Provided by: erlang-manpages_22.2.7+dfsg-1ubuntu0.5_all 
NAME
ct_netconfc - NETCONF client module.
DESCRIPTION
NETCONF client module compliant with RFC 6241, NETCONF Configuration Protocol, and RFC 6242, Using the
NETCONF Configuration Protocol over Secure SHell (SSH), and with support for RFC 5277, NETCONF Event
Notifications.
Connecting to a NETCONF server
Call connect/1,2 to establish a connection to a server, then pass the returned handle to session/1-3 to
establish a NETCONF session on a new SSH channel. Each call to session/1-3 establishes a new session on
the same connection, and results in a hello message to the server.
Alternately, open/1,2 can be used to establish a single session on a dedicated connection. (Or,
equivalently, only_open/1,2 followed by hello/1-3.)
Connect/session options can be specified in a configuration file with entries like the following.
{server_id(), [option()]}.
The server_id() or an associated ct:target_name() can then be passed to the aforementioned functions to
use the referenced configuration.
Signaling
Protocol operations in the NETCONF protocol are realized as remote procedure calls (RPCs) from client to
server and a corresponding reply from server to client. RPCs are sent using like-named functions (eg.
edit_config/3-5 to send an edit-config RPC), with the server reply as return value. There are functions
for each RPC defined in RFC 6241 and the create-subscription RPC from RFC 5277, all of which are wrappers
on send_rpc/2,3, that can be used to send an arbitrary RPC not defined in RFC 6241 or RFC 5277.
All of the signaling functions have one variant with a Timeout argument and one without, corresponding to
an infinite timeout. The latter is inappropriate in most cases since a non-response by the server or a
missing message-id causes the call to hang indefinitely.
Logging
The NETCONF server uses error_logger for logging of NETCONF traffic. A special purpose error handler is
implemented in ct_conn_log_h. To use this error handler, add the cth_conn_log hook in the test suite, for
example:
suite() ->
[{ct_hooks, [{cth_conn_log, [{ct:conn_log_mod(), ct:conn_log_options()}]}]}].
conn_log_mod() is the name of the Common Test module implementing the connection protocol, for example,
ct_netconfc.
Hook option log_type specifies the type of logging:
raw:
The sent and received NETCONF data is logged to a separate text file "as is" without any formatting.
A link to the file is added to the test case HTML log.
pretty:
The sent and received NETCONF data is logged to a separate text file with XML data nicely indented. A
link to the file is added to the test case HTML log.
html (default):
The sent and received NETCONF traffic is pretty printed directly in the test case HTML log.
silent:
NETCONF traffic is not logged.
By default, all NETCONF traffic is logged in one single log file. However, different connections can be
logged in separate files. To do this, use hook option hosts and list the names of the servers/connections
to be used in the suite. The connections must be named for this to work, that is, they must be opened
with open/2.
Option hosts has no effect if log_type is set to html or silent.
The hook options can also be specified in a configuration file with configuration variable ct_conn_log:
{ct_conn_log,[{ct:conn_log_mod(), ct:conn_log_options()}]}.
For example:
{ct_conn_log,[{ct_netconfc,[{log_type,pretty},
{hosts,[ct:key_or_name()]}]}]}
Note:
Hook options specified in a configuration file overwrite the hard-coded hook options in the test suite.
Logging Example 1:
The following ct_hooks statement causes pretty printing of NETCONF traffic to separate logs for the
connections named nc_server1 and nc_server2. Any other connections are logged to default NETCONF log.
suite() ->
[{ct_hooks, [{cth_conn_log, [{ct_netconfc,[{log_type,pretty}},
{hosts,[nc_server1,nc_server2]}]}
]}]}].
Connections must be opened as follows:
open(nc_server1,[...]),
open(nc_server2,[...]).
Logging Example 2:
The following configuration file causes raw logging of all NETCONF traffic in to one single text file:
{ct_conn_log,[{ct_netconfc,[{log_type,raw}]}]}.
The ct_hooks statement must look as follows:
suite() ->
[{ct_hooks, [{cth_conn_log, []}]}].
The same ct_hooks statement without the configuration file would cause HTML logging of all NETCONF
connections in to the test case HTML log.
DATA TYPES
client() = handle() | server_id() | ct:target_name()
Handle to a NETCONF session, as required by signaling functions.
handle()
Handle to a connection to a NETCONF server as returned by connect/1,2, or to a session as returned
by session/1-3, open/1,2, or only_open/1,2.
xs_datetime() = string()
Date and time of a startTime/stopTime element in an RFC 5277 create-subscription request. Of XML
primitive type dateTime, which has the (informal) form
[-]YYYY-MM-DDThh:mm:ss[.s][Z|(+|-)hh:mm]
where T and Z are literal and .s is one or more fractional seconds.
event_time() = {eventTime, xml_attributes(), [xs_datetime()]}
notification_content() = [event_time() | simple_xml()]
notification() =
{notification, xml_attributes(), notification_content()}
Event notification messages sent as a result of calls to create_subscription/2,3.
option() =
{host | ssh, host()} |
{port, inet:port_number()} |
{timeout, timeout()} |
{capability, string() | [string()]} |
ssh:client_option()
Options host and port specify the server endpoint to which to connect, and are passed directly to
ssh:connect/4, as are arbitrary ssh options. Common options are user, password and user_dir.
Option timeout specifies the number of milliseconds to allow for connection establishment and, if
the function in question results in an outgoing hello message, reception of the server hello. The
timeout applies to connection and hello independently; one timeout for connection establishment,
another for hello reception.
Option capability specifies the content of a corresponding element in an outgoing hello message,
each option specifying the content of a single element. If no base NETCONF capability is
configured then the RFC 4741 1.0 capability, "urn:ietf:params:netconf:base:1.0", is added,
otherwise not. In particular, the RFC 6241 1.1 capability must be explicitly configured. NETCONF
capabilities can be specified using the shorthand notation defined in RFC 6241, any capability
string starting with a colon being prefixed by either "urn:ietf:params:netconf" or
"urn:ietf:params:netconf:capability", as appropriate.
Capability options are ignored by connect/1-3 and only_open/1-2, which don't result in an outgoing
hello message.
server_id() = atom()
Identity of connection or session configuration in a configuration file.
stream_data() =
{description, string()} |
{replaySupport, string()} |
{replayLogCreationTime, string()} |
{replayLogAgedTime, string()}
stream_name() = string()
streams() = [{stream_name(), [stream_data()]}]
Stream information as returned by get_event_streams/1-3. See RFC 5277, "XML Schema for Event
Notifications", for detail on the format of the string values.
xml_attribute_tag() = atom()
xml_attribute_value() = string()
xml_attributes() =
[{xml_attribute_tag(), xml_attribute_value()}]
xml_content() = [simple_xml() | iolist()]
xml_tag() = atom()
simple_xml() =
{xml_tag(), xml_attributes(), xml_content()} |
{xml_tag(), xml_content()} |
xml_tag()
Representation of XML, as described in application xmerl.
xpath() = {xpath, string()}
error_reason() = term()
host() = inet:hostname() | inet:ip_address()
netconf_db() = running | startup | candidate
EXPORTS
action(Client, Action) -> Result
action(Client, Action, Timeout) -> Result
Types:
Client = client()
Action = simple_xml()
Timeout = timeout()
Result = ok | {ok, [simple_xml()]} | {error, error_reason()}
Executes an action. If the return type is void, ok is returned instead of {ok,[simple_xml()]}.
close_session(Client) -> Result
close_session(Client, Timeout) -> Result
Types:
Client = client()
Timeout = timeout()
Result = ok | {error, error_reason()}
Requests graceful termination of the session associated with the client.
When a NETCONF server receives a close-session request, it gracefully closes the session. The
server releases any locks and resources associated with the session and gracefully closes any
associated connections. Any NETCONF requests received after a close-session request are ignored.
connect(Options) -> Result
Types:
Options = [option()]
Result = {ok, handle()} | {error, error_reason()}
Opens an SSH connection to a NETCONF server.
If the server options are specified in a configuration file, use connect/2 instead.
The opaque handle() reference returned from this function is required as connection identifier
when opening sessions over this connection, see session/1-3.
connect(KeyOrName, ExtraOptions) -> Result
Types:
KeyOrName = ct:key_or_name()
ExtraOptions = [option()]
Result = {ok, handle()} | {error, error_reason()}
Open an SSH connection to a named NETCONF server.
If KeyOrName is a configured server_id() or a target_name() associated with such an Id, then the
options for this server are fetched from the configuration file.
The options list is added to those of the configuration file. If an option is specified in both
lists, the configuration file takes precedence.
If the server is not specified in a configuration file, use connect/1 instead.
The opaque handle() reference returned from this function can be used as connection identifier
when opening sessions over this connection, see session/1-3. However, if KeyOrName is a
target_name(), that is, if the server is named through a call to ct:require/2 or a require
statement in the test suite, then this name can be used instead of handle().
copy_config(Client, Target, Source) -> Result
copy_config(Client, Target, Source, Timeout) -> Result
Types:
Client = client()
Target = Source = netconf_db()
Timeout = timeout()
Result = ok | {error, error_reason()}
Copies configuration data.
Which source and target options that can be issued depends on the capabilities supported by the
server. That is, :candidate and/or :startup are required.
create_subscription(Client, Values) -> Result
create_subscription(Client, Values, Timeout) -> Result
Types:
Client = client()
Values =
#{stream => Stream,
filter => Filter,
start => StartTime,
stop => StopTime}
Stream = stream_name()
Filter = simple_xml() | [simple_xml()]
StartTime = StopTime = xs_datetime()
Timeout = timeout()
Result = ok | {error, error_reason()}
Creates a subscription for event notifications by sending an RFC 5277 create-subscription RPC to
the server. The calling process receives events as messages of type notification().
From RFC 5722, 2.1 Subscribing to Receive Event Notifications:
Stream:
Indicates which stream of event is of interest. If not present, events in the default NETCONF
stream are sent.
Filter:
Indicates which subset of all possible events is of interest. The parameter format is the same
as that of the filter parameter in the NETCONF protocol operations. If not present, all events
not precluded by other parameters are sent.
StartTime:
Used to trigger the replay feature and indicate that the replay is to start at the time
specified. If StartTime is not present, this is not a replay subscription. It is not valid to
specify start times that are later than the current time. If StartTime is specified earlier
than the log can support, the replay begins with the earliest available notification. This
parameter is of type dateTime and compliant to RFC 3339. Implementations must support time
zones.
StopTime:
Used with the optional replay feature to indicate the newest notifications of interest. If
StopTime is not present, the notifications continues until the subscription is terminated.
Must be used with and be later than StartTime. Values of StopTime in the future are valid.
This parameter is of type dateTime and compliant to RFC 3339. Implementations must support
time zones.
See RFC 5277 for more details. The requirement that StopTime must only be used with StartTime is
not enforced, to allow an invalid request to be sent to the server.
Prior to OTP 22.1, this function was documented as having 15 variants in 6 arities. These are
still exported for backwards compatibility, but no longer documented. The map-based variants
documented above provide the same functionality with simpler arguments.
delete_config(Client, Target) -> Result
delete_config(Client, Target, Timeout) -> Result
Types:
Client = client()
Target = startup | candidate
Timeout = timeout()
Result = ok | {error, error_reason()}
Deletes configuration data.
The running configuration cannot be deleted and :candidate or :startup must be advertised by the
server.
disconnect(Conn) -> ok | {error, error_reason()}
Types:
Conn = handle()
Closes the given SSH connection.
If there are open NETCONF sessions on the connection, these will be brutally aborted. To avoid
this, close each session with close_session/1,2
edit_config(Client, Target, Config) -> Result
edit_config(Client, Target, Config, OptParams) -> Result
edit_config(Client, Target, Config, Timeout) -> Result
edit_config(Client, Target, Config, OptParams, Timeout) -> Result
Types:
Client = client()
Target = netconf_db()
Config = simple_xml() | [simple_xml()]
OptParams = [simple_xml()]
Timeout = timeout()
Result = ok | {error, error_reason()}
Edits configuration data.
By default only the running target is available, unless the server includes :candidate or :startup
in its list of capabilities.
OptParams can be used for specifying optional parameters (default-operation, test-option, or
error-option) to be added to the edit-config request. The value must be a list containing valid
simple XML, for example:
[{'default-operation', ["none"]},
{'error-option', ["rollback-on-error"]}]
If OptParams is not given, the default value [] is used.
get(Client, Filter) -> Result
get(Client, Filter, Timeout) -> Result
Types:
Client = client()
Filter = simple_xml() | xpath()
Timeout = timeout()
Result = {ok, [simple_xml()]} | {error, error_reason()}
Gets data.
This operation returns both configuration and state data from the server.
Filter type xpath can be used only if the server supports :xpath.
get_capabilities(Client) -> Result
get_capabilities(Client, Timeout) -> Result
Types:
Client = client()
Timeout = timeout()
Result = [string()] | {error, error_reason()}
Returns the server capabilities as received in its hello message.
get_config(Client, Source, Filter) -> Result
get_config(Client, Source, Filter, Timeout) -> Result
Types:
Client = client()
Source = netconf_db()
Filter = simple_xml() | xpath()
Timeout = timeout()
Result = {ok, [simple_xml()]} | {error, error_reason()}
Gets configuration data.
To be able to access another source than running, the server must advertise :candidate and/or
:startup.
Filter type xpath can be used only if the server supports :xpath.
get_event_streams(Client) -> Result
get_event_streams(Client, Timeout) -> Result
get_event_streams(Client, Streams) -> Result
get_event_streams(Client, Streams, Timeout) -> Result
Types:
Client = client()
Streams = [stream_name()]
Timeout = timeout()
Result = {ok, streams()} | {error, error_reason()}
Sends a request to get the specified event streams.
Streams is a list of stream names. The following filter is sent to the NETCONF server in a get
request:
<netconf xmlns="urn:ietf:params:xml:ns:netmod:notification">
<streams>
<stream>
<name>StreamName1</name>
</stream>
<stream>
<name>StreamName2</name>
</stream>
...
</streams>
</netconf>
If Streams is an empty list, all streams are requested by sending the following filter:
<netconf xmlns="urn:ietf:params:xml:ns:netmod:notification">
<streams/>
</netconf>
If more complex filtering is needed, use ct_netconfc:get/2,3 and specify the exact filter
according to "XML Schema for Event Notifications" in RFC 5277.
get_session_id(Client) -> Result
get_session_id(Client, Timeout) -> Result
Types:
Client = client()
Timeout = timeout()
Result = integer() >= 1 | {error, error_reason()}
Returns the session Id associated with the specified client.
hello(Client) -> Result
hello(Client, Timeout) -> Result
hello(Client, Options, Timeout) -> Result
Types:
Client = handle()
Options = [{capability, [string()]}]
Timeout = timeout()
Result = ok | {error, error_reason()}
Exchanges hello messages with the server. Returns when the server hello has been received or after
the specified timeout.
Note that capabilities for an outgoing hello can be passed directly to open/2.
kill_session(Client, SessionId) -> Result
kill_session(Client, SessionId, Timeout) -> Result
Types:
Client = client()
SessionId = integer() >= 1
Timeout = timeout()
Result = ok | {error, error_reason()}
Forces termination of the session associated with the supplied session Id.
The server side must abort any ongoing operations, release any locks and resources associated with
the session, and close any associated connections.
Only if the server is in the confirmed commit phase, the configuration is restored to its state
before entering the confirmed commit phase. Otherwise, no configuration rollback is performed.
If the specified SessionId is equal to the current session Id, an error is returned.
lock(Client, Target) -> Result
lock(Client, Target, Timeout) -> Result
Types:
Client = client()
Target = netconf_db()
Timeout = timeout()
Result = ok | {error, error_reason()}
Locks the configuration target.
Which target parameters that can be used depends on if :candidate and/or :startup are supported by
the server. If successfull, the configuration system of the device is unavailable to other clients
(NETCONF, CORBA, SNMP, and so on). Locks are intended to be short-lived.
Operation kill_session/2,3 can be used to force the release of a lock owned by another NETCONF
session. How this is achieved by the server side is implementation-specific.
only_open(Options) -> Result
Types:
Options = [option()]
Result = {ok, handle()} | {error, error_reason()}
Opens a NETCONF session, but does not send hello.
As open/1, but does not send a hello message.
only_open(KeyOrName, ExtraOptions) -> Result
Types:
KeyOrName = ct:key_or_name()
ExtraOptions = [option()]
Result = {ok, handle()} | {error, error_reason()}
Opens a named NETCONF session, but does not send hello.
As open/2, but does not send a hello message.
open(Options) -> Result
Types:
Options = [option()]
Result = {ok, handle()} | {error, error_reason()}
Opens a NETCONF session and exchanges hello messages.
If the server options are specified in a configuration file, or if a named client is needed for
logging purposes (see section Logging in this module), use open/2 instead.
The opaque handle() reference returned from this function is required as client identifier when
calling any other function in this module.
open(KeyOrName, ExtraOption) -> Result
Types:
KeyOrName = ct:key_or_name()
ExtraOption = [option()]
Result = {ok, handle()} | {error, error_reason()}
Opens a named NETCONF session and exchanges hello messages.
If KeyOrName is a configured server_id() or a target_name() associated with such an Id, then the
options for this server are fetched from the configuration file.
The options list is added to those of the configuration file. If an option is specified in both
lists, the configuration file take precedence.
If the server is not specified in a configuration file, use open/1 instead.
The opaque handle() reference returned from this function can be used as client identifier when
calling any other function in this module. However, if KeyOrName is a target_name(), that is, if
the server is named through a call to ct:require/2 or a require statement in the test suite, then
this name can be used instead of handle().
See also ct:require/2.
send(Client, SimpleXml) -> Result
send(Client, SimpleXml, Timeout) -> Result
Types:
Client = client()
SimpleXml = simple_xml()
Timeout = timeout()
Result = simple_xml() | {error, error_reason()}
Sends an XML document to the server.
The specified XML document is sent "as is" to the server. This function can be used for sending
XML documents that cannot be expressed by other interface functions in this module.
send_rpc(Client, SimpleXml) -> Result
send_rpc(Client, SimpleXml, Timeout) -> Result
Types:
Client = client()
SimpleXml = simple_xml()
Timeout = timeout()
Result = [simple_xml()] | {error, error_reason()}
Sends a NETCONF rpc request to the server.
The specified XML document is wrapped in a valid NETCONF rpc request and sent to the server. The
message-id and namespace attributes are added to element rpc.
This function can be used for sending rpc requests that cannot be expressed by other interface
functions in this module.
session(Conn) -> Result
session(Conn, Options) -> Result
session(KeyOrName, Conn) -> Result
session(KeyOrName, Conn, Options) -> Result
Types:
Conn = handle()
Options = [session_option()]
KeyOrName = ct:key_or_name()
Result = {ok, handle()} | {error, error_reason()}
session_option() =
{timeout, timeout()} | {capability, string() | [string()]}
Opens a NETCONF session as a channel on the given SSH connection, and exchanges hello messages
with the server.
The opaque handle() reference returned from this function can be used as client identifier when
calling any other function in this module. However, if KeyOrName is used and it is a
target_name(), that is, if the server is named through a call to ct:require/2 or a require
statement in the test suite, then this name can be used instead of handle().
unlock(Client, Target) -> Result
unlock(Client, Target, Timeout) -> Result
Types:
Client = client()
Target = netconf_db()
Timeout = timeout()
Result = ok | {error, error_reason()}
Unlocks the configuration target.
If the client earlier has acquired a lock through lock/2,3, this operation releases the associated
lock. To access another target than running, the server must support :candidate and/or :startup.
Ericsson AB common_test 1.18.1 ct_netconfc(3erl)