Provided by: hugin-tools_2021.0~beta1+dfsg-1_amd64 bug

NAME

       cpfind - Feature matching for panoramic stitching

SYNOPSIS

       cpfind [options] -o output_project project.pto

       cpfind [options] -k i0 -k i1 [...] project.pto

       cpfind [options] --kall project.pto

DESCRIPTION

       cpfind cpfind is a control-point detector for Hugin. It expects a project file as input
       and writes a project file with control-points on success.  It depends on reasonable lens
       information in the input project file.

       The first step is the feature description: In this step the images of the project file are
       loaded and so called keypoints are searched. They describe destinctive features in the
       image. cpfind uses a gradient based descriptor for the feature description of the
       keypoints.

       In a second step, the feature matching, all keypoints of two images are matched against
       each other to find features which are on both images. If this matching was successful two
       keypoints in the two images become one control point.

USAGE

   Rectilinear and fisheye images
       Cpfind can find control points in rectilinear and fisheye images. To achieve good control
       points images with a high horizontal field of view (e.g. ultra wide rectilinear or
       fisheye) are therefore remapped into a conformal space (cpfind is using the stereographic
       projection) and the feature matching occurs in this space. Before writing the control
       points the coordinates are remapped back to the image space. This happens automatic
       depending on the information about the lens in the input project file. So check that your
       input project file contains reasonable information about the used lens.

   Using celeste
       Outdoor panorama often contains clouds. Clouds are bad areas for setting control points
       because they are moving object. Cpfind can use the same algorithm as celeste_standalone to
       masked out areas which contains clouds. (This is only done internal for the keypoint
       finding step and does not change the alpha channel of your image. If you want to generate
       a mask image use celeste_standalone). To run cpfind with celeste use

          cpfind --celeste -o output.pto input.pto

       Using cpfind with integrated celeste should be superior against using cpfind and
       celeste_standalone sequential. When running cpfind with celeste areas of clouds, which
       often contains keypoints with a high quality measure, are disregarded and areas without
       clouds are used instead. When running cpfind without celeste also keypoints on clouds are
       found. When afterwards running celeste_standalone these control points are removed. In the
       worst case all control points of a certain image pair are removed.

       So running cpfind with celeste leads to a better "control point quality" for outdoor
       panorama (e.g. panorama with clouds). Running cpfind with celeste takes longer than cpfind
       alone. So for indoor panorama this option does not need to specified (because of longer
       computation time).

       The celeste step can be fine tuned by the parameters --celesteRadius and
       --celesteThreshold.

   Matching strategy
       All pairs

       This is the default matching strategy. Here all image pairs are matched against each
       other. E.g. if your project contains 5 images then cpfind matches the image pairs: 0-1,
       0-2, 0-3, 0-4, 1-2, 1-3, 1-4, 2-3, 2-4 and 3-4

       This strategy works for all shooting strategy (single-row, multi-row, unordered). It finds
       (nearly) all connected image pairs. But it is computational expensive for projects with
       many images, because it test many image pairs which are not connected.

       Linear match

       This matching strategy works best for single row panoramas:

          cpfind --linearmatch -o output.pto input.pto

       This will only detect matches between adjacent images, e.g. for the 5 image example it
       will matches images pairs 0-1, 1-2, 2-3 and 3-4. The matching distance can be increased
       with the switch --linearmatchlen. E.g. with --linearmatchlen 2 cpfind will match a image
       with the next image and the image after next, in our example it would be 0-1, 0-2, 1-2,
       1-3, 2-3, 2-4 and 3-4.

       Multirow matching

       This is an optimized matching strategy for single and multi-row panorama:

          cpfind --multirow -o output.pto input.pto

       The algorithm is the same as described in multi-row panorama. By integrating this
       algorithm into cpfind it is faster by using several cores of modern CPUs and don't caching
       the keypoints to disc (which is time consuming). If you want to use this multi-row
       matching inside hugin set the control point detector type to All images at once.

       Keypoints caching to disc

       The calculation of keypoints takes some time. So cpfind offers the possibility to save the
       keypoints to a file and reuse them later again. With --kall the keypoints for all images
       in the project are saved to disc. If you only want the keypoints of particular image use
       the parameter -k with the image number:

          cpfind --kall input.pto
          cpfind -k 0 -k 1 input.pto

       The keypoint files are saved by default into the same directory as the images with the
       extension .key. In this case no matching of images occurs and therefore no output project
       file needs to specified. If cpfind finds keyfiles for an image in the project it will use
       them automatically and not run the feature descriptor again on this image. If you want to
       save them to annother directory use the --keypath switch.

       This procedure can also be automate with the switch --cache:

          cpfind --cache -o output.pto input.pto

       In this case it tries to load existing keypoint files. For images, which don't have a
       keypoint file, the keypoints are detected and save to the file. Then it matches all loaded
       and newly found keypoints and writes the output project.

       If you don't need the keyfile longer, the can be deleted automatic by

          cpfind --clean input.pto

EXTENDED OPTIONS

   Feature description
       For speed reasons cpfind is using images, which are scaled to their half width and height,
       to find keypoints. With the switch --fullscale cpfind is working on the full scale images.
       This takes longer but can provide "better" and/or more control points.

       The feature description step can be fine-tuned by the parameters:

       --sieve1width <int>
           Sieve 1: Number of buckets on width (default: 10)

       --sieve1height <int>
           Sieve 1: Number of buckets on height (default: 10)

       --sieve1size <int>
           Sieve 1: Max points per bucket (default: 100)

       --kdtreesteps <int>
           KDTree: search steps (default: 200)

       --kdtreeseconddist <double>

       KDTree: distance of 2nd match (default: 0.25)

       Cpfind stores maximal sieve1width * sieve1height * sieve1size keypoints per image. If you
       have only a small overlap, e.g. for 360 degree panorama shoot with fisheye images, you can
       get better results if you increase sieve1size. You can also try to increase sieve1width
       and/or sieve1height.

   Feature matching
       Fine-tuning of the matching step by the following parameters:

       --ransaciter <int>
           Ransac: iterations (default: 1000)

       --ransacdist <int>
           Ransac: homography estimation distance threshold (pixels) (default: 25)

       --ransacmode (auto, hom, rpy, rpyv, rpyb)
           Select the model used in the ransac step.

           hom: Assume a homography. Only applicable for non-wide angle
                views. Uses the original panomatic code. It is also more flexible
                than required and can generate false matches, particularly if most
                of the matches are located on a single line.

           rpy: Align images using roll, pitch and yaw. This requires a good
                estimate for the horizontal field of view (and distortion, for
                heavily distorted images). It is the preferred mode if a
                calibrated lens is used, or the HFOV could be read successfully
                from the EXIF data.

           rpyv: Align pair by optimizing roll, pitch, yaw and field of
                 view. Should work without prior knowledge of the field of view,
                 but might fail more often, due to error function used in the
                 panotools optimizer, it tends to shrink the fov to 0.

           rpyvb: Align pair by optimizing roll, pitch, yaw, field of view and
                  the "b" distortion parameter.  Probably very fragile, just
                  implemented for testing.

           auto: Use homography for images with hfov < 65 degrees and rpy otherwise.

       --minmatches <int>
           Minimum matches (default: 4)

       --sieve2width <int>
           Sieve 2: Number of buckets on width (default: 5)

       --sieve2height <int>
           Sieve 2: Number of buckets on height (default: 5)

       --sieve2size <int>
           Sieve 2: Max points per bucket (default: 2)

           Cpfind generates between minmatches and sieve2width * sieve2height * sieve2size
           control points between an image pair. (Default setting is between 4 and 50 (=5*5*2)
           control points per image pair.) If less then minmatches control points are found for a
           given image pairs these control points are disregarded and this image pair is
           considers as not connected. For narrow overlaps you can try to decrease minmatches,
           but this increases the risk of getting wrong control points.

OPTIONS

       --celesteRadius <int>
           Radius for celeste (default 20)

       --celesteThreshold <double>
           Threshold for celeste (default 0.5)

       --celeste
           Run celeste sky identification after loading images, this ignores all features
           associated with 'clouds'.

       -p <string, --keypath <string>
           Path to cache keyfiles

       --clean
           Clean up cached keyfiles

       -c, --cache
           Caches keypoints to external file

       --kall
           Write keyfiles for all images

       -k <int>, --writekeyfile <int>
           Write a keyfile for this image number (accepted multiple times)

       -o <string>, --output <string>
           Output file, required

       -n <int>, --ncores <int>
           Number of CPU/Cores (default:autodetect)

       -t, --test
           Enables test mode

       --fullscale
           Uses full scale image to detect keypoints (default:false)

       --sieve1width <int>
           Sieve 1 : Number of buckets on width (default : 10)

       --sieve1height <int>
           Sieve 1 : Number of buckets on height (default : 10)

       --sieve1size <int>
           Sieve 1 : Max points per bucket (default : 100)

       --kdtreesteps <int>
           KDTree : search steps (default : 200)

       --kdtreeseconddist <double>
           KDTree : distance of 2nd match (default : 0.15)

       --multirow
           Enable heuristic multi row matching (default: off)

       --linearmatch
           Enable linear images matching (default : all pairs)

       --linearmatchlen <int>
           Number of images to match in linear matching (default:1)

       --minmatches <int>
           Minimum matches (default : 4)

       --ransaciter <int>
           Ransac : iterations (default : 1000)

       --ransacdist <int>
           Ransac : homography estimation distance threshold (pixels) (default : 25)

       --sieve2width <int>
           Sieve 2 : Number of buckets on width (default : 5)

       --sieve2height <int>
           Sieve 2 : Number of buckets on height (default : 5)

       --sieve2size <int>
           Sieve 2 : Max points per bucket (default : 2)

       --, --ignore_rest
           Ignores the rest of the labeled arguments following this flag.

       --version
           Displays version information and exits.

       -h, --help
           Displays usage information and exits.

AUTHORS

       Anael Orlinski, Pablo d'Angelo, Antoine Deleforge, Thomas Modes

"Version: 2021.0.0"                         2021-10-23                                  CPFIND(1)