Provided by: krb5-user_1.19.2-2ubuntu0.5_amd64 
NAME
kadmin - Kerberos V5 database administration program
SYNOPSIS
kadmin [-O|-N] [-r realm] [-p principal] [-q query] [[-c cache_name]|[-k [-t keytab]]|-n] [-w password]
[-s admin_server[:port]] [command args...]
kadmin.local [-r realm] [-p principal] [-q query] [-d dbname] [-e enc:salt ...] [-m] [-x db_args]
[command args...]
DESCRIPTION
kadmin and kadmin.local are command-line interfaces to the Kerberos V5 administration system. They
provide nearly identical functionalities; the difference is that kadmin.local directly accesses the KDC
database, while kadmin performs operations using kadmind(8). Except as explicitly noted otherwise, this
man page will use "kadmin" to refer to both versions. kadmin provides for the maintenance of Kerberos
principals, password policies, and service key tables (keytabs).
The remote kadmin client uses Kerberos to authenticate to kadmind using the service principal
kadmin/admin or kadmin/ADMINHOST (where ADMINHOST is the fully-qualified hostname of the admin server).
If the credentials cache contains a ticket for one of these principals, and the -c credentials_cache
option is specified, that ticket is used to authenticate to kadmind. Otherwise, the -p and -k options
are used to specify the client Kerberos principal name used to authenticate. Once kadmin has determined
the principal name, it requests a service ticket from the KDC, and uses that service ticket to
authenticate to kadmind.
Since kadmin.local directly accesses the KDC database, it usually must be run directly on the primary KDC
with sufficient permissions to read the KDC database. If the KDC database uses the LDAP database module,
kadmin.local can be run on any host which can access the LDAP server.
OPTIONS
-r realm
Use realm as the default database realm.
-p principal
Use principal to authenticate. Otherwise, kadmin will append /admin to the primary principal name
of the default ccache, the value of the USER environment variable, or the username as obtained
with getpwuid, in order of preference.
-k Use a keytab to decrypt the KDC response instead of prompting for a password. In this case, the
default principal will be host/hostname. If there is no keytab specified with the -t option, then
the default keytab will be used.
-t keytab
Use keytab to decrypt the KDC response. This can only be used with the -k option.
-n Requests anonymous processing. Two types of anonymous principals are supported. For fully
anonymous Kerberos, configure PKINIT on the KDC and configure pkinit_anchors in the client's
krb5.conf(5). Then use the -n option with a principal of the form @REALM (an empty principal name
followed by the at-sign and a realm name). If permitted by the KDC, an anonymous ticket will be
returned. A second form of anonymous tickets is supported; these realm-exposed tickets hide the
identity of the client but not the client's realm. For this mode, use kinit -n with a normal
principal name. If supported by the KDC, the principal (but not realm) will be replaced by the
anonymous principal. As of release 1.8, the MIT Kerberos KDC only supports fully anonymous
operation.
-c credentials_cache
Use credentials_cache as the credentials cache. The cache should contain a service ticket for the
kadmin/admin or kadmin/ADMINHOST (where ADMINHOST is the fully-qualified hostname of the admin
server) service; it can be acquired with the kinit(1) program. If this option is not specified,
kadmin requests a new service ticket from the KDC, and stores it in its own temporary ccache.
-w password
Use password instead of prompting for one. Use this option with care, as it may expose the
password to other users on the system via the process list.
-q query
Perform the specified query and then exit.
-d dbname
Specifies the name of the KDC database. This option does not apply to the LDAP database module.
-s admin_server[:port]
Specifies the admin server which kadmin should contact.
-m If using kadmin.local, prompt for the database master password instead of reading it from a stash
file.
-e "enc:salt ..."
Sets the keysalt list to be used for any new keys created. See Keysalt_lists in kdc.conf(5) for a
list of possible values.
-O Force use of old AUTH_GSSAPI authentication flavor.
-N Prevent fallback to AUTH_GSSAPI authentication flavor.
-x db_args
Specifies the database specific arguments. See the next section for supported options.
Starting with release 1.14, if any command-line arguments remain after the options, they will be treated
as a single query to be executed. This mode of operation is intended for scripts and behaves differently
from the interactive mode in several respects:
• Query arguments are split by the shell, not by kadmin.
• Informational and warning messages are suppressed. Error messages and query output (e.g. for
get_principal) will still be displayed.
• Confirmation prompts are disabled (as if -force was given). Password prompts will still be issued as
required.
• The exit status will be non-zero if the query fails.
The -q option does not carry these behavior differences; the query will be processed as if it was entered
interactively. The -q option cannot be used in combination with a query in the remaining arguments.
DATABASE OPTIONS
Database options can be used to override database-specific defaults. Supported options for the DB2
module are:
-x dbname=*filename*
Specifies the base filename of the DB2 database.
-x lockiter
Make iteration operations hold the lock for the duration of the entire operation, rather than
temporarily releasing the lock while handling each principal. This is the default behavior,
but this option exists to allow command line override of a [dbmodules] setting. First
introduced in release 1.13.
-x unlockiter
Make iteration operations unlock the database for each principal, instead of holding the lock
for the duration of the entire operation. First introduced in release 1.13.
Supported options for the LDAP module are:
-x host=ldapuri
Specifies the LDAP server to connect to by a LDAP URI.
-x binddn=bind_dn
Specifies the DN used to bind to the LDAP server.
-x bindpwd=password
Specifies the password or SASL secret used to bind to the LDAP server. Using this option may
expose the password to other users on the system via the process list; to avoid this, instead
stash the password using the stashsrvpw command of kdb5_ldap_util(8).
-x sasl_mech=mechanism
Specifies the SASL mechanism used to bind to the LDAP server. The bind DN is ignored if a SASL
mechanism is used. New in release 1.13.
-x sasl_authcid=name
Specifies the authentication name used when binding to the LDAP server with a SASL mechanism,
if the mechanism requires one. New in release 1.13.
-x sasl_authzid=name
Specifies the authorization name used when binding to the LDAP server with a SASL mechanism.
New in release 1.13.
-x sasl_realm=realm
Specifies the realm used when binding to the LDAP server with a SASL mechanism, if the
mechanism uses one. New in release 1.13.
-x debug=level
sets the OpenLDAP client library debug level. level is an integer to be interpreted by the
library. Debugging messages are printed to standard error. New in release 1.12.
COMMANDS
When using the remote client, available commands may be restricted according to the privileges specified
in the kadm5.acl(5) file on the admin server.
add_principal
add_principal [options] newprinc
Creates the principal newprinc, prompting twice for a password. If no password policy is specified with
the -policy option, and the policy named default is assigned to the principal if it exists. However,
creating a policy named default will not automatically assign this policy to previously existing
principals. This policy assignment can be suppressed with the -clearpolicy option.
This command requires the add privilege.
Aliases: addprinc, ank
Options:
-expire expdate
(getdate string) The expiration date of the principal.
-pwexpire pwexpdate
(getdate string) The password expiration date.
-maxlife maxlife
(duration or getdate string) The maximum ticket life for the principal.
-maxrenewlife maxrenewlife
(duration or getdate string) The maximum renewable life of tickets for the principal.
-kvno kvno
The initial key version number.
-policy policy
The password policy used by this principal. If not specified, the policy default is used if it
exists (unless -clearpolicy is specified).
-clearpolicy
Prevents any policy from being assigned when -policy is not specified.
{-|+}allow_postdated
-allow_postdated prohibits this principal from obtaining postdated tickets. +allow_postdated
clears this flag.
{-|+}allow_forwardable
-allow_forwardable prohibits this principal from obtaining forwardable tickets.
+allow_forwardable clears this flag.
{-|+}allow_renewable
-allow_renewable prohibits this principal from obtaining renewable tickets. +allow_renewable
clears this flag.
{-|+}allow_proxiable
-allow_proxiable prohibits this principal from obtaining proxiable tickets. +allow_proxiable
clears this flag.
{-|+}allow_dup_skey
-allow_dup_skey disables user-to-user authentication for this principal by prohibiting others from
obtaining a service ticket encrypted in this principal's TGT session key. +allow_dup_skey clears
this flag.
{-|+}requires_preauth
+requires_preauth requires this principal to preauthenticate before being allowed to kinit.
-requires_preauth clears this flag. When +requires_preauth is set on a service principal, the KDC
will only issue service tickets for that service principal if the client's initial authentication
was performed using preauthentication.
{-|+}requires_hwauth
+requires_hwauth requires this principal to preauthenticate using a hardware device before being
allowed to kinit. -requires_hwauth clears this flag. When +requires_hwauth is set on a service
principal, the KDC will only issue service tickets for that service principal if the client's
initial authentication was performed using a hardware device to preauthenticate.
{-|+}ok_as_delegate
+ok_as_delegate sets the okay as delegate flag on tickets issued with this principal as the
service. Clients may use this flag as a hint that credentials should be delegated when
authenticating to the service. -ok_as_delegate clears this flag.
{-|+}allow_svr
-allow_svr prohibits the issuance of service tickets for this principal. In release 1.17 and
later, user-to-user service tickets are still allowed unless the -allow_dup_skey flag is also set.
+allow_svr clears this flag.
{-|+}allow_tgs_req
-allow_tgs_req specifies that a Ticket-Granting Service (TGS) request for a service ticket for
this principal is not permitted. +allow_tgs_req clears this flag.
{-|+}allow_tix
-allow_tix forbids the issuance of any tickets for this principal. +allow_tix clears this flag.
{-|+}needchange
+needchange forces a password change on the next initial authentication to this principal.
-needchange clears this flag.
{-|+}password_changing_service
+password_changing_service marks this principal as a password change service principal.
{-|+}ok_to_auth_as_delegate
+ok_to_auth_as_delegate allows this principal to acquire forwardable tickets to itself from
arbitrary users, for use with constrained delegation.
{-|+}no_auth_data_required
+no_auth_data_required prevents PAC or AD-SIGNEDPATH data from being added to service tickets for
the principal.
{-|+}lockdown_keys
+lockdown_keys prevents keys for this principal from leaving the KDC via kadmind. The chpass and
extract operations are denied for a principal with this attribute. The chrand operation is
allowed, but will not return the new keys. The delete and rename operations are also denied if
this attribute is set, in order to prevent a malicious administrator from replacing principals
like krbtgt/* or kadmin/* with new principals without the attribute. This attribute can be set
via the network protocol, but can only be removed using kadmin.local.
-randkey
Sets the key of the principal to a random value.
-nokey Causes the principal to be created with no key. New in release 1.12.
-pw password
Sets the password of the principal to the specified string and does not prompt for a password.
Note: using this option in a shell script may expose the password to other users on the system via
the process list.
-e enc:salt,...
Uses the specified keysalt list for setting the keys of the principal. See Keysalt_lists in
kdc.conf(5) for a list of possible values.
-x db_princ_args
Indicates database-specific options. The options for the LDAP database module are:
-x dn=dn
Specifies the LDAP object that will contain the Kerberos principal being created.
-x linkdn=dn
Specifies the LDAP object to which the newly created Kerberos principal object will point.
-x containerdn=container_dn
Specifies the container object under which the Kerberos principal is to be created.
-x tktpolicy=policy
Associates a ticket policy to the Kerberos principal.
NOTE:
• The containerdn and linkdn options cannot be specified with the dn option.
• If the dn or containerdn options are not specified while adding the principal, the principals
are created under the principal container configured in the realm or the realm container.
• dn and containerdn should be within the subtrees or principal container configured in the
realm.
Example:
kadmin: addprinc jennifer
No policy specified for "jennifer@ATHENA.MIT.EDU";
defaulting to no policy.
Enter password for principal jennifer@ATHENA.MIT.EDU:
Re-enter password for principal jennifer@ATHENA.MIT.EDU:
Principal "jennifer@ATHENA.MIT.EDU" created.
kadmin:
modify_principal
modify_principal [options] principal
Modifies the specified principal, changing the fields as specified. The options to add_principal also
apply to this command, except for the -randkey, -pw, and -e options. In addition, the option
-clearpolicy will clear the current policy of a principal.
This command requires the modify privilege.
Alias: modprinc
Options (in addition to the addprinc options):
-unlock
Unlocks a locked principal (one which has received too many failed authentication attempts without
enough time between them according to its password policy) so that it can successfully
authenticate.
rename_principal
rename_principal [-force] old_principal new_principal
Renames the specified old_principal to new_principal. This command prompts for confirmation, unless the
-force option is given.
This command requires the add and delete privileges.
Alias: renprinc
delete_principal
delete_principal [-force] principal
Deletes the specified principal from the database. This command prompts for deletion, unless the -force
option is given.
This command requires the delete privilege.
Alias: delprinc
change_password
change_password [options] principal
Changes the password of principal. Prompts for a new password if neither -randkey or -pw is specified.
This command requires the changepw privilege, or that the principal running the program is the same as
the principal being changed.
Alias: cpw
The following options are available:
-randkey
Sets the key of the principal to a random value.
-pw password
Set the password to the specified string. Using this option in a script may expose the password
to other users on the system via the process list.
-e enc:salt,...
Uses the specified keysalt list for setting the keys of the principal. See Keysalt_lists in
kdc.conf(5) for a list of possible values.
-keepold
Keeps the existing keys in the database. This flag is usually not necessary except perhaps for
krbtgt principals.
Example:
kadmin: cpw systest
Enter password for principal systest@BLEEP.COM:
Re-enter password for principal systest@BLEEP.COM:
Password for systest@BLEEP.COM changed.
kadmin:
purgekeys
purgekeys [-all|-keepkvno oldest_kvno_to_keep] principal
Purges previously retained old keys (e.g., from change_password -keepold) from principal. If -keepkvno
is specified, then only purges keys with kvnos lower than oldest_kvno_to_keep. If -all is specified,
then all keys are purged. The -all option is new in release 1.12.
This command requires the modify privilege.
get_principal
get_principal [-terse] principal
Gets the attributes of principal. With the -terse option, outputs fields as quoted tab-separated
strings.
This command requires the inquire privilege, or that the principal running the the program to be the same
as the one being listed.
Alias: getprinc
Examples:
kadmin: getprinc tlyu/admin
Principal: tlyu/admin@BLEEP.COM
Expiration date: [never]
Last password change: Mon Aug 12 14:16:47 EDT 1996
Password expiration date: [never]
Maximum ticket life: 0 days 10:00:00
Maximum renewable life: 7 days 00:00:00
Last modified: Mon Aug 12 14:16:47 EDT 1996 (bjaspan/admin@BLEEP.COM)
Last successful authentication: [never]
Last failed authentication: [never]
Failed password attempts: 0
Number of keys: 1
Key: vno 1, aes256-cts-hmac-sha384-192
MKey: vno 1
Attributes:
Policy: [none]
kadmin: getprinc -terse systest
systest@BLEEP.COM 3 86400 604800 1
785926535 753241234 785900000
tlyu/admin@BLEEP.COM 786100034 0 0
kadmin:
list_principals
list_principals [expression]
Retrieves all or some principal names. expression is a shell-style glob expression that can contain the
wild-card characters ?, *, and []. All principal names matching the expression are printed. If no
expression is provided, all principal names are printed. If the expression does not contain an @
character, an @ character followed by the local realm is appended to the expression.
This command requires the list privilege.
Alias: listprincs, get_principals, getprincs
Example:
kadmin: listprincs test*
test3@SECURE-TEST.OV.COM
test2@SECURE-TEST.OV.COM
test1@SECURE-TEST.OV.COM
testuser@SECURE-TEST.OV.COM
kadmin:
get_strings
get_strings principal
Displays string attributes on principal.
This command requires the inquire privilege.
Alias: getstrs
set_string
set_string principal name value
Sets a string attribute on principal. String attributes are used to supply per-principal configuration
to the KDC and some KDC plugin modules. The following string attribute names are recognized by the KDC:
require_auth
Specifies an authentication indicator which is required to authenticate to the principal as a
service. Multiple indicators can be specified, separated by spaces; in this case any of the
specified indicators will be accepted. (New in release 1.14.)
session_enctypes
Specifies the encryption types supported for session keys when the principal is authenticated to
as a server. See Encryption_types in kdc.conf(5) for a list of the accepted values.
otp Enables One Time Passwords (OTP) preauthentication for a client principal. The value is a JSON
string representing an array of objects, each having optional type and username fields.
pkinit_cert_match
Specifies a matching expression that defines the certificate attributes required for the client
certificate used by the principal during PKINIT authentication. The matching expression is in the
same format as those used by the pkinit_cert_match option in krb5.conf(5). (New in release 1.16.)
This command requires the modify privilege.
Alias: setstr
Example:
set_string host/foo.mit.edu session_enctypes aes128-cts
set_string user@FOO.COM otp "[{""type"":""hotp"",""username"":""al""}]"
del_string
del_string principal key
Deletes a string attribute from principal.
This command requires the delete privilege.
Alias: delstr
add_policy
add_policy [options] policy
Adds a password policy named policy to the database.
This command requires the add privilege.
Alias: addpol
The following options are available:
-maxlife time
(duration or getdate string) Sets the maximum lifetime of a password.
-minlife time
(duration or getdate string) Sets the minimum lifetime of a password.
-minlength length
Sets the minimum length of a password.
-minclasses number
Sets the minimum number of character classes required in a password. The five character classes
are lower case, upper case, numbers, punctuation, and whitespace/unprintable characters.
-history number
Sets the number of past keys kept for a principal. This option is not supported with the LDAP KDC
database module.
-maxfailure maxnumber
Sets the number of authentication failures before the principal is locked. Authentication
failures are only tracked for principals which require preauthentication. The counter of failed
attempts resets to 0 after a successful attempt to authenticate. A maxnumber value of 0 (the
default) disables lockout.
-failurecountinterval failuretime
(duration or getdate string) Sets the allowable time between authentication failures. If an
authentication failure happens after failuretime has elapsed since the previous failure, the
number of authentication failures is reset to 1. A failuretime value of 0 (the default) means
forever.
-lockoutduration lockouttime
(duration or getdate string) Sets the duration for which the principal is locked from
authenticating if too many authentication failures occur without the specified failure count
interval elapsing. A duration of 0 (the default) means the principal remains locked out until it
is administratively unlocked with modprinc -unlock.
-allowedkeysalts
Specifies the key/salt tuples supported for long-term keys when setting or changing a principal's
password/keys. See Keysalt_lists in kdc.conf(5) for a list of the accepted values, but note that
key/salt tuples must be separated with commas (',') only. To clear the allowed key/salt policy
use a value of '-'.
Example:
kadmin: add_policy -maxlife "2 days" -minlength 5 guests
kadmin:
modify_policy
modify_policy [options] policy
Modifies the password policy named policy. Options are as described for add_policy.
This command requires the modify privilege.
Alias: modpol
delete_policy
delete_policy [-force] policy
Deletes the password policy named policy. Prompts for confirmation before deletion. The command will
fail if the policy is in use by any principals.
This command requires the delete privilege.
Alias: delpol
Example:
kadmin: del_policy guests
Are you sure you want to delete the policy "guests"?
(yes/no): yes
kadmin:
get_policy
get_policy [ -terse ] policy
Displays the values of the password policy named policy. With the -terse flag, outputs the fields as
quoted strings separated by tabs.
This command requires the inquire privilege.
Alias: getpol
Examples:
kadmin: get_policy admin
Policy: admin
Maximum password life: 180 days 00:00:00
Minimum password life: 00:00:00
Minimum password length: 6
Minimum number of password character classes: 2
Number of old keys kept: 5
Reference count: 17
kadmin: get_policy -terse admin
admin 15552000 0 6 2 5 17
kadmin:
The "Reference count" is the number of principals using that policy. With the LDAP KDC database module,
the reference count field is not meaningful.
list_policies
list_policies [expression]
Retrieves all or some policy names. expression is a shell-style glob expression that can contain the
wild-card characters ?, *, and []. All policy names matching the expression are printed. If no
expression is provided, all existing policy names are printed.
This command requires the list privilege.
Aliases: listpols, get_policies, getpols.
Examples:
kadmin: listpols
test-pol
dict-only
once-a-min
test-pol-nopw
kadmin: listpols t*
test-pol
test-pol-nopw
kadmin:
ktadd
ktadd [options] principal
ktadd [options] -glob princ-exp
Adds a principal, or all principals matching princ-exp, to a keytab file. Each principal's keys are
randomized in the process. The rules for princ-exp are described in the list_principals command.
This command requires the inquire and changepw privileges. With the -glob form, it also requires the
list privilege.
The options are:
-k[eytab] keytab
Use keytab as the keytab file. Otherwise, the default keytab is used.
-e enc:salt,...
Uses the specified keysalt list for setting the new keys of the principal. See Keysalt_lists in
kdc.conf(5) for a list of possible values.
-q Display less verbose information.
-norandkey
Do not randomize the keys. The keys and their version numbers stay unchanged. This option cannot
be specified in combination with the -e option.
An entry for each of the principal's unique encryption types is added, ignoring multiple keys with the
same encryption type but different salt types.
Alias: xst
Example:
kadmin: ktadd -k /tmp/foo-new-keytab host/foo.mit.edu
Entry for principal host/foo.mit.edu@ATHENA.MIT.EDU with kvno 3,
encryption type aes256-cts-hmac-sha1-96 added to keytab
FILE:/tmp/foo-new-keytab
kadmin:
ktremove
ktremove [options] principal [kvno | all | old]
Removes entries for the specified principal from a keytab. Requires no permissions, since this does not
require database access.
If the string "all" is specified, all entries for that principal are removed; if the string "old" is
specified, all entries for that principal except those with the highest kvno are removed. Otherwise, the
value specified is parsed as an integer, and all entries whose kvno match that integer are removed.
The options are:
-k[eytab] keytab
Use keytab as the keytab file. Otherwise, the default keytab is used.
-q Display less verbose information.
Alias: ktrem
Example:
kadmin: ktremove kadmin/admin all
Entry for principal kadmin/admin with kvno 3 removed from keytab
FILE:/etc/krb5.keytab
kadmin:
lock
Lock database exclusively. Use with extreme caution! This command only works with the DB2 KDC database
module.
unlock
Release the exclusive database lock.
list_requests
Lists available for kadmin requests.
Aliases: lr, ?
quit
Exit program. If the database was locked, the lock is released.
Aliases: exit, q
HISTORY
The kadmin program was originally written by Tom Yu at MIT, as an interface to the OpenVision Kerberos
administration program.
ENVIRONMENT
See kerberos(7) for a description of Kerberos environment variables.
SEE ALSO
kpasswd(1), kadmind(8), kerberos(7)
AUTHOR
MIT
COPYRIGHT
1985-2021, MIT