NAME

     uvscom — USB support for SUNTAC Slipper U VS-10U serial adapters driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel
     configuration file:

           device usb
           device ucom
           device uvscom

     Alternatively, to load the driver as a module at boot time, place the following line in
     loader.conf(5):

           uvscom_load="YES"

HARDWARE

     The uvscom driver supports the following adapters:

     •   DDI Pocket Air H" C@rd
     •   DDI Pocket Air H" C@rd 64
     •   NTT P-in
     •   NTT P-in m@ster

DESCRIPTION

     The uvscom driver provides support for the SUNTAC Slipper U VS-10U chip.  Slipper U is a PC
     Card to USB converter for data communication card adapters.

     The device is accessed through the ucom(4) driver which makes it behave like a tty(4).

FILES

     /dev/ttyU*       for callin ports
     /dev/ttyU*.init
     /dev/ttyU*.lock  corresponding callin initial-state and lock-state devices

     /dev/cuaU*       for callout ports
     /dev/cuaU*.init
     /dev/cuaU*.lock  corresponding callout initial-state and lock-state devices

SEE ALSO

     tty(4), ucom(4), usb(4)

HISTORY

     The uvscom driver first appeared in FreeBSD and later in NetBSD 1.6.  This manual page was
     adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002.