Ubuntu Manpage: IO::Compress::Zip - Write zip files/buffers

Provided by: perl-doc_5.30.0-9ubuntu0.5_all

NAME

       IO::Compress::Zip - Write zip files/buffers

SYNOPSIS

           use IO::Compress::Zip qw(zip $ZipError) ;

           my $status = zip $input => $output [,OPTS]
               or die "zip failed: $ZipError\n";

           my $z = new IO::Compress::Zip $output [,OPTS]
               or die "zip failed: $ZipError\n";

           $z->print($string);
           $z->printf($format, $string);
           $z->write($string);
           $z->syswrite($string [, $length, $offset]);
           $z->flush();
           $z->tell();
           $z->eof();
           $z->seek($position, $whence);
           $z->binmode();
           $z->fileno();
           $z->opened();
           $z->autoflush();
           $z->input_line_number();
           $z->newStream( [OPTS] );

           $z->deflateParams();

           $z->close() ;

           $ZipError ;

           # IO::File mode

           print $z $string;
           printf $z $format, $string;
           tell $z
           eof $z
           seek $z, $position, $whence
           binmode $z
           fileno $z
           close $z ;

DESCRIPTION

       This module provides a Perl interface that allows writing zip compressed data to files or buffer.

       The primary purpose of this module is to provide streaming write access to zip files and buffers. It is
       not a general-purpose file archiver. If that is what you want, check out "Archive::Zip" or
       "Archive::Zip::SimpleZip".

       At present three compression methods are supported by IO::Compress::Zip, namely Store (no compression at
       all), Deflate, Bzip2 and LZMA.

       Note that to create Bzip2 content, the module "IO::Compress::Bzip2" must be installed.

       Note that to create LZMA content, the module "IO::Compress::Lzma" must be installed.

       For reading zip files/buffers, see the companion module IO::Uncompress::Unzip.

Functional Interface

A top-level function, "zip", is provided to carry out "one-shot" compression between buffers and/or
files. For finer control over the compression process, see the "OO Interface" section.

use IO::Compress::Zip qw(zip $ZipError) ;

zip $input_filename_or_reference => $output_filename_or_reference [,OPTS]
or die "zip failed: $ZipError\n";

The functional interface needs Perl5.005 or better.

zip $input_filename_or_reference => $output_filename_or_reference [, OPTS]
"zip" expects at least two parameters, $input_filename_or_reference and $output_filename_or_reference.

The $input_filename_or_reference parameter

The parameter, $input_filename_or_reference, is used to define the source of the uncompressed data.

It can take one of the following forms:

A filename
If the <$input_filename_or_reference> parameter is a simple scalar, it is assumed to be a filename.
This file will be opened for reading and the input data will be read from it.

A filehandle
If the $input_filename_or_reference parameter is a filehandle, the input data will be read from it.
The string '-' can be used as an alias for standard input.

A scalar reference
If $input_filename_or_reference is a scalar reference, the input data will be read from
$$input_filename_or_reference.

An array reference
If $input_filename_or_reference is an array reference, each element in the array must be a filename.

The input data will be read from each file in turn.

The complete array will be walked to ensure that it only contains valid filenames before any data is
compressed.

An Input FileGlob string
If $input_filename_or_reference is a string that is delimited by the characters "<" and ">" "zip"
will assume that it is an input fileglob string. The input is the list of files that match the
fileglob.

See File::GlobMapper for more details.

If the $input_filename_or_reference parameter is any other type, "undef" will be returned.

In addition, if $input_filename_or_reference is a simple filename, the default values for the "Name",
"Time", "TextFlag", "ExtAttr", "exUnixN" and "exTime" options will be sourced from that file.

If you do not want to use these defaults they can be overridden by explicitly setting the "Name", "Time",
"TextFlag", "ExtAttr", "exUnixN" and "exTime" options or by setting the "Minimal" parameter.

The $output_filename_or_reference parameter

The parameter $output_filename_or_reference is used to control the destination of the compressed data.
This parameter can take one of these forms.

A filename
If the $output_filename_or_reference parameter is a simple scalar, it is assumed to be a filename.
This file will be opened for writing and the compressed data will be written to it.

A filehandle
If the $output_filename_or_reference parameter is a filehandle, the compressed data will be written
to it. The string '-' can be used as an alias for standard output.

A scalar reference
If $output_filename_or_reference is a scalar reference, the compressed data will be stored in
$$output_filename_or_reference.

An Array Reference
If $output_filename_or_reference is an array reference, the compressed data will be pushed onto the
array.

An Output FileGlob
If $output_filename_or_reference is a string that is delimited by the characters "<" and ">" "zip"
will assume that it is an output fileglob string. The output is the list of files that match the
fileglob.

When $output_filename_or_reference is an fileglob string, $input_filename_or_reference must also be
a fileglob string. Anything else is an error.

See File::GlobMapper for more details.

If the $output_filename_or_reference parameter is any other type, "undef" will be returned.

Notes
When $input_filename_or_reference maps to multiple files/buffers and $output_filename_or_reference is a
single file/buffer the input files/buffers will each be stored in $output_filename_or_reference as a
distinct entry.

Optional Parameters
Unless specified below, the optional parameters for "zip", "OPTS", are the same as those used with the OO
interface defined in the "Constructor Options" section below.

"AutoClose => 0|1"
This option applies to any input or output data streams to "zip" that are filehandles.

If "AutoClose" is specified, and the value is true, it will result in all input and/or output
filehandles being closed once "zip" has completed.

This parameter defaults to 0.

"BinModeIn => 0|1"
This option is now a no-op. All files will be read in binmode.

"Append => 0|1"
The behaviour of this option is dependent on the type of output data stream.

• A Buffer

If "Append" is enabled, all compressed data will be append to the end of the output buffer.
Otherwise the output buffer will be cleared before any compressed data is written to it.

• A Filename

If "Append" is enabled, the file will be opened in append mode. Otherwise the contents of the
file, if any, will be truncated before any compressed data is written to it.

• A Filehandle

If "Append" is enabled, the filehandle will be positioned to the end of the file via a call to
"seek" before any compressed data is written to it. Otherwise the file pointer will not be
moved.

When "Append" is specified, and set to true, it will append all compressed data to the output data
stream.

So when the output is a filehandle it will carry out a seek to the eof before writing any compressed
data. If the output is a filename, it will be opened for appending. If the output is a buffer, all
compressed data will be appended to the existing buffer.

Conversely when "Append" is not specified, or it is present and is set to false, it will operate as
follows.

When the output is a filename, it will truncate the contents of the file before writing any
compressed data. If the output is a filehandle its position will not be changed. If the output is a
buffer, it will be wiped before any compressed data is output.

Defaults to 0.

Examples
To read the contents of the file "file1.txt" and write the compressed data to the file "file1.txt.zip".

use strict ;
use warnings ;
use IO::Compress::Zip qw(zip $ZipError) ;

my $input = "file1.txt";
zip $input => "$input.zip"
or die "zip failed: $ZipError\n";

To read from an existing Perl filehandle, $input, and write the compressed data to a buffer, $buffer.

use strict ;
use warnings ;
use IO::Compress::Zip qw(zip $ZipError) ;
use IO::File ;

my $input = new IO::File "<file1.txt"
or die "Cannot open 'file1.txt': $!\n" ;
my $buffer ;
zip $input => \$buffer
or die "zip failed: $ZipError\n";

To create a zip file, "output.zip", that contains the compressed contents of the files "alpha.txt" and
"beta.txt"

use strict ;
use warnings ;
use IO::Compress::Zip qw(zip $ZipError) ;

zip [ 'alpha.txt', 'beta.txt' ] => 'output.zip'
or die "zip failed: $ZipError\n";

Alternatively, rather than having to explicitly name each of the files that you want to compress, you
could use a fileglob to select all the "txt" files in the current directory, as follows

use strict ;
use warnings ;
use IO::Compress::Zip qw(zip $ZipError) ;

my @files = <*.txt>;
zip \@files => 'output.zip'
or die "zip failed: $ZipError\n";

or more succinctly

zip [ <*.txt> ] => 'output.zip'
or die "zip failed: $ZipError\n";

OO Interface

Constructor
The format of the constructor for "IO::Compress::Zip" is shown below

my $z = new IO::Compress::Zip $output [,OPTS]
or die "IO::Compress::Zip failed: $ZipError\n";

It returns an "IO::Compress::Zip" object on success and undef on failure. The variable $ZipError will
contain an error message on failure.

If you are running Perl 5.005 or better the object, $z, returned from IO::Compress::Zip can be used
exactly like an IO::File filehandle. This means that all normal output file operations can be carried
out with $z. For example, to write to a compressed file/buffer you can use either of these forms

$z->print("hello world\n");
print $z "hello world\n";

The mandatory parameter $output is used to control the destination of the compressed data. This parameter
can take one of these forms.

A filename
If the $output parameter is a simple scalar, it is assumed to be a filename. This file will be
opened for writing and the compressed data will be written to it.

A filehandle
If the $output parameter is a filehandle, the compressed data will be written to it. The string '-'
can be used as an alias for standard output.

A scalar reference
If $output is a scalar reference, the compressed data will be stored in $$output.

If the $output parameter is any other type, "IO::Compress::Zip"::new will return undef.

Constructor Options
"OPTS" is any combination of the following options:

"AutoClose => 0|1"
This option is only valid when the $output parameter is a filehandle. If specified, and the value is
true, it will result in the $output being closed once either the "close" method is called or the
"IO::Compress::Zip" object is destroyed.

This parameter defaults to 0.

"Append => 0|1"
Opens $output in append mode.

The behaviour of this option is dependent on the type of $output.

• A Buffer

If $output is a buffer and "Append" is enabled, all compressed data will be append to the end
of $output. Otherwise $output will be cleared before any data is written to it.

• A Filename

If $output is a filename and "Append" is enabled, the file will be opened in append mode.
Otherwise the contents of the file, if any, will be truncated before any compressed data is
written to it.

• A Filehandle

If $output is a filehandle, the file pointer will be positioned to the end of the file via a
call to "seek" before any compressed data is written to it. Otherwise the file pointer will
not be moved.

This parameter defaults to 0.

"Name => $string"
Stores the contents of $string in the zip filename header field.

If "Name" is not specified and the $input parameter is a filename, the value of $input will be used
for the zip filename header field.

If "Name" is not specified and the $input parameter is not a filename, no zip filename field will be
created.

Note that both the "CanonicalName" and "FilterName" options can modify the value used for the zip
filename header field.

"CanonicalName => 0|1"
This option controls whether the filename field in the zip header is normalized into Unix format
before being written to the zip file.

It is recommended that you enable this option unless you really need to create a non-standard Zip
file.

This is what APPNOTE.TXT has to say on what should be stored in the zip filename header field.

The name of the file, with optional relative path.
The path stored should not contain a drive or
device letter, or a leading slash. All slashes
should be forward slashes '/' as opposed to
backwards slashes '\' for compatibility with Amiga
and UNIX file systems etc.

This option defaults to false.

"FilterName => sub { ... }"
This option allow the filename field in the zip header to be modified before it is written to the
zip file.

This option takes a parameter that must be a reference to a sub. On entry to the sub the $_
variable will contain the name to be filtered. If no filename is available $_ will contain an empty
string.

The value of $_ when the sub returns will be stored in the filename header field.

Note that if "CanonicalName" is enabled, a normalized filename will be passed to the sub.

If you use "FilterName" to modify the filename, it is your responsibility to keep the filename in
Unix format.

Although this option can be used with the OO interface, it is of most use with the one-shot
interface. For example, the code below shows how "FilterName" can be used to remove the path
component from a series of filenames before they are stored in $zipfile.

sub compressTxtFiles
{
my $zipfile = shift ;
my $dir = shift ;

zip [ <$dir/*.txt> ] => $zipfile,
FilterName => sub { s[^$dir/][] } ;
}

"Time => $number"
Sets the last modified time field in the zip header to $number.

This field defaults to the time the "IO::Compress::Zip" object was created if this option is not
specified and the $input parameter is not a filename.

"ExtAttr => $attr"
This option controls the "external file attributes" field in the central header of the zip file.
This is a 4 byte field.

If you are running a Unix derivative this value defaults to

0100644 << 16

This should allow read/write access to any files that are extracted from the zip file/buffer`.

For all other systems it defaults to 0.

"exTime => [$atime, $mtime, $ctime]"
This option expects an array reference with exactly three elements: $atime, "mtime" and $ctime.
These correspond to the last access time, last modification time and creation time respectively.

It uses these values to set the extended timestamp field (ID is "UT") in the local zip header using
the three values, $atime, $mtime, $ctime. In addition it sets the extended timestamp field in the
central zip header using $mtime.

If any of the three values is "undef" that time value will not be used. So, for example, to set
only the $mtime you would use this

exTime => [undef, $mtime, undef]

If the "Minimal" option is set to true, this option will be ignored.

By default no extended time field is created.

"exUnix2 => [$uid, $gid]"
This option expects an array reference with exactly two elements: $uid and $gid. These values
correspond to the numeric User ID (UID) and Group ID (GID) of the owner of the files respectively.

When the "exUnix2" option is present it will trigger the creation of a Unix2 extra field (ID is
"Ux") in the local zip header. This will be populated with $uid and $gid. An empty Unix2 extra field
will also be created in the central zip header.

Note - The UID & GID are stored as 16-bit integers in the "Ux" field. Use "exUnixN" if your UID or
GID are 32-bit.

If the "Minimal" option is set to true, this option will be ignored.

By default no Unix2 extra field is created.

"exUnixN => [$uid, $gid]"
This option expects an array reference with exactly two elements: $uid and $gid. These values
correspond to the numeric User ID (UID) and Group ID (GID) of the owner of the files respectively.

When the "exUnixN" option is present it will trigger the creation of a UnixN extra field (ID is
"ux") in both the local and central zip headers. This will be populated with $uid and $gid. The
UID & GID are stored as 32-bit integers.

If the "Minimal" option is set to true, this option will be ignored.

By default no UnixN extra field is created.

"Comment => $comment"
Stores the contents of $comment in the Central File Header of the zip file.

By default, no comment field is written to the zip file.

"ZipComment => $comment"
Stores the contents of $comment in the End of Central Directory record of the zip file.

By default, no comment field is written to the zip file.

"Method => $method"
Controls which compression method is used. At present four compression methods are supported, namely
Store (no compression at all), Deflate, Bzip2 and Lzma.

The symbols, ZIP_CM_STORE, ZIP_CM_DEFLATE, ZIP_CM_BZIP2 and ZIP_CM_LZMA are used to select the
compression method.

These constants are not imported by "IO::Compress::Zip" by default.

use IO::Compress::Zip qw(:zip_method);
use IO::Compress::Zip qw(:constants);
use IO::Compress::Zip qw(:all);

Note that to create Bzip2 content, the module "IO::Compress::Bzip2" must be installed. A fatal error
will be thrown if you attempt to create Bzip2 content when "IO::Compress::Bzip2" is not available.

Note that to create Lzma content, the module "IO::Compress::Lzma" must be installed. A fatal error
will be thrown if you attempt to create Lzma content when "IO::Compress::Lzma" is not available.

The default method is ZIP_CM_DEFLATE.

"Stream => 0|1"
This option controls whether the zip file/buffer output is created in streaming mode.

Note that when outputting to a file with streaming mode disabled ("Stream" is 0), the output file
must be seekable.

The default is 1.

"Zip64 => 0|1"
Create a Zip64 zip file/buffer. This option is used if you want to store files larger than 4 Gig or
store more than 64K files in a single zip archive.

"Zip64" will be automatically set, as needed, if working with the one-shot interface when the input
is either a filename or a scalar reference.

If you intend to manipulate the Zip64 zip files created with this module using an external
zip/unzip, make sure that it supports Zip64.

In particular, if you are using Info-Zip you need to have zip version 3.x or better to update a
Zip64 archive and unzip version 6.x to read a zip64 archive.

The default is 0.

"TextFlag => 0|1"
This parameter controls the setting of a bit in the zip central header. It is used to signal that
the data stored in the zip file/buffer is probably text.

In one-shot mode this flag will be set to true if the Perl "-T" operator thinks the file contains
text.

The default is 0.

"ExtraFieldLocal => $data"
"ExtraFieldCentral => $data"
The "ExtraFieldLocal" option is used to store additional metadata in the local header for the zip
file/buffer. The "ExtraFieldCentral" does the same for the matching central header.

An extra field consists of zero or more subfields. Each subfield consists of a two byte header
followed by the subfield data.

The list of subfields can be supplied in any of the following formats

ExtraFieldLocal => [$id1, $data1,
$id2, $data2,
...
]

ExtraFieldLocal => [ [$id1 => $data1],
[$id2 => $data2],
...
]

ExtraFieldLocal => { $id1 => $data1,
$id2 => $data2,
...
}

Where $id1, $id2 are two byte subfield ID's.

If you use the hash syntax, you have no control over the order in which the ExtraSubFields are
stored, plus you cannot have SubFields with duplicate ID.

Alternatively the list of subfields can by supplied as a scalar, thus

ExtraField => $rawdata

In this case "IO::Compress::Zip" will check that $rawdata consists of zero or more conformant sub-
fields.

The Extended Time field (ID "UT"), set using the "exTime" option, and the Unix2 extra field (ID
"Ux), set using the "exUnix2" option, are examples of extra fields.

If the "Minimal" option is set to true, this option will be ignored.

The maximum size of an extra field 65535 bytes.

"Minimal => 1|0"
If specified, this option will disable the creation of all extra fields in the zip local and central
headers. So the "exTime", "exUnix2", "exUnixN", "ExtraFieldLocal" and "ExtraFieldCentral" options
will be ignored.

This parameter defaults to 0.

"BlockSize100K => number"
Specify the number of 100K blocks bzip2 uses during compression.

Valid values are from 1 to 9, where 9 is best compression.

This option is only valid if the "Method" is ZIP_CM_BZIP2. It is ignored otherwise.

The default is 1.

"WorkFactor => number"
Specifies how much effort bzip2 should take before resorting to a slower fallback compression
algorithm.

Valid values range from 0 to 250, where 0 means use the default value 30.

This option is only valid if the "Method" is ZIP_CM_BZIP2. It is ignored otherwise.

The default is 0.

"Preset => number"
Used to choose the LZMA compression preset.

Valid values are 0-9 and "LZMA_PRESET_DEFAULT".

0 is the fastest compression with the lowest memory usage and the lowest compression.

9 is the slowest compression with the highest memory usage but with the best compression.

This option is only valid if the "Method" is ZIP_CM_LZMA. It is ignored otherwise.

Defaults to "LZMA_PRESET_DEFAULT" (6).

"Extreme => 0|1"
Makes LZMA compression a lot slower, but a small compression gain.

This option is only valid if the "Method" is ZIP_CM_LZMA. It is ignored otherwise.

Defaults to 0.

-Level
Defines the compression level used by zlib. The value should either be a number between 0 and 9 (0
means no compression and 9 is maximum compression), or one of the symbolic constants defined below.

Z_NO_COMPRESSION
Z_BEST_SPEED
Z_BEST_COMPRESSION
Z_DEFAULT_COMPRESSION

The default is Z_DEFAULT_COMPRESSION.

Note, these constants are not imported by "IO::Compress::Zip" by default.

use IO::Compress::Zip qw(:strategy);
use IO::Compress::Zip qw(:constants);
use IO::Compress::Zip qw(:all);

-Strategy
Defines the strategy used to tune the compression. Use one of the symbolic constants defined below.

Z_FILTERED
Z_HUFFMAN_ONLY
Z_RLE
Z_FIXED
Z_DEFAULT_STRATEGY

The default is Z_DEFAULT_STRATEGY.

"Strict => 0|1"
This is a placeholder option.

Examples
TODO

Methods

   print
       Usage is

           $z->print($data)
           print $z $data

       Compresses and outputs the contents of the $data parameter. This has the same behaviour  as  the  "print"
       built-in.

       Returns true if successful.

   printf
       Usage is

           $z->printf($format, $data)
           printf $z $format, $data

       Compresses and outputs the contents of the $data parameter.

       Returns true if successful.

   syswrite
       Usage is

           $z->syswrite $data
           $z->syswrite $data, $length
           $z->syswrite $data, $length, $offset

       Compresses and outputs the contents of the $data parameter.

       Returns the number of uncompressed bytes written, or "undef" if unsuccessful.

   write
       Usage is

           $z->write $data
           $z->write $data, $length
           $z->write $data, $length, $offset

       Compresses and outputs the contents of the $data parameter.

       Returns the number of uncompressed bytes written, or "undef" if unsuccessful.

   flush
       Usage is

           $z->flush;
           $z->flush($flush_type);

       Flushes any pending compressed data to the output file/buffer.

       This method takes an optional parameter, $flush_type, that controls how the flushing will be carried out.
       By  default  the  $flush_type  used  is  "Z_FINISH". Other valid values for $flush_type are "Z_NO_FLUSH",
       "Z_SYNC_FLUSH", "Z_FULL_FLUSH"  and  "Z_BLOCK".  It  is  strongly  recommended  that  you  only  set  the
       "flush_type"  parameter if you fully understand the implications of what it does - overuse of "flush" can
       seriously degrade the level of compression achieved. See the "zlib" documentation for details.

       Returns true on success.

   tell
       Usage is

           $z->tell()
           tell $z

       Returns the uncompressed file offset.

   eof
       Usage is

           $z->eof();
           eof($z);

       Returns true if the "close" method has been called.

   seek
           $z->seek($position, $whence);
           seek($z, $position, $whence);

       Provides a sub-set of the "seek" functionality, with the restriction  that  it  is  only  legal  to  seek
       forward in the output file/buffer.  It is a fatal error to attempt to seek backward.

       Empty parts of the file/buffer will have NULL (0x00) bytes written to them.

       The $whence parameter takes one the usual values, namely SEEK_SET, SEEK_CUR or SEEK_END.

       Returns 1 on success, 0 on failure.

   binmode
       Usage is

           $z->binmode
           binmode $z ;

       This is a noop provided for completeness.

   opened
           $z->opened()

       Returns true if the object currently refers to a opened file/buffer.

   autoflush
           my $prev = $z->autoflush()
           my $prev = $z->autoflush(EXPR)

       If  the  $z  object  is associated with a file or a filehandle, this method returns the current autoflush
       setting for the underlying filehandle. If "EXPR" is present, and is non-zero,  it  will  enable  flushing
       after every write/print operation.

       If $z is associated with a buffer, this method has no effect and always returns "undef".

       Note that the special variable $| cannot be used to set or retrieve the autoflush setting.

   input_line_number
           $z->input_line_number()
           $z->input_line_number(EXPR)

       This method always returns "undef" when compressing.

   fileno
           $z->fileno()
           fileno($z)

       If  the  $z  object  is  associated with a file or a filehandle, "fileno" will return the underlying file
       descriptor. Once the "close" method is called "fileno" will return "undef".

       If the $z object is associated with a buffer, this method will return "undef".

   close
           $z->close() ;
           close $z ;

       Flushes any pending compressed data and then closes the output file/buffer.

       For most versions of Perl this method will be automatically invoked if the  IO::Compress::Zip  object  is
       destroyed (either explicitly or by the variable with the reference to the object going out of scope). The
       exceptions  are Perl versions 5.005 through 5.00504 and 5.8.0. In these cases, the "close" method will be
       called automatically, but not  until  global  destruction  of  all  live  objects  when  the  program  is
       terminating.

       Therefore,  if  you  want your scripts to be able to run on all versions of Perl, you should call "close"
       explicitly and not rely on automatic closing.

       Returns true on success, otherwise 0.

       If the "AutoClose" option has been enabled when the IO::Compress::Zip object was created, and the  object
       is associated with a file, the underlying file will also be closed.

   newStream([OPTS])
       Usage is

           $z->newStream( [OPTS] )

       Closes the current compressed data stream and starts a new one.

       OPTS consists of any of the options that are available when creating the $z object.

       See the "Constructor Options" section for more details.

   deflateParams
       Usage is

           $z->deflateParams

       TODO

Importing

       A  number of symbolic constants are required by some methods in "IO::Compress::Zip". None are imported by
       default.

       :all Imports "zip", $ZipError and all symbolic constants that can be used by "IO::Compress::Zip". Same as
            doing this

                use IO::Compress::Zip qw(zip $ZipError :constants) ;

       :constants
            Import all symbolic constants. Same as doing this

                use IO::Compress::Zip qw(:flush :level :strategy :zip_method) ;

       :flush
            These symbolic constants are used by the "flush" method.

                Z_NO_FLUSH
                Z_PARTIAL_FLUSH
                Z_SYNC_FLUSH
                Z_FULL_FLUSH
                Z_FINISH
                Z_BLOCK

       :level
            These symbolic constants are used by the "Level" option in the constructor.

                Z_NO_COMPRESSION
                Z_BEST_SPEED
                Z_BEST_COMPRESSION
                Z_DEFAULT_COMPRESSION

       :strategy
            These symbolic constants are used by the "Strategy" option in the constructor.

                Z_FILTERED
                Z_HUFFMAN_ONLY
                Z_RLE
                Z_FIXED
                Z_DEFAULT_STRATEGY

       :zip_method
            These symbolic constants are used by the "Method" option in the constructor.

                ZIP_CM_STORE
                ZIP_CM_DEFLATE
                ZIP_CM_BZIP2

EXAMPLES

   Apache::GZip Revisited
       See IO::Compress::FAQ

   Working with Net::FTP
       See IO::Compress::FAQ

AUTHOR

       This module was written by Paul Marquess, "pmqs@cpan.org".

MODIFICATION HISTORY

       See the Changes file.

COPYRIGHT AND LICENSE

       Copyright (c) 2005-2019 Paul Marquess. All rights reserved.

       This  program  is  free  software;  you can redistribute it and/or modify it under the same terms as Perl
       itself.

perl v5.30.0                                       2023-11-23                           IO::Compress::Zip(3perl)

NAME

SYNOPSIS

DESCRIPTION

Functional Interface

OO Interface

Methods

Importing

EXAMPLES

SEE ALSO

AUTHOR

MODIFICATION HISTORY

COPYRIGHT AND LICENSE