Provided by: rrdtool_1.7.2-3ubuntu6_amd64 bug

NAME

       rrdgraph_graph - rrdtool graph command reference

SYNOPSIS

       PRINT:vname:format[:strftime|:valstrftime|:valstrfduration]

       GPRINT:vname:format

       COMMENT:text

       VRULE:time#color[:[legend][:dashes[=on_s[,off_s[,on_s,off_s]...]][:dash-offset=offset]]]

       HRULE:value#color[:[legend][:dashes[=on_s[,off_s[,on_s,off_s]...]][:dash-offset=offset]]]

       LINE[width]:value[#color][:[legend][:STACK][:skipscale][:dashes[=on_s[,off_s
       [,on_s,off_s]...]][:dash-offset=offset]]]

       AREA:value[#color][:[legend][:STACK][:skipscale]]

       TICK:vname#rrggbb[aa][:fraction[:legend]]

       SHIFT:vname:offset

       TEXTALIGN:{left|right|justified|center}

       PRINT:vname:CF:format (deprecated)

       GPRINT:vname:CF:format (deprecated)

       STACK:vname#color[:legend] (deprecated)

DESCRIPTION

       These instructions allow you to generate your image or report.  If you don't use any graph
       elements, no graph is generated.  Similarly, no report is generated if you don't use print
       options.

   PRINT
       PRINT:vname:format[:strftime|:valstrftime|:valstrfduration]

       Depending on the context, either the value component (no suffix, valstrftime or
       valstrfduration) or the time component (strftime) of a VDEF is printed using format. It is
       an error to specify a vname generated by a DEF or CDEF.

       Any text in format is printed literally with one exception: The percent character
       introduces a formatter string. This string can be:

       For printing values:

       %%  just prints a literal '%' character

       %#.#le
           prints numbers like 1.2346e+04. The optional integers # denote field width and decimal
           precision.

       %#.#lf
           prints numbers like 12345.6789 (%5.4lf), with optional field width and precision.

       %s  place this after %le, %lf or %lg. This will be replaced by the appropriate SI
           magnitude unit and the value will be scaled accordingly (123456 -> 123.456 k).

       %S  is similar to %s. It does, however, use a previously defined magnitude unit. If there
           is no such unit yet, it tries to define one (just like %s) unless the value is zero,
           in which case the magnitude unit stays undefined. Thus, formatter strings using %S and
           no %s will all use the same magnitude unit except for zero values.

       If you PRINT a VDEF value, you can also print the time associated with it by appending the
       string :strftime to the format. Note that RRDtool uses the strftime function of your OSs C
       library. This means that the conversion specifier may vary. Check the manual page if you
       are uncertain. The following is a list of conversion specifiers usually supported across
       the board. Formatting values interpreted as timestamps with :valstrftime is done likewise.

       %a  The abbreviated weekday name according to the current locale.

       %A  The full weekday name according to the current locale.

       %b  The abbreviated month name according to the current locale.

       %B  The full month name according to the current locale.

       %c  The preferred date and time representation for the current locale.

       %d  The day of the month as a decimal number (range 01 to 31).

       %H  The hour as a decimal number using a 24-hour clock (range 00 to 23).

       %I  The hour as a decimal number using a 12-hour clock (range 01 to 12).

       %j  The day of the year as a decimal number (range 001 to 366).

       %m  The month as a decimal number (range 01 to 12).

       %M  The minute as a decimal number (range 00 to 59).

       %p  Either `AM' or `PM' according to the given time value, or the corresponding strings
           for the current locale.  Noon is treated as `pm' and midnight as `am'.  Note that in
           many locales a `pm' notation is unsupported and in such cases %p will return an empty
           string.

       %s  The second as a decimal number (range 00 to 61).

       %S  The seconds since the epoch (1.1.1970) (libc dependent non standard!)

       %U  The  week  number  of  the current year as a decimal number, range 00 to 53, starting
           with the first Sunday as the first day of week 01. See also %V and %W.

       %V  The ISO 8601:1988 week number of the current year as a decimal number, range 01 to
           53,  where week  1 is the first week that has at least 4 days in the current year, and
           with Monday as the first day of the week. See also %U and %W.

       %w  The day of the week as a decimal, range 0 to 6, Sunday being 0.  See also %u.

       %W  The week number of the current year as a decimal number, range 00 to  53,  starting
           with  the first Monday as the first day of week 01.

       %x  The preferred date representation for the current locale without the time.

       %X  The preferred time representation for the current locale without the date.

       %y  The year as a decimal number without a century (range 00 to 99).

       %Y  The year as a decimal number including the century.

       %Z  The time zone or name or abbreviation.

       %%  A literal `%' character.

       Formatting values as duration is done using printf like conversion specifications:

        - All non-conversion specification chars are copied unchanged
        - A conversion specification has format '%' [ ['0'] minwidth ] [ '.' precision ] conversion-specifier

       With conversion-specifier being one of:

       %   A raw '%' is output, width and precision are ignored

       W   Number of weeks

       d   Number of days, modulus number of weeks

       D   Number of days

       h   Number of hours, modulus number of days

       H   Number of hours

       m   Number of minutes, modulus number of hours

       M   Number of minutes

       s   Number of seconds, modulus number of minutes

       S   Number of seconds

       f   Number of milliseconds, modulus seconds

       PRINT:vname:CF:format

       Deprecated. Use the new form of this command in new scripts.  The first form of this
       command is to be used with CDEF vnames.

   GRAPH
       GPRINT:vname:format

       This is the same as "PRINT", but printed inside the graph.

       GPRINT:vname:CF:format

       Deprecated. Use the new form of this command in new scripts.  This is the same as "PRINT",
       but printed inside the graph.

       COMMENT:text

       Text is printed literally in the legend section of the graph. Note that in RRDtool 1.2 you
       have to escape colons in COMMENT text in the same way you have to escape them in *PRINT
       commands by writing '\:'.

       VRULE:time#color[:[legend][:dashes[=on_s[,off_s[,on_s,off_s]...]][:dash-offset=offset]]]

       Draw a vertical line at time.  Its color is composed from three hexadecimal numbers
       specifying the rgb color components (00 is off, FF is maximum) red, green and blue
       followed by an optional alpha. Optionally, a legend box and string is printed in the
       legend section. time may be a number or a variable from a VDEF. It is an error to use
       vnames from DEF or CDEF here.  Dashed lines can be drawn using the dashes modifier. See
       LINE for more details.

       HRULE:value#color[:[legend][:dashes[=on_s[,off_s[,on_s,off_s]...]][:dash-offset=offset]]]

       Draw a horizontal line at value.  HRULE acts much like LINE except that will have no
       effect on the scale of the graph. If a HRULE is outside the graphing area it will just not
       be visible and it will not appear in the legend by default.

       LINE[width]:value[#color][:[legend][:STACK][:skipscale][:dashes[=on_s[,off_s
       [,on_s,off_s]...]][:dash-offset=offset]]]

       Draw a line of the specified width onto the graph. width can be a floating point number.
       If the color is not specified, the drawing is done 'invisibly'. This is useful when
       stacking something else on top of this line. Also optional is the legend box and string
       which will be printed in the legend section if specified. The value can be generated by
       DEF, VDEF, and CDEF.  If the optional STACK modifier is used, this line is stacked on top
       of the previous element which can be a LINE or an AREA.

       Normally the graphing function makes sure that the entire LINE or AREA is visible in the
       chart. The scaling of the chart will be modified accordingly if necessary. Any LINE or
       AREA can be excluded from this process by adding the option skipscale.

       The dashes modifier enables dashed line style. Without any further options a symmetric
       dashed line with a segment length of 5 pixels will be drawn. The dash pattern can be
       changed if the dashes= parameter is followed by either one value or an even number (1, 2,
       4, 6, ...) of positive values. Each value provides the length of alternate on_s and off_s
       portions of the stroke. The dash-offset parameter specifies an offset into the pattern at
       which the stroke begins.

       When you do not specify a color, you cannot specify a legend.  Should you want to use
       STACK, use the "LINEx:<value>::STACK" form.

       AREA:value[#color[#color2]][:[legend][:STACK][:skipscale][:gradheight=y]

       See LINE, however the area between the x-axis and the line will be filled.

       If color2 is specified, the area will be filled with a gradient.

       The gradheight parameter can create three different behaviors. If gradheight > 0, then the
       gradient is a fixed height, starting at the line going down.  If gradheight < 0, then the
       gradient starts at a fixed height above the x-axis, going down to the x-axis.  If height
       == 0, then the gradient goes from the line to x-axis.

       The default value for gradheight is 50.

       TICK:vname#rrggbb[aa][:fraction[:legend]]

       Plot a tick mark (a vertical line) for each value of vname that is non-zero and not
       *UNKNOWN*. The fraction argument specifies the length of the tick mark as a fraction of
       the y-axis; the default value is 0.1 (10% of the axis). Note that the color specification
       is not optional. The TICK marks normally start at the lower edge of the graphing area. If
       the fraction is negative they start at the upper border of the graphing area.

       SHIFT:vname:offset

       Using this command RRDtool will graph the following elements with the specified offset.
       For instance, you can specify an offset of ( 7*24*60*60 = ) 604'800 seconds to "look back"
       one week. Make sure to tell the viewer of your graph you did this ...  As with the other
       graphing elements, you can specify a number or a variable here.

       TEXTALIGN:{left|right|justified|center}

       Labels are placed below the graph. When they overflow to the left, they wrap to the next
       line. By default, lines are justified left and right. The TEXTALIGN function lets you
       change this default. This is a command and not an option, so that you can change the
       default several times in your argument list.

       STACK:vname#color[:legend]

       Deprecated.  Use the STACK modifiers on the other commands instead!

       Some notes on stacking

       When stacking, an element is not placed above the X-axis but rather on top of the previous
       element.  There must be something to stack upon.

       You can use an invisible LINE or AREA to stacked upon.

       An unknown value makes the entire stack unknown from that moment on.  You don't know where
       to begin (the unknown value) and therefore do not know where to end.

       If you want to make sure you will be displaying a certain variable, make sure never to
       stack upon the unknown value.  Use a CDEF instruction with IF and UN to do so.

NOTES on legend arguments

   Escaping the colon
       A colon ':' in a legend argument will mark the end of the legend. To enter a ':' as part
       of a legend, the colon must be escaped with a backslash '\:'.  Beware that many
       environments process backslashes themselves, so it may be necessary to write two
       backslashes in order to one being passed onto rrd_graph.

   String Formatting
       The text printed below the actual graph can be formatted by appending special escape
       characters at the end of a text. Whenever such a character occurs, all pending text is
       pushed onto the graph according to the character specified.

       Valid markers are: \j for justified, \l for left aligned, \r for right aligned, and \c for
       centered. In the next section there is an example showing how to use centered formatting.

       \n is a valid alias for \l since incomplete parsing in earlier versions of RRDtool lead to
       this behavior and a number of people has been using it.

       Normally there are two space characters inserted between every two items printed into the
       graph. The space following a string can be suppressed by putting a \g at the end of the
       string. The \g also ignores any space inside the string if it is at the very end of the
       string. This can be used in connection with %s to suppress empty unit strings.

        GPRINT:a:MAX:%lf%s\g

       A special case is COMMENT:\s which inserts some additional vertical space before placing
       the next row of legends.

       If you want to have left and right aligned legends on the same line use COMMENT:\u to go
       one line back like this:

        COMMENT:left\l
        COMMENT:\u
        COMMENT:right\r

       There is also a 'nop' control for situations where you want a string to actually end in a
       backslash character sequence \.

        COMMENT:OS\2\.

       When using a proportional font in your graph, the tab characters or the sequence \t will
       line-up legend elements. Note that the tabs inserted are relative to the start of the
       current legend element!

       Since RRDtool 1.3 is using Pango for rending text, you can use Pango markup.  Pango uses
       the xml span tags for inline formatting instructions.

       A simple example of a marked-up string might be:

        <span foreground="blue" size="x-large">Blue text</span> is <i>cool</i>!

       The complete list of attributes for the span tag (taken from the pango documentation):

       font_desc
           A font description string, such as "Sans Italic 12"; note that any other span
           attributes will override this description. So if you have "Sans Italic" and also a
           style="normal" attribute, you will get Sans normal, not italic.

       font_family
           A font family name

       face
           Synonym for font_family

       size
           Font size in 1024ths of a point, or one of the absolute sizes 'xx-small', 'x-small',
           'small', 'medium', 'large', 'x-large', 'xx-large', or one of the relative sizes
           'smaller' or 'larger'. If you want to specify an absolute size, it's usually easier to
           take advantage of the ability to specify a partial font description using 'font_desc';
           you can use font_desc='12.5' rather than size='12800'.

       style
           One of 'normal', 'oblique', 'italic'

       weight
           One of 'ultralight', 'light', 'normal', 'bold', 'ultrabold', 'heavy', or a numeric
           weight

       variant
           'normal' or 'smallcaps'

       stretch
           One of 'ultracondensed', 'extracondensed', 'condensed', 'semicondensed', 'normal',
           'semiexpanded', 'expanded', 'extraexpanded', 'ultraexpanded'

       foreground
           An RGB color specification such as '#00FF00' or a color name such as 'red'

       background
           An RGB color specification such as '#00FF00' or a color name such as 'red'

       underline
           One of 'none', 'single', 'double', 'low', 'error'

       underline_color
           The color of underlines; an RGB color specification such as '#00FF00' or a color name
           such as 'red'

       rise
           Vertical displacement, in 10000ths of an em. Can be negative for subscript, positive
           for superscript.

       strikethrough
           'true' or 'false' whether to strike through the text

       strikethrough_color
           The color of crossed out lines; an RGB color specification such as '#00FF00' or a
           color name such as 'red'

       fallback
           'true' or 'false' whether to enable fallback. If disabled, then characters will only
           be used from the closest matching font on the system. No fallback will be done to
           other fonts on the system that might contain the characters in the text. Fallback is
           enabled by default. Most applications should not disable fallback.

       lang
           A language code, indicating the text language

       letter_spacing
           Inter-letter spacing in 1024ths of a point.

       gravity
           One of 'south', 'east', 'north', 'west', 'auto'.

       gravity_hint
           One of 'natural', 'strong', 'line'.

       To save you some typing, there are also some shortcuts:

       b   Bold

       big Makes font relatively larger, equivalent to <span size="larger">

       i   Italic

       s   Strike through

       sub Subscript

       sup Superscript

       small
           Makes font relatively smaller, equivalent to <span size="smaller">

       tt  Monospace font

       u   Underline

SEE ALSO

       rrdgraph gives an overview of how rrdtool graph works.  rrdgraph_data describes DEF,CDEF
       and VDEF in detail.  rrdgraph_rpn describes the RPN language used in the ?DEF statements.
       rrdgraph_graph page describes all of the graph and print functions.

       Make sure to read rrdgraph_examples for tips&tricks.

AUTHOR

       Program by Tobias Oetiker <tobi@oetiker.ch>

       This manual page by Alex van den Bogaerdt <alex@vandenbogaerdt.nl> with corrections and/or
       additions by several people