Provided by: manpages-posix-dev_2013a-2_all 
PROLOG
This manual page is part of the POSIX Programmer's Manual. The Linux implementation of this interface
may differ (consult the corresponding Linux manual page for details of Linux behavior), or the interface
may not be implemented on Linux.
NAME
sigaction — examine and change a signal action
SYNOPSIS
#include <signal.h>
int sigaction(int sig, const struct sigaction *restrict act,
struct sigaction *restrict oact);
DESCRIPTION
The sigaction() function allows the calling process to examine and/or specify the action to be associated
with a specific signal. The argument sig specifies the signal; acceptable values are defined in
<signal.h>.
The structure sigaction, used to describe an action to be taken, is defined in the <signal.h> header to
include at least the following members:
┌─────────────────┬───────────────┬───────────────────────────────────────┐
│ Member Type │ Member Name │ Description │
├─────────────────┼───────────────┼───────────────────────────────────────┤
│ void(*) (int) │ sa_handler │Pointer to a signal-catching function │
│ │ │or one of the macros SIG_IGN or │
│ │ │SIG_DFL. │
│ sigset_t │ sa_mask │Additional set of signals to be │
│ │ │blocked during execution of signal- │
│ │ │catching function. │
│ int │ sa_flags │Special flags to affect behavior of │
│ │ │signal. │
│ void(*) (int, │ sa_sigaction │Pointer to a signal-catching function. │
│ siginfo_t *, │ │ │
│ void *) │ │ │
└─────────────────┴───────────────┴───────────────────────────────────────┘
The storage occupied by sa_handler and sa_sigaction may overlap, and a conforming application shall not
use both simultaneously.
If the argument act is not a null pointer, it points to a structure specifying the action to be
associated with the specified signal. If the argument oact is not a null pointer, the action previously
associated with the signal is stored in the location pointed to by the argument oact. If the argument
act is a null pointer, signal handling is unchanged; thus, the call can be used to enquire about the
current handling of a given signal. The SIGKILL and SIGSTOP signals shall not be added to the signal mask
using this mechanism; this restriction shall be enforced by the system without causing an error to be
indicated.
If the SA_SIGINFO flag (see below) is cleared in the sa_flags field of the sigaction structure, the
sa_handler field identifies the action to be associated with the specified signal. If the SA_SIGINFO
flag is set in the sa_flags field, the sa_sigaction field specifies a signal-catching function.
The sa_flags field can be used to modify the behavior of the specified signal.
The following flags, defined in the <signal.h> header, can be set in sa_flags:
SA_NOCLDSTOP Do not generate SIGCHLD when children stop or stopped children continue.
If sig is SIGCHLD and the SA_NOCLDSTOP flag is not set in sa_flags, and the implementation
supports the SIGCHLD signal, then a SIGCHLD signal shall be generated for the calling
process whenever any of its child processes stop and a SIGCHLD signal may be generated for
the calling process whenever any of its stopped child processes are continued. If sig is
SIGCHLD and the SA_NOCLDSTOP flag is set in sa_flags, then the implementation shall not
generate a SIGCHLD signal in this way.
SA_ONSTACK If set and an alternate signal stack has been declared with sigaltstack(), the signal shall
be delivered to the calling process on that stack. Otherwise, the signal shall be
delivered on the current stack.
SA_RESETHAND If set, the disposition of the signal shall be reset to SIG_DFL and the SA_SIGINFO flag
shall be cleared on entry to the signal handler.
Note: SIGILL and SIGTRAP cannot be automatically reset when delivered; the system
silently enforces this restriction.
Otherwise, the disposition of the signal shall not be modified on entry to the signal
handler.
In addition, if this flag is set, sigaction() may behave as if the SA_NODEFER flag were
also set.
SA_RESTART This flag affects the behavior of interruptible functions; that is, those specified to fail
with errno set to [EINTR]. If set, and a function specified as interruptible is
interrupted by this signal, the function shall restart and shall not fail with [EINTR]
unless otherwise specified. If an interruptible function which uses a timeout is restarted,
the duration of the timeout following the restart is set to an unspecified value that does
not exceed the original timeout value. If the flag is not set, interruptible functions
interrupted by this signal shall fail with errno set to [EINTR].
SA_SIGINFO If cleared and the signal is caught, the signal-catching function shall be entered as:
void func(int signo);
where signo is the only argument to the signal-catching function. In this case, the
application shall use the sa_handler member to describe the signal-catching function and
the application shall not modify the sa_sigaction member.
If SA_SIGINFO is set and the signal is caught, the signal-catching function shall be
entered as:
void func(int signo, siginfo_t *info, void *context);
where two additional arguments are passed to the signal-catching function. The second
argument shall point to an object of type siginfo_t explaining the reason why the signal
was generated; the third argument can be cast to a pointer to an object of type ucontext_t
to refer to the receiving thread's context that was interrupted when the signal was
delivered. In this case, the application shall use the sa_sigaction member to describe the
signal-catching function and the application shall not modify the sa_handler member.
The si_signo member contains the system-generated signal number.
The si_errno member may contain implementation-defined additional error information; if
non-zero, it contains an error number identifying the condition that caused the signal to
be generated.
The si_code member contains a code identifying the cause of the signal, as described in
Section 2.4.3, Signal Actions.
SA_NOCLDWAIT If set, and sig equals SIGCHLD, child processes of the calling processes shall not be
transformed into zombie processes when they terminate. If the calling process subsequently
waits for its children, and the process has no unwaited-for children that were transformed
into zombie processes, it shall block until all of its children terminate, and wait(),
waitid(), and waitpid() shall fail and set errno to [ECHILD]. Otherwise, terminating child
processes shall be transformed into zombie processes, unless SIGCHLD is set to SIG_IGN.
SA_NODEFER If set and sig is caught, sig shall not be added to the thread's signal mask on entry to
the signal handler unless it is included in sa_mask. Otherwise, sig shall always be added
to the thread's signal mask on entry to the signal handler.
When a signal is caught by a signal-catching function installed by sigaction(), a new signal mask is
calculated and installed for the duration of the signal-catching function (or until a call to either
sigprocmask() or sigsuspend() is made). This mask is formed by taking the union of the current signal
mask and the value of the sa_mask for the signal being delivered, and unless SA_NODEFER or SA_RESETHAND
is set, then including the signal being delivered. If and when the user's signal handler returns
normally, the original signal mask is restored.
Once an action is installed for a specific signal, it shall remain installed until another action is
explicitly requested (by another call to sigaction()), until the SA_RESETHAND flag causes resetting of
the handler, or until one of the exec functions is called.
If the previous action for sig had been established by signal(), the values of the fields returned in the
structure pointed to by oact are unspecified, and in particular oact->sa_handler is not necessarily the
same value passed to signal(). However, if a pointer to the same structure or a copy thereof is passed
to a subsequent call to sigaction() via the act argument, handling of the signal shall be as if the
original call to signal() were repeated.
If sigaction() fails, no new signal handler is installed.
It is unspecified whether an attempt to set the action for a signal that cannot be caught or ignored to
SIG_DFL is ignored or causes an error to be returned with errno set to [EINVAL].
If SA_SIGINFO is not set in sa_flags, then the disposition of subsequent occurrences of sig when it is
already pending is implementation-defined; the signal-catching function shall be invoked with a single
argument. If SA_SIGINFO is set in sa_flags, then subsequent occurrences of sig generated by sigqueue()
or as a result of any signal-generating function that supports the specification of an application-
defined value (when sig is already pending) shall be queued in FIFO order until delivered or accepted;
the signal-catching function shall be invoked with three arguments. The application specified value is
passed to the signal-catching function as the si_value member of the siginfo_t structure.
The result of the use of sigaction() and a sigwait() function concurrently within a process on the same
signal is unspecified.
RETURN VALUE
Upon successful completion, sigaction() shall return 0; otherwise, −1 shall be returned, errno shall be
set to indicate the error, and no new signal-catching function shall be installed.
ERRORS
The sigaction() function shall fail if:
EINVAL The sig argument is not a valid signal number or an attempt is made to catch a signal that cannot
be caught or ignore a signal that cannot be ignored.
ENOTSUP
The SA_SIGINFO bit flag is set in the sa_flags field of the sigaction structure.
The sigaction() function may fail if:
EINVAL An attempt was made to set the action to SIG_DFL for a signal that cannot be caught or ignored (or
both).
In addition, the sigaction() function may fail if the SA_SIGINFO flag is set in the sa_flags field of the
sigaction structure for a signal not in the range SIGRTMIN to SIGRTMAX.
The following sections are informative.
EXAMPLES
Establishing a Signal Handler
The following example demonstrates the use of sigaction() to establish a handler for the SIGINT signal.
#include <signal.h>
static void handler(int signum)
{
/* Take appropriate actions for signal delivery */
}
int main()
{
struct sigaction sa;
sa.sa_handler = handler;
sigemptyset(&sa.sa_mask);
sa.sa_flags = SA_RESTART; /* Restart functions if
interrupted by handler */
if (sigaction(SIGINT, &sa, NULL) == −1)
/* Handle error */;
/* Further code */
}
APPLICATION USAGE
The sigaction() function supersedes the signal() function, and should be used in preference. In
particular, sigaction() and signal() should not be used in the same process to control the same signal.
The behavior of async-signal-safe functions, as defined in their respective DESCRIPTION sections, is as
specified by this volume of POSIX.1‐2008, regardless of invocation from a signal-catching function. This
is the only intended meaning of the statement that async-signal-safe functions may be used in signal-
catching functions without restrictions. Applications must still consider all effects of such functions
on such things as data structures, files, and process state. In particular, application developers need
to consider the restrictions on interactions when interrupting sleep() and interactions among multiple
handles for a file description. The fact that any specific function is listed as async-signal-safe does
not necessarily mean that invocation of that function from a signal-catching function is recommended.
In order to prevent errors arising from interrupting non-async-signal-safe function calls, applications
should protect calls to these functions either by blocking the appropriate signals or through the use of
some programmatic semaphore (see semget(), sem_init(), sem_open(), and so on). Note in particular that
even the ``safe'' functions may modify errno; the signal-catching function, if not executing as an
independent thread, should save and restore its value in order to avoid the possibility that delivery of
a signal in between an error return from a function that sets errno and the subsequent examination of
errno could result in the signal-catching function changing the value of errno. Naturally, the same
principles apply to the async-signal-safety of application routines and asynchronous data access. Note
that longjmp() and siglongjmp() are not in the list of async-signal-safe functions. This is because the
code executing after longjmp() and siglongjmp() can call any unsafe functions with the same danger as
calling those unsafe functions directly from the signal handler. Applications that use longjmp() and
siglongjmp() from within signal handlers require rigorous protection in order to be portable. Many of the
other functions that are excluded from the list are traditionally implemented using either malloc() or
free() functions or the standard I/O library, both of which traditionally use data structures in a non-
async-signal-safe manner. Since any combination of different functions using a common data structure can
cause async-signal-safety problems, this volume of POSIX.1‐2008 does not define the behavior when any
unsafe function is called in a signal handler that interrupts an unsafe function.
Usually, the signal is executed on the stack that was in effect before the signal was delivered. An
alternate stack may be specified to receive a subset of the signals being caught.
When the signal handler returns, the receiving thread resumes execution at the point it was interrupted
unless the signal handler makes other arrangements. If longjmp() or _longjmp() is used to leave the
signal handler, then the signal mask must be explicitly restored.
This volume of POSIX.1‐2008 defines the third argument of a signal handling function when SA_SIGINFO is
set as a void * instead of a ucontext_t *, but without requiring type checking. New applications should
explicitly cast the third argument of the signal handling function to ucontext_t *.
The BSD optional four argument signal handling function is not supported by this volume of POSIX.1‐2008.
The BSD declaration would be:
void handler(int sig, int code, struct sigcontext *scp,
char *addr);
where sig is the signal number, code is additional information on certain signals, scp is a pointer to
the sigcontext structure, and addr is additional address information. Much the same information is
available in the objects pointed to by the second argument of the signal handler specified when
SA_SIGINFO is set.
Since the sigaction() function is allowed but not required to set SA_NODEFER when the application sets
the SA_RESETHAND flag, applications which depend on the SA_RESETHAND functionality for the newly
installed signal handler must always explicitly set SA_NODEFER when they set SA_RESETHAND in order to be
portable.
See also the rationale for Realtime Signal Generation and Delivery in the Rationale (Informative) volume
of POSIX.1‐2008, Section B.2.4.2, Signal Generation and Delivery.
RATIONALE
Although this volume of POSIX.1‐2008 requires that signals that cannot be ignored shall not be added to
the signal mask when a signal-catching function is entered, there is no explicit requirement that
subsequent calls to sigaction() reflect this in the information returned in the oact argument. In other
words, if SIGKILL is included in the sa_mask field of act, it is unspecified whether or not a subsequent
call to sigaction() returns with SIGKILL included in the sa_mask field of oact.
The SA_NOCLDSTOP flag, when supplied in the act->sa_flags parameter, allows overloading SIGCHLD with the
System V semantics that each SIGCLD signal indicates a single terminated child. Most conforming
applications that catch SIGCHLD are expected to install signal-catching functions that repeatedly call
the waitpid() function with the WNOHANG flag set, acting on each child for which status is returned,
until waitpid() returns zero. If stopped children are not of interest, the use of the SA_NOCLDSTOP flag
can prevent the overhead from invoking the signal-catching routine when they stop.
Some historical implementations also define other mechanisms for stopping processes, such as the ptrace()
function. These implementations usually do not generate a SIGCHLD signal when processes stop due to this
mechanism; however, that is beyond the scope of this volume of POSIX.1‐2008.
This volume of POSIX.1‐2008 requires that calls to sigaction() that supply a NULL act argument succeed,
even in the case of signals that cannot be caught or ignored (that is, SIGKILL or SIGSTOP). The System V
signal() and BSD sigvec() functions return [EINVAL] in these cases and, in this respect, their behavior
varies from sigaction().
This volume of POSIX.1‐2008 requires that sigaction() properly save and restore a signal action set up by
the ISO C standard signal() function. However, there is no guarantee that the reverse is true, nor could
there be given the greater amount of information conveyed by the sigaction structure. Because of this,
applications should avoid using both functions for the same signal in the same process. Since this cannot
always be avoided in case of general-purpose library routines, they should always be implemented with
sigaction().
It was intended that the signal() function should be implementable as a library routine using
sigaction().
The POSIX Realtime Extension extends the sigaction() function as specified by the POSIX.1‐1990 standard
to allow the application to request on a per-signal basis via an additional signal action flag that the
extra parameters, including the application-defined signal value, if any, be passed to the signal-
catching function.
FUTURE DIRECTIONS
None.
SEE ALSO
Section 2.4, Signal Concepts, exec, kill(), _longjmp(), longjmp(), pthread_sigmask(), raise(), semget(),
sem_init(), sem_open(), sigaddset(), sigaltstack(), sigdelset(), sigemptyset(), sigfillset(),
sigismember(), signal(), sigsuspend(), wait(), waitid()
The Base Definitions volume of POSIX.1‐2008, <signal.h>
COPYRIGHT
Portions of this text are reprinted and reproduced in electronic form from IEEE Std 1003.1, 2013 Edition,
Standard for Information Technology -- Portable Operating System Interface (POSIX), The Open Group Base
Specifications Issue 7, Copyright (C) 2013 by the Institute of Electrical and Electronics Engineers, Inc
and The Open Group. (This is POSIX.1-2008 with the 2013 Technical Corrigendum 1 applied.) In the event
of any discrepancy between this version and the original IEEE and The Open Group Standard, the original
IEEE and The Open Group Standard is the referee document. The original Standard can be obtained online at
http://www.unix.org/online.html .
Any typographical or formatting errors that appear in this page are most likely to have been introduced
during the conversion of the source files to man page format. To report such errors, see
https://www.kernel.org/doc/man-pages/reporting_bugs.html .
IEEE/The Open Group 2013 SIGACTION(3POSIX)