Provided by: calibre_4.99.4+dfsg+really4.12.0-1ubuntu1_all 
NAME
ebook-convert - ebook-convert
ebook-convert input_file output_file [options]
Convert an e-book from one format to another.
input_file is the input and output_file is the output. Both must be specified as the first
two arguments to the command.
The output e-book format is guessed from the file extension of output_file. output_file
can also be of the special format .EXT where EXT is the output file extension. In this
case, the name of the output file is derived from the name of the input file. Note that
the filenames must not start with a hyphen. Finally, if output_file has no extension, then
it is treated as a directory and an "open e-book" (OEB) consisting of HTML files is
written to that directory. These files are the files that would normally have been passed
to the output plugin.
After specifying the input and output file you can customize the conversion by specifying
various options. The available options depend on the input and output file types. To get
help on them specify the input and output file and then use the -h option.
For full documentation of the conversion system see conversion
Whenever you pass arguments to ebook-convert that have spaces in them, enclose the
arguments in quotation marks. For example: "/some path/with spaces"
The options and default values for the options change depending on both the input and
output formats, so you should always check with:
ebook-convert myfile.input_format myfile.output_format -h
Below are the options that are common to all conversion, followed by the options specific
to every input and output format.
• VHODNE MOŽNOSTI
• IZHODNE MOŽNOSTI
• VIDEZ IN OBČUTEK
• HEVRISTIČNA OBDELAVA
• NAJDI IN ZAMENJAJ
• ZAZNAVA STRUKTURE
• KAZALO VSEBINE
• METAPODATKI
• RAZHROŠČEVANJE
--help, -h
show this help message and exit
--input-profile
Določite vhodni profil. Vhodni profil poda sistemsko informacijo pretvorbe, kako
interpretirati različne podatke v vhodnem dokumentu. Primer: ločljivost, odvisna od
dolžine (dolžina v slikovnih točkah). Izbire so:cybookg3, cybook_opus, default,
hanlinv3, hanlinv5, illiad, irexdr1000, irexdr800, kindle, msreader, mobipocket,
nook, sony, sony300, sony900
--list-recipes
List builtin recipe names. You can create an e-book from a builtin recipe like
this: ebook-convert "Recipe Name.recipe" output.epub
--output-profile
Specify the output profile. The output profile tells the conversion system how to
optimize the created document for the specified device (such as by resizing images
for the device screen size). In some cases, an output profile can be used to
optimize the output for a particular device, but this is rarely necessary. Choices
are:cybookg3, cybook_opus, default, generic_eink, generic_eink_hd,
generic_eink_large, hanlinv3, hanlinv5, illiad, ipad, ipad3, irexdr1000, irexdr800,
jetbook5, kindle, kindle_dx, kindle_fire, kindle_oasis, kindle_pw, kindle_pw3,
kindle_voyage, kobo, msreader, mobipocket, nook, nook_color, nook_hd_plus,
pocketbook_900, pocketbook_pro_912, galaxy, sony, sony300, sony900, sony-landscape,
sonyt3, tablet
--version
show program's version number and exit
VHODNE MOŽNOSTI
Možnosti za nadzor obdelave vhodne datoteke mobi
--input-encoding
Določite kodiranje znakov vhodnega dokumenta. Če je ta možnost izbrana, osnovno
kodiranje dokumenta ne bo veljalo. Ta možnost je koristna za dokumente, ki nimajo
določenega kodiranja ali pa imajo kodiranje navedeno napačno.
IZHODNE MOŽNOSTI
Možnosti za nadzor obdelave izhodne datoteke epub
--dont-split-on-page-breaks
Turn off splitting at page breaks. Normally, input files are automatically split at
every page break into two files. This gives an output e-book that can be parsed
faster and with less resources. However, splitting is slow and if your source file
contains a very large number of page breaks, you should turn off splitting on page
breaks.
--epub-flatten
This option is needed only if you intend to use the EPUB with FBReaderJ. It will
flatten the file system inside the EPUB, putting all files into the top level.
--epub-inline-toc
Insert an inline Table of Contents that will appear as part of the main book
content.
--epub-toc-at-end
Vstavljeno kazalo vsebine postavi na konec knjige namesto na začetek
--epub-version
The version of the EPUB file to generate. EPUB 2 is the most widely compatible,
only use EPUB 3 if you know you actually need it.
--extract-to
Extract the contents of the generated EPUB file to the specified directory. The
contents of the directory are first deleted, so be careful.
--flow-size
Split all HTML files larger than this size (in KB). This is necessary as most EPUB
readers cannot handle large file sizes. The default of 260KB is the size required
for Adobe Digital Editions. Set to 0 to disable size based splitting.
--no-default-epub-cover
Normally, if the input file has no cover and you don't specify one, a default cover
is generated with the title, authors, etc. This option disables the generation of
this cover.
--no-svg-cover
Do not use SVG for the book cover. Use this option if your EPUB is going to be used
on a device that does not support SVG, like the iPhone or the JetBook Lite. Without
this option, such devices will display the cover as a blank page.
--preserve-cover-aspect-ratio
When using an SVG cover, this option will cause the cover to scale to cover the
available screen area, but still preserve its aspect ratio (ratio of width to
height). That means there may be white borders at the sides or top and bottom of
the image, but the image will never be distorted. Without this option the image may
be slightly distorted, but there will be no borders.
--pretty-print
Če je tako nastavljeno, bo izhodni vtičnik poskusil prilagoditi izpis, da bo čim
bolj berljiv . Pri nekaterih vtičnikih morda ne bo imel učinka.
--toc-title
Naslov za vsako ustvarjeno vdelano kazalo vsebine.
VIDEZ IN OBČUTEK
Možnosti za nadzor videza in občutka izhoda
--asciiize
Transliterate unicode characters to an ASCII representation. Use with care because
this will replace unicode characters with ASCII. For instance it will replace
"Михаил Горбачёв" with "Mikhail Gorbachiov". Also, note that in cases where there
are multiple representations of a character (characters shared by Chinese and
Japanese for instance) the representation based on the current calibre interface
language will be used.
--base-font-size
The base font size in pts. All font sizes in the produced book will be rescaled
based on this size. By choosing a larger size you can make the fonts in the output
bigger and vice versa. By default, when the value is zero, the base font size is
chosen based on the output profile you chose.
--change-justification
Change text justification. A value of "left" converts all justified text in the
source to left aligned (i.e. unjustified) text. A value of "justify" converts all
unjustified text to justified. A value of "original" (the default) does not change
justification in the source file. Note that only some output formats support
justification.
--disable-font-rescaling
Izključite spreminjanje velikosti pisav.
--embed-all-fonts
Embed every font that is referenced in the input document but not already embedded.
This will search your system for the fonts, and if found, they will be embedded.
Embedding will only work if the format you are converting to supports embedded
fonts, such as EPUB, AZW3, DOCX or PDF. Please ensure that you have the proper
license for embedding the fonts used in this document.
--embed-font-family
Embed the specified font family into the book. This specifies the "base" font used
for the book. If the input document specifies its own fonts, they may override this
base font. You can use the filter style information option to remove fonts from the
input document. Note that font embedding only works with some output formats,
principally EPUB, AZW3 and DOCX.
--expand-css
By default, calibre will use the shorthand form for various CSS properties such as
margin, padding, border, etc. This option will cause it to use the full expanded
form instead. Note that CSS is always expanded when generating EPUB files with the
output profile set to one of the Nook profiles as the Nook cannot handle shorthand
CSS.
--extra-css
Ali pot k oblikovni predlogi CSS ali surovi CSS. Ta CSS bo dodan pravilom sloga
izvorne datoteke in ga lahko uporabimo za njihovo razveljavitev (izvorni slog).
--filter-css
A comma separated list of CSS properties that will be removed from all CSS style
rules. This is useful if the presence of some style information prevents it from
being overridden on your device. For example:
font-family,color,margin-left,margin-right
--font-size-mapping
Mapiranje iz CSS imen fonta v velikosti fonta v pts. Na primer, da je nastavitev
12,12,14,16,18,20,22,24. To je mapiranje velikosti za xx-majhna do xx-velika,
tako da je končna velikost veliki fonti. Običajno je mapiranje izbrano glede na
izbrani izhodni profil.
--insert-blank-line
Vstavi prazno vrstico med odstavke. Ne deluje, če vhodna datoteka ne uporablja
odstavkov (označb <p> ali <div>).
--insert-blank-line-size
Set the height of the inserted blank lines (in em). The height of the lines between
paragraphs will be twice the value set here.
--keep-ligatures
Preserve ligatures present in the input document. A ligature is a special rendering
of a pair of characters like ff, fi, fl et cetera. Most readers do not have support
for ligatures in their default fonts, so they are unlikely to render correctly. By
default, calibre will turn a ligature into the corresponding pair of normal
characters. This option will preserve them instead.
--line-height
The line height in pts. Controls spacing between consecutive lines of text. Only
applies to elements that do not define their own line height. In most cases, the
minimum line height option is more useful. By default no line height manipulation
is performed.
--linearize-tables
Nekateri slabo oblikovani dokumenti uporabljajo tabele za nadzor izgleda teksta na
strani. Po pretvorbi imajo taki dokumenti tekst, ki uhaja iz strani in podobno. Ta
opcija bo izbrala vsebino iz tabel in jo predstavila v linearnem načinu.
--margin-bottom
Set the bottom margin in pts. Default is 5.0. Setting this to less than zero will
cause no margin to be set (the margin setting in the original document will be
preserved). Note: Page oriented formats such as PDF and DOCX have their own margin
settings that take precedence.
--margin-left
Set the left margin in pts. Default is 5.0. Setting this to less than zero will
cause no margin to be set (the margin setting in the original document will be
preserved). Note: Page oriented formats such as PDF and DOCX have their own margin
settings that take precedence.
--margin-right
Set the right margin in pts. Default is 5.0. Setting this to less than zero will
cause no margin to be set (the margin setting in the original document will be
preserved). Note: Page oriented formats such as PDF and DOCX have their own margin
settings that take precedence.
--margin-top
Set the top margin in pts. Default is 5.0. Setting this to less than zero will
cause no margin to be set (the margin setting in the original document will be
preserved). Note: Page oriented formats such as PDF and DOCX have their own margin
settings that take precedence.
--minimum-line-height
The minimum line height, as a percentage of the element's calculated font size.
calibre will ensure that every element has a line height of at least this setting,
irrespective of what the input document specifies. Set to zero to disable. Default
is 120%. Use this setting in preference to the direct line height specification,
unless you know what you are doing. For example, you can achieve "double spaced"
text by setting this to 240.
--remove-paragraph-spacing
Remove spacing between paragraphs. Also sets an indent on paragraphs of 1.5em.
Spacing removal will not work if the source file does not use paragraphs (<p> or
<div> tags).
--remove-paragraph-spacing-indent-size
When calibre removes blank lines between paragraphs, it automatically sets a
paragraph indent, to ensure that paragraphs can be easily distinguished. This
option controls the width of that indent (in em). If you set this value negative,
then the indent specified in the input document is used, that is, calibre does not
change the indentation.
--smarten-punctuation
Convert plain quotes, dashes and ellipsis to their typographically correct
equivalents. For details, see https://daringfireball.net/projects/smartypants
--subset-embedded-fonts
Subset all embedded fonts. Every embedded font is reduced to contain only the
glyphs used in this document. This decreases the size of the font files. Useful if
you are embedding a particularly large font with lots of unused glyphs.
--transform-css-rules
Path to a file containing rules to transform the CSS styles in this book. The
easiest way to create such a file is to use the wizard for creating rules in the
calibre GUI. Access it in the "Look & feel->Transform styles" section of the
conversion dialog. Once you create the rules, you can use the "Export" button to
save them to a file.
--unsmarten-punctuation
Convert fancy quotes, dashes and ellipsis to their plain equivalents.
HEVRISTIČNA OBDELAVA
Modify the document text and structure using common patterns. Disabled by default. Use
--enable-heuristics to enable. Individual actions can be disabled with the --disable-*
options.
--disable-dehyphenate
Analiziraj deljene besede v dokumentu. Sam dokument služi kot slovar za določanje,
ali naj bodo vezaji ohranjeni ali odstranjeni.
--disable-delete-blank-paragraphs
Odstrani prazne odstavke iz dokumenta, če obstajajo med vsakim drugim odstavkom.
--disable-fix-indents
Pretvori odmike, ustvarjene z več neprelomnimi presledki, v odmike CSS.
--disable-format-scene-breaks
Left aligned scene break markers are center aligned. Replace soft scene breaks that
use multiple blank lines with horizontal rules.
--disable-italicize-common-cases
Išči pogoste besede in vzorce, ki označujejo ležečo pisavo, in postavi besedilo v
ležečo lego.
--disable-markup-chapter-headings
Detect unformatted chapter headings and sub headings. Change them to h2 and h3
tags. This setting will not create a TOC, but can be used in conjunction with
structure detection to create one.
--disable-renumber-headings
Poišče pojavitve zaporednih značk <h1> ali <h2>. Značke se preštevilčijo, s čimer
je preprečena delitev na sredi naslova poglavij.
--disable-unwrap-lines
Odstrani prelom vrstic z upoštevanjem ločil in drugih namigov.
--enable-heuristics
Omogoči hevristično procesiranje. Če želite uporabiti hevristično procesiranje,
morate omogočiti to možnost.
--html-unwrap-factor
Scale used to determine the length at which a line should be unwrapped. Valid
values are a decimal between 0 and 1. The default is 0.4, just below the median
line length. If only a few lines in the document require unwrapping this value
should be reduced
--replace-scene-breaks
Nadomesti prelome prizorov z navedenim besedilom. Privzeto je uproabljeno besedilo
iz vhodnega dokumenta.
NAJDI IN ZAMENJAJ
Spremeni besedilo in strukturo dokumenta z rabo uporabniško določenih vzorcev.
--search-replace
Path to a file containing search and replace regular expressions. The file must
contain alternating lines of regular expression followed by replacement pattern
(which can be an empty line). The regular expression must be in the Python regex
syntax and the file must be UTF-8 encoded.
--sr1-replace
Zamenjava za besedilo, najdeno z sr1-search.
--sr1-search
Iskalni vzorec (regularni izraz), ki bo zamenjan z sr1-replace.
--sr2-replace
Zamenjava za besedilo, najdeno z sr2-search.
--sr2-search
Iskalni vzorec (regularni izraz), ki bo zamenjan z sr2-replace.
--sr3-replace
Zamenjava za besedilo, najdeno z sr3-search.
--sr3-search
Iskalni vzorec (regularni izraz), ki bo zamenjan z sr3-replace.
ZAZNAVA STRUKTURE
Nadzor samodejnega zaznavanja strukture dokumenta.
--chapter
An XPath expression to detect chapter titles. The default is to consider <h1> or
<h2> tags that contain the words "chapter", "book", "section", "prologue",
"epilogue" or "part" as chapter titles as well as any tags that have
class="chapter". The expression used must evaluate to a list of elements. To
disable chapter detection, use the expression "/". See the XPath Tutorial in the
calibre User Manual for further help on using this feature.
--chapter-mark
Določite označbe zaznanih poglavij. Vrednost "prelom strani" bo vstavila prelom
pred poglavji. Vrednost "črta" bo vstavila vrstico pred poglavji. Vrednost "nič" bo
izključila označevanje poglavja in vrednost "oboje" bo uporabila prelom in vrstico
za označbo poglavij.
--disable-remove-fake-margins
Some documents specify page margins by specifying a left and right margin on each
individual paragraph. calibre will try to detect and remove these margins.
Sometimes, this can cause the removal of margins that should not have been removed.
In this case you can disable the removal.
--insert-metadata
Insert the book metadata at the start of the book. This is useful if your e-book
reader does not support displaying/searching metadata directly.
--page-breaks-before
An XPath expression. Page breaks are inserted before the specified elements. To
disable use the expression: /
--prefer-metadata-cover
Uporabi naslovnico zaznano v izvorni datoteki namesto v nastavitvah specificirane
naslovnice.
--remove-first-image
Remove the first image from the input e-book. Useful if the input document has a
cover image that is not identified as a cover. In this case, if you set a cover in
calibre, the output document will end up with two cover images if you do not
specify this option.
--start-reading-at
An XPath expression to detect the location in the document at which to start
reading. Some e-book reading programs (most prominently the Kindle) use this
location as the position at which to open the book. See the XPath tutorial in the
calibre User Manual for further help using this feature.
KAZALO VSEBINE
Nadzor samodejnega tvorjenja kazala vsebine. Glede na osnovno nastavitev, če ima vir
kazalo vsebine, bo le-to uporabljeno pri samodejnem tvorjenju.
--duplicate-links-in-toc
When creating a TOC from links in the input document, allow duplicate entries, i.e.
allow more than one entry with the same text, provided that they point to a
different location.
--level1-toc
XPath expression that specifies all tags that should be added to the Table of
Contents at level one. If this is specified, it takes precedence over other forms
of auto-detection. See the XPath Tutorial in the calibre User Manual for examples.
--level2-toc
XPath expression that specifies all tags that should be added to the Table of
Contents at level two. Each entry is added under the previous level one entry. See
the XPath Tutorial in the calibre User Manual for examples.
--level3-toc
XPath expression that specifies all tags that should be added to the Table of
Contents at level three. Each entry is added under the previous level two entry.
See the XPath Tutorial in the calibre User Manual for examples.
--max-toc-links
Največje število povezav za vnos v kazalo vsebine. Nastavite 0 za izključitev.
Privzeto je: 50. Povezave so dodane v kazalo vsebine samo, če je ugotovljeno
število poglavij manjše od mejne vrednosti.
--no-chapters-in-toc
Samodejno zaznanih poglavij ne dodaj v kazalo.
--toc-filter
Odstranitev tistih vnosov iz kazala vsebine, ki ustrezajo navedenemu regularnemu
izrazu. Ustrezajoči vnosi in vsi njihovi nasledniki so odstranjeni.
--toc-threshold
Če je ugotovljenoštevilo poglavij manjše od te številke, se povezave dodajo v
Kazalo vsebine- Privzeto: 6
--use-auto-toc
Če izvorna datoteka že vsebuje Kazalo vsebine, se to običajno uporabi prednostno. Z
vključitvijo te opcije, se vedno uporabi samodejno generiranje.
METAPODATKI
Možnosti nastavitve metapodatkov v izhodu
--author-sort
Niz, uporabljen za razvrščanje po avtorjih.
--authors
Določite avtorje. Avtorje ločite z znakom &.
--book-producer
Določite producenta knjige.
--comments
Set the e-book description.
--cover
Določite naslovnico z navedeno datoteko ali URL-jem.
--isbn Določite številko ISBN knjige.
--language
Določite jezik.
--pubdate
Set the publication date (assumed to be in the local timezone, unless the timezone
is explicitly specified)
--publisher
Set the e-book publisher.
--rating
Določite oceno. Dovoljene so številke med 1 in 5.
--read-metadata-from-opf, --from-opf, -m
Preberi metapodatke z navedene datoteke OPF. Iz te datoteke prebrani metapodatki
bodo preglasili vse podatke iz izvorne datoteke.
--series
Set the series this e-book belongs to.
--series-index
Določite indeks knjige v tej zbirki ali nizu.
--tags Določite značke za knjigo. Zapis v z vejicami ločenem seznamu.
--timestamp
Set the book timestamp (no longer used anywhere)
--title
Določite naslov.
--title-sort
Različica naslova, ki bo uporabljena pri razvrščanju.
RAZHROŠČEVANJE
Možnosti pomoči pri razhroščevanju pretvorbe
--debug-pipeline, -d
Shranjevanje izhoda na posameznih stopnjah pretvorbe v specifično mapo. Koristno je
v primeru, če ne veste na kateri točki procesa pretvorbe se je zgodila napaka.
--verbose, -v
Level of verbosity. Specify multiple times for greater verbosity. Specifying it
twice will result in full verbosity, once medium verbosity and zero times least
verbosity.
AUTHOR
Kovid Goyal
COPYRIGHT
Kovid Goyal