Ubuntu Manpage: freeipmi.conf - specify default values to FreeIPMI

Provided by: freeipmi-common_1.6.4-3ubuntu1.1_all

NAME

       freeipmi.conf - specify default values to FreeIPMI

DESCRIPTION

       The  FreeIPMI  configuration  file  can  be  used  to set alternate default values to many
       FreeIPMI tools so values don't have to be configured on the  command  line.   This  allows
       users  to  avoid  typing  in  a  long  list of command line options everytime a command is
       executed. It  can  also  be  used  to  hide  usernames,  passwords,  and  other  sensitive
       information from the ps(1) command.

       Currently,  the  tools  that  can  be  configured  with  the  configuration file are: bmc-
       device(8), bmc-info(8),  bmc-watchdog(8),  ipmi-chassis(8),  ipmi-config(8),  ipmi-fru(8),
       ipmi-oem(8),  ipmi-pet(8),  ipmi-raw(8), ipmi-sel(8), ipmi-sensors(8), ipmiconsole(8), and
       ipmipower(8).

       By default, the configuration file is stored at /etc/freeipmi//freeipmi.conf.   But  users
       may  select  a  different  configuration  file  at the command line with the --config-file
       option.

       Values specified on the command line override the configuration values  specified  in  the
       configuration file.

FORMAT

       The  configuration  options  that  can  be  specified in the configuration file are listed
       below. Each configuration option must be listed on  a  separate  line.  Arguments  for  an
       option are separated by any amount of whitespace. Multiple arguments are also separated by
       whitespace.  Comments can be marked by using the pound sign ("#") character, and lines can
       be continued on the next using backslash ("\").

       Note  that  it  is possible to list the username, password and other potentially sensitive
       information in the configuration file. If this data is stored  in  a  configuration  file,
       system administrators should limit access to this file.

GENERAL OPTIONS

The following options are options generally available to all tools, although specific
options may be ignored by some. (For example, ipmiconsole(8) and ipmipower(8) do not
perform in-band communication, therefore they would ignore in-band communication options.
Similarly bmc-watchdog(8) does not perform out-of-band communication, therefore it would
ignore all out-of-band options).

driver-type IPMIDRIVER
Specify the default driver type to use.

disable-auto-probe ENABLE|DISABLE
Specify if IPMI devices should be probed for default settings.

driver-address DRIVER-ADDRESS
Specify the default in-band driver address to use.

driver-device DEVICE
Specify the default in-band driver device path to use.

target-channel-number CHANNEL-NUMBER
Specify the default in-band driver target channel number.

target-slave-address SLAVE-ADDRESS
Specify the default in-band driver target slave address.

username USERNAME
Specify the default username to use.

password PASSWORD
Specify the default password to use.

k_g str
Specify the default BMC key (K_g) to use. Prefix with '0x' to enter the key in hex.

session-timeout MILLISECONDS
Specify the default session timeout length to use in milliseconds.

retransmission-timeout MILLISECONDS
Specify the default retransmission timeout length to use in milliseconds.

authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use. The following authentication types
are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use. The following cipher suite ids are
supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use. The following privilege levels are
supported: USER, OPERATOR, ADMIN.

workaround-flags WORKAROUNDS
Specify default workaround flags to use. Multiple workarounds can be specified
separated by whitespace. Please see tool manpages for details about available
workarounds for each tool. The following workarounds are supported: assumeio,
spinpoll, idzero, forcepermsg, unexpectedauth, endianseq, noauthcodecheck, authcap,
nochecksumcheck, intel20, supermicro20, sun20, opensesspriv, integritycheckvalue,
assumemaxsdrrecordcount, solpayloadsize, solport, solstatus, solchannelsupport,
serialalertsdeferred, solpacketseq, skipchecks, assumesystemevent, discretereading,
ignorescanningdisabled, assumebmcowner, ignoreauthcode, slowcommit, veryslowcommit,
solchannelassumelanchannel, ignorestateflag, malformedack, guidformat, ipmiping.

SDR OPTIONS

       The following options are specific to tools that use the  sensor  data  repository  (SDR).
       They will be ignored by all other tools.

       quiet-cache ENABLE|DISABLE
              Specify if cache creation/deletion information should not be output by default.

       sdr-cache-directory DIRECTORY
              Specify the default sdr cache directory to use.

TIME OPTIONS

       The  following  options  are  specific  to tools that may output time values. They will be
       ignored by all other tools.

       utc-to-localtime ENABLE|DISABLE
              Specify if time should be converted from assumed UTC to localtime by default.

       localtime-to-utc ENABLE|DISABLE
              Specify if time should be converted from localtime to UTC by default.

       utc-offset-fR SECONDS
              Specify a default UTC offset to be added to timestamps.

HOSTRANGED OPTIONS

       The following options are specific to tools that support hostranged output. They  will  be
       ignored by all other tools.

       buffer-output ENABLE|DISABLE
              Specify if hostranged output should be buffered by default.

       consolidate-output ENABLE|DISABLE
              Specify if hostranged output should be consolidated by default.

       fanout COUNT
              Specify the default multiple host fanout to use.

       eliminate ENABLE|DISABLE
              Specify if undetected hosts should be eliminated by default.

       always-prefix ENABLE|DISABLE
              Specify if output should be always prefixed by default.

BMC-DEVICE OPTIONS

The following options are specific to bmc-device(8). They will be ignored by other tools.

bmc-device-username USERNAME
Specify the default username to use for bmc-device(8). If specified, will override
the general option username above.

bmc-device-password PASSWORD
Specify the default password to use for bmc-device(8). If specified, will override
the general option password above.

bmc-device-k_g str
Specify the default BMC key (K_g) to use for bmc-device(8). If specified, will
override the general option k_g above. Prefix with '0x' to enter the key in hex.

bmc-device-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for bmc-device(8). If specified,
will override the general option authentication-type above. The following
authentication types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

bmc-device-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for bmc-device(8). If specified, will
override the general option cipher-suite-id above. The following cipher suite ids
are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

bmc-device-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for bmc-device(8). If specified, will
override the general option privilege-level above. The following privilege levels
are supported: USER, OPERATOR, ADMIN.

bmc-device-workaround-flags WORKAROUNDS
Specify default workaround flags to use for bmc-device(8). If specified, will
override the general options workaround-flags above. Multiple workarounds can be
specified separated by whitespace. Please see bmc-device(8) manpage for available
workarounds.

BMC-INFO OPTIONS

The following options are specific to bmc-info(8). They will be ignored by other tools.

bmc-info-username USERNAME
Specify the default username to use for bmc-info(8). If specified, will override
the general option username above.

bmc-info-password PASSWORD
Specify the default password to use for bmc-info(8). If specified, will override
the general option password above.

bmc-info-k_g str
Specify the default BMC key (K_g) to use for bmc-info(8). If specified, will
override the general option k_g above. Prefix with '0x' to enter the key in hex.

bmc-info-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for bmc-info(8). If specified, will
override the general option authentication-type above. The following authentication
types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

bmc-info-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for bmc-info(8). If specified, will
override the general option cipher-suite-id above. The following cipher suite ids
are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

bmc-info-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for bmc-info(8). If specified, will
override the general option privilege-level above. The following privilege levels
are supported: USER, OPERATOR, ADMIN.

bmc-info-workaround-flags WORKAROUNDS
Specify default workaround flags to use for bmc-info(8). If specified, will
override the general options workaround-flags above. Multiple workarounds can be
specified separated by whitespace. Please see bmc-info(8) manpage for available
workarounds.

bmc-info-interpret-oem-data ENABLE|DISABLE
Specify if bmc-info should attempt to interpret OEM data by default or not.

BMC-WATCHDOG OPTIONS

       The  following  options  are  specific  to bmc-watchdog(8).  They will be ignored by other
       tools.

       bmc-watchdog-workaround-flags WORKAROUNDS
              Specify default workaround flags to use for bmc-watchdog(8).   If  specified,  will
              override  the  general  options workaround-flags above. Multiple workarounds can be
              specified  separated  by  whitespace.   Please  see  bmc-watchdog(8)  manpage   for
              available workarounds.

       bmc-watchdog-verbose-logging ENABLE|DISABLE
              Specify if logging will be verbose by default.

       bmc-watchdog-no-logging ENABLE|DISABLE
              Specify if logging will be disabled by default.

IPMI-CHASSIS OPTIONS

The following options are specific to ipmi-chassis(8). They will be ignored by other
tools.

ipmi-chassis-username USERNAME
Specify the default username to use for ipmi-chassis(8). If specified, will
override the general option username above.

ipmi-chassis-password PASSWORD
Specify the default password to use for ipmi-chassis(8). If specified, will
override the general option password above.

ipmi-chassis-k_g str
Specify the default BMC key (K_g) to use for ipmi-chassis(8). If specified, will
override the general option k_g above. Prefix with '0x' to enter the key in hex.

ipmi-chassis-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-chassis(8). If specified,
will override the general option authentication-type above. The following
authentication types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

ipmi-chassis-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-chassis(8). If specified, will
override the general option cipher-suite-id above. The following cipher suite ids
are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

ipmi-chassis-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-chassis(8). If specified, will
override the general option privilege-level above. The following privilege levels
are supported: USER, OPERATOR, ADMIN.

ipmi-chassis-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-chassis(8). If specified, will
override the general options workaround-flags above. Multiple workarounds can be
specified separated by whitespace. Please see ipmi-chassis(8) manpage for
available workarounds.

IPMI-CONFIG OPTIONS

The following options are specific to ipmi-config(8). They will be ignored by other
tools.

ipmi-config-username USERNAME
Specify the default username to use for ipmi-config(8). If specified, will
override the general option username above.

ipmi-config-password PASSWORD
Specify the default password to use for ipmi-config(8). If specified, will
override the general option password above.

ipmi-config-k_g str
Specify the default IPMI key (K_g) to use for ipmi-config(8). If specified, will
override the general option k_g above. Prefix with '0x' to enter the key in hex.

ipmi-config-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-config(8). If specified,
will override the general option authentication-type above. The following
authentication types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

ipmi-config-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-config(8). If specified, will
override the general option cipher-suite-id above. The following cipher suite ids
are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

ipmi-config-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-config(8). If specified, will
override the general option privilege-level above. The following privilege levels
are supported: USER, OPERATOR, ADMIN.

ipmi-config-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-config(8). If specified, will
override the general options workaround-flags above. Multiple workarounds can be
specified separated by whitespace. Please see ipmi-config(8) manpage for available
workarounds.

ipmi-config-verbose-count COUNT
Specify default verbose count to use for ipmi-config(8).

IPMI-DCMI OPTIONS

The following options are specific to ipmi-dcmi(8). They will be ignored by other tools.

ipmi-dcmi-username USERNAME
Specify the default username to use for ipmi-dcmi(8). If specified, will override
the general option username above.

ipmi-dcmi-password PASSWORD
Specify the default password to use for ipmi-dcmi(8). If specified, will override
the general option password above.

ipmi-dcmi-k_g str
Specify the default BMC key (K_g) to use for ipmi-dcmi(8). If specified, will
override the general option k_g above. Prefix with '0x' to enter the key in hex.

ipmi-dcmi-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-dcmi(8). If specified,
will override the general option authentication-type above. The following
authentication types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

ipmi-dcmi-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-dcmi(8). If specified, will
override the general option cipher-suite-id above. The following cipher suite ids
are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

ipmi-dcmi-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-dcmi(8). If specified, will
override the general option privilege-level above. The following privilege levels
are supported: USER, OPERATOR, ADMIN.

ipmi-dcmi-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-dcmi(8). If specified, will
override the general options workaround-flags above. Multiple workarounds can be
specified separated by whitespace. Please see ipmi-dcmi(8) manpage for available
workarounds.

ipmi-dcmi-interpret-oem-data ENABLE|DISABLE
Specify if ipmi-dcmi should attempt to interpret OEM data by default or not.

IPMI-FRU OPTIONS

The following options are specific to ipmi-fru(8). They will be ignored by other tools.

ipmi-fru-username USERNAME
Specify the default username to use for ipmi-fru(8). If specified, will override
the general option username above.

ipmi-fru-password PASSWORD
Specify the default password to use for ipmi-fru(8). If specified, will override
the general option password above.

ipmi-fru-k_g str
Specify the default BMC key (K_g) to use for ipmi-fru(8). If specified, will
override the general option k_g above. Prefix with '0x' to enter the key in hex.

ipmi-fru-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-fru(8). If specified, will
override the general option authentication-type above. The following authentication
types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

ipmi-fru-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-fru(8). If specified, will
override the general option cipher-suite-id above. The following cipher suite ids
are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

ipmi-fru-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-fru(8). If specified, will
override the general option privilege-level above. The following privilege levels
are supported: USER, OPERATOR, ADMIN.

ipmi-fru-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-fru(8). If specified, will
override the general options workaround-flags above. Multiple workarounds can be
specified separated by whitespace. Please see ipmi-fru(8) manpage for available
workarounds.

ipmi-fru-verbose-count COUNT
Specify default verbose count to use for ipmi-fru(8).

ipmi-fru-bridge-fru ENABLE|DISABLE
Specify if FRU entries on other controllers should be read by default or not.

ipmi-fru-interpret-oem-data ENABLE|DISABLE
Specify if ipmi-fru should attempt to interpret OEM data by default or not.

IPMI-OEM OPTIONS

The following options are specific to ipmi-oem(8). They will be ignored by other tools.

ipmi-oem-username USERNAME
Specify the default username to use for ipmi-oem(8). If specified, will override
the general option username above.

ipmi-oem-password PASSWORD
Specify the default password to use for ipmi-oem(8). If specified, will override
the general option password above.

ipmi-oem-k_g str
Specify the default BMC key (K_g) to use for ipmi-oem(8). If specified, will
override the general option k_g above. Prefix with '0x' to enter the key in hex.

ipmi-oem-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-oem(8). If specified, will
override the general option authentication-type above. The following authentication
types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

ipmi-oem-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-oem(8). If specified, will
override the general option cipher-suite-id above. The following cipher suite ids
are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

ipmi-oem-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-oem(8). If specified, will
override the general option privilege-level above. The following privilege levels
are supported: USER, OPERATOR, ADMIN.

ipmi-oem-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-oem(8). If specified, will
override the general options workaround-flags above. Multiple workarounds can be
specified separated by whitespace. Please see ipmi-oem(8) manpage for available
workarounds.

ipmi-oem-verbose-count COUNT
Specify default verbose count to use for ipmi-oem(8).

IPMI-PET OPTIONS

The following options are specific to ipmi-pet(8). They will be ignored by other tools.

ipmi-pet-username USERNAME
Specify the default username to use for ipmi-pet(8). If specified, will override
the general option username above.

ipmi-pet-password PASSWORD
Specify the default password to use for ipmi-pet(8). If specified, will override
the general option password above.

ipmi-pet-k_g str
Specify the default BMC key (K_g) to use for ipmi-pet(8). If specified, will
override the general option k_g above. Prefix with '0x' to enter the key in hex.

ipmi-pet-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-pet(8). If specified, will
override the general option authentication-type above. The following authentication
types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

ipmi-pet-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-pet(8). If specified, will
override the general option cipher-suite-id above. The following cipher suite ids
are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

ipmi-pet-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-pet(8). If specified, will
override the general option privilege-level above. The following privilege levels
are supported: USER, OPERATOR, ADMIN.

ipmi-pet-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-pet(8). If specified, will
override the general options workaround-flags above. Multiple workarounds can be
specified separated by whitespace. Please see ipmi-pet(8) manpage for available
workarounds.

ipmi-pet-verbose-count COUNT
Specify default verbose count to use for ipmi-pet(8).

ipmi-pet-output-event-severity ENABLE|DISABLE
Specify if ipmi-pet should output the event severity state by default.

ipmi-pet-output-event-state ENABLE|DISABLE
Specify if ipmi-pet should output the event state state by default.

ipmi-pet-event-state-config-file FILE
Specify the default event state configuration file.

ipmi-pet-interpret-oem-data ENABLE|DISABLE
Specify if ipmi-pet should attempt to interpret OEM data by default or not.

ipmi-pet-entity-sensor-names ENABLE|DISABLE
Specify if output of sensor names should include entity ids and instances by
default or not.

ipmi-pet-no-sensor-type-output ENABLE|DISABLE
Specify if output of the sensor type should be output by default or not.

ipmi-pet-comma-separated-output ENABLE|DISABLE
Specify if output should be comma separated by default or not.

ipmi-pet-no-header-output ENABLE|DISABLE
Specify if column headers should be output by default or not.

ipmi-pet-non-abbreviated-units ENABLE|DISABLE
Specify if output should have units abbreviated by default or not.

IPMI-RAW OPTIONS

The following options are specific to ipmi-raw(8). They will be ignored by other tools.

ipmi-raw-username USERNAME
Specify the default username to use for ipmi-raw(8). If specified, will override
the general option username above.

ipmi-raw-password PASSWORD
Specify the default password to use for ipmi-raw(8). If specified, will override
the general option password above.

ipmi-raw-k_g str
Specify the default BMC key (K_g) to use for ipmi-raw(8). If specified, will
override the general option k_g above. Prefix with '0x' to enter the key in hex.

ipmi-raw-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-raw(8). If specified, will
override the general option authentication-type above. The following authentication
types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

ipmi-raw-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-raw(8). If specified, will
override the general option cipher-suite-id above. The following cipher suite ids
are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

ipmi-raw-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-raw(8). If specified, will
override the general option privilege-level above. The following privilege levels
are supported: USER, OPERATOR, ADMIN.

ipmi-raw-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-raw(8). If specified, will
override the general options workaround-flags above. Multiple workarounds can be
specified separated by whitespace. Please see ipmi-raw(8) manpage for available
workarounds.

IPMI-SEL OPTIONS

The following options are specific to ipmi-sel(8). They will be ignored by other tools.

ipmi-sel-username USERNAME
Specify the default username to use for ipmi-sel(8). If specified, will override
the general option username above.

ipmi-sel-password PASSWORD
Specify the default password to use for ipmi-sel(8). If specified, will override
the general option password above.

ipmi-sel-k_g str
Specify the default BMC key (K_g) to use for ipmi-sel(8). If specified, will
override the general option k_g above. Prefix with '0x' to enter the key in hex.

ipmi-sel-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-sel(8). If specified, will
override the general option authentication-type above. The following authentication
types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

ipmi-sel-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-sel(8). If specified, will
override the general option cipher-suite-id above. The following cipher suite ids
are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

ipmi-sel-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-sel(8). If specified, will
override the general option privilege-level above. The following privilege levels
are supported: USER, OPERATOR, ADMIN.

ipmi-sel-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-sel(8). If specified, will
override the general options workaround-flags above. Multiple workarounds can be
specified separated by whitespace. Please see ipmi-sel(8) manpage for available
workarounds.

ipmi-sel-verbose-count COUNT
Specify default verbose count to use for ipmi-sel(8).

ipmi-sel-types TYPE-LIST
Specify default types to show SEL events for. Multiple types can be specified
separated by whitespace. Users may specify sensor types by string or by number
(decimal or hex). Please see ipmi-sel(8) --list-types option to see possible string
input types.

ipmi-sel-exclude-types ENSOR-TYPES-LIST Specify
default sensor types to not show SEL events for. Multiple sensor types can be
specified separated by whitespace. Users may specify sensor types by string or by
number. Please see ipmi-sel(8) --list-types option to see possible string input
types.

ipmi-sel-system-event-only ENABLE|DISABLE
Specify if output should only include system event records.

ipmi-sel-oem-event-only ENABLE|DISABLE
Specify if output should only include OEM event records.

ipmi-sel-output-manufacturer-id ENABLE|DISABLE
Specify if output of OEM event records should include manufacturer ID by default or
not.

ipmi-sel-output-event-state ENABLE|DISABLE
Specify if ipmi-sel should output the event state state by default.

ipmi-sel-event-state-config-file FILE
Specify the default event state configuration file.

ipmi-sel-interpret-oem-data ENABLE|DISABLE
Specify if ipmi-sel should attempt to interpret OEM data by default or not.

ipmi-sel-output-oem-event-strings ENABLE|DISABLE
Specify if ipmi-sel should output OEM event strings by default or not.

ipmi-sel-entity-sensor-names ENABLE|DISABLE
Specify if output of sensor names should include entity ids and instances by
default or not.

ipmi-sel-no-sensor-type-output ENABLE|DISABLE
Specify if output of the sensor type should be output by default or not.

ipmi-sel-comma-separated-output ENABLE|DISABLE
Specify if output should be comma separated by default or not.

ipmi-sel-no-header-output ENABLE|DISABLE
Specify if column headers should be output by default or not.

ipmi-sel-non-abbreviated-units ENABLE|DISABLE
Specify if output should have units abbreviated by default or not.

ipmi-sel-legacy-output ENABLE|DISABLE
Specify if output should be in legacy format by default or not.

IPMI-SENSORS OPTIONS

The following options are specific to ipmi-sensors(8). They will be ignored by other
tools.

ipmi-sensors-username USERNAME
Specify the default username to use for ipmi-sensors(8). If specified, will
override the general option username above.

ipmi-sensors-password PASSWORD
Specify the default password to use for ipmi-sensors(8). If specified, will
override the general option password above.

ipmi-sensors-k_g str
Specify the default BMC key (K_g) to use for ipmi-sensors(8). If specified, will
override the general option k_g above. Prefix with '0x' to enter the key in hex.

ipmi-sensors-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-sensors(8). If specified,
will override the general option authentication-type above. The following
authentication types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

ipmi-sensors-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-sensors(8). If specified, will
override the general option cipher-suite-id above. The following cipher suite ids
are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

ipmi-sensors-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-sensors(8). If specified, will
override the general option privilege-level above. The following privilege levels
are supported: USER, OPERATOR, ADMIN.

ipmi-sensors-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-sensors(8). If specified, will
override the general options workaround-flags above. Multiple workarounds can be
specified separated by whitespace. Please see ipmi-sensors(8) manpage for
available workarounds.

ipmi-sensors-verbose-count COUNT
Specify default verbose count to use for ipmi-sensors(8).

ipmi-sensors-quiet-readings ENABLE|DISABLE
Specify if sensor reading values and thresholds should not be output by default.

ipmi-sensors-record-ids ECORD-IDS-LIST
Specify default record ids to show sensor outputs for. Multiple record ids can be
specified separated by whitespace.

ipmi-sensors-exclude-record-ids ECORD-IDS-LIST
Specify default record ids to not show sensor outputs for. Multiple record ids can
be specified separated by whitespace.

ipmi-sensors-types TYPE-LIST
Specify default types to show sensor outputs for. Multiple types can be specified
separated by whitespace. Users may specify sensor types by string or by number
(decimal or hex). Please see ipmi-sensors(8) --list-types option to see possible
string input types.

ipmi-sensors-exclude-types ENSOR-TYPES-LIST Specify
default sensor types to not show sensor outputs for. Multiple sensor types can be
specified separated by whitespace. Users may specify sensor types by string or by
number. Please see ipmi-sensors(8) --list-types option to see possible string input
types.

ipmi-sensors-bridge-sensors ENABLE|DISABLE
Specify if non-BMC sensors should be bridged by default or not.

ipmi-sensors-shared-sensors ENABLE|DISABLE
Specify if shared sensors should be output by default or not.

ipmi-sensors-interpret-oem-data ENABLE|DISABLE
Specify if ipmi-sensors should attempt to interpret OEM data by default or not.

ipmi-sensors-ignore-not-available-sensors ENABLE|DISABLE
Specify if ipmi-sensors should ignore not-available (i.e. N/A) sensors by default.

ipmi-sensors-ignore-unrecognized-events ENABLE|DISABLE
Specify if ipmi-sensors should ignore unrecognized events (i.e. 'Unrecognized
Event') in sensors output by default.

ipmi-sensors-output-event-bitmask ENABLE|DISABLE
Specify if ipmi-sensors should output event bitmasks instead of string
representations by default.

ipmi-sensors-output-sensor-state ENABLE|DISABLE
Specify if ipmi-sensors should output the sensor state by default.

ipmi-sensors-sensor-state-config-file FILE
Specify the default sensor state configuration file.

ipmi-sensors-entity-sensor-names ENABLE|DISABLE
Specify if output of sensor names should include entity ids and instances by
default or not.

ipmi-sensors-output-sensor-thresholds ENABLE|DISABLE
Specify if ipmi-sensors should output sensor thresholds by default.

ipmi-sensors-no-sensor-type-output ENABLE|DISABLE
Specify if output of the sensor type should be output by default or not.

ipmi-sensors-comma-separated-output ENABLE|DISABLE
Specify if output should be comma separated by default or not.

ipmi-sensors-no-header-output ENABLE|DISABLE
Specify if column headers should be output by default or not.

ipmi-sensors-non-abbreviated-units ENABLE|DISABLE
Specify if output should have units abbreviated by default or not.

ipmi-sensors-legacy-output ENABLE|DISABLE
Specify if output should be in legacy format by default or not.

ipmi-sensors-ipmimonitoring-legacy-output ENABLE|DISABLE
Specify if output should be in ipmimonitoring legacy format by default or not.

IPMICONSOLE OPTIONS

The following options are specific to ipmiconsole(8). They will be ignored by other
tools.

ipmiconsole-username USERNAME
Specify the default username to use for ipmiconsole(8). If specified, will
override the general option username above.

ipmiconsole-password PASSWORD
Specify the default password to use for ipmiconsole(8). If specified, will
override the general option password above.

ipmiconsole-k_g str
Specify the default BMC key (K_g) to use for ipmiconsole(8). If specified, will
override the general option k_g above. Prefix with '0x' to enter the key in hex.

ipmiconsole-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmiconsole(8). If specified,
will override the general option authentication-type above. The following
authentication types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

ipmiconsole-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmiconsole(8). If specified, will
override the general option cipher-suite-id above. The following cipher suite ids
are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

ipmiconsole-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmiconsole(8). If specified, will
override the general option privilege-level above. The following privilege levels
are supported: USER, OPERATOR, ADMIN.

ipmiconsole-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmiconsole(8). If specified, will
override the general options workaround-flags above. Multiple workarounds can be
specified separated by whitespace. Please see ipmiconsole(8) manpage for available
workarounds.

ipmiconsole-escape-char CHAR
Specify the default escape character.

ipmiconsole-dont-steal ENABLE|DISABLE
Specify if in use SOL sessions should not be stolen by default.

ipmiconsole-serial-keepalive ENABLE|DISABLE
Specify if serial keepalive should be enabled by default.

ipmiconsole-serial-keepalive-empty ENABLE|DISABLE
Specify if serial keepalive empty should be enabled by default.

ipmiconsole-sol-payload-instance NUM
Specify the default SOL payload instance.

ipmiconsole-deactivate-all-instances ENABLE|DISABLE
Specify if SOL deactivate should deactivate all instances by default.

ipmiconsole-lock-memory ENABLE|DISABLE
Specify if memory should be locked by default.

IPMIPOWER OPTIONS

The following options are specific to ipmipower(8). They will be ignored by other tools.

ipmipower-username USERNAME
Specify the default username to use for ipmipower(8). If specified, will override
the general option username above.

ipmipower-password PASSWORD
Specify the default password to use for ipmipower(8). If specified, will override
the general option password above.

ipmipower-k_g str
Specify the default BMC key (K_g) to use for ipmipower(8). If specified, will
override the general option k_g above. Prefix with '0x' to enter the key in hex.

ipmipower-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmipower(8). If specified,
will override the general option authentication-type above. The following
authentication types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

ipmipower-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmipower(8). If specified, will
override the general option cipher-suite-id above. The following cipher suite ids
are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.

ipmipower-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmipower(8). If specified, will
override the general option privilege-level above. The following privilege levels
are supported: USER, OPERATOR, ADMIN.

ipmipower-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmipower(8). If specified, will
override the general options workaround-flags above. Multiple workarounds can be
specified separated by whitespace. Please see ipmipower(8) manpage for available
workarounds.

ipmipower-on-if-off ENABLE|DISABLE
Specify if on-if-off functionality is enabled or disabled by default.

ipmipower-wait-until-on ENABLE|DISABLE
Specify if wait-until-on functionality is enabled or disabled by default.

ipmipower-wait-until-off ENABLE|DISABLE
Specify if wait-until-off functionality is enabled or disabled by default.

ipmipower-oem-power-type OEM-POWER-TYPE
Specify OEM power type to be used.

ipmipower-retransmission-wait-timeout MILLISECONDS
Specify the default retransmission wait timeout length to use in milliseconds.

ipmipower-retransmission-backoff-count COUNT
Specify the default retransmission backoff count to use for retransmissions.

ipmipower-ping-interval MILLISECONDS
Specify the default ping interval length to use in milliseconds.

ipmipower-ping-timeout MILLISECONDS
Specify the default ping timeout length to use in milliseconds.

ipmipower-ping-packet-count COUNT
Specify the default ping packet count size to use.

ipmipower-ping-percent PERCENT
Specify the default ping percent value to use.

ipmipower-ping-consec-count COUNT
Specify the default ping consecutive count value to use.

FILES

       /etc/freeipmi//freeipmi.conf

REPORTING BUGS

       Report bugs to <freeipmi-users@gnu.org> or <freeipmi-devel@gnu.org>.

COPYRIGHT

       Copyright © 2003-2015 FreeIPMI Core Team.

       FreeIPMI is free software; you can redistribute it and/or modify it under the terms of the
       GNU General Public License as published by the Free Software Foundation; either version  3
       of the License, or (at your option) any later version.