Provided by: libnftables1_0.9.3-2_amd64 bug

NAME

       libnftables-json - Supported JSON schema by libnftables

SYNOPSIS

       { "nftables": [ OBJECTS ] }

       OBJECTS := LIST_OBJECTS | CMD_OBJECTS

       LIST_OBJECTS := LIST_OBJECT [ , LIST_OBJECTS ]

       CMD_OBJECTS := CMD_OBJECT [ , CMD_OBJECTS ]

       CMD_OBJECT := { CMD: LIST_OBJECT } | METAINFO_OBJECT

       CMD := "add" | "replace" | "create" | "insert" | "delete" | "list" | "reset" | "flush" |
       "rename"

       LIST_OBJECT := TABLE | CHAIN | RULE | SET | MAP | ELEMENT | FLOWTABLE | COUNTER | QUOTA |
       CT_HELPER | LIMIT | METAINFO_OBJECT | CT_TIMEOUT | CT_EXPECTATION

DESCRIPTION

       libnftables supports JSON formatted input and output. This is implemented as an
       alternative frontend to the standard CLI syntax parser, therefore basic behaviour is
       identical and, for (almost) any operation available in standard syntax, there should be an
       equivalent one in JSON.

       JSON input may be provided in a single string as parameter to nft_run_cmd_from_buffer() or
       in a file identified by the filename parameter of the nft_run_cmd_from_filename()
       function.

       JSON output has to be enabled via the nft_ctx_output_set_json() function, turning library
       standard output into JSON format. Error output remains unaffected.

GLOBAL STRUCTURE

       In general, any JSON input or output is enclosed in an object with a single property named
       nftables. Its value is an array containing commands (for input) or ruleset elements (for
       output).

       A command is an object with a single property whose name identifies the command. Its value
       is a ruleset element - basically identical to output elements, apart from certain
       properties which may be interpreted differently or are required when output generally
       omits them.

METAINFO OBJECT

       In output, the first object in an nftables array is a special one containing library
       information. Its content is as follows:

           { "metainfo": {
                   "version": STRING,
                   "release_name": STRING,
                   "json_schema_version": NUMBER
           }}

       The values of version and release_name properties are equal to the package version and
       release name as printed by nft -v. The value of the json_schema_version property is an
       integer indicating the schema version.

       If supplied in library input, the parser will verify the json_schema_version value to not
       exceed the internally hardcoded one (to make sure the given schema is fully understood).
       In future, a lower number than the internal one may activate compatibility mode to parse
       outdated and incompatible JSON input.

COMMAND OBJECTS

       The structure accepts an arbitrary amount of commands which are interpreted in order of
       appearance. For instance, the following standard syntax input:

           flush ruleset
           add table inet mytable
           add chain inet mytable mychain
           add rule inet mytable mychain tcp dport 22 accept

       translates into JSON as such:

           { "nftables": [
                   { "flush": { "ruleset": null }},
                   { "add": { "table": {
                                   "family": "inet",
                                   "name": "mytable"
                   }}},
                   { "add": { "chain": {
                                   "family": "inet",
                                   "table": "mytable",
                                   "chain": "mychain"
                   }}}
                   { "add": { "rule": {
                                   "family": "inet",
                                   "table": "mytable",
                                   "chain": "mychain",
                                   "expr": [
                                           { "match": {
                                                   "left": { "payload": {
                                                                   "protocol": "tcp",
                                                                   "field": "dport"
                                                   }},
                                                   "right": 22
                                           }},
                                           { "accept": null }
                                   ]
                   }}}
           ]}

   ADD
           { "add": ADD_OBJECT }

           ADD_OBJECT := TABLE | CHAIN | RULE | SET | MAP | ELEMENT |
                           FLOWTABLE | COUNTER | QUOTA | CT_HELPER | LIMIT |
                           CT_TIMEOUT | CT_EXPECTATION

       Add a new ruleset element to the kernel.

   REPLACE
           { "replace": RULE }

       Replace a rule. In RULE, the handle property is mandatory and identifies the rule to be
       replaced.

   CREATE
           { "create": ADD_OBJECT }

       Identical to add command, but returns an error if the object already exists.

   INSERT
           { "insert": RULE }

       This command is identical to add for rules, but instead of appending the rule to the chain
       by default, it inserts at first position. If a handle or index property is given, the rule
       is inserted before the rule identified by those properties.

   DELETE
           { "delete": ADD_OBJECT }

       Delete an object from the ruleset. Only the minimal number of properties required to
       uniquely identify an object is generally needed in ADD_OBJECT. For most ruleset elements,
       this is family and table plus either handle or name (except rules since they don’t have a
       name).

   LIST
           { "list": LIST_OBJECT }

           LIST_OBJECT := TABLE | TABLES | CHAIN | CHAINS | SET | SETS |
                            MAP | MAPS | COUNTER | COUNTERS | QUOTA | QUOTAS |
                            CT_HELPER | CT_HELPERS | LIMIT | LIMITS | RULESET |
                            METER | METERS | FLOWTABLE | FLOWTABLES |
                            CT_TIMEOUT | CT_EXPECTATION

       List ruleset elements. The plural forms are used to list all objects of that kind,
       optionally filtered by family and for some, also table.

   RESET
           { "reset": RESET_OBJECT }

           RESET_OBJECT := COUNTER | COUNTERS | QUOTA | QUOTAS

       Reset state in suitable objects, i.e. zero their internal counter.

   FLUSH
           { "flush": FLUSH_OBJECT }

           FLUSH_OBJECT := TABLE | CHAIN | SET | MAP | METER | RULESET

       Empty contents in given object, e.g. remove all chains from given table or remove all
       elements from given set.

   RENAME
           { "rename": CHAIN }

       Rename a chain. The new name is expected in a dedicated property named newname.

RULESET ELEMENTS

   TABLE
           { "table": {
                   "family": STRING,
                   "name": STRING,
                   "handle": NUMBER
           }}

       This object describes a table.

       family
           The table’s family, e.g.  "ip" or "ip6".

       name
           The table’s name.

       handle
           The table’s handle. In input, it is used only in delete command as alternative to
           name.

   CHAIN
           { "chain": {
                   "family": STRING,
                   "table": STRING,
                   "name": STRING,
                   "newname": STRING,
                   "handle": NUMBER,
                   "type": STRING,
                   "hook": STRING,
                   "prio": NUMBER,
                   "dev": STRING,
                   "policy": STRING
           }}

       This object describes a chain.

       family
           The table’s family.

       table
           The table’s name.

       name
           The chain’s name.

       handle
           The chain’s handle. In input, it is used only in delete command as alternative to
           name.

       newname
           A new name for the chain, only relevant in the rename command.

       The following properties are required for base chains:

       type
           The chain’s type.

       hook
           The chain’s hook.

       prio
           The chain’s priority.

       dev
           The chain’s bound interface (if in the netdev family).

       policy
           The chain’s policy.

   RULE
           { "rule": {
                   "family": STRING,
                   "table": STRING,
                   "chain": STRING,
                   "expr": [ STATEMENTS ],
                   "handle": NUMBER,
                   "index": NUMBER,
                   "comment": STRING
           }}

           STATEMENTS := STATEMENT [, STATEMENTS ]

       This object describes a rule. Basic building blocks of rules are statements. Each rule
       consists of at least one.

       family
           The table’s family.

       table
           The table’s name.

       chain
           The chain’s name.

       expr
           An array of statements this rule consists of. In input, it is used in
           add/insert/replace commands only.

       handle
           The rule’s handle. In delete/replace commands, it serves as an identifier of the rule
           to delete/replace. In add/insert commands, it serves as an identifier of an existing
           rule to append/prepend the rule to.

       index
           The rule’s position for add/insert commands. It is used as an alternative to handle
           then.

       comment
           Optional rule comment.

   SET / MAP
           { "set": {
                   "family": STRING,
                   "table": STRING,
                   "name": STRING,
                   "handle": NUMBER,
                   "type": SET_TYPE,
                   "policy": SET_POLICY,
                   "flags": [ SET_FLAG_LIST ],
                   "elem": SET_ELEMENTS,
                   "timeout": NUMBER,
                   "gc-interval": NUMBER,
                   "size": NUMBER
           }}

           { "map": {
                   "family": STRING,
                   "table": STRING,
                   "name": STRING,
                   "handle": NUMBER,
                   "type": SET_TYPE,
                   "map": STRING,
                   "policy": SET_POLICY,
                   "flags": [ SET_FLAG_LIST ],
                   "elem": SET_ELEMENTS,
                   "timeout": NUMBER,
                   "gc-interval": NUMBER,
                   "size": NUMBER
           }}

           SET_TYPE := STRING | [ SET_TYPE_LIST ]
           SET_TYPE_LIST := STRING [, SET_TYPE_LIST ]
           SET_POLICY := "performance" | "memory"
           SET_FLAG_LIST := SET_FLAG [, SET_FLAG_LIST ]
           SET_FLAG := "constant" | "interval" | "timeout"
           SET_ELEMENTS := EXPRESSION | [ EXPRESSION_LIST ]
           EXPRESSION_LIST := EXPRESSION [, EXPRESSION_LIST ]

       These objects describe a named set or map. Maps are a special form of sets in that they
       translate a unique key to a value.

       family
           The table’s family.

       table
           The table’s name.

       name
           The set’s name.

       handle
           The set’s handle. For input, it is used in the delete command only.

       type
           The set’s datatype, see below.

       map
           Type of values this set maps to (i.e. this set is a map).

       policy
           The set’s policy.

       flags
           The set’s flags.

       elem
           Initial set element(s), see below.

       timeout
           Element timeout in seconds.

       gc-interval
           Garbage collector interval in seconds.

       size
           Maximum number of elements supported.

       TYPE
           The set type might be a string, such as "ipv4_addr" or an array consisting of strings
           (for concatenated types).

       ELEM
           A single set element might be given as string, integer or boolean value for simple
           cases. If additional properties are required, a formal elem object may be used.

           Multiple elements may be given in an array.

   ELEMENT
           { "element": {
                   "family": STRING,
                   "table": STRING,
                   "name": STRING,
                   "elem": SET_ELEM
           }}

           SET_ELEM := EXPRESSION | [ EXPRESSION_LIST ]
           EXPRESSION_LIST := EXPRESSION [, EXPRESSION ]

       Manipulate element(s) in a named set.

       family
           The table’s family.

       table
           The table’s name.

       name
           The set’s name.

       elem
           See elem property of set object.

   FLOWTABLE
           { "flowtable": {
                   "family": STRING,
                   "table": STRING,
                   "name": STRING,
                   "handle": NUMBER,
                   "hook": STRING,
                   "prio": NUMBER,
                   "dev": FT_INTERFACE
           }}

           FT_INTERFACE := STRING | [ FT_INTERFACE_LIST ]
           FT_INTERFACE_LIST := STRING [, STRING ]

       This object represents a named flowtable.

       family
           The table’s family.

       table
           The table’s name.

       name
           The flow table’s name.

       handle
           The flow table’s handle. In input, it is used by the delete command only.

       hook
           The flow table’s hook.

       prio
           The flow table’s priority.

       dev
           The flow table’s interface(s).

   COUNTER
           { "counter": {
                   "family": STRING,
                   "table": STRING,
                   "name": STRING,
                   "handle": NUMBER,
                   "packets": NUMBER,
                   "bytes": NUMBER
           }}

       This object represents a named counter.

       family
           The table’s family.

       table
           The table’s name.

       name
           The counter’s name.

       handle
           The counter’s handle. In input, it is used by the delete command only.

       packets
           Packet counter value.

       bytes
           Byte counter value.

   QUOTA
           { "quota": {
                   "family": STRING,
                   "table": STRING,
                   "name": STRING,
                   "handle": NUMBER,
                   "bytes": NUMBER,
                   "used": NUMBER,
                   "inv": BOOLEAN
           }}

       This object represents a named quota.

       family
           The table’s family.

       table
           The table’s name.

       name
           The quota’s name.

       handle
           The quota’s handle. In input, it is used by the delete command only.

       bytes
           Quota threshold.

       used
           Quota used so far.

       inv
           If true, match if the quota has been exceeded.

   CT HELPER
           { "ct helper": {
                   "family": STRING,
                   "table": STRING,
                   "name": STRING,
                   "handle": ... ',
                   "type": 'STRING,
                   "protocol": CTH_PROTO,
                   "l3proto": STRING
           }}

           CTH_PROTO := "tcp" | "udp"

       This object represents a named conntrack helper.

       family
           The table’s family.

       table
           The table’s name.

       name
           The ct helper’s name.

       handle
           The ct helper’s handle. In input, it is used by the delete command only.

       type
           The ct helper type name, e.g.  "ftp" or "tftp".

       protocol
           The ct helper’s layer 4 protocol.

       l3proto
           The ct helper’s layer 3 protocol, e.g.  "ip" or "ip6".

   LIMIT
           { "limit": {
                   "family": STRING,
                   "table": STRING,
                   "name": STRING,
                   "handle": NUMBER,
                   "rate": NUMBER,
                   "per": STRING,
                   "burst": NUMBER,
                   "unit": LIMIT_UNIT,
                   "inv": BOOLEAN
           }}

           LIMIT_UNIT := "packets" | "bytes"

       This object represents a named limit.

       family
           The table’s family.

       table
           The table’s name.

       name
           The limit’s name.

       handle
           The limit’s handle. In input, it is used by the delete command only.

       rate
           The limit’s rate value.

       per
           Time unit to apply the limit to, e.g.  "week", "day", "hour", etc. If omitted,
           defaults to "second".

       burst
           The limit’s burst value. If omitted, defaults to 0.

       unit
           Unit of rate and burst values. If omitted, defaults to "packets".

       inv
           If true, match if limit was exceeded. If omitted, defaults to false.

   CT TIMEOUT
           { "ct timeout": {
                   "family": STRING,
                   "table": STRING,
                   "name": STRING,
                   "handle": NUMBER,
                   "protocol": CTH_PROTO,
                   "state": STRING,
                   "value: NUMBER,
                   "l3proto": STRING
           }}

           CTH_PROTO := "tcp" | "udp" | "dccp" | "sctp" | "gre" | "icmpv6" | "icmp" | "generic"

       This object represents a named conntrack timeout policy.

       family
           The table’s family.

       table
           The table’s name.

       name
           The ct timeout object’s name.

       handle
           The ct timeout object’s handle. In input, it is used by delete command only.

       protocol
           The ct timeout object’s layer 4 protocol.

       state
           The connection state name, e.g.  "established", "syn_sent", "close" or "close_wait",
           for which the timeout value has to be updated.

       value
           The updated timeout value for the specified connection state.

       l3proto
           The ct timeout object’s layer 3 protocol, e.g.  "ip" or "ip6".

   CT EXPECTATION
           { "ct expectation": {
                   "family": STRING,
                   "table": STRING,
                   "name": STRING,
                   "handle": NUMBER,
                   "l3proto": STRING
                   "protocol":* CTH_PROTO,
                   "dport": NUMBER,
                   "timeout: NUMBER,
                   "size: NUMBER,
           *}}

           CTH_PROTO := "tcp" | "udp" | "dccp" | "sctp" | "gre" | "icmpv6" | "icmp" | "generic"

       This object represents a named conntrack expectation.

       family
           The table’s family.

       table
           The table’s name.

       name
           The ct expectation object’s name.

       handle
           The ct expectation object’s handle. In input, it is used by delete command only.

       l3proto
           The ct expectation object’s layer 3 protocol, e.g.  "ip" or "ip6".

       protocol
           The ct expectation object’s layer 4 protocol.

       dport
           The destination port of the expected connection.

       timeout
           The time in millisecond that this expectation will live.

       size
           The maximum count of expectations to be living in the same time.

STATEMENTS

       Statements are the building blocks for rules. Each rule consists of at least one.

   VERDICT
           { "accept": null }
           { "drop": null }
           { "continue": null }
           { "return": null }
           { "jump": { "target": * STRING *}}
           { "goto": { "target": * STRING *}}

       A verdict either terminates packet traversal through the current chain or delegates to a
       different one.

       jump and goto statements expect a target chain name.

   MATCH
           { "match": {
                   "left": EXPRESSION,
                   "right": EXPRESSION,
                   "op": STRING
           }}

       This matches the expression on left hand side (typically a packet header or packet meta
       info) with the expression on right hand side (typically a constant value). If the
       statement evaluates to true, the next statement in this rule is considered. If not,
       processing continues with the next rule in the same chain.

       left
           Left hand side of this match.

       right
           Right hand side of this match.

       op
           Operator indicating the type of comparison.

       OPERATORS
           &    Binary AND

           |    Binary OR

           ^    Binary XOR

           <<   Left shift

           >>   Right shift

           ==   Equal

           !=   Not equal

           <    Less than

           >    Greater than

               Less than or equal to

           >=   Greater than or equal to

           in   Perform a lookup, i.e. test if
                bits on RHS are contained in LHS
                value

           Unlike with the standard API, the operator is mandatory here. In the standard API, a
           missing operator may be resolved in two ways, depending on the type of expression on
           the RHS:

           •   If the RHS is a bitmask or a list of bitmasks, the expression resolves into a
               binary operation with the inequality operator, like this: LHS & RHS != 0.

           •   In any other case, the equality operator is simply inserted.

           For the non-trivial first case, the JSON API supports the in operator.

   COUNTER
           { "counter": {
                   "packets": NUMBER,
                   "bytes": NUMBER
           }}

           { "counter": STRING }

       This object represents a byte/packet counter. In input, no properties are required. If
       given, they act as initial values for the counter.

       The first form creates an anonymous counter which lives in the rule it appears in. The
       second form specifies a reference to a named counter object.

       packets
           Packets counted.

       bytes
           Bytes counted.

   MANGLE
           { "mangle": {
                   "key": EXPRESSION,
                   "value": EXPRESSION
           }}

       This changes the packet data or meta info.

       key
           The packet data to be changed, given as an exthdr, payload, meta, ct or ct helper
           expression.

       value
           Value to change data to.

   QUOTA
           { "quota": {
                   "val": NUMBER,
                   "val_unit": STRING,
                   "used": NUMBER,
                   "used_unit": STRING,
                   "inv": BOOLEAN
           }}

           { "quota": STRING }

       The first form creates an anonymous quota which lives in the rule it appears in. The
       second form specifies a reference to a named quota object.

       val
           Quota value.

       val_unit
           Unit of val, e.g.  "kbytes" or "mbytes". If omitted, defaults to "bytes".

       used
           Quota used so far. Optional on input. If given, serves as initial value.

       used_unit
           Unit of used. Defaults to "bytes".

       inv
           If true, will match if quota was exceeded. Defaults to false.

   LIMIT
           { "limit": {
                   "rate": NUMBER,
                   "rate_unit": STRING,
                   "per": STRING,
                   "burst": NUMBER,
                   "burst_unit": STRING,
                   "inv": BOOLEAN
           }}

           { "limit": STRING }

       The first form creates an anonymous limit which lives in the rule it appears in. The
       second form specifies a reference to a named limit object.

       rate
           Rate value to limit to.

       rate_unit
           Unit of rate, e.g.  "packets" or "mbytes". Defaults to "packets".

       per
           Denominator of rate, e.g.  "week" or "minutes".

       burst
           Burst value. Defaults to 0.

       burst_unit
           Unit of burst, ignored if rate_unit is "packets". Defaults to "bytes".

       inv
           If true, matches if the limit was exceeded. Defaults to false.

   FWD
           { "fwd": {
                   "dev": EXPRESSION,
                   "family": FWD_FAMILY,
                   "addr": EXPRESSION
           }}

           FWD_FAMILY := "ip" | "ip6"

       Forward a packet to a different destination.

       dev
           Interface to forward the packet on.

       family
           Family of addr.

       addr
           IP(v6) address to forward the packet to.

       Both family and addr are optional, but if at least one is given, both must be present.

   NOTRACK
           { "notrack": null }

       Disable connection tracking for the packet.

   DUP
           { "dup": {
                   "addr": EXPRESSION,
                   "dev": EXPRESSION
           }}

       Duplicate a packet to a different destination.

       addr
           Address to duplicate packet to.

       dev
           Interface to duplicate packet on. May be omitted to not specify an interface
           explicitly.

   NETWORK ADDRESS TRANSLATION
           { "snat": {
                   "addr": EXPRESSION,
                   "family": STRING,
                   "port": EXPRESSION,
                   "flags": FLAGS
           }}

           { "dnat": {
                   "addr": EXPRESSION,
                   "family": STRING,
                   "port": EXPRESSION,
                   "flags": FLAGS
           }}

           { "masquerade": {
                   "port": EXPRESSION,
                   "flags": FLAGS
           }}

           { "redirect": {
                   "port": EXPRESSION,
                   "flags": FLAGS
           }}

           FLAGS := FLAG | [ FLAG_LIST ]
           FLAG_LIST := FLAG [, FLAG_LIST ]
           FLAG := "random" | "fully-random" | "persistent"

       Perform Network Address Translation.

       addr
           Address to translate to.

       family
           Family of addr, either ip or ip6. Required in inet table family.

       port
           Port to translate to.

       flags
           Flag(s).

       All properties are optional and default to none.

   REJECT
           { "reject": {
                   "type": STRING,
                   "expr": EXPRESSION
           }}

       Reject the packet and send the given error reply.

       type
           Type of reject, either "tcp reset", "icmpx", "icmp" or "icmpv6".

       expr
           ICMP type to reject with.

       All properties are optional.

   SET
           { "set": {
                   "op": STRING,
                   "elem": EXPRESSION,
                   "set": STRING
           }}

       Dynamically add/update elements to a set.

       op
           Operator on set, either "add" or "update".

       elem
           Set element to add or update.

       set
           Set reference.

   LOG
           { "log": {
                   "prefix": STRING,
                   "group": NUMBER,
                   "snaplen": NUMBER,
                   "queue-threshold": NUMBER,
                   "level": LEVEL,
                   "flags": FLAGS
           }}

           LEVEL := "emerg" | "alert" | "crit" | "err" | "warn" | "notice" |
                      "info" | "debug" | "audit"

           FLAGS := FLAG | [ FLAG_LIST ]
           FLAG_LIST := FLAG [, FLAG_LIST ]
           FLAG := "tcp sequence" | "tcp options" | "ip options" | "skuid" |
                     "ether" | "all"

       Log the packet.

       prefix
           Prefix for log entries.

       group
           Log group.

       snaplen
           Snaplen for logging.

       queue-threshold
           Queue threshold.

       level
           Log level. Defaults to "warn".

       flags
           Log flags.

       All properties are optional.

   CT HELPER
           { "ct helper": EXPRESSION }

       Enable the specified conntrack helper for this packet.

       ct helper
           CT helper reference.

   METER
           { "meter": {
                   "name": STRING,
                   "key": EXPRESSION,
                   "stmt": STATEMENT
           }}

       Apply a given statement using a meter.

       name
           Meter name.

       key
           Meter key.

       stmt
           Meter statement.

   QUEUE
           { "queue": {
                   "num": EXPRESSION,
                   "flags": FLAGS
           }}

           FLAGS := FLAG | [ FLAG_LIST ]
           FLAG_LIST := FLAG [, FLAG_LIST ]
           FLAG := "bypass" | "fanout"

       Queue the packet to userspace.

       num
           Queue number.

       flags
           Queue flags.

   VERDICT MAP
           { "vmap": {
                   "key": EXPRESSION,
                   "data": EXPRESSION
           }}

       Apply a verdict conditionally.

       key
           Map key.

       data
           Mapping expression consisting of value/verdict pairs.

   CT COUNT
           { "ct count": {
                   "val": NUMBER,
                   "inv": BOOLEAN
           }}

       Limit the number of connections using conntrack.

       val
           Connection count threshold.

       inv
           If true, match if val was exceeded. If omitted, defaults to false.

   CT TIMEOUT
           { "ct timeout": EXPRESSION }

       Assign connection tracking timeout policy.

       ct timeout
           CT timeout reference.

   CT EXPECTATION
           { "ct expectation": EXPRESSION }

       Assign connection tracking expectation.

       ct expectation
           CT expectation reference.

   XT
           { "xt": null }

       This represents an xt statement from xtables compat interface. Sadly, at this point, it is
       not possible to provide any further information about its content.

EXPRESSIONS

       Expressions are the building blocks of (most) statements. In their most basic form, they
       are just immediate values represented as a JSON string, integer or boolean type.

   IMMEDIATES
           STRING
           NUMBER
           BOOLEAN

       Immediate expressions are typically used for constant values. For strings, there are two
       special cases:

       @STRING
           The remaining part is taken as set name to create a set reference.

       \*
           Construct a wildcard expression.

   LISTS
           ARRAY

       List expressions are constructed by plain arrays containing of an arbitrary number of
       expressions.

   CONCAT
           { "concat": CONCAT }

           CONCAT := [ EXPRESSION_LIST ]
           EXPRESSION_LIST := EXPRESSION [, EXPRESSION_LIST ]

       Concatenate several expressions.

   SET
           { "set": SET }

           SET := EXPRESSION | [ EXPRESSION_LIST ]

       This object constructs an anonymous set. For mappings, an array of arrays with exactly two
       elements is expected.

   MAP
           { "map": {
                   "key": EXPRESSION,
                   "data": EXPRESSION
           }}

       Map a key to a value.

       key
           Map key.

       data
           Mapping expression consisting of value/target pairs.

   PREFIX
           { "prefix": {
                   "addr": EXPRESSION,
                   "len": NUMBER
           }}

       Construct an IPv4 or IPv6 prefix consisting of address part in addr and prefix length in
       len.

   RANGE
           { "range": [ EXPRESSION , EXPRESSION ] }

       Construct a range of values. The first array item denotes the lower boundary, the second
       one the upper boundary.

   PAYLOAD
           { "payload": {
                   "base": BASE,
                   "offset": NUMBER,
                   "len": NUMBER
           }}

           { "payload": {
                   "protocol": STRING,
                   "field": STRING
           }}

           BASE := "ll" | "nh" | "th"

       Construct a payload expression, i.e. a reference to a certain part of packet data. The
       first form creates a raw payload expression to point at a random number (len) of bytes at
       a certain offset (offset) from a given reference point (base). The following base values
       are accepted:

       "ll"
           The offset is relative to Link Layer header start offset.

       "nh"
           The offset is relative to Network Layer header start offset.

       "th"
           The offset is relative to Transport Layer header start offset.

       The second form allows to reference a field by name (field) in a named packet header
       (protocol).

   EXTHDR
           { "exthdr": {
                   "name": STRING,
                   "field": STRING,
                   "offset": NUMBER
           }}

       Create a reference to a field (field) in an IPv6 extension header (name). offset is used
       only for rt0 protocol.

       If the field property is not given, the expression is to be used as a header existence
       check in a match statement with a boolean on the right hand side.

   TCP OPTION
           { "tcp option": {
                   "name": STRING,
                   "field": STRING
           }}

       Create a reference to a field (field) of a TCP option header (name).

       If the field property is not given, the expression is to be used as a TCP option existence
       check in a match statement with a boolean on the right hand side.

   META
           { "meta": {
                   "key": META_KEY
           }}

           META_KEY := "length" | "protocol" | "priority" | "random" | "mark" |
                         "iif" | "iifname" | "iiftype" | "oif" | "oifname" |
                         "oiftype" | "skuid" | "skgid" | "nftrace" |
                         "rtclassid" | "ibriport" | "obriport" | "ibridgename" |
                         "obridgename" | "pkttype" | "cpu" | "iifgroup" |
                         "oifgroup" | "cgroup" | "nfproto" | "l4proto" |
                         "secpath"

       Create a reference to packet meta data.

   RT
           { "rt": {
                   "key": RT_KEY,
                   "family": RT_FAMILY
           }}

           RT_KEY := "classid" | "nexthop" | "mtu"
           RT_FAMILY := "ip" | "ip6"

       Create a reference to packet routing data.

       The family property is optional and defaults to unspecified.

   CT
           { "ct": {
                   "key": STRING,
                   "family": CT_FAMILY,
                   "dir": CT_DIRECTION
           }}

           CT_FAMILY := "ip" | "ip6"
           CT_DIRECTION := "original" | "reply"

       Create a reference to packet conntrack data.

       Some CT keys do not support a direction. In this case, dir must not be given.

   NUMGEN
           { "numgen": {
                   "mode": NG_MODE,
                   "mod": NUMBER,
                   "offset": NUMBER
           }}

           NG_MODE := "inc" | "random"

       Create a number generator.

       The offset property is optional and defaults to 0.

   HASH
           { "jhash": {
                   "mod": NUMBER,
                   "offset": NUMBER,
                   "expr": EXPRESSION,
                   "seed": NUMBER
           }}

           { "symhash": {
                   "mod": NUMBER,
                   "offset": NUMBER
           }}

       Hash packet data.

       The offset and seed properties are optional and default to 0.

   FIB
           { "fib": {
                   "result": FIB_RESULT,
                   "flags": FIB_FLAGS
           }}

           FIB_RESULT := "oif" | "oifname" | "type"

           FIB_FLAGS := FIB_FLAG | [ FIB_FLAG_LIST ]
           FIB_FLAG_LIST := FIB_FLAG [, FIB_FLAG_LIST ]
           FIB_FLAG := "saddr" | "daddr" | "mark" | "iif" | "oif"

       Perform kernel Forwarding Information Base lookups.

   BINARY OPERATION
           { "|": [ EXPRESSION, EXPRESSION ] }
           { "^": [ EXPRESSION, EXPRESSION ] }
           { "&": [ EXPRESSION, EXPRESSION ] }
           { "<<": [ EXPRESSION, EXPRESSION ] }
           { ">>": [ EXPRESSION, EXPRESSION ] }

       All binary operations expect an array of exactly two expressions, of which the first
       element denotes the left hand side and the second one the right hand side.

   VERDICT
           { "accept": null }
           { "drop": null }
           { "continue": null }
           { "return": null }
           { "jump": { "target": STRING }}
           { "goto": { "target": STRING }}

       Same as the verdict statement, but for use in verdict maps.

       jump and goto verdicts expect a target chain name.

   ELEM
           { "elem": {
                   "val": EXPRESSION,
                   "timeout": NUMBER,
                   "expires": NUMBER,
                   "comment": STRING
           }}

       Explicitly set element object, in case timeout, expires or comment are desired. Otherwise,
       it may be replaced by the value of val.

   SOCKET
           { "socket": {
                   "key": SOCKET_KEY
           }}

           SOCKET_KEY := "transparent"

       Construct a reference to packet’s socket.

   OSF
           { "osf": {
                   "key": OSF_KEY,
                   "ttl": OSF_TTL
           }}

           OSF_KEY := "name"
           OSF_TTL := "loose" | "skip"

       Perform OS fingerprinting. This expression is typically used in the LHS of a match
       statement.

       key
           Which part of the fingerprint info to match against. At this point, only the OS name
           is supported.

       ttl
           Define how the packet’s TTL value is to be matched. This property is optional. If
           omitted, the TTL value has to match exactly. A value of loose accepts TTL values less
           than the fingerprint one. A value of skip omits TTL value comparison entirely.

AUTHOR

       Phil Sutter <phil@nwl.cc>
           Author.

                                            12/17/2019                        LIBNFTABLES-JSON(5)