NAME

       Event Management -

   Functions
       cudaError_t cudaEventCreate (cudaEvent_t *event)
           Creates an event object.
       __cudart_builtin__ cudaError_t cudaEventCreateWithFlags (cudaEvent_t *event, unsigned int
           flags)
           Creates an event object with the specified flags.
       __cudart_builtin__ cudaError_t cudaEventDestroy (cudaEvent_t event)
           Destroys an event object.
       cudaError_t cudaEventElapsedTime (float *ms, cudaEvent_t start, cudaEvent_t end)
           Computes the elapsed time between events.
       cudaError_t cudaEventQuery (cudaEvent_t event)
           Queries an event's status.
       __cudart_builtin__ cudaError_t cudaEventRecord (cudaEvent_t event, cudaStream_t stream=0)
           Records an event.
       cudaError_t cudaEventSynchronize (cudaEvent_t event)
           Waits for an event to complete.

Detailed Description

       \brief event management functions of the CUDA runtime API (cuda_runtime_api.h)

       This section describes the event management functions of the CUDA runtime application
       programming interface.

Function Documentation

   cudaError_t cudaEventCreate (cudaEvent_t * event)
       Creates an event object for the current device using cudaEventDefault.

       Parameters:
           event - Newly created event

       Returns:
           cudaSuccess, cudaErrorInvalidValue, cudaErrorLaunchFailure, cudaErrorMemoryAllocation

       Note:
           Note that this function may also return error codes from previous, asynchronous
           launches.

       See also:
           cudaEventCreate (C++ API), cudaEventCreateWithFlags, cudaEventRecord, cudaEventQuery,
           cudaEventSynchronize, cudaEventDestroy, cudaEventElapsedTime, cudaStreamWaitEvent,
           cuEventCreate

   __cudart_builtin__ cudaError_t cudaEventCreateWithFlags (cudaEvent_t * event, unsigned int
       flags)
       Creates an event object for the current device with the specified flags. Valid flags
       include:

       • cudaEventDefault: Default event creation flag.

       • cudaEventBlockingSync: Specifies that event should use blocking synchronization. A host
         thread that uses cudaEventSynchronize() to wait on an event created with this flag will
         block until the event actually completes.

       • cudaEventDisableTiming: Specifies that the created event does not need to record timing
         data. Events created with this flag specified and the cudaEventBlockingSync flag not
         specified will provide the best performance when used with cudaStreamWaitEvent() and
         cudaEventQuery().

       • cudaEventInterprocess: Specifies that the created event may be used as an interprocess
         event by cudaIpcGetEventHandle(). cudaEventInterprocess must be specified along with
         cudaEventDisableTiming.

       Parameters:
           event - Newly created event
           flags - Flags for new event

       Returns:
           cudaSuccess, cudaErrorInvalidValue, cudaErrorLaunchFailure, cudaErrorMemoryAllocation

       Note:
           Note that this function may also return error codes from previous, asynchronous
           launches.

       See also:
           cudaEventCreate (C API), cudaEventSynchronize, cudaEventDestroy, cudaEventElapsedTime,
           cudaStreamWaitEvent, cuEventCreate

   __cudart_builtin__ cudaError_t cudaEventDestroy (cudaEvent_t event)
       Destroys the event specified by event.

       An event may be destroyed before it is complete (i.e., while cudaEventQuery() would return
       cudaErrorNotReady). In this case, the call does not block on completion of the event, and
       any associated resources will automatically be released asynchronously at completion.

       Parameters:
           event - Event to destroy

       Returns:
           cudaSuccess, cudaErrorInvalidValue, cudaErrorLaunchFailure

       Note:
           Note that this function may also return error codes from previous, asynchronous
           launches.

       See also:
           cudaEventCreate (C API), cudaEventCreateWithFlags, cudaEventQuery,
           cudaEventSynchronize, cudaEventRecord, cudaEventElapsedTime, cuEventDestroy

   cudaError_t cudaEventElapsedTime (float * ms, cudaEvent_t start, cudaEvent_t end)
       Computes the elapsed time between two events (in milliseconds with a resolution of around
       0.5 microseconds).

       If either event was last recorded in a non-NULL stream, the resulting time may be greater
       than expected (even if both used the same stream handle). This happens because the
       cudaEventRecord() operation takes place asynchronously and there is no guarantee that the
       measured latency is actually just between the two events. Any number of other different
       stream operations could execute in between the two measured events, thus altering the
       timing in a significant way.

       If cudaEventRecord() has not been called on either event, then
       cudaErrorInvalidResourceHandle is returned. If cudaEventRecord() has been called on both
       events but one or both of them has not yet been completed (that is, cudaEventQuery() would
       return cudaErrorNotReady on at least one of the events), cudaErrorNotReady is returned. If
       either event was created with the cudaEventDisableTiming flag, then this function will
       return cudaErrorInvalidResourceHandle.

       Parameters:
           ms - Time between start and end in ms
           start - Starting event
           end - Ending event

       Returns:
           cudaSuccess, cudaErrorNotReady, cudaErrorInvalidValue, cudaErrorInvalidResourceHandle,
           cudaErrorLaunchFailure

       Note:
           Note that this function may also return error codes from previous, asynchronous
           launches.

       See also:
           cudaEventCreate (C API), cudaEventCreateWithFlags, cudaEventQuery,
           cudaEventSynchronize, cudaEventDestroy, cudaEventRecord, cuEventElapsedTime

   cudaError_t cudaEventQuery (cudaEvent_t event)
       Queries the status of all work currently captured by event. See cudaEventRecord() for
       details on what is captured by an event.

       Returns cudaSuccess if all captured work has been completed, or cudaErrorNotReady if any
       captured work is incomplete.

       For the purposes of Unified Memory, a return value of cudaSuccess is equivalent to having
       called cudaEventSynchronize().

       Parameters:
           event - Event to query

       Returns:
           cudaSuccess, cudaErrorNotReady, cudaErrorInvalidValue, cudaErrorInvalidResourceHandle,
           cudaErrorLaunchFailure

       Note:
           Note that this function may also return error codes from previous, asynchronous
           launches.

       See also:
           cudaEventCreate (C API), cudaEventCreateWithFlags, cudaEventRecord,
           cudaEventSynchronize, cudaEventDestroy, cudaEventElapsedTime, cuEventQuery

   __cudart_builtin__ cudaError_t cudaEventRecord (cudaEvent_t event, cudaStream_t stream = 0)
       Captures in event the contents of stream at the time of this call. event and stream must
       be on the same device. Calls such as cudaEventQuery() or cudaStreamWaitEvent() will then
       examine or wait for completion of the work that was captured. Uses of stream after this
       call do not modify event. See note on default stream behavior for what is captured in the
       default case.

       cudaEventRecord() can be called multiple times on the same event and will overwrite the
       previously captured state. Other APIs such as cudaStreamWaitEvent() use the most recently
       captured state at the time of the API call, and are not affected by later calls to
       cudaEventRecord(). Before the first call to cudaEventRecord(), an event represents an
       empty set of work, so for example cudaEventQuery() would return cudaSuccess.

       Parameters:
           event - Event to record
           stream - Stream in which to record event

       Returns:
           cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidResourceHandle,
           cudaErrorLaunchFailure

       Note:
           This function uses standard  semantics.

           Note that this function may also return error codes from previous, asynchronous
           launches.

       See also:
           cudaEventCreate (C API), cudaEventCreateWithFlags, cudaEventQuery,
           cudaEventSynchronize, cudaEventDestroy, cudaEventElapsedTime, cudaStreamWaitEvent,
           cuEventRecord

   cudaError_t cudaEventSynchronize (cudaEvent_t event)
       Waits until the completion of all work currently captured in event. See cudaEventRecord()
       for details on what is captured by an event.

       Waiting for an event that was created with the cudaEventBlockingSync flag will cause the
       calling CPU thread to block until the event has been completed by the device. If the
       cudaEventBlockingSync flag has not been set, then the CPU thread will busy-wait until the
       event has been completed by the device.

       Parameters:
           event - Event to wait for

       Returns:
           cudaSuccess, cudaErrorInvalidValue, cudaErrorInvalidResourceHandle,
           cudaErrorLaunchFailure

       Note:
           Note that this function may also return error codes from previous, asynchronous
           launches.

       See also:
           cudaEventCreate (C API), cudaEventCreateWithFlags, cudaEventRecord, cudaEventQuery,
           cudaEventDestroy, cudaEventElapsedTime, cuEventSynchronize

Author

       Generated automatically by Doxygen from the source code.