Provided by: freebsd-manpages_12.0-1_all 

NAME
mlx5ib — Mellanox ConnectX-4 and ConnectX-4 LX based 100Gb, 50Gb, 40Gb, 25Gb and 10Gb network adapter
driver
SYNOPSIS
To compile this driver into the kernel, place these lines in your kernel configuration file:
options COMPAT_LINUXKPI
device mlx5
device mlx5ib
To load the driver as a module at run-time, run this command as root:
kldload mlx5ib
To load the driver as a module at boot time, place this line in loader.conf(5):
mlx5ib_load="YES"
DESCRIPTION
The mlx5ib driver provides support for infiniband and Remote DMA over Converged Ethernet, RoCE, for PCI
Express network adapters based on ConnectX-4 and ConnectX-4 LX.
For further hardware information and questions related to hardware requirements, see
http://www.mellanox.com/.
For more information on configuring this device, see ifconfig(8).
HARDWARE
The mlx5ib driver supports 100Gb, 50Gb, 40Gb, 25Gb and 10Gb network adapters. ConnectX-4 supports:
10/20/25/40/50/56/100Gb/s speeds. ConnectX-4 LX supports: 10/25/40/50Gb/s speeds (and reduced power
consumption):
• Mellanox MCX455A-ECAT
• Mellanox MCX456A-ECAT
• Mellanox MCX415A-CCAT
• Mellanox MCX416A-CCAT
• Mellanox MCX455A-FCAT
• Mellanox MCX456A-FCAT
• Mellanox MCX415A-BCAT
• Mellanox MCX416A-BCAT
• Mellanox MCX4131A-GCAT
• Mellanox MCX4131A-BCAT
• Mellanox MCX4121A-ACAT
• Mellanox MCX4111A-ACAT
• Mellanox MCX4121A-XCAT
• Mellanox MCX4111A-XCAT
SUPPORT
For general information and support, go to the Mellanox support website at: http://www.mellanox.com/.
If an issue is identified with this driver with a supported adapter, email all the specific information
related to the issue to ⟨freebsd-drivers@mellanox.com⟩.
SEE ALSO
mlx5en(4), ifconfig(8)
HISTORY
The mlx5ib device driver first appeared in FreeBSD 12.x.
AUTHORS
The mlx5ib driver was written by Mellanox Technologies <freebsd-drivers@mellanox.com>.
Debian August 23, 2017 MLX5IB(4)