NAME

       cfdprc - CCSDS File Delivery Protocol management commands file

DESCRIPTION

       CFDP management commands are passed to cfdpadmin either in a file of text lines or interactively at
       cfdpadmin's command prompt (:).  Commands are interpreted line-by line, with exactly one command per
       line.  The formats and effects of the CFDP management commands are described below.

COMMANDS

       ?   The  help command.  This will display a listing of the commands and their formats.  It is the same as
           the h command.

       #   Comment line.  Lines beginning with # are not interpreted.

       e { 1 | 0 }
           Echo control.  Setting echo to 1 causes all output printed by cfdpadmin to be logged as well as  sent
           to stdout.  Setting echo to 0 disables this behavior.

       v   Version  number.   Prints out the version of ION currently installed.  HINT: combine with e 1 command
           to log the version number at startup.

       1   The initialize command.  Until this command is executed, CFDP is not in operation on  the  local  ION
           node and most cfdpadmin commands will fail.

       i   The  info  This  command  will  print  information  about the current state of the local CFDP entity,
           including the current settings of all parameters that can be managed as described below.

       s 'UTS command'
           The start command.  This command starts the UT-layer service task for the local CFDP entity.

       m discard { 0 | 1 }
           The manage discard command.  This command enables or disables the discarding  of  partially  received
           files upon cancellation of a file reception.

       m requirecrc { 0 | 1 }
           The  manage  CRC  data integrity command.  This command enables or disables the attachment of CRCs to
           all PDUs issued by the local CFDP entity.

       m fillchar file_fill_character
           The manage fill character command.  This command establishes  the  fill  character  to  use  for  the
           portions  of  an  incoming  file  that  have  not  yet been received.  The fill character is normally
           expressed in hex, e.g., 0xaa.

       m ckperiod check_cycle_period
           The manage check interval  command.   This  command  establishes  the  number  of  seconds  following
           reception  of  the EOF PDU -- or following expiration of a prior check cycle -- after which the local
           CFDP will check for completion of a file that is being received.

       m maxtimeouts check_cycle_limit
           The manage check limit command.  This command establishes the number of check cycle expirations after
           which the local CFDP entity will invoke the check cycle expiration fault handler upon expiration of a
           check cycle.

       m maxtrnbr max_transaction_number
           The manage transaction numbers command.  This command establishes the  largest  possible  transaction
           number  used by the local CFDP entity for file transmission transactions.  After this number has been
           used, the transaction number assigned to the next transaction will be 1.

       m segsize max_bytes_per_file_data_segment
           The manage segment size command.  This command establishes the number of bytes of file data  in  each
           file  data  PDU transmitted by the local CFDP entity in the absence of an application-supplied reader
           function.

       m inactivity inactivity_period
           The manage inactivity period command. This command establishes the number of seconds that a CFDP file
           transfer is allowed to go idle before being canceled for inactivity. The default is one day.

       x   The stop command.  This command stops the UT-layer service task for the local CFDP engine.

       w { 0 | 1  | <activity_spec> }
           The CFDP watch command.  This command enables and disables production of a continuous stream of user-
           selected CFDP activity indication characters.  A watch parameter of "1"  selects  all  CFDP  activity
           indication   characters;   "0"   de-selects  all  CFDP  activity  indication  characters;  any  other
           activity_spec such as "p" selects all activity indication characters in the string, de-selecting  all
           others.   CFDP  will  print  each  selected  activity  indication  character  to  stdout every time a
           processing event of the associated type occurs:

           p    CFDP PDU transmitted

           q    CFDP PDU received

       h   The help command.  This will display a listing of the commands and their formats.  It is the same  as
           the ? command.

EXAMPLES

       m requirecrc 1
           Initiates attachment of CRCs to all subsequently issued CFDP PDUs.

SEE ALSO

       cfdpadmin(1), bputa(1)

perl v5.24.1                                       2016-07-07                                          CFDPRC(5)