Provided by: manpages-posix-dev_2013a-2_all 
PROLOG
This manual page is part of the POSIX Programmer's Manual. The Linux implementation of this interface
may differ (consult the corresponding Linux manual page for details of Linux behavior), or the interface
may not be implemented on Linux.
NAME
fcntl — file control
SYNOPSIS
#include <fcntl.h>
int fcntl(int fildes, int cmd, ...);
DESCRIPTION
The fcntl() function shall perform the operations described below on open files. The fildes argument is a
file descriptor.
The available values for cmd are defined in <fcntl.h> and are as follows:
F_DUPFD Return a new file descriptor which shall be the lowest numbered available (that is, not
already open) file descriptor greater than or equal to the third argument, arg, taken as an
integer of type int. The new file descriptor shall refer to the same open file description
as the original file descriptor, and shall share any locks. The FD_CLOEXEC flag associated
with the new file descriptor shall be cleared to keep the file open across calls to one of
the exec functions.
F_DUPFD_CLOEXEC
Like F_DUPFD, but the FD_CLOEXEC flag associated with the new file descriptor shall be set.
F_GETFD Get the file descriptor flags defined in <fcntl.h> that are associated with the file
descriptor fildes. File descriptor flags are associated with a single file descriptor and
do not affect other file descriptors that refer to the same file.
F_SETFD Set the file descriptor flags defined in <fcntl.h>, that are associated with fildes, to the
third argument, arg, taken as type int. If the FD_CLOEXEC flag in the third argument is 0,
the file descriptor shall remain open across the exec functions; otherwise, the file
descriptor shall be closed upon successful execution of one of the exec functions.
F_GETFL Get the file status flags and file access modes, defined in <fcntl.h>, for the file
description associated with fildes. The file access modes can be extracted from the return
value using the mask O_ACCMODE, which is defined in <fcntl.h>. File status flags and file
access modes are associated with the file description and do not affect other file
descriptors that refer to the same file with different open file descriptions. The flags
returned may include non-standard file status flags which the application did not set,
provided that these additional flags do not alter the behavior of a conforming application.
F_SETFL Set the file status flags, defined in <fcntl.h>, for the file description associated with
fildes from the corresponding bits in the third argument, arg, taken as type int. Bits
corresponding to the file access mode and the file creation flags, as defined in <fcntl.h>,
that are set in arg shall be ignored. If any bits in arg other than those mentioned here
are changed by the application, the result is unspecified. If fildes does not support non-
blocking operations, it is unspecified whether the O_NONBLOCK flag will be ignored.
F_GETOWN If fildes refers to a socket, get the process or process group ID specified to receive
SIGURG signals when out-of-band data is available. Positive values indicate a process ID;
negative values, other than −1, indicate a process group ID. If fildes does not refer to a
socket, the results are unspecified.
F_SETOWN If fildes refers to a socket, set the process or process group ID specified to receive
SIGURG signals when out-of-band data is available, using the value of the third argument,
arg, taken as type int. Positive values indicate a process ID; negative values, other than
−1, indicate a process group ID. If fildes does not refer to a socket, the results are
unspecified.
The following values for cmd are available for advisory record locking. Record locking shall be supported
for regular files, and may be supported for other files.
F_GETLK Get the first lock which blocks the lock description pointed to by the third argument, arg,
taken as a pointer to type struct flock, defined in <fcntl.h>. The information retrieved
shall overwrite the information passed to fcntl() in the structure flock. If no lock is
found that would prevent this lock from being created, then the structure shall be left
unchanged except for the lock type which shall be set to F_UNLCK.
F_SETLK Set or clear a file segment lock according to the lock description pointed to by the third
argument, arg, taken as a pointer to type struct flock, defined in <fcntl.h>. F_SETLK can
establish shared (or read) locks (F_RDLCK) or exclusive (or write) locks (F_WRLCK), as well
as to remove either type of lock (F_UNLCK). F_RDLCK, F_WRLCK, and F_UNLCK are defined in
<fcntl.h>. If a shared or exclusive lock cannot be set, fcntl() shall return immediately
with a return value of −1.
F_SETLKW This command shall be equivalent to F_SETLK except that if a shared or exclusive lock is
blocked by other locks, the thread shall wait until the request can be satisfied. If a
signal that is to be caught is received while fcntl() is waiting for a region, fcntl()
shall be interrupted. Upon return from the signal handler, fcntl() shall return −1 with
errno set to [EINTR], and the lock operation shall not be done.
Additional implementation-defined values for cmd may be defined in <fcntl.h>. Their names shall start
with F_.
When a shared lock is set on a segment of a file, other processes shall be able to set shared locks on
that segment or a portion of it. A shared lock prevents any other process from setting an exclusive lock
on any portion of the protected area. A request for a shared lock shall fail if the file descriptor was
not opened with read access.
An exclusive lock shall prevent any other process from setting a shared lock or an exclusive lock on any
portion of the protected area. A request for an exclusive lock shall fail if the file descriptor was not
opened with write access.
The structure flock describes the type (l_type), starting offset (l_whence), relative offset (l_start),
size (l_len), and process ID (l_pid) of the segment of the file to be affected.
The value of l_whence is SEEK_SET, SEEK_CUR, or SEEK_END, to indicate that the relative offset l_start
bytes shall be measured from the start of the file, current position, or end of the file, respectively.
The value of l_len is the number of consecutive bytes to be locked. The value of l_len may be negative
(where the definition of off_t permits negative values of l_len). The l_pid field is only used with
F_GETLK to return the process ID of the process holding a blocking lock. After a successful F_GETLK
request, when a blocking lock is found, the values returned in the flock structure shall be as follows:
l_type Type of blocking lock found.
l_whence SEEK_SET.
l_start Start of the blocking lock.
l_len Length of the blocking lock.
l_pid Process ID of the process that holds the blocking lock.
If the command is F_SETLKW and the process must wait for another process to release a lock, then the
range of bytes to be locked shall be determined before the fcntl() function blocks. If the file size or
file descriptor seek offset change while fcntl() is blocked, this shall not affect the range of bytes
locked.
If l_len is positive, the area affected shall start at l_start and end at l_start+l_len−1. If l_len is
negative, the area affected shall start at l_start+l_len and end at l_start−1. Locks may start and
extend beyond the current end of a file, but shall not extend before the beginning of the file. A lock
shall be set to extend to the largest possible value of the file offset for that file by setting l_len to
0. If such a lock also has l_start set to 0 and l_whence is set to SEEK_SET, the whole file shall be
locked.
There shall be at most one type of lock set for each byte in the file. Before a successful return from
an F_SETLK or an F_SETLKW request when the calling process has previously existing locks on bytes in the
region specified by the request, the previous lock type for each byte in the specified region shall be
replaced by the new lock type. As specified above under the descriptions of shared locks and exclusive
locks, an F_SETLK or an F_SETLKW request (respectively) shall fail or block when another process has
existing locks on bytes in the specified region and the type of any of those locks conflicts with the
type specified in the request.
All locks associated with a file for a given process shall be removed when a file descriptor for that
file is closed by that process or the process holding that file descriptor terminates. Locks are not
inherited by a child process.
A potential for deadlock occurs if a process controlling a locked region is put to sleep by attempting to
lock the locked region of another process. If the system detects that sleeping until a locked region is
unlocked would cause a deadlock, fcntl() shall fail with an [EDEADLK] error.
An unlock (F_UNLCK) request in which l_len is non-zero and the offset of the last byte of the requested
segment is the maximum value for an object of type off_t, when the process has an existing lock in which
l_len is 0 and which includes the last byte of the requested segment, shall be treated as a request to
unlock from the start of the requested segment with an l_len equal to 0. Otherwise, an unlock (F_UNLCK)
request shall attempt to unlock only the requested segment.
When the file descriptor fildes refers to a shared memory object, the behavior of fcntl() shall be the
same as for a regular file except the effect of the following values for the argument cmd shall be
unspecified: F_SETFL, F_GETLK, F_SETLK, and F_SETLKW.
If fildes refers to a typed memory object, the result of the fcntl() function is unspecified.
RETURN VALUE
Upon successful completion, the value returned shall depend on cmd as follows:
F_DUPFD A new file descriptor.
F_DUPFD_CLOEXEC
A new file descriptor.
F_GETFD Value of flags defined in <fcntl.h>. The return value shall not be negative.
F_SETFD Value other than −1.
F_GETFL Value of file status flags and access modes. The return value is not negative.
F_SETFL Value other than −1.
F_GETLK Value other than −1.
F_SETLK Value other than −1.
F_SETLKW Value other than −1.
F_GETOWN Value of the socket owner process or process group; this will not be −1.
F_SETOWN Value other than −1.
Otherwise, −1 shall be returned and errno set to indicate the error.
ERRORS
The fcntl() function shall fail if:
EACCES or EAGAIN
The cmd argument is F_SETLK; the type of lock (l_type) is a shared (F_RDLCK) or exclusive
(F_WRLCK) lock and the segment of a file to be locked is already exclusive-locked by another
process, or the type is an exclusive lock and some portion of the segment of a file to be locked
is already shared-locked or exclusive-locked by another process.
EBADF The fildes argument is not a valid open file descriptor, or the argument cmd is F_SETLK or
F_SETLKW, the type of lock, l_type, is a shared lock (F_RDLCK), and fildes is not a valid file
descriptor open for reading, or the type of lock, l_type, is an exclusive lock (F_WRLCK), and
fildes is not a valid file descriptor open for writing.
EINTR The cmd argument is F_SETLKW and the function was interrupted by a signal.
EINVAL The cmd argument is invalid, or the cmd argument is F_DUPFD or F_DUPFD_CLOEXEC and arg is negative
or greater than or equal to {OPEN_MAX}, or the cmd argument is F_GETLK, F_SETLK, or F_SETLKW and
the data pointed to by arg is not valid, or fildes refers to a file that does not support locking.
EMFILE The argument cmd is F_DUPFD or F_DUPFD_CLOEXEC and all file descriptors available to the process
are currently open, or no file descriptors greater than or equal to arg are available.
ENOLCK The argument cmd is F_SETLK or F_SETLKW and satisfying the lock or unlock request would result in
the number of locked regions in the system exceeding a system-imposed limit.
EOVERFLOW
One of the values to be returned cannot be represented correctly.
EOVERFLOW
The cmd argument is F_GETLK, F_SETLK, or F_SETLKW and the smallest or, if l_len is non-zero, the
largest offset of any byte in the requested segment cannot be represented correctly in an object
of type off_t.
The fcntl() function may fail if:
EDEADLK
The cmd argument is F_SETLKW, the lock is blocked by a lock from another process, and putting the
calling process to sleep to wait for that lock to become free would cause a deadlock.
The following sections are informative.
EXAMPLES
Locking and Unlocking a File
The following example demonstrates how to place a lock on bytes 100 to 109 of a file and then later
remove it. F_SETLK is used to perform a non-blocking lock request so that the process does not have to
wait if an incompatible lock is held by another process; instead the process can take some other action.
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <stdio.h>
int
main(int argc, char *argv[])
{
int fd;
struct flock fl;
fd = open("testfile", O_RDWR);
if (fd == -1)
/* Handle error */;
/* Make a non-blocking request to place a write lock
on bytes 100-109 of testfile */
fl.l_type = F_WRLCK;
fl.l_whence = SEEK_SET;
fl.l_start = 100;
fl.l_len = 10;
if (fcntl(fd, F_SETLK, &fl) == −1) {
if (errno == EACCES || errno == EAGAIN) {
printf("Already locked by another process\n");
/* We can't get the lock at the moment */
} else {
/* Handle unexpected error */;
}
} else { /* Lock was granted... */
/* Perform I/O on bytes 100 to 109 of file */
/* Unlock the locked bytes */
fl.l_type = F_UNLCK;
fl.l_whence = SEEK_SET;
fl.l_start = 100;
fl.l_len = 10;
if (fcntl(fd, F_SETLK, &fl) == −1)
/* Handle error */;
}
exit(EXIT_SUCCESS);
} /* main */
Setting the Close-on-Exec Flag
The following example demonstrates how to set the close-on-exec flag for the file descriptor fd.
#include <unistd.h>
#include <fcntl.h>
...
int flags;
flags = fcntl(fd, F_GETFD);
if (flags == −1)
/* Handle error */;
flags |= FD_CLOEXEC;
if (fcntl(fd, F_SETFD, flags) == −1)
/* Handle error */;"
APPLICATION USAGE
The arg values to F_GETFD, F_SETFD, F_GETFL, and F_SETFL all represent flag values to allow for future
growth. Applications using these functions should do a read-modify-write operation on them, rather than
assuming that only the values defined by this volume of POSIX.1‐2008 are valid. It is a common error to
forget this, particularly in the case of F_SETFD. Some implementations set additional file status flags
to advise the application of default behavior, even though the application did not request these flags.
RATIONALE
The ellipsis in the SYNOPSIS is the syntax specified by the ISO C standard for a variable number of
arguments. It is used because System V uses pointers for the implementation of file locking functions.
This volume of POSIX.1‐2008 permits concurrent read and write access to file data using the fcntl()
function; this is a change from the 1984 /usr/group standard and early proposals. Without concurrency
controls, this feature may not be fully utilized without occasional loss of data.
Data losses occur in several ways. One case occurs when several processes try to update the same record,
without sequencing controls; several updates may occur in parallel and the last writer ``wins''. Another
case is a bit-tree or other internal list-based database that is undergoing reorganization. Without
exclusive use to the tree segment by the updating process, other reading processes chance getting lost in
the database when the index blocks are split, condensed, inserted, or deleted. While fcntl() is useful
for many applications, it is not intended to be overly general and does not handle the bit-tree example
well.
This facility is only required for regular files because it is not appropriate for many devices such as
terminals and network connections.
Since fcntl() works with ``any file descriptor associated with that file, however it is obtained'', the
file descriptor may have been inherited through a fork() or exec operation and thus may affect a file
that another process also has open.
The use of the open file description to identify what to lock requires extra calls and presents problems
if several processes are sharing an open file description, but there are too many implementations of the
existing mechanism for this volume of POSIX.1‐2008 to use different specifications.
Another consequence of this model is that closing any file descriptor for a given file (whether or not it
is the same open file description that created the lock) causes the locks on that file to be relinquished
for that process. Equivalently, any close for any file/process pair relinquishes the locks owned on that
file for that process. But note that while an open file description may be shared through fork(), locks
are not inherited through fork(). Yet locks may be inherited through one of the exec functions.
The identification of a machine in a network environment is outside the scope of this volume of
POSIX.1‐2008. Thus, an l_sysid member, such as found in System V, is not included in the locking
structure.
Changing of lock types can result in a previously locked region being split into smaller regions.
Mandatory locking was a major feature of the 1984 /usr/group standard.
For advisory file record locking to be effective, all processes that have access to a file must cooperate
and use the advisory mechanism before doing I/O on the file. Enforcement-mode record locking is important
when it cannot be assumed that all processes are cooperating. For example, if one user uses an editor to
update a file at the same time that a second user executes another process that updates the same file and
if only one of the two processes is using advisory locking, the processes are not cooperating.
Enforcement-mode record locking would protect against accidental collisions.
Secondly, advisory record locking requires a process using locking to bracket each I/O operation with
lock (or test) and unlock operations. With enforcement-mode file and record locking, a process can lock
the file once and unlock when all I/O operations have been completed. Enforcement-mode record locking
provides a base that can be enhanced; for example, with sharable locks. That is, the mechanism could be
enhanced to allow a process to lock a file so other processes could read it, but none of them could write
it.
Mandatory locks were omitted for several reasons:
1. Mandatory lock setting was done by multiplexing the set-group-ID bit in most implementations; this
was confusing, at best.
2. The relationship to file truncation as supported in 4.2 BSD was not well specified.
3. Any publicly readable file could be locked by anyone. Many historical implementations keep the
password database in a publicly readable file. A malicious user could thus prohibit logins. Another
possibility would be to hold open a long-distance telephone line.
4. Some demand-paged historical implementations offer memory mapped files, and enforcement cannot be
done on that type of file.
Since sleeping on a region is interrupted with any signal, alarm() may be used to provide a timeout
facility in applications requiring it. This is useful in deadlock detection. Since implementation of full
deadlock detection is not always feasible, the [EDEADLK] error was made optional.
FUTURE DIRECTIONS
None.
SEE ALSO
alarm(), close(), exec, open(), sigaction()
The Base Definitions volume of POSIX.1‐2008, <fcntl.h>, <signal.h>
COPYRIGHT
Portions of this text are reprinted and reproduced in electronic form from IEEE Std 1003.1, 2013 Edition,
Standard for Information Technology -- Portable Operating System Interface (POSIX), The Open Group Base
Specifications Issue 7, Copyright (C) 2013 by the Institute of Electrical and Electronics Engineers, Inc
and The Open Group. (This is POSIX.1-2008 with the 2013 Technical Corrigendum 1 applied.) In the event
of any discrepancy between this version and the original IEEE and The Open Group Standard, the original
IEEE and The Open Group Standard is the referee document. The original Standard can be obtained online at
http://www.unix.org/online.html .
Any typographical or formatting errors that appear in this page are most likely to have been introduced
during the conversion of the source files to man page format. To report such errors, see
https://www.kernel.org/doc/man-pages/reporting_bugs.html .
IEEE/The Open Group 2013 FCNTL(3POSIX)