NAME

       liebert - Driver for Liebert contact-closure UPS equipment

NOTE

       This man page only documents the hardware-specific features of the liebert driver. For
       information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

       This driver supports some Liebert UPS equipment with a contact-closure interface. This
       includes the UPStation GXT2 with their contact-closure cable. The smart mode ("Multilink")
       cable is not supported by this driver.

EXTRA ARGUMENTS

       This driver does not support any extra settings in the ups.conf(5).

BUGS

       This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not
       possible with the stock contact-closure cable. You may have to build another cable with
       DTR connected through to the UPS for it to work.

       There is no way for this driver to detect the hardware or cable. It will start up
       successfully even if no UPS is present. This is a fundamental limitation of any
       contact-closure driver.

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/