresynctodoColor: color

xosview*RAIDresynccompleteColor: color
If a resync/rebuild of the RAID array is in progress, the "done" and "todo" colors will be used.
If no rebuild/resync is running, then the "complete" color will be shown.

xosview*RAIDPriority: priority
This number (which must be an integer >= 1) sets the number of tenths of a second that the RAID
meter waits between updates. A value of 1 has xosview update the meter 10 times per second (the
fastest). A value of 600 would cause xosview to update the meter once a minute.

xosview*RAIDUsedFormat: (float, percent or autoscale)
This resource tells xosview how to display "used" labels. The formats work as follows:

OBTAINING

       This version of xosview is distributed from the following site:

              http://www.pogo.org.uk/~mark/xosview/

AUTHORS

       Mike Romberg  <mike.romberg@noaa.gov>
              Original author, Linux and HPUX ports.

       Brian Grayson <bgrayson@netbsd.org>
              NetBSD port and most of the nice enhancements for version 1.4, initial work on FreeBSD port.

       Scott McNab <jedi@tartarus.uwa.edu.au>
              Added the scrolling graph mode.

       Tom Pavel <pavel@slac.stanford.edu>
              Most of the FreeBSD support, more resource-handling improvements.

       Greg Onufer <exodus@cheers.bungi.com>
              SunOS port.

       Stefan Eilemann <eilemann@gmail.com>
              IRIX 6.5 port.

       Sheldon Hearn <axl@iafrica.com>
              FreeBSD libdevstat-based diskmeter support.

       David W. Talmage <talmage@jefferson.cmf.nrl.navy.mil>
              Added battery-meter support to NetBSD.

       Oleg Safiullin <form@openbsd.org>
              OpenBSD interrupt-meter support.

       Werner Fink <werner@suse.de>
              Originator of the loadmeter.

       Massimiliano Ghilardi <ghilardi@cibs.sns.it>
              Linux pagemeter.

       Carsten Schabacker <cschaba@spock.central.de>
              Made extensions to the serial-meter.

       Paal Beyer <pbeyer@online.no>
              Ported the linux memstat kernel module to linux-2.1

       Jerome Forissier <forissier@isia.cma.fr>
              Author of the Linux SMP kernel patch which xosview uses to display meters for each CPU.

       Tomer Klainer <mandor@cs.huji.ac.il>
              Initial port to BSDI.

       Arno Augustin <Arno.Augustin@3SOFT.de>
              Solaris disk and network meters.

       Alberto BARSELLA <ishark@lsh01.univ-lille1.fr>
              Fixes for linux diskmeter + ip_chains support

       Thomas Waldmann <ThomasWaldmann@gmx.de>
              Linux raid meter, bitfieldmeter.  Many cosmetic fixes.

       Leopold Toetsch <lt@toetsch.at>
              Linux lms temp meter.

       David O'Brien <obrien@nuxi.com>
              FreeBSD 4.* updates, and a few other suggestions.

       Christos Zoulas <christos@netbsd.org>
              C++ standard compliance and other NetBSD fixes.

       Tim Ehlers <tehlers@gwdg.de>
              Wireless Link-Meter for Linux.

       Mark Hills <mark@pogo.org.uk>
              Bug fixes and general caretaking.

       Tomi Tapper <tomi.o.tapper@student.jyu.fi>
              Temperature sensor, and FreeBSD updates.

       Raymond S Brand (rsbx@acm.org)
              Misc fixes.

       And many others who have sent in small fixes and improvements.