Provided by: libpcp3-dev_5.0.3-1_amd64 
NAME
pmRegisterDerived, pmRegisterDerivedMetric - register a derived metric name and definition
C SYNOPSIS
#include <pcp/pmapi.h>
char *pmRegisterDerived(char *name, char *expr);
int pmRegisterDerivedMetric(char *name, char *expr, char **errmsg);
cc ... -lpcp
DESCRIPTION
Derived metrics provide a way of extending the Performance Metrics Name Space (PMNS) with new metrics
defined at the PCP client-side using expressions over the existing performance metrics.
Typical uses would be to aggregate a number of similar metrics to provide a higher-level summary metric
or to support the ``delta V over delta V'' class of metrics that are not possible in the base data
semantics of PCP. An example of the latter class would be the average I/O size, defined as
delta(disk.dev.total_bytes) / delta(disk.dev.total)
where both of the disk.dev metrics are counters, and what is required is to to sample both metrics,
compute the difference between the current and previous values and then calculate the ratio of these
differences.
The arguments to pmRegisterDerived are the name of the new derived metric and expr is an expression
defining how the values of name should be computed.
pmRegisterDerivedMetric is the exact functional equivalent to pmRegisterDerived except that it provides a
simplified model of error handling, where a formatted message is returned via the errmsg parameter.
Syntactic checking is performed at the time pmRegisterDerived is called, but semantic checking is
deferred until each new PMAPI context is created with pmNewContext(3) or re-established with
pmReconnectContext(3), at which time the PMNS and metadata is available to allow semantic checking and
the metadata of the derived metrics to be determined. This means pmRegisterDerived does not apply
retrospectively to any open PMAPI contexts, nor to any PMAPI contexts already open at the time
pmRegisterDerived is called, so the normal use would be to make all calls to pmRegisterDerived (possibly
via pmLoadDerivedConfig(3)) or pmRegisterDerivedMetric and then call pmNewContext(3).
name should follow the syntactic rules for the names of performance metrics, namely one or more
components separated with a dot (``.''), and each component must begin with an alphabetic followed by
zero or more characters drawn from the alphabetics, numerics and underscore (``_''). For more details,
refer to PCPIntro(1) and PMNS(5).
name must be unique across all derived metrics and should not match the name of any regular metric in the
PMNS. It is acceptable for name to share some part of its prefix with an existing subtree of the PMNS,
e.g. the average I/O size metric above could be named disk.dev.avgsz which would place it amongst the
other disk.dev metrics in the PMNS. Alternatively, derived metrics could populate their own subtree of
the PMNS, e.g. the average I/O size metric above could be named my.summary.disk.avgsz.
The expression expr follows these syntactic rules:
* Terminal elements are either names of existing metrics or numeric constants. Recursive definitions are
not allowed, so only the names of regular metrics (not other derived metrics) may be used. Numeric
constants are either integers constrained to the precision of 32-bit unsigned integers or double
precision floating point numbers.
* The usual binary arithmetic operators are supported, namely addition (``+''), subtraction (``-''),
multiplication (``*'') and division (``/'') with the normal precedence rules where multiplication and
division have higher precedence than addition and subtraction, so a+b*c is evaluated as a+(b*c).
* Unary negation may be used, e.g. -3*some.metric.
* C-style relational operators are supported, namely ``<'', ``<='', ``=='', ``>='', ``>'' and ``!=''.
Relational expresssions return a value as a 32-bit unsigned number being 0 for false and 1 for true.
The expected operator precedence rules apply, so arithmetic operators have higher precedence than
relational operators, and a-b>c+d is evaluated as (a-b)>(c+d). All the relational operators have equal
precedence, so the (slightly odd) expression involving consecutive relational operators a>b!=c is
evaluated as (a>b)!=c.
* C-style boolean operators are supported, namely and (``&&'') and or (``||''). Boolean expresssions
return a value as a 32-bit unsigned number being 0 for false and 1 for true. The expected operator
precedence rules apply, so relational operators have higher precedence than boolean operators, and
a>b*c&&d<=e+f is evaluated as (a>(b*c))&&(d<=(e+f)). Both the boolean operators have equal precedence,
so the expression involving consecutive boolean operators a>=b||b>c&&d!=e||f>g is evaluated as
(((a>=b)||(b>c))&&(d!=e))||(f>g).
* Additionally, the ``!'' operator may be used to negate a boolean or relational expression, returning a
value as a 32-bit unsigned number being 0 for false and 1 for true. The expected operator precedence
rules apply, so boolean (and relational) operators have higher precedence than boolean negation, and
!a>b||c<d is evaluated as !((a>b)||(c<d)), while !a<b+c is evaluated as !(a<(b+c)).
* C-style ternary conditional expressions are supported. In general terms the expression check ? foo :
bar is evaluated as foo (the ``true'' operand) if check (the ``guard'') is true, else the expression
evaluates to bar (the ``false'' operand). Some special semantic rules apply to the ``guard''
expression and the other two operand expressions:
(a) Each expression may involve a singular value or a set of values (when the expression involves one
or more metrics with an instance domain).
(b) All expressions with a set of values must be defined over the same instance domain.
(c) Both operand expressions must have the same metadata, so the same metric type, semantics and units
(dimension and scale).
(d) The ``guard'' expression must have an aritmetic or relational or boolean value, so that it can be
evaluated as 0 for false, else true.
(e) If the ``guard'' expression has a singular value and one or more of the other operand expressions
involves an instance domain, the ``guard'' applies to all instances.
(f) If the ``guard'' expression has a set of values and one or more of the other operand expressions
involves an instance domain, the ``guard'' is evaluated once for each instance (there must be one
instance domain as per rule (b) above).
(g) If one of the operand expressions has a singular value and the other has a set of values, and the
singular value is selected based on the evaluation of the ``guard'', then the result is a set of
values (all the same) with instance enumeration being taken from the other operand expression. For
example in the expression: foo ? scalar : set, if foo is true, then the result is a set of values
(all having the same value, scalar) over the instance domain of set.
* Selection of a single instance can be specified by the construct ``[instance_name]'' which may be
appended to a metric name or a parenthesized expression. For example:
fw.bytes = network.interface.in.bytes[eth1] + \
network.interface.out.bytes[eth1]
or (equivalently):
fw.bytes = (network.interface.in.bytes + \
network.interface.out.bytes)[eth1]
All characters between the ``['' and ``]'' are considered to be part of the (external) instance name,
so be careful to avoid any spurious white space. A backslash may be used as an escape prefix in the
(unlikely) event that the external instance name contains a ``]''.
* Numeric constants can also be specified using the mkconst() constructor which takes a number of
arguments: the first is a numeric constant (either integer or floating point), then follow one or more
parameters of the form tag=value or tag= where the allowed values of tag and value are as follows:
┌───────────┬───────────────────────────────────────────────┐
│ tag │ value │
├───────────┼───────────────────────────────────────────────┤
│ type │ one of the numeric metric types from │
│ │ <pcp/pmapi.h>, stripped of the PM_TYPE_ │
│ │ prefix, so 32, U32, 64, U64, FLOAT or DOUBLE. │
├───────────┼───────────────────────────────────────────────┤
│ semantics │ one of the semantic types from <pcp/pmapi.h>, │
│ │ stripped of the PM_SEM_ prefix, so COUNTER, │
│ │ INSTANT or DISCRETE. │
├───────────┼───────────────────────────────────────────────┤
│ units │ a specification of dimension and scale │
│ │ (together forming the units), in the syntax │
│ │ accepted by pmParseUnitsStr(3). │
└───────────┴───────────────────────────────────────────────┘
The value may optionally be enclosed in double quotes, and may appear in any mix of upper and/or lower
case. The tag must be in lower case as shown in the table above.
This is most useful when the expression semantics require matching type and/or semantics and/or units
for operands, e.g.
idle = mem.util.free > mkconst(10485760, units=Kbyte)
avg_io_size = delta(disk.dev.total) == 0 ? \
-mkconst(1.0, semantics=instant, units="kbyte / count") : \
delta(disk.dev.total_bytes) / delta(disk.dev.total)
* Expressions may be rescaled using the rescale function that takes two arguments. The first is an
arithmetic expression to be rescaled, and the second is the desired units after rescaling that is a
string value in the syntax accepted by pmParseUnitsStr(3). For example:
rescale(network.interface.total.bytes, "Mbytes/hour")
The expression and the desired units must both have the same dimension, e.g Space=1, Time=-1 and
Count=0 in the example above.
* The following unary functions operate on a single performance metric and return one or more values.
For all functions (except count(), defined() and instant()), the type of the operand metric must be
arithmetic (integer of various sizes and signedness, float or double).
┌────────────┬───────────────────────────────────────────────┐
│ Function │ Value │
├────────────┼───────────────────────────────────────────────┤
│ avg(x) │ A singular instance being the average value │
│ │ across all instances for the metric x. │
├────────────┼───────────────────────────────────────────────┤
│ count(x) │ A singular instance being the count of the │
│ │ number of instances for the metric x. As a │
│ │ special case, if fetching the metric x │
│ │ returns an error, then count(x) will be 0. │
├────────────┼───────────────────────────────────────────────┤
│ defined(x) │ A boolean value that is true (``1'') if the │
│ │ metric x is defined in the PMNS, else false │
│ │ (``0''). The function is evaluated when a │
│ │ new PMAPI context is created with │
│ │ pmNewContext(3) or re-established with │
│ │ pmReconnectContext(3). So any subsequent │
│ │ changes to the PMNS after the PMAPI context │
│ │ has been established will not change the │
│ │ value of this function in the expression │
│ │ evaluation. │
├────────────┼───────────────────────────────────────────────┤
│ delta(x) │ Returns the difference in values for the │
│ │ metric x between one call to pmFetch(3) and │
│ │ the next. There is one value in the result │
│ │ for each instance that appears in both the │
│ │ current and the previous sample. │
├────────────┼───────────────────────────────────────────────┤
│ rate(x) │ Returns the difference in values for the │
│ │ metric x between one call to pmFetch(3) and │
│ │ the next divided by the elapsed time between │
│ │ the calls to pmFetch(3). The semantics of │
│ │ the derived metric are based on the semantics │
│ │ of the operand (x) with the dimension in the │
│ │ time domain decreased by one and scaling if │
│ │ required in the time utilization case where │
│ │ the operand is in units of time, and the │
│ │ derived metric is unitless. This mimics the │
│ │ rate conversion applied to counter metrics by │
│ │ tools such as pmval(1), pmie(1) and │
│ │ pmchart(1). There is one value in the result │
│ │ for each instance that appears in both the │
│ │ current and the previous sample. │
├────────────┼───────────────────────────────────────────────┤
│ instant(x) │ Returns the current value of the metric x, │
│ │ even it has the semantics of a counter, i.e. │
│ │ PM_SEM_COUNTER. The semantics of the derived │
│ │ metric are based on the semantics of the │
│ │ operand (x); if x has semantics │
│ │ PM_SEM_COUNTER, the semantics of instant(x) │
│ │ is PM_SEM_INSTANT, otherwise the semantics of │
│ │ the derived metric is the same as the │
│ │ semantics of the metric x. │
├────────────┼───────────────────────────────────────────────┤
│ max(x) │ A singular instance being the maximum value │
│ │ across all instances for the metric x. │
├────────────┼───────────────────────────────────────────────┤
│ min(x) │ A singular instance being the minimum value │
│ │ across all instances for the metric x. │
├────────────┼───────────────────────────────────────────────┤
│ sum(x) │ A singular instance being the sum of the │
│ │ values across all instances for the metric x. │
└────────────┴───────────────────────────────────────────────┘
* The matchinst function may be used to select a subset of the instances from an instance domain for a
metric or expression. The function takes two arguments:
(a) A instance filter that consists of an optional negation operator ``!'' followed by a regular
expression delimited by ``/'' characters. The regular expression follows the POSIX Extended
Regular Expression syntax as described in regex(3). Backslashes may be used as escape prefixes,
but double backslash is required to escape any regular expression special characters, e.g. for the
(extremely unlikely) case of wanting to match instance names like ``some*text/other[text]'' a
regular expression of the form /some\\*text\/other\\[text]/ would be required. If present, the
negation operator reverses the sense of the filtering, so all instances not matching the regular
expression will be selected.
(b) A metric or expression that must be defined over an instance domain.
For example, the following expression will have values for the metric network.interface.in.bytes for
all network interfaces except the loopback and virtual bridge devices:
matchinst(!/^(lo)|(vbir)/, network.interface.in.bytes)
* The scalar function may be used convert a metric or expression defined over an instance domain into a
scalar value that can be used in other expressions. For example:
net.in.bytes = scalar(network.interface.in.bytes[eth0]) + \
scalar(network.interface.in.bytes[eth1])
The instance domain is removed from the metadata for the result and the instance identifier is removed
from the value during fetching.
If the metric or expression involves more than one instance then the result is formed by picking the
first instance - this is arbitrary and implies the scalar function should only be used for metrics or
expressions that are expected to contain zero or one instances, e.g. the construct ``[instance_name]''
or the matchinst function with a pattern that matches at most one instance.
* Parenthesis may be used for explicit grouping.
* Lines beginning with ``#'' are treated as comments and ignored.
* White space is ignored.
SEMANTIC CHECKS AND RULES
There are a number of conversions required to determine the metadata for a derived metric and to ensure
the semantics of the expressions are sound.
In an arithmetic expression or a relational expression, if the semantics of both operands is not a
counter (i.e. PM_SEM_INSTANT or PM_SEM_DISCRETE) then the result will have semantics PM_SEM_INSTANT
unless both operands are PM_SEM_DISCRETE in which case the result is also PM_SEM_DISCRETE.
For an arithmetic expression, the dimension of each operand must be the same. For a relational
expression, the dimension of each operand must be the same, except that numeric constants (with no
dimension) are allowed, e.g. in the expression network.interface.in.drops > 0 .
To prevent arbitrary and non-sensical combinations some restrictions apply to expressions that combine
metrics with counter semantics to produce a result with counter semantics. For an arithmetic expression,
if both operands have the semantics of a counter, then only addition or subraction is allowed, or if the
left operand is a counter and the right operand is not, then only multiplication or division are allowed,
or if the left operand is not a counter and the right operand is a counter, then only multiplication is
allowed.
Because relational expressions use the current value only and produce a result that is not a counter,
either or both operands of a relational expression may be counters.
The mapping of the pmUnits of the metadata uses the following rules:
* If both operands have a dimension of Count and the scales are not the same, use the larger scale and
convert the values of the operand with the smaller scale.
* If both operands have a dimension of Time and the scales are not the same, use the larger scale and
convert the values of the operand with the smaller scale.
* If both operands have a dimension of Space and the scales are not the same, use the larger scale and
convert the values of the operand with the smaller scale.
* For addition and subtraction all dimensions for each of the operands and result are identical.
* For multiplication, the dimensions of the result are the sum of the dimensions of the operands.
* For division, the dimensions of the result are the difference of the dimensions of the operands.
Scale conversion involves division if the dimension is positive else multiplication if the dimension is
negative. If scale conversion is applied to either of the operands, the result is promoted to type
PM_TYPE_DOUBLE.
Putting all of this together in an example, consider the derived metric defined as follows:
x = network.interface.speed - delta(network.interface.in.bytes) / delta(sample.milliseconds)
The type, dimension and scale settings would propagate up the expression tree as follows.
┌─────────────────────────┬────────┬───────────────────┬────────────────────┐
│ Expression │ Type │ Dimension & Scale │ Scale Factor(s) │
├─────────────────────────┼────────┼───────────────────┼────────────────────┤
│ sample.milliseconds │ DOUBLE │ millisec │ │
│ delta(...) │ DOUBLE │ millisec │ │
│ network...bytes │ U64 │ byte │ │
│ delta(...) │ U64 │ byte │ │
│ delta(...) / delta(...) │ DOUBLE │ byte/millisec │ /1048576 and *1000 │
│ network...speed │ FLOAT │ Mbyte/sec │ │
│ x │ DOUBLE │ Mbyte/sec │ │
└─────────────────────────┴────────┴───────────────────┴────────────────────┘
Expressions involving single instance selection or the matchinst function must be associated with
underlying metrics that have an instance domain. These constructors make no sense for singular metrics.
Because semantic checking cannot be done at the time pmRegisterDerived is called, errors found during
semantic checking (when any subsequent calls to pmNewContext(3) or pmReconnectContext(3) succeed) are
reported using pmprintf(3). These include:
Error: derived metric <name1>: operand: <name2>: <reason>
There was a problem calling pmLookupName(3) to identify the operand metric <name2> used in the
definition of the derived metric <name1>.
Error: derived metric <name1>: operand (<name2> [<pmid2>]): <reason>
There was a problem calling pmLookupDesc(3) to identify the operand metric <name2> with PMID
<pmid2> used in the definition of the derived metric <name1>.
Semantic error: derived metric <name>: <operand> : <operand> Different <metadata> for ternary operands
For a ternary expression, the ``true'' operand and the ``false'' operand must have exactly the
same metadata, so type, semantics, instance domain, and units (dimension and scale).
Semantic error: derived metric <name>: <operand> <op> <operand>: Dimensions are not the same
Operands must have the same units (dimension and scale) for each of addition, subtraction, the
relational operators and the boolean ``and'' or ``or'' operators.
Semantic error: derived metric <name>: <operand> <op> <operand>: Illegal operator for counter and non-
counter
Only multiplication or division are allowed if the left operand has the semantics of a counter and
the right operand is not a counter.
Semantic error: derived metric <name>: <operand> <op> <operand>: Illegal operator for counters
If both operands have the semantics of counter, only addition or subtraction make sense, so
multiplication and division are not allowed.
Semantic error: derived metric <name>: <operand> <op> <operand>: Illegal operator for non-counter and
counter
Only multiplication is allowed if the right operand has the semantics of a counter and the left
operand is not a counter.
Semantic error: derived metric <metric> <expr> RESCALE <units>: Incompatible dimensions
The parameters <expr> and <units> to the rescale function must have the same dimension along the
axes of Time, Space and Count.
Semantic error: derived metric <name>: Incorrect time dimension for operand
Rate conversion using the rate() function is only possible for operand metrics with a Time
dimension of 0 or 1 (see pmLookupDesc(3)). If the operand metric's Time dimension is 0, then the
derived metrics has a value "per second" (Time dimension of -1). If the operand metric's Time
dimension is 1, then the derived metrics has a value of time utilization (Time dimension of 0).
Semantic error: derived metric <name>: <function>(<operand>): Non-arithmetic operand for function
The unary functions are only defined if the operand has arithmetic type. Similarly the first
argument to the rescale function must be of arithmetic type.
Semantic error: derived metric <name>: <expr> ? ...: Non-arithmetic operand for ternary guard
The first expression for a ternary operator must have an arithmetic type.
Semantic error: derived metric <name>: ... - ...: Non-arithmetic operand for unary negation
Unary negation only makes sense if the following expression has an arithmetic type.
Semantic error: derived metric <name>: <operand> <op> <operand>: Non-arithmetic type for <left-or-right>
operand
The binary arithmetic operators are only allowed with operands with an arithmetic type (integer of
various sizes and signedness, float or double).
Semantic error: derived metric <name>: <operand> <op> <operand>: Non-counter and not dimensionless <left-
or-right> operand
For multiplication or division or any of the relational operators, if one of the operands has the
semantics of a counter and the other has the semantics of a non-counter (instantaneous or
discrete) then the non-counter operand must have no units (dimension and scale).
Semantic error: derived metric <name>: <expr> ? <expr> : <expr>: Non-scalar ternary guard with scalar
expressions
If the ``true'' and ``false'' operands of a ternary expression have a scalar value, then the
``guard'' expression must also have a scalar value.
Semantic error: derived metric <name>: <expr> <op> <expr>: Operands should have the same instance domain
For all of the binary operators (arithmetic and relational), if both operands have non-scalar
values, then they must be defined over the same instance domain.
EXPRESSION EVALUATION
For the binary arithmetic operators, if either operand must be scaled (e.g. convert bytes to Kbytes) then
the result is promoted to PM_TYPE_DOUBLE. Otherwise the type of the result is determined by the types of
the operands, as per the following table which is evaluated from top to bottom until a match is found.
┌──────────────────────────────┬──────────┬────────────────┐
│ Operand Types │ Operator │ Result Type │
├──────────────────────────────┼──────────┼────────────────┤
│ either is PM_TYPE_DOUBLE │ any │ PM_TYPE_DOUBLE │
├──────────────────────────────┼──────────┼────────────────┤
│ any │ division │ PM_TYPE_DOUBLE │
├──────────────────────────────┼──────────┼────────────────┤
│ either is PM_TYPE_FLOAT │ any │ PM_TYPE_FLOAT │
├──────────────────────────────┼──────────┼────────────────┤
│ either is PM_TYPE_U64 │ any │ PM_TYPE_U64 │
├──────────────────────────────┼──────────┼────────────────┤
│ either is PM_TYPE_64 │ any │ PM_TYPE_64 │
├──────────────────────────────┼──────────┼────────────────┤
│ either is PM_TYPE_U32 │ any │ PM_TYPE_U32 │
├──────────────────────────────┼──────────┼────────────────┤
│ otherwise (both are │ any │ PM_TYPE_32 │
│ PM_TYPE_32) │ │ │
└──────────────────────────────┴──────────┴────────────────┘
CAVEATS
Derived metrics are not available when using pmFetchArchive(3) as this routine does not use a target list
of PMIDs that could be remapped (as is done for pmFetch(3)).
There is no pmUnregisterDerived method, so once registered a derived metric persists for the life of the
application.
DIAGNOSTICS
On success, pmRegisterDerived returns NULL.
If a syntactic error is found at the time of registration, the value returned by pmRegisterDerived is a
pointer into expr indicating where the error was found. To identify what the error was, the application
should call pmDerivedErrStr(3) to retrieve the corresponding parser error message.
pmRegisterDerivedMetric returns 0 and errmsg is undefined if the parsing is successful.
If the given expr does not conform to the required syntax pmRegisterDerivedMetric returns -1 and a
dynamically allocated error message string in errmsg. The error message is terminated with a newline and
includes both the input name and expr, along with an indicator of the position at which the error was
detected. e.g.
Error: pmRegisterDerivedMetric("my.disk.rates", ...) syntax error
4rat(disk.dev.read)
^
The position indicator line may be followed by an additional diagnostic line describing the nature of the
error, when available.
In the case of an error, the caller is responsible for calling free(3) to release the space allocated for
errmsg.
SEE ALSO
PCPIntro(1), free(3), PMAPI(3), pmDerivedErrStr(3), pmFetch(3), pmLoadDerivedConfig(3), pmNewContext(3),
pmprintf(3), pmReconnectContext(3) and PMNS(5).
Performance Co-Pilot PMREGISTERDERIVED(3)