Ubuntu Manpage: qemu-block-drivers - QEMU block drivers reference

Provided by: qemu-system-common_4.2-3ubuntu6.30_amd64

NAME

       qemu-block-drivers - QEMU block drivers reference

SYNOPSIS

       QEMU block driver reference manual

DESCRIPTION

Disk image file formats

QEMU supports many image file formats that can be used with VMs as well as with any of the tools (like
"qemu-img"). This includes the preferred formats raw and qcow2 as well as formats that are supported for
compatibility with older QEMU versions or other hypervisors.

Depending on the image format, different options can be passed to "qemu-img create" and "qemu-img
convert" using the "-o" option. This section describes each format and the options that are supported
for it.

raw Raw disk image format. This format has the advantage of being simple and easily exportable to all
other emulators. If your file system supports holes (for example in ext2 or ext3 on Linux or NTFS on
Windows), then only the written sectors will reserve space. Use "qemu-img info" to know the real size
used by the image or "ls -ls" on Unix/Linux.

Supported options:

"preallocation"
Preallocation mode (allowed values: "off", "falloc", "full"). "falloc" mode preallocates space
for image by calling posix_fallocate(). "full" mode preallocates space for image by writing data
to underlying storage. This data may or may not be zero, depending on the storage location.

qcow2
QEMU image format, the most versatile format. Use it to have smaller images (useful if your
filesystem does not supports holes, for example on Windows), zlib based compression and support of
multiple VM snapshots.

Supported options:

"compat"
Determines the qcow2 version to use. "compat=0.10" uses the traditional image format that can be
read by any QEMU since 0.10. "compat=1.1" enables image format extensions that only QEMU 1.1 and
newer understand (this is the default). Amongst others, this includes zero clusters, which allow
efficient copy-on-read for sparse images.

"backing_file"
File name of a base image (see create subcommand)

"backing_fmt"
Image format of the base image

"encryption"
This option is deprecated and equivalent to "encrypt.format=aes"

"encrypt.format"
If this is set to "luks", it requests that the qcow2 payload (not qcow2 header) be encrypted
using the LUKS format. The passphrase to use to unlock the LUKS key slot is given by the
"encrypt.key-secret" parameter. LUKS encryption parameters can be tuned with the other
"encrypt.*" parameters.

If this is set to "aes", the image is encrypted with 128-bit AES-CBC. The encryption key is
given by the "encrypt.key-secret" parameter. This encryption format is considered to be flawed
by modern cryptography standards, suffering from a number of design problems:

-<The AES-CBC cipher is used with predictable initialization vectors based>
on the sector number. This makes it vulnerable to chosen plaintext attacks which can reveal
the existence of encrypted data.

-<The user passphrase is directly used as the encryption key. A poorly>
chosen or short passphrase will compromise the security of the encryption.

-<In the event of the passphrase being compromised there is no way to>
change the passphrase to protect data in any qcow images. The files must be cloned, using a
different encryption passphrase in the new file. The original file must then be securely
erased using a program like shred, though even this is ineffective with many modern storage
technologies.

The use of this is no longer supported in system emulators. Support only remains in the command
line utilities, for the purposes of data liberation and interoperability with old versions of
QEMU. The "luks" format should be used instead.

"encrypt.key-secret"
Provides the ID of a "secret" object that contains the passphrase ("encrypt.format=luks") or
encryption key ("encrypt.format=aes").

"encrypt.cipher-alg"
Name of the cipher algorithm and key length. Currently defaults to "aes-256". Only used when
"encrypt.format=luks".

"encrypt.cipher-mode"
Name of the encryption mode to use. Currently defaults to "xts". Only used when
"encrypt.format=luks".

"encrypt.ivgen-alg"
Name of the initialization vector generator algorithm. Currently defaults to "plain64". Only used
when "encrypt.format=luks".

"encrypt.ivgen-hash-alg"
Name of the hash algorithm to use with the initialization vector generator (if required).
Defaults to "sha256". Only used when "encrypt.format=luks".

"encrypt.hash-alg"
Name of the hash algorithm to use for PBKDF algorithm Defaults to "sha256". Only used when
"encrypt.format=luks".

"encrypt.iter-time"
Amount of time, in milliseconds, to use for PBKDF algorithm per key slot. Defaults to 2000. Only
used when "encrypt.format=luks".

"cluster_size"
Changes the qcow2 cluster size (must be between 512 and 2M). Smaller cluster sizes can improve
the image file size whereas larger cluster sizes generally provide better performance.

"preallocation"
Preallocation mode (allowed values: "off", "metadata", "falloc", "full"). An image with
preallocated metadata is initially larger but can improve performance when the image needs to
grow. "falloc" and "full" preallocations are like the same options of "raw" format, but sets up
metadata also.

"lazy_refcounts"
If this option is set to "on", reference count updates are postponed with the goal of avoiding
metadata I/O and improving performance. This is particularly interesting with cache=writethrough
which doesn't batch metadata updates. The tradeoff is that after a host crash, the reference
count tables must be rebuilt, i.e. on the next open an (automatic) "qemu-img check -r all" is
required, which may take some time.

This option can only be enabled if "compat=1.1" is specified.

"nocow"
If this option is set to "on", it will turn off COW of the file. It's only valid on btrfs, no
effect on other file systems.

Btrfs has low performance when hosting a VM image file, even more when the guest on the VM also
using btrfs as file system. Turning off COW is a way to mitigate this bad performance. Generally
there are two ways to turn off COW on btrfs: a) Disable it by mounting with nodatacow, then all
newly created files will be NOCOW. b) For an empty file, add the NOCOW file attribute. That's
what this option does.

Note: this option is only valid to new or empty files. If there is an existing file which is COW
and has data blocks already, it couldn't be changed to NOCOW by setting "nocow=on". One can issue
"lsattr filename" to check if the NOCOW flag is set or not (Capital 'C' is NOCOW flag).

qed Old QEMU image format with support for backing files and compact image files (when your filesystem or
transport medium does not support holes).

When converting QED images to qcow2, you might want to consider using the "lazy_refcounts=on" option
to get a more QED-like behaviour.

Supported options:

"backing_file"
File name of a base image (see create subcommand).

"backing_fmt"
Image file format of backing file (optional). Useful if the format cannot be autodetected
because it has no header, like some vhd/vpc files.

"cluster_size"
Changes the cluster size (must be power-of-2 between 4K and 64K). Smaller cluster sizes can
improve the image file size whereas larger cluster sizes generally provide better performance.

"table_size"
Changes the number of clusters per L1/L2 table (must be power-of-2 between 1 and 16). There is
normally no need to change this value but this option can be used for performance benchmarking.

qcow
Old QEMU image format with support for backing files, compact image files, encryption and
compression.

Supported options:

"backing_file"
File name of a base image (see create subcommand)

"encryption"
This option is deprecated and equivalent to "encrypt.format=aes"

"encrypt.format"
If this is set to "aes", the image is encrypted with 128-bit AES-CBC. The encryption key is
given by the "encrypt.key-secret" parameter. This encryption format is considered to be flawed
by modern cryptography standards, suffering from a number of design problems enumerated
previously against the "qcow2" image format.

The use of this is no longer supported in system emulators. Support only remains in the command
line utilities, for the purposes of data liberation and interoperability with old versions of
QEMU.

Users requiring native encryption should use the "qcow2" format instead with
"encrypt.format=luks".

"encrypt.key-secret"
Provides the ID of a "secret" object that contains the encryption key ("encrypt.format=aes").

luks
LUKS v1 encryption format, compatible with Linux dm-crypt/cryptsetup

Supported options:

"key-secret"
Provides the ID of a "secret" object that contains the passphrase.

"cipher-alg"
Name of the cipher algorithm and key length. Currently defaults to "aes-256".

"cipher-mode"
Name of the encryption mode to use. Currently defaults to "xts".

"ivgen-alg"
Name of the initialization vector generator algorithm. Currently defaults to "plain64".

"ivgen-hash-alg"
Name of the hash algorithm to use with the initialization vector generator (if required).
Defaults to "sha256".

"hash-alg"
Name of the hash algorithm to use for PBKDF algorithm Defaults to "sha256".

"iter-time"
Amount of time, in milliseconds, to use for PBKDF algorithm per key slot. Defaults to 2000.

vdi VirtualBox 1.1 compatible image format. Supported options:

"static"
If this option is set to "on", the image is created with metadata preallocation.

vmdk
VMware 3 and 4 compatible image format.

Supported options:

"backing_file"
File name of a base image (see create subcommand).

"compat6"
Create a VMDK version 6 image (instead of version 4)

"hwversion"
Specify vmdk virtual hardware version. Compat6 flag cannot be enabled if hwversion is specified.

"subformat"
Specifies which VMDK subformat to use. Valid options are "monolithicSparse" (default),
"monolithicFlat", "twoGbMaxExtentSparse", "twoGbMaxExtentFlat" and "streamOptimized".

vpc VirtualPC compatible image format (VHD). Supported options:

"subformat"
Specifies which VHD subformat to use. Valid options are "dynamic" (default) and "fixed".

VHDX
Hyper-V compatible image format (VHDX). Supported options:

"subformat"
Specifies which VHDX subformat to use. Valid options are "dynamic" (default) and "fixed".

"block_state_zero"
Force use of payload blocks of type 'ZERO'. Can be set to "on" (default) or "off". When set to
"off", new blocks will be created as "PAYLOAD_BLOCK_NOT_PRESENT", which means parsers are free to
return arbitrary data for those blocks. Do not set to "off" when using "qemu-img convert" with
"subformat=dynamic".

"block_size"
Block size; min 1 MB, max 256 MB. 0 means auto-calculate based on image size.

"log_size"
Log size; min 1 MB.

Read-only formats

More disk image file formats are supported in a read-only mode.

bochs
Bochs images of "growing" type.

cloop
Linux Compressed Loop image, useful only to reuse directly compressed CD-ROM images present for
example in the Knoppix CD-ROMs.

dmg Apple disk image.

parallels
Parallels disk image format.

Using host drives

In addition to disk image files, QEMU can directly access host devices. We describe here the usage for
QEMU version >= 0.8.3.

Linux

On Linux, you can directly use the host device filename instead of a disk image filename provided you
have enough privileges to access it. For example, use /dev/cdrom to access to the CDROM.

"CD"
You can specify a CDROM device even if no CDROM is loaded. QEMU has specific code to detect CDROM
insertion or removal. CDROM ejection by the guest OS is supported. Currently only data CDs are
supported.

"Floppy"
You can specify a floppy device even if no floppy is loaded. Floppy removal is currently not detected
accurately (if you change floppy without doing floppy access while the floppy is not loaded, the
guest OS will think that the same floppy is loaded). Use of the host's floppy device is deprecated,
and support for it will be removed in a future release.

"Hard disks"
Hard disks can be used. Normally you must specify the whole disk (/dev/hdb instead of /dev/hdb1) so
that the guest OS can see it as a partitioned disk. WARNING: unless you know what you do, it is
better to only make READ-ONLY accesses to the hard disk otherwise you may corrupt your host data (use
the -snapshot command line option or modify the device permissions accordingly).

Windows

"CD"
The preferred syntax is the drive letter (e.g. d:). The alternate syntax \\.\d: is supported.
/dev/cdrom is supported as an alias to the first CDROM drive.

Currently there is no specific code to handle removable media, so it is better to use the "change" or
"eject" monitor commands to change or eject media.

"Hard disks"
Hard disks can be used with the syntax: \\.\PhysicalDriveN where N is the drive number (0 is the
first hard disk).

WARNING: unless you know what you do, it is better to only make READ-ONLY accesses to the hard disk
otherwise you may corrupt your host data (use the -snapshot command line so that the modifications
are written in a temporary file).

Mac OS X

/dev/cdrom is an alias to the first CDROM.

Currently there is no specific code to handle removable media, so it is better to use the "change" or
"eject" monitor commands to change or eject media.

Virtual FAT disk images

QEMU can automatically create a virtual FAT disk image from a directory tree. In order to use it, just
type:

qemu-system-x86_64 linux.img -hdb fat:/my_directory

Then you access access to all the files in the /my_directory directory without having to copy them in a
disk image or to export them via SAMBA or NFS. The default access is read-only.

Floppies can be emulated with the ":floppy:" option:

qemu-system-x86_64 linux.img -fda fat:floppy:/my_directory

A read/write support is available for testing (beta stage) with the ":rw:" option:

qemu-system-x86_64 linux.img -fda fat:floppy:rw:/my_directory

What you should never do:

*<use non-ASCII filenames ;>
*<use "-snapshot" together with ":rw:" ;>
*<expect it to work when loadvm'ing ;>
*<write to the FAT directory on the host system while accessing it with the guest system.>

NBD access

QEMU can access directly to block device exported using the Network Block Device protocol.

qemu-system-x86_64 linux.img -hdb nbd://my_nbd_server.mydomain.org:1024/

If the NBD server is located on the same host, you can use an unix socket instead of an inet socket:

qemu-system-x86_64 linux.img -hdb nbd+unix://?socket=/tmp/my_socket

In this case, the block device must be exported using qemu-nbd:

qemu-nbd --socket=/tmp/my_socket my_disk.qcow2

The use of qemu-nbd allows sharing of a disk between several guests:

qemu-nbd --socket=/tmp/my_socket --share=2 my_disk.qcow2

and then you can use it with two guests:

qemu-system-x86_64 linux1.img -hdb nbd+unix://?socket=/tmp/my_socket
qemu-system-x86_64 linux2.img -hdb nbd+unix://?socket=/tmp/my_socket

If the nbd-server uses named exports (supported since NBD 2.9.18, or with QEMU's own embedded NBD
server), you must specify an export name in the URI:

qemu-system-x86_64 -cdrom nbd://localhost/debian-500-ppc-netinst
qemu-system-x86_64 -cdrom nbd://localhost/openSUSE-11.1-ppc-netinst

The URI syntax for NBD is supported since QEMU 1.3. An alternative syntax is also available. Here are
some example of the older syntax:

qemu-system-x86_64 linux.img -hdb nbd:my_nbd_server.mydomain.org:1024
qemu-system-x86_64 linux2.img -hdb nbd:unix:/tmp/my_socket
qemu-system-x86_64 -cdrom nbd:localhost:10809:exportname=debian-500-ppc-netinst

Sheepdog disk images

Sheepdog is a distributed storage system for QEMU. It provides highly available block level storage
volumes that can be attached to QEMU-based virtual machines.

You can create a Sheepdog disk image with the command:

qemu-img create sheepdog:///<image> <size>

where image is the Sheepdog image name and size is its size.

To import the existing filename to Sheepdog, you can use a convert command.

qemu-img convert <filename> sheepdog:///<image>

You can boot from the Sheepdog disk image with the command:

qemu-system-x86_64 sheepdog:///<image>

You can also create a snapshot of the Sheepdog image like qcow2.

qemu-img snapshot -c <tag> sheepdog:///<image>

where tag is a tag name of the newly created snapshot.

To boot from the Sheepdog snapshot, specify the tag name of the snapshot.

qemu-system-x86_64 sheepdog:///<image>#<tag>

You can create a cloned image from the existing snapshot.

qemu-img create -b sheepdog:///<base>#<tag> sheepdog:///<image>

where base is an image name of the source snapshot and tag is its tag name.

You can use an unix socket instead of an inet socket:

qemu-system-x86_64 sheepdog+unix:///<image>?socket=<path>

If the Sheepdog daemon doesn't run on the local host, you need to specify one of the Sheepdog servers to
connect to.

qemu-img create sheepdog://<hostname>:<port>/<image> <size>
qemu-system-x86_64 sheepdog://<hostname>:<port>/<image>

iSCSI LUNs

iSCSI is a popular protocol used to access SCSI devices across a computer network.

There are two different ways iSCSI devices can be used by QEMU.

The first method is to mount the iSCSI LUN on the host, and make it appear as any other ordinary SCSI
device on the host and then to access this device as a /dev/sd device from QEMU. How to do this differs
between host OSes.

The second method involves using the iSCSI initiator that is built into QEMU. This provides a mechanism
that works the same way regardless of which host OS you are running QEMU on. This section will describe
this second method of using iSCSI together with QEMU.

In QEMU, iSCSI devices are described using special iSCSI URLs

URL syntax:
iscsi://[<username>[%<password>]@]<host>[:<port>]/<target-iqn-name>/<lun>

Username and password are optional and only used if your target is set up using CHAP authentication for
access control. Alternatively the username and password can also be set via environment variables to
have these not show up in the process list

export LIBISCSI_CHAP_USERNAME=<username>
export LIBISCSI_CHAP_PASSWORD=<password>
iscsi://<host>/<target-iqn-name>/<lun>

Various session related parameters can be set via special options, either in a configuration file
provided via '-readconfig' or directly on the command line.

If the initiator-name is not specified qemu will use a default name of
'iqn.2008-11.org.linux-kvm[:<uuid>'] where <uuid> is the UUID of the virtual machine. If the UUID is not
specified qemu will use 'iqn.2008-11.org.linux-kvm[:<name>'] where <name> is the name of the virtual
machine.

Setting a specific initiator name to use when logging in to the target
-iscsi initiator-name=iqn.qemu.test:my-initiator

Controlling which type of header digest to negotiate with the target
-iscsi header-digest=CRC32C|CRC32C-NONE|NONE-CRC32C|NONE

These can also be set via a configuration file

[iscsi]
user = "CHAP username"
password = "CHAP password"
initiator-name = "iqn.qemu.test:my-initiator"
# header digest is one of CRC32C|CRC32C-NONE|NONE-CRC32C|NONE
header-digest = "CRC32C"

Setting the target name allows different options for different targets

[iscsi "iqn.target.name"]
user = "CHAP username"
password = "CHAP password"
initiator-name = "iqn.qemu.test:my-initiator"
# header digest is one of CRC32C|CRC32C-NONE|NONE-CRC32C|NONE
header-digest = "CRC32C"

Howto use a configuration file to set iSCSI configuration options:

cat >iscsi.conf <<EOF
[iscsi]
user = "me"
password = "my password"
initiator-name = "iqn.qemu.test:my-initiator"
header-digest = "CRC32C"
EOF

qemu-system-x86_64 -drive file=iscsi://127.0.0.1/iqn.qemu.test/1 \
-readconfig iscsi.conf

How to set up a simple iSCSI target on loopback and access it via QEMU:

This example shows how to set up an iSCSI target with one CDROM and one DISK
using the Linux STGT software target. This target is available on Red Hat based
systems as the package 'scsi-target-utils'.

tgtd --iscsi portal=127.0.0.1:3260
tgtadm --lld iscsi --op new --mode target --tid 1 -T iqn.qemu.test
tgtadm --lld iscsi --mode logicalunit --op new --tid 1 --lun 1 \
-b /IMAGES/disk.img --device-type=disk
tgtadm --lld iscsi --mode logicalunit --op new --tid 1 --lun 2 \
-b /IMAGES/cd.iso --device-type=cd
tgtadm --lld iscsi --op bind --mode target --tid 1 -I ALL

qemu-system-x86_64 -iscsi initiator-name=iqn.qemu.test:my-initiator \
-boot d -drive file=iscsi://127.0.0.1/iqn.qemu.test/1 \
-cdrom iscsi://127.0.0.1/iqn.qemu.test/2

GlusterFS disk images

GlusterFS is a user space distributed file system.

You can boot from the GlusterFS disk image with the command:

URI:
qemu-system-x86_64 -drive file=gluster[+<type>]://[<host>[:<port>]]/<volume>/<path>
[?socket=...][,file.debug=9][,file.logfile=...]

JSON:
qemu-system-x86_64 'json:{"driver":"qcow2",
"file":{"driver":"gluster",
"volume":"testvol","path":"a.img","debug":9,"logfile":"...",
"server":[{"type":"tcp","host":"...","port":"..."},
{"type":"unix","socket":"..."}]}}'

gluster is the protocol.

type specifies the transport type used to connect to gluster management daemon (glusterd). Valid
transport types are tcp and unix. In the URI form, if a transport type isn't specified, then tcp type is
assumed.

host specifies the server where the volume file specification for the given volume resides. This can be
either a hostname or an ipv4 address. If transport type is unix, then host field should not be
specified. Instead socket field needs to be populated with the path to unix domain socket.

port is the port number on which glusterd is listening. This is optional and if not specified, it
defaults to port 24007. If the transport type is unix, then port should not be specified.

volume is the name of the gluster volume which contains the disk image.

path is the path to the actual disk image that resides on gluster volume.

debug is the logging level of the gluster protocol driver. Debug levels are 0-9, with 9 being the most
verbose, and 0 representing no debugging output. The default level is 4. The current logging levels
defined in the gluster source are 0 - None, 1 - Emergency, 2 - Alert, 3 - Critical, 4 - Error, 5 -
Warning, 6 - Notice, 7 - Info, 8 - Debug, 9 - Trace

logfile is a commandline option to mention log file path which helps in logging to the specified file and
also help in persisting the gfapi logs. The default is stderr.

You can create a GlusterFS disk image with the command:

qemu-img create gluster://<host>/<volume>/<path> <size>

Examples

qemu-system-x86_64 -drive file=gluster://1.2.3.4/testvol/a.img
qemu-system-x86_64 -drive file=gluster+tcp://1.2.3.4/testvol/a.img
qemu-system-x86_64 -drive file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img
qemu-system-x86_64 -drive file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img
qemu-system-x86_64 -drive file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img
qemu-system-x86_64 -drive file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img
qemu-system-x86_64 -drive file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket
qemu-system-x86_64 -drive file=gluster+rdma://1.2.3.4:24007/testvol/a.img
qemu-system-x86_64 -drive file=gluster://1.2.3.4/testvol/a.img,file.debug=9,file.logfile=/var/log/qemu-gluster.log
qemu-system-x86_64 'json:{"driver":"qcow2",
"file":{"driver":"gluster",
"volume":"testvol","path":"a.img",
"debug":9,"logfile":"/var/log/qemu-gluster.log",
"server":[{"type":"tcp","host":"1.2.3.4","port":24007},
{"type":"unix","socket":"/var/run/glusterd.socket"}]}}'
qemu-system-x86_64 -drive driver=qcow2,file.driver=gluster,file.volume=testvol,file.path=/path/a.img,
file.debug=9,file.logfile=/var/log/qemu-gluster.log,
file.server.0.type=tcp,file.server.0.host=1.2.3.4,file.server.0.port=24007,
file.server.1.type=unix,file.server.1.socket=/var/run/glusterd.socket

Secure Shell (ssh) disk images

You can access disk images located on a remote ssh server by using the ssh protocol:

qemu-system-x86_64 -drive file=ssh://[<user>@]<server>[:<port>]/<path>[?host_key_check=<host_key_check>]

Alternative syntax using properties:

qemu-system-x86_64 -drive file.driver=ssh[,file.user=<user>],file.host=<server>[,file.port=<port>],file.path=<path>[,file.host_key_check=<host_key_check>]

ssh is the protocol.

user is the remote user. If not specified, then the local username is tried.

server specifies the remote ssh server. Any ssh server can be used, but it must implement the sftp-
server protocol. Most Unix/Linux systems should work without requiring any extra configuration.

port is the port number on which sshd is listening. By default the standard ssh port (22) is used.

path is the path to the disk image.

The optional host_key_check parameter controls how the remote host's key is checked. The default is
"yes" which means to use the local .ssh/known_hosts file. Setting this to "no" turns off known-hosts
checking. Or you can check that the host key matches a specific fingerprint:
"host_key_check=md5:78:45:8e:14:57:4f:d5:45:83:0a:0e:f3:49:82:c9:c8" ("sha1:" can also be used as a
prefix, but note that OpenSSH tools only use MD5 to print fingerprints).

Currently authentication must be done using ssh-agent. Other authentication methods may be supported in
future.

Note: Many ssh servers do not support an "fsync"-style operation. The ssh driver cannot guarantee that
disk flush requests are obeyed, and this causes a risk of disk corruption if the remote server or network
goes down during writes. The driver will print a warning when "fsync" is not supported:

warning: ssh server "ssh.example.com:22" does not support fsync

With sufficiently new versions of libssh and OpenSSH, "fsync" is supported.

NVMe disk images

NVM Express (NVMe) storage controllers can be accessed directly by a userspace driver in QEMU. This
bypasses the host kernel file system and block layers while retaining QEMU block layer functionalities,
such as block jobs, I/O throttling, image formats, etc. Disk I/O performance is typically higher than
with "-drive file=/dev/sda" using either thread pool or linux-aio.

The controller will be exclusively used by the QEMU process once started. To be able to share storage
between multiple VMs and other applications on the host, please use the file based protocols.

Before starting QEMU, bind the host NVMe controller to the host vfio-pci driver. For example:

# modprobe vfio-pci
# lspci -n -s 0000:06:0d.0
06:0d.0 0401: 1102:0002 (rev 08)
# echo 0000:06:0d.0 > /sys/bus/pci/devices/0000:06:0d.0/driver/unbind
# echo 1102 0002 > /sys/bus/pci/drivers/vfio-pci/new_id

# qemu-system-x86_64 -drive file=nvme://<host>:<bus>:<slot>.<func>/<namespace>

Alternative syntax using properties:

qemu-system-x86_64 -drive file.driver=nvme,file.device=<host>:<bus>:<slot>.<func>,file.namespace=<namespace>

host:bus:slot.func is the NVMe controller's PCI device address on the host.

namespace is the NVMe namespace number, starting from 1.

Disk image file locking

By default, QEMU tries to protect image files from unexpected concurrent access, as long as it's
supported by the block protocol driver and host operating system. If multiple QEMU processes (including
QEMU emulators and utilities) try to open the same image with conflicting accessing modes, all but the
first one will get an error.

This feature is currently supported by the file protocol on Linux with the Open File Descriptor (OFD)
locking API, and can be configured to fall back to POSIX locking if the POSIX host doesn't support Linux
OFD locking.

To explicitly enable image locking, specify "locking=on" in the file protocol driver options. If OFD
locking is not possible, a warning will be printed and the POSIX locking API will be used. In this case
there is a risk that the lock will get silently lost when doing hot plugging and block jobs, due to the
shortcomings of the POSIX locking API.

QEMU transparently handles lock handover during shared storage migration. For shared virtual disk images
between multiple VMs, the "share-rw" device option should be used.

By default, the guest has exclusive write access to its disk image. If the guest can safely share the
disk image with other writers the "-device ...,share-rw=on" parameter can be used. This is only safe if
the guest is running software, such as a cluster file system, that coordinates disk accesses to avoid
corruption.

Note that share-rw=on only declares the guest's ability to share the disk. Some QEMU features, such as
image file formats, require exclusive write access to the disk image and this is unaffected by the
share-rw=on option.

Alternatively, locking can be fully disabled by "locking=off" block device option. In the command line,
the option is usually in the form of "file.locking=off" as the protocol driver is normally placed as a
"file" child under a format driver. For example:

"-blockdev driver=qcow2,file.filename=/path/to/image,file.locking=off,file.driver=file"

To check if image locking is active, check the output of the "lslocks" command on host and see if there
are locks held by the QEMU process on the image file. More than one byte could be locked by the QEMU
instance, each byte of which reflects a particular permission that is acquired or protected by the
running block driver.

AUTHOR

       Fabrice Bellard and the QEMU Project developers

                                                   2024-10-20                            QEMU-BLOCK-DRIVERS.7(7)

NAME

SYNOPSIS

DESCRIPTION

SEE ALSO

AUTHOR