Provided by: dhcpy6d_0.4.3-1build1_all bug

NAME

       dhcpy6d.conf - configuration file for DHCPv6 server dhcpy6d

DESCRIPTION

       This  file contains the general settings for DHCPv6 server daemon dhcpy6d.  It follows RFC
       822 style parsed by Python ConfigParser module.  It contains several sections  which  will
       be discussed in detail here.

       An         online         documentation         is         also        available        at
       https://dhcpy6d.ifw-dresden.de/documentation/config/.

       Boolean settings can be done with 1/0, on/off or yes/no values.

       Some options allow multiple values. These have to be separated by spaces.

       There are 3 types of sections:

       [dhcpy6d]
              This section contains general options like interfaces, storage  and  logging.  Only
              one [dhcpy6d] section is allowed.

       [address_<address_name>]
              There  can  be  various  [address_<address_name>]  sections.  In  address  sections
              severall address ranges and types can be defind according to you needs.   Addresses
              are organized in classes. For details read further down.

       [class_<class_name>]
              Class  definitions  allow  to  apply  different  addresses,  time  limits et al. to
              different types of clients.

GENERAL CONFIGURATION IN SECTION [dhcpy6d]

       This section contains important general options. Values are  sometimes  examples  and  not
       meant to be used in production environments.

       really_do_it = yes | no
              Let  dhcpy6d  really_do_it  and  respond  to  client requests - might be of use for
              debugging and testing.

       interface = <interface> [<interface> ...]
              The interfaces the server listens on is defined with keyword  interface.   Multiple
              interfaces have to be separated by spaces.

       mcast = <multicast-address>
              The  multicast  address to listen at is ff02::1:2. Due to the facts that dhcpy6d at
              the moment works in local network segments only  and  to  the  restriction  of  MAC
              addresses only being usable there it will always have this value.

       port = <port>
              Exactly  the  same applies to the port dhcpy6d listens on. Default is 547. Probably
              senseless to change it but who knows.

       serverduid = <longlongserverduid>
              The server DUID should be configured with serverduid.  If  there  is  none  dhcpy6d
              creates  a  new  one at every startup.  Windows clients might run a little bit wild
              when server DUID changed. You are free to compose your own as long  as  it  follows
              RFC  3315. Please note that it has to be in hexadecimal format - no octals, no "-",
              just like in the example below.  The example here is a DUID-LLT (Link-layer Address
              Plus  Time)  even  if  it  should  be  a  DUID-TLL as timestamp comes first.  It is
              composed  of  DUID-type(LLT=1)  +  Hardware-type(Ethernet=1)  +  Unixtime-in-hex  +
              MAC-address   what   makes   a   0001   +   0001   +   11fb5dc9  +  01023472a6c5  =
              0001000111fb5dc901023472a6c5.

       server_preference = <0-255>
              The server_preference determines the priority of the server. The maximum  value  is
              255 which means highest priority.

       user = <user>
              For security reasons dhcpy6d can be run as non-root user.

       group = <group>
              For security reasons dhcpy6d can be run as non-root group.

       nameserver = <nameserver-address> [<nameserver-address> ...]
              Nameservers  to  be  replied  to request option 23 are defined with nameserver.  If
              more than one is needed they have to be separated by spaces.

       domain = <domaine-name>
              The domain to be used with FQDN hostnames for option 39.

       domain_search_list = <domainname> [<domainname> ...]
              Domain search lists to be used with option 24t. If  none  is  given  the  value  of
              domain above is used.  Multiple domains have to be separated by space or comma.

       log = yes | no
              Enable logging.

       log_console = yes | no
              Log to the console where dhcpy6d has been started.

       log_file = </path/to/dhcpy6d/log/file>
              Defines the file used for logging. Will be created if it does not yet exist.

       log_syslog = yes | no
              If logs should go to syslog it is set here.

       log_syslog_destination = syslogserver
              An  UDP  syslog  server  may  be  used  if  log_syslog_destination  points  to  it.
              Optionally a port other than default 514 can be set  when  adding  ":port"  to  the
              destination.

       log_syslog_facility = <log-facility>
              The default syslog facility is "daemon" but can be changed here.

       log_mac_llip = yes | no
              Log  discovered MAC/LLIP pairs of clients. Might be pretty verbose in larger setups
              and with disabled MAC/LLIP pair caching.

       store_config = file | sqlite | mysql | postgresql | none
              Configuration of clients can be stored in a  file  or  in  a  database.   Databases
              MySQL,  PostgreSQL and SQLite are supported at the moment, thus possible values are
              "file", "mysql", "postgresql"  or "sqlite".  To disable  any  client  configuration
              source it has to be "none".

       store_file_config = </path/to/client/conf/file>
              File     which     contains     the     clients     configuration.    Default    is
              /etc/dhcpy6d-clients.conf.  For details see dhcpy6d-clients.conf(5).

       store_sqlite_config = /path/to/sqlite/config/file
              SQLite database file which contains the clients configuration.

       store_volatile = sqlite | mysql | postgresql
              Volatile data like leases and the mapping between  Link  Local  Addresses  and  MAC
              addresses  can  be  stored in MySQL, PostgreSQL or SQLite database, so the possible
              values for store_volatile  are  "mysql",  "postgresql"  and  "sqlite".  Default  is
              /var/lib/dhcpy6d/volatile.sqlite.

       store_sqlite_volatile = /path/to/sqlite/volatile/file
              If set store_volatile is set to "sqlite" a SQLite database file must be defined.

       store_db_host = <database-host>

       store_db_db = <database-name>

       store_db_user = <database-user>

       store_db_password = <database-password>
              If store_config and/or store_volatile use a database to store information it has to
              be set with these self-explanatory options. The same database is  used  for  config
              and volatile data.

       cache_mac_llip = yes | no
              Cache  discovered  MAC/LLIP pairs in database. If enabled reduces response and open
              dhcpy6d to MAC/LLIP poisoning. If disabled might increase system load.

       identification = <mac> <duid> <hostname>
              Clients can be set to be identified by several attributes - MAC  address,  DUID  or
              hostname.  At  least one of mac, duid or hostname is necessary. Hostname is the one
              sent in client request with DHCPv6 option 39. Identification is  used  to  get  the
              correct  settings  for  the  client  from  config  file  or database.  Same MAC and
              different DUIDs might be interesting for clients with multiple OS.

       identification_mode = match_all | match_some
              If more than one identification attribute has been set, identification_mode can  be
              one  of  "match_all"  or  "match_some". The first means that all attributes have to
              match to identify a client and the latter is more tolerant.

       dns_update = yes | no
              Dynamically update DNS. This works at the moment only with Bind DNS, but  might  be
              extended to others, maybe via call of an external command.

       dns_update_nameserver = <nameserver-address> [<nameserver-address> ...]

       dns_rndc_key = <rndc-key_like_in_rndc.conf>

       dns_rndc_secret = <secret_key_like_in_rndc.conf>
              When  connecting  to a Bind DNS server its address and the necessary RNDC data must
              be set.

       dns_ignore_client = yes | no
              Clients may request that they update the DNS  record  theirself.  If  their  wishes
              shall be ignored this option has to be true.

       dns_use_client_hostname = yes | no
              The  client  hostname  either  comes from configuration of dhcpy6d or in the client
              request.

       preferred_lifetime = <seconds>

       valid_lifetime = <seconds>

       t1 = <seconds>

       t2 = <seconds>
              Preferred lifetime, valid lifetime, T1 and T2 in seconds are  configured  with  the
              corresponding options.

       information_refresh_time = <seconds>
              The  lifetime of information given to clients as response to an information-request
              message.

ADDRESS DEFINITIONS IN MULTIPLE [address_<address_name>] SECTIONS

       The <address_name> part of an [address_<address_name>] section is  an  arbitrarily  chosen
       identifier  like  "clients"  or  "invalid_clients".  There can be many address definitions
       which will be used by classes.  Every address definition may include several properties:

       category = mac | id | range | random
              Categories play an important role when defining patterns for addresses. An  address
              belongs to a certain category:

              mac - uses MAC address from client request as part of address

              id  -  uses  ID  given  to client in configuration file or database as one octet of
              address, should be in range 0-FFFF

              range - generate addresses of given ranges

              random - randomly created 64 bit values

       pattern = 2001:db8::$mac$|$id$|$range$|$random$
              Patterns allow to design the addresses according to their  category.  See  examples
              section below to make it more clear.

              $mac$  -  The MAC address from the DHCPv6 request's Link Local Address found in the
              neighbor cache will be inserted instead of the placeholder.  It will  be  stretched
              over 3 octets like 00:11:22:33:44:55 becomes 0011:2233:4455.

              $id$ - If clients get an ID in client configuration file or in client configuration
              database this ID will fill one octet.  Thus the ID  has  to  be  in  the  range  of
              0000-FFFF.

              $range$  -  If  address is of category range the range defined with extra keyword "
              range " will be used here in place of one octet.  This is why the  range  can  span
              from 0000-FFFF. Clients will get an address out of the given range.

              $random64$  -  A 64 bit random address will be generated in place of this variable.
              Clients get a random address just like they would if privacy extensions were  used.
              The random part will span over 4 octets.

       ia_type = na | ta
              IA  (Identity  Association)  types  can  be  one  of  non-temporary address "na" or
              temporary address "ta". Default and probably most used is "na".

       preferred_lifetime = <seconds>

       valid_lifetime = <seconds>
              As default preferred and valid lifetime are set in  general  settings,  but  it  is
              configurable individually for every address setting.

       dns_update = yes | no

       dns_zone = <dnszone>

       dns_rev_zone = <reverse_dnszone>
              If  these addresses should be synchronized with Bind DNS, these three settings have
              to be set accordingly.  The nameserver for updates is set in general settings.

   DEFAULT ADDRESS
       The address scheme used  for  the  default  class  "class_default"  is  by  default  named
       "address_default".   It  should  be  enough if address_default is defined, only if unknown
       clients should get extra nameservers etc. a class_default has to be set.

       [address_default]
              Address scheme used as default for clients which do not match any other class  than
              "class_default".

CLASS DEFINITIONS IN MULTIPLE [class_<class_name>] SECTIONS

       The  <class_name>  part  of  an  [class_<class_name>]  section  is  an  arbitrarily chosen
       identifier like "clients" or  "invalid_clients".   Clients  can  be  grouped  in  classes.
       Different  classes  can  have  different  properties, different address sets and different
       numbers of addresses.  Classes also might have different  name  servers,  time  intervals,
       filters and interfaces.

       A  client  gets  the  addresses,  nameserver  and  T1/T2  values  of the class which it is
       configured for in client configuration database or file.

       addresses = <address_name> [<address_name> ...]
              A class can contain as many addresses as needed. Their names have to  be  separated
              by spaces.

       answer = normal | noaddress | none
              Normally  a client will get an answer, but if for whatever reason is a need to give
              it an NoAddrAvail message back or completely ignore the client it can be set here.

       nameserver = <nameserver-address> [<nameserver-address> ...]
              Each class can have its own nameservers. If this option is  used  it  replaces  the
              nameservers from general settings.

       t1 = <seconds>

       t2 = <seconds>
              Each  class can have its own t1 and t2 values.  The ones from general settings will
              be overridden. Might be of use for some  invalid-but-about-to-become-valid-somehow-
              soon class.

       filter_hostname = <regular_expression>

       filter_mac = <regular_expression>

       filter_duid = <regular_expression>
              Filters  allow  to apply a class to a client not by configuration but by a matching
              regular expression filter.  Most useful might be the  filtering  by  hostname,  but
              maybe  there is some use for DUID and MAC address based filtering too.  The regular
              expressions   are    meant    to    by    Python    Regular    Expressions.     See
              https://docs.python.org/2/howto/regex.html and examples section below for details.

       interface = <interface> [<interface> ...]
              It  is  possible to let a class only apply on specific interfaces. These have to be
              separated by spaces.

   DEFAULT CLASS
       At the moment every client which does not match any other class by client configuration or
       filter  automatically matches the class "default".  This class could get an address scheme
       too.  It should be enough if address_default is defined, only if  unknown  clients  should
       get extra nameservers etc. a class_default has to be set.

       [class_default]
              Default  class  for  all clients that do not match any other class.  Like any other
              class it could contain all options that appyl to a class.

       [class_default_<interface>]
              If dhcpy6d listens at multiple interfaces, one can define a default class for every
              interface.

EXAMPLES

       The following paragraphs contain some hopefully helpful examples.

   1. MINIMAL CONFIGURATION
       Here  in  this  minimalistic example the server daemon listens on interface eth0.  It does
       not use any client configuration source  but  answers  requests  with  default  addresses.
       These  are  made  of the pattern fd01:db8:dead:bad:beef:$mac$ and result in addresses like
       fd01:db8:deaf:bad:beef:1020:3040:5060 if the MAC address  of  the  requesting  client  was
       10:20:30:40:50:60.

       [dhcpy6d]
       # Set to yes to really answer to clients.
       really_do_it = yes

       # Interface to listen to multicast ff02::1:2.
       interface = eth0

       # Some server DUID.
       serverduid = 0001000134824528134567366121

       # Do not identify and configure clients.
       store_config = none

       # SQLite DB for leases and LLIP-MAC-mapping.
       store_volatile = sqlite
       store_sqlite_volatile = volatile.sqlite

       # Special address type which applies to all not specially.
       # configured clients.
       [address_default]
       # Choosing MAC-based addresses.
       category = mac
       # ULA-type address pattern.
       pattern = fd01:db8:dead:bad:beef:$mac$

   2. CONFIGURATION WITH VALID AND UNKNOWN CLIENTS
       This  example  shows  some more complexity. Here only valid hosts will get a random global
       address from 2001:db8::/64.   Unknown  clients  get  a  default  ULA  range  address  from
       fc00::/7.

       [dhcpy6d]
       # Set to yes to really answer to clients.
       really_do_it = yes

       # Interface to listen to multicast ff02::1:2.
       interface = eth0

       # Server DUID - if not set there will be one generated every time dhcpy6d starts.
       # This might cause trouble for Windows clients because they go crazy about the
       # changed server DUID.
       serverduid = 0001000134824528134567366121

       # Non-privileged user/group.
       user = dhcpy6d
       group = dhcpy6d

       # Nameservers for option 23 - there can be several specified separated by spaces.
       nameserver = fd00:db8::53

       # Domain to be used for option 39 - host FQDN.
       domain = example.com

       # Domain search list for option 24 - domain search list.
       # If omited the value of option "domain" above is taken as default.
       domain_search_list = example.com

       # Do logging.
       log = yes
       # Log to console.
       log_console = no
       # Path to logfile.
       log_file = /var/log/dhcpy6d.log

       # Use SQLite for client configuration.
       store_config = sqlite

       # Use SQLite for volatile data.
       store_volatile = sqlite

       # Paths to SQLite database files.
       store_sqlite_config = config.sqlite
       store_sqlite_volatile = volatile.sqlite

       # Declare which attributes of a requesting client should be checked
       # to prove its identity. It is  possible to mix them, separated by spaces.
       identification = mac

       # Declare if all checked attributes have to match or is it enough if
       # some do. Kind of senseless with just one attribute.
       identification_mode = match_all

       # These lifetimes are also used as default for addresses which
       # have no extra defined lifetimes.
       preferred_lifetime = 43200
       valid_lifetime = 64800
       t1 = 21600
       t2 = 32400

       # ADDRESS DEFINITION

       # Addresses for proper valid clients.
       [address_valid_clients]
       # Better privacy for global addresses with category random.
       category = random
       # The following pattern will result in addresses like 2001:0db8::d3f6:834a:03d5:139c.
       pattern = 2001:db8::$random64$

       # Default addresses for unknown invalid clients.
       [address_default]
       # Unknown clients will get an internal ULA range-based address.
       category = range
       # The keyword "range" sets the range used in pattern.
       range = 1000-1FFF
       # This pattern results in addresses like fd00::1234.
       pattern = fd00::$range$

       # CLASS DEFINITION

       # Class for proper valid client.
       [class_valid_clients]
       # At least one of the above address schemes has to be set.
       addresses = valid_clients
       # Valid clients get a different nameserver.
       nameserver = 2001:db8::53

       # Default class for unknown hosts - only necessary here because of time interval settings.
       [class_default]
       addresses = default
       # Short interval of address refresh attempts so that a client's status
       # change will be reflected in IPv6 address soon.
       t1 = 600
       t2 = 900

   3. CONFIGURATION WITH 2 NETWORK SEGMENTS, SERVERS, VALID AND UNKNOWN CLIENTS
       This  example  uses  2 network segments, one for servers and one for clients. Servers here
       only get local ULA addresses.  Valid clients get 2 addresses, one local ULA and one global
       GUA  address.  This  feature  of  DHCPv6  is  at the moment only well supported by Windows
       clients. Unknown clients will get a local ULA address. Only valid clients and servers will
       get information about nameservers.

       [dhcpy6d]
       # Set to yes to really answer to clients.
       really_do_it = yes

       # Interfaces to listen to multicast ff02::1:2.
       # eth1 - client network
       # eth2 - server network
       interface = eth1 eth2

       # Server DUID - if not set there will be one generated every time dhcpy6d starts.
       # This might cause trouble for Windows clients because they go crazy about the
       # changed server DUID.
       serverduid = 0001000134824528134567366121

       # Non-privileged user/group.
       user = dhcpy6d
       group = dhcpy6d

       # Domain to be used for option 39 - host FQDN.
       domain = example.com

       # Domain search list for option 24 - domain search list.
       # If omited the value of option "domain" above is taken as default.
       domain_search_list = example.com

       # Do logging.
       log = yes
       # Log to console.
       log_console = no
       # Path to logfile.
       log_file = /var/log/dhcpy6d.log

       # Use MySQL for client configuration.
       store_config = mysql

       # Use MySQL for volatile data.
       store_volatile = mysql

       # Data used for MySQL storage.
       store_db_host = localhost
       store_db_db = dhcpy6d
       store_db_user = dhcpy6d
       store_db_password = dhcpy6d

       # Declare which attributes of a requesting client should be checked
       # to prove its identity. It is  possible to mix them, separated by spaces.
       identification = mac

       # Declare if all checked attributes have to match or is it enough if
       # some do. Kind of senseless with just one attribute.
       identification_mode = match_all

       # These lifetimes are also used as default for addresses which
       # have no extra defined lifetimes.
       preferred_lifetime = 43200
       valid_lifetime = 64800
       t1 = 21600
       t2 = 32400

       # ADDRESS DEFINITION

       # Global addresses for proper valid clients (GUA).
       [address_valid_clients_global]
       # Better privacy for global addresses with category random.
       category = random
       # The following pattern will result in addresses like 2001:0db8::d3f6:834a:03d5:139c.
       pattern = 2001:db8::$random64$

       # Local addresses for proper valid clients (ULA).
       [address_valid_clients_local]
       # Local addresses need no privacy, so they will be based of range.
       category = range
       range = 2000-2FFF
       # Valid clients will get local ULA addresses from fd01::/64.
       pattern = fd01::$range$

       # Servers in servers network will get local addresses based on IDs from client configuration.
       [address_servers]
       # IDs are set in client configuration database in range of 0-FFFF.
       category = id
       # Servers will get local ULA addresses from fd02::/64.
       pattern = fd02::$id$

       # Default addresses for unknown invalid clients
       [address_default]
       # Unknown clients will get an internal ULA range-based address.
       category = range
       # The keyword "range" sets the range used in pattern.
       range = 1000-1FFF
       # This pattern results in addresses like fd00::1234.
       pattern = fd00::$range$

       # CLASS DEFINITION

       # Class for proper valid client.
       [class_valid_clients]
       # Clients only exist in network linked with eth1.
       interface = eth1
       # Valid clients get 2 addresses, one local ULA and one global GUA
       # (only works reliably with Windows clients).
       addresses = valid_clients_global valid_clients_local
       # Only valid clients get a nameserver from server network.
       nameserver = fd02::53

       # Class for servers in network on eth2
       [class_servers]
       # Servers only exist in network linked with eth2.
       interface = eth2
       # Only local addresses for servers.
       addresses = servers
       # Nameserver from server network.
       nameserver = fd02::53

       # Default class for unknown hosts - only necessary here because of time interval settings
       [class_default]
       addresses = default
       # Short interval of address refresh attempts so that a client's status
       # change will be reflected in IPv6 address soon.
       t1 = 600
       t2 = 900

   4. CONFIGURATION WITH DYNAMIC DNS UPDATES
       In  this example the hostnames of valid clients will be registered in the Bind DNS server.
       The zones to be updated are configured for every address definition. Here only the  global
       GUA  addresses for valid clients will be updated in DNS.  The hostnames will be taken from
       client configuration data - the ones supplied by the clients are ignored.

       [dhcpy6d]
       # Set to yes to really answer to clients.
       really_do_it = yes

       # Interface to listen to multicast ff02::1:2.
       interface = eth0

       # Server DUID - if not set there will be one generated every time dhcpy6d starts.
       # This might cause trouble for Windows clients because they go crazy about the
       # changed server DUID.
       serverduid = 0001000134824528134567366121

       # Non-privileged user/group.
       user = dhcpy6d
       group = dhcpy6d

       # Nameservers for option 23 - there can be several specified separated by spaces.
       nameserver = fd00:db8::53

       # Domain to be used for option 39 - host FQDN.
       domain = example.com

       # Domain search list for option 24 - domain search list.
       # If omited the value of option "domain" above is taken as default.
       domain_search_list = example.com

       # This works at the moment only for ISC Bind nameservers.
       dns_update = yes

       # RNDC key name for DNS Update.
       dns_rndc_key = rndc-key

       # RNDC secret - mostly some MD5-hash. Take it from
       # nameservers' /etc/rndc.key.
       dns_rndc_secret = 0123456789012345679

       # Nameserver to talk to.
       dns_update_nameserver = ::1

       # Regarding RFC 4704 5. there are 3 kinds of client behaviour
       # for N O S bits:
       # - client wants to update DNS itself -> sends 0 0 0
       # - client wants server to update DNS -> sends 0 0 1
       # - client wants no server DNS update -> sends 1 0 0
       # Ignore client ideas about DNS (if at all, what name to use, self-updating...)
       # Here client hostname is taken from client configuration
       dns_ignore_client = yes

       # Do logging.
       log = yes
       # Log to console.
       log_console = no
       # Path to logfile.
       log_file = /var/log/dhcpy6d.log

       # Use SQLite for client configuration.
       store_config = sqlite

       # Use SQLite for volatile data.
       store_volatile = sqlite

       # Paths to SQLite database files.
       store_sqlite_config = config.sqlite
       store_sqlite_volatile = volatile.sqlite

       # Declare which attributes of a requesting client should be checked
       # to prove its identity. It is  possible to mix them, separated by spaces.
       identification = mac

       # ADDRESS DEFINITION

       # Addresses for proper valid clients.
       [address_valid_clients]
       # Better privacy for global addresses with category random.
       category = random
       # The following pattern will result in addresses like 2001:0db8::d3f6:834a:03d5:139c.
       pattern = 2001:db8::$random64$
       # Update these addresses in Bind DNS
       dns_update = yes
       # Zone to update.
       dns_zone = example.com
       # Reverse zone to update
       dns_rev_zone = 8.b.d.0.1.0.0.2.ip6.arpa

       # Default addresses for unknown invalid clients.
       [address_default]
       # Unknown clients will get an internal ULA range-based address.
       category = range
       # The keyword "range" sets the range used in pattern.
       range = 1000-1FFF
       # This pattern results in addresses like fd00::1234.
       pattern = fd00::$range$

       # CLASS DEFINITION

       # Class for proper valid client.
       [class_valid_clients]
       # At least one of the above address schemes has to be set.
       addresses = valid_clients
       # Valid clients get a different nameserver.
       nameserver = 2001:db8::53

   5. CONFIGURATION WITH FILTER
       In this example the membership of a  client  to  a  class  is  defined  by  a  filter  for
       hostnames.  All  Windows machines have win*-names here and when requesting an address this
       hostname gets filtered.

       [dhcpy6d]
       # Set to yes to really answer to clients.
       really_do_it = yes

       # Interface to listen to multicast ff02::1:2.
       interface = eth0

       # Server DUID - if not set there will be one generated every time dhcpy6d starts.
       # This might cause trouble for Windows clients because they go crazy about the
       # changed server DUID.
       serverduid = 0001000134824528134567366121

       # Use no client configuration.
       store_config = none

       # Use SQLite for volatile data.
       store_volatile = sqlite

       # Paths to SQLite database file.
       store_sqlite_volatile = volatile.sqlite

       # ADDRESS DEFINITION

       [address_local]
       category = range
       range = 1000-1FFF
       pattern = fd00::$range$

       [address_global]
       category = random
       pattern = 2001:638::$random64$

       # CLASS DEFINITION

       [class_windows]
       addresses = local
       # Python regular expressions to be used here
       filter_hostname = win.*

       [class_default]
       addresses = global

AUTHOR

       Copyright (C) 2012-2014 Henri Wahl <h.wahl@ifw-dresden.de>

LICENSE

       This program is free software; you can redistribute it and/or modify it under the terms of
       the  GNU  General  Public  License  as  published  by the Free Software Foundation; either
       version 2 of the License, or (at your option) any later version.

       This program is distributed in the hope that it will be useful, but WITHOUT ANY  WARRANTY;
       without  even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
       See the GNU General Public License for more details.

       You should have received a copy of the GNU General Public License along with this package;
       if  not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
       MA  02110-1301 USA

       On Debian systems, the full text of the GNU General Public License version 2 can be  found
       in the file `/usr/share/common-licenses/GPL-2'.

SEE ALSO

       dhcpy6d(8)
       dhcpy6d-clients.conf(5)
       https://dhcpy6d.ifw-dresden.de
       https://github.com/HenriWahl/dhcpy6d