Provided by: tint2_17.0.1-1_amd64 
NAME
tint2 - lightweight panel/taskbar
DESCRIPTION
tint2 is a simple panel/taskbar made for modern X window managers. It was specifically
made for Openbox but it should also work with other window managers (GNOME, KDE, XFCE
etc.).
Features:
· Panel with taskbar, system tray, clock and launcher icons;
· Easy to customize: color/transparency on fonts, icons, borders and backgrounds;
· Pager like capability: move tasks between workspaces (virtual desktops), switch
between workspaces;
· Multi-monitor capability: create one panel per monitor, showing only the tasks
from the current monitor;
· Customizable mouse events.
Goals:
· Be unintrusive and light (in terms of memory, CPU and aesthetic);
· Follow the freedesktop.org specifications;
· Make certain workflows, such as multi-desktop and multi-monitor, easy to use.
SYNOPSIS
tint2 [OPTION...]
OPTIONS
-c path_to_config_file
Specifies which configuration file to use instead of the default.
-v, --version
Prints version information and exits.
-h, --help
Display this help and exits.
CONFIGURATION
Table of contents
· Introduction ⟨#introduction⟩
· Backgrounds and borders ⟨#backgrounds-and-borders⟩
· Gradients ⟨#gradients⟩
· Panel ⟨#panel⟩
· Launcher ⟨#launcher⟩
· Taskbar/Pager ⟨#taskbar-pager⟩
· Taskbar buttons ⟨#taskbar-buttons⟩
· Mouse actions for taskbar buttons ⟨#mouse-actions-for-taskbar-buttons⟩
· System tray ⟨#system-tray⟩
· Clock ⟨#clock⟩
· Tooltip ⟨#tooltip⟩
· Battery ⟨#battery⟩
· Executor ⟨#executor⟩
· Button ⟨#button⟩
· Separator ⟨#separator⟩
· Example configuration ⟨#example-configuration⟩
Introduction
These are instructions for configuring tint2 directly by editing its config file. You may
also use instead the graphical interface tint2conf.
The first time you run tint2, it will create the config file in
$HOME/.config/tint2/tint2rc (This applies if you have done a clean install. Running tint2
in the source directory without doing 'make install' will not create the config file.)
You can also specify another file on the command line with the -c option, e.g.: tint2 -c
$HOME/tint2.conf. This can be used to run multiple instances of tint2 that use different
settings.
If you change the config file while tint2 is running, the command killall -SIGUSR1 tint2
will force tint2 to reload it.
All the configuration options supported in the config file are listed below. Try to
respect as much as possible the order of the options as given below.
Backgrounds and borders
The tint2 config file starts with the options defining background elements with borders:
· rounded = number_of_pixels : the corner radius
· border_width = integer : the border width in pixels
· border_sides = LRTB : the sides to draw the border on (left, right, top, bottom).
If not specified, all sides are used. (since 0.12.12)
· background_color = color opacity
· color is specified in hex RGB, e.g. #ff0000 is red
· opacity varies from (0 to 100), where 0 is fully transparent, 100 is fully
opaque. Note that for a transparent panel you need to enable a desktop
compositor (such as compton or compiz).
· border_color = color opacity
· color is specified in hex RGB, e.g. #ff0000 is red
· opacity varies from (0 to 100), where 0 is fully transparent, 100 is fully
opaque
· background_color_hover = color opacity (default: same as background_color) (since
0.12.3)
· color is specified in hex RGB, e.g. #ff0000 is red
· opacity varies from (0 to 100), where 0 is fully transparent, 100 is fully
opaque. Note that for a transparent panel you need to enable a desktop
compositor (such as compton or compiz)
· border_color_hover = color opacity (default: same as border_color) (since 0.12.3)
· color is specified in hex RGB, e.g. #ff0000 is red
· opacity varies from (0 to 100), where 0 is fully transparent, 100 is fully
opaque
· background_color_pressed = color opacity (default: same as
background_color_hover) (since 0.12.3)
· color is specified in hex RGB, e.g. #ff0000 is red
· opacity varies from (0 to 100), where 0 is fully transparent, 100 is fully
opaque. Note that for a transparent panel you need to enable a desktop
compositor (such as compton or compiz)
· border_color_pressed = color opacity (default: same as border_color_hover) (since
0.12.3)
· color is specified in hex RGB, e.g. #ff0000 is red
· opacity varies from (0 to 100), where 0 is fully transparent, 100 is fully
opaque
· border_content_tint_weight = integer : Mixes the border color with the content
color (for tasks, this is the average color of the window icon). Values must be
between 0 (no mixing) and 100 (fully replaces the color). (since 16.0)
· background_content_tint_weight = integer : Mixes the background color with the
content color (for tasks, this is the average color of the window icon). Values
must be between 0 (no mixing) and 100 (fully replaces the color). (since 16.0)
You can define as many backgrounds as you want. For example, the following config defines
two backgrounds:
rounded = 1
border_width = 0
background_color = #282828 100
border_color = #000000 0
rounded = 1
border_width = 0
background_color = #f6b655 90
border_color = #cccccc 40
tint2 automatically identifies each background with a number starting from 1 (1, 2, ...).
Afterwards, you can apply a background to objects (panel, taskbar, task, clock, systray)
using the background id, for example:
panel_background_id = 1
taskbar_background_id = 0
task_background_id = 0
task_active_background_id = 2
systray_background_id = 0
clock_background_id = 0
Identifier 0 refers to a special background which is fully transparent, identifier 1
applies the first background defined in the config file etc.
Gradients
(Available since 0.13.0)
Backgrounds also allow specifying gradient layers that are drawn on top of the solid color
background.
First the user must define one or more gradients in the config file, each starting with
gradient = TYPE. These must be added before backgrounds.
Then gradients can be added by index to backgrounds, using the gradient_id = INDEX,
gradient_id_hover = INDEX and gradient_id_pressed = INDEX, where INDEX is the gradient
index, starting from 1.
Gradient types
Gradients vary the color between fixed control points: * vertical gradients:
top-to-bottom; * horizontal gradients: left-to-right; * radial gradients:
center-to-corners.
The user must specify the start and end colors, and can optionally add extra color stops
in between using the color_stop option, as explained below.
Vertical gradient, with color varying from the top edge to the bottom edge, two colors
gradient = vertical
start_color = #rrggbb opacity
end_color = #rrggbb opacity
Horizontal gradient, with color varying from the left edge to the right edge, two colors
gradient = horizontal
start_color = #rrggbb opacity
end_color = #rrggbb opacity
Radial gradient, with color varying from the center to the corner, two colors:
gradient = radial
start_color = #rrggbb opacity
end_color = #rrggbb opacity
Adding extra color stops (0% and 100% remain fixed, more colors at x% between the start and
end control points)
color_stop = percentage #rrggbb opacity
Gradient examples
# Gradient 1: thin film effect
gradient = horizontal
start_color = #111122 30
end_color = #112211 30
color_stop = 60 #221111 30
# Gradient 2: radial glow
gradient = radial
start_color = #ffffff 20
end_color = #ffffff 0
# Gradient 3: elegant black
gradient = vertical
start_color = #444444 100
end_color = #222222 100
# Gradient 4: elegant black
gradient = horizontal
start_color = #111111 100
end_color = #222222 100
# Background 1: Active desktop name
rounded = 2
border_width = 1
border_sides = TBLR
background_color = #555555 10
border_color = #ffffff 60
background_color_hover = #555555 10
border_color_hover = #ffffff 60
background_color_pressed = #555555 10
border_color_pressed = #ffffff 60
gradient_id = 3
gradient_id_hover = 4
gradient_id_pressed = 2
[...]
Panel
· panel_items = LTSBC defines the items tint2 will show and the order of those
items. Each letter refers to an item, defined as:
· L shows the Launcher
· T shows the Taskbar
· S shows the Systray (also called notification area)
· B shows the Battery status
· C shows the Clock
· F adds an extensible spacer (freespace). You can specify more than one. Has no
effect if T is also present. (since 0.12)
· E adds an executor plugin. You can specify more than one. (since 0.12.4)
· P adds a push button. You can specify more than one. (since 0.14)
· : adds a separator. You can specify more than one. (since 0.13.0)
For example, panel_items = STC will show the systray, the taskbar and the clock
(from left to right).
· panel_monitor = monitor (all or primary or 1 or 2 or ...) : Which monitor tint2
draws the panel on
· The first monitor is 1
· Use panel_monitor = all to get a separate panel per monitor
· primary_monitor_first = boolean (0 or 1) : Place the primary monitor before all
the other monitors in the list. (since 0.12.4; removed in 1.0, use primary
instead)
[](images/panel_padding.jpg)
· panel_position = vertical_position horizontal_position orientation
· vertical_position is one of: bottom, top, center
· horizontal_position is one of: left, right, center
· orientation is one of: horizontal, vertical
· panel_size = width height
· width and height can be specified without units (e.g. 123) as pixels, or
followed by % as percentages of the monitor size (e.g. 50%). Use 100% for full
monitor width/height. Example:
· scale_relative_to_dpi = integer : If set to a non-zero value, HiDPI scaling is
enabled. Each panel is visible on a different monitor. Thus each panel has a
specific scaling factor. The scaling factor is computed as the ratio between the
monitor DPI (obtained from the dimensions in pixels and millimeters from RandR)
and a configured reference DPI - this is the DPI for which exising user configs
looked normal, for backward compatibility.
· scale_relative_to_screen_height = integer : Similar to scale_relative_to_dpi,
except the scaling factor is computed as the ratio between the monitor height and
scale_relative_to_screen_height. The effect is cumulative with
scale_relative_to_dpi, i.e. if both options are present, the factors are
multiplied.
# The panel's width is 94% the size of the monitor, the height is 30 pixels:
panel_size = 94% 30
· panel_shrink = boolean (0 or 1) : If set to 1, the panel will shrink to a compact
size dynamically. (since 0.13)
· panel_margin = horizontal_margin vertical_margin : The margins define the
distance between the panel and the horizontal/vertical monitor edge. Use 0 to
obtain a panel with the same size as the edge of the monitor (no margin).
[](images/panelsizemargin.jpg)
· panel_padding = horizontal_padding vertical_padding spacing : Please refer to the
image below.
[](images/panel_padding.jpg)
· font_shadow = boolean (0 or 1)
· panel_background_id = integer : Which background to use for the panel.
· wm_menu = boolean (0 or 1) : Defines if tint2 forwards unhandled mouse events to
your window manager. Useful for window managers such as openbox, which display
the start menu if you right click on the desktop.
· panel_dock = boolean (0 or 1) : Defines if tint2 is placed into the window
manager's dock. For the openbox window manager it is advised to also use a
modifier for the moveButton option, otherwise the mouse click is not forwarded to
tint2 (in ~/.config/openbox/rc.xml).
· panel_pivot_struts = boolean (0 or 1) : Defines if tint2 lies to the window
manager about its orientation (horizontal vs vertical) when requesting reserved
space with STRUTs (see strut_policy below). On some window managers, this allows
placing a panel in the middle of the virtual screen, e.g. on the bottom edge of
the top monitor in a vertical dual-monitor setup.
· panel_layer = bottom/normal/top : Places tint2 into the bottom/normal/top layer.
This is helpful for specifying if the panel can be covered by other windows or
not. The default is the bottom layer, but with real transparency normal or top
layer may be a nice alternative.
· strut_policy = follow_size/minimum/none : STRUTs are used by the window manager
to decide the size of maximized windows. Note: on multi-monitor (Xinerama)
setups, the panel generally must be placed at the edge (not in the middle) of the
virtual screen for this to work correctly (though on some window managers,
setting panel_pivot_struts may work around this limitation).
· follow_size means that the maximized windows always resize to have a common
edge with tint2.
· minimum means that the maximized windows always expand to have a common edge
with the hidden panel. This is useful if the autohide option is enabled.
· none means that the maximized windows use the full screen size.
· panel_window_name = string : Defines the name of the panel's window. Default:
'tint2'. (since 0.12)
· disable_transparency = boolean (0 or 1) : Whether to disable transparency instead
of detecting if it is supported. Useful on broken graphics stacks. (since 0.12)
· mouse_effects = boolean (0 or 1) : Whether to enable mouse hover effects for
clickable items. (since 0.12.3)
· mouse_hover_icon_asb = alpha (0 to 100) saturation (-100 to 100) brightness (-100
to 100) : Adjusts the icon color and transparency on mouse hover (works only when
mouse_effects = 1).` (since 0.12.3)
· mouse_pressed_icon_asb = alpha (0 to 100) saturation (-100 to 100) brightness
(-100 to 100) : Adjusts the icon color and transparency on mouse press (works
only when mouse_effects = 1).` (since 0.12.3)
· autohide = boolean (0 or 1) : Whether to enable panel hiding when the mouse
cursor exists the panel.
· autohide_show_timeout = float : Show timeout in seconds after the mouse cursor
enters the panel. Use '.' as decimal separator.
· autohide_hide_timeout = float : Hide timeout in seconds after the mouse cursor
exits the panel. Use '.' as decimal separator.
· autohide_height = integer : panel height (width for vertical panels) in hidden
mode.
Launcher
· launcher_item_app = path_to_application : Each launcher_item_app must be a file
path to a .desktop file following the freedesktop.org specification
⟨http://standards.freedesktop.org/desktop-entry-spec/desktop-entry-spec-
latest.html⟩. The paths may begin with ~, which is expanded to the path of the
user's home directory. If only a file name is specified, the file is search in
the standard application directories ($XDG_DATA_HOME/applications,
~/.local/share/applications, $XDG_DATA_DIRS/applications,
/usr/local/share/applications, /usr/share/applications, /opt/share/applications).
· launcher_apps_dir = path_to_directory : Specifies a path to a directory from
which the launcher is loading all .desktop files (all subdirectories are explored
recursively). Can be used multiple times. The path may begin with ~, which is
expanded to the path of the user's home directory. (since 0.12)
· launcher_background_id = integer : Defines which background to use.
· launcher_icon_background_id = integer : Defines which background to use for
icons.
· launcher_padding = horizontal_padding vertical_padding spacing
· launcher_icon_size = integer : The launcher icon size, in pixels.
· launcher_icon_theme = name_of_theme : (Optional) Uses the specified icon theme to
display shortcut icons. Note that tint2 will detect and use the icon theme of
your desktop if you have an XSETTINGS manager running (which you probably do),
unless launcher_icon_theme_override = 1.
· launcher_icon_theme_override = boolean (0 or 1) : Whether launcher_icon_theme
overrides the value obtained from the XSETTINGS manager. (since 0.12)
· launcher_icon_asb = alpha (0 to 100) saturation (-100 to 100) brightness (-100 to
100) : Adjusts the icon color and transparency.
· launcher_tooltip = boolean (0 or 1) : Whether to show tooltips for the launcher
icons.
· startup_notifications = boolean (0 or 1) : Whether to show startup notifications
when starting applications from the launcher. (since 0.12)
Taskbar / Pager
· taskbar_mode = single_desktop/multi_desktop
· single_desktop : Shows a normal taskbar listing the tasks running on the
current virtual desktop (also known as 'workspace');
· multi_desktop : Pager like capability. Shows multiple taskbars, one per virtual
desktop, with which:
· You can drag-and-drop tasks between virtual desktops;
· You can switch between virtual desktops.
· taskbar_hide_if_empty = boolean (0 or 1) : If enabled, in multi-desktop mode the
taskbars corresponding to empty desktops different from the current desktop are
hidden. (since 0.13)
· taskbar_distribute_size = boolean (0 or 1) : If enabled, in multi-desktop mode
distributes between taskbars the available size proportionally to the number of
tasks. Default: disabled. (since 0.12)
· taskbar_padding = horizontal_padding vertical_padding spacing
[](images/taskbar_padding.jpg)
· taskbar_background_id = integer : Which background to use
· taskbar_active_background_id = integer : Which background to use for the taskbar
of the current virtual desktop.
· taskbar_hide_inactive_tasks = boolean (0 or 1) : If enabled, the taskbar shows
only the active task. (since 0.12)
· taskbar_hide_different_monitor = boolean (0 or 1) : If enabled, the taskbar
shows only the tasks from the current monitor. Useful when running different
tint2 instances on different monitors, each one having its own config. (since
0.12)
· taskbar_hide_different_desktop = boolean (0 or 1) : If enabled, the taskbar
shows only the tasks from the current desktop. Useful to make multi-desktop
taskbars more compact, but still allow desktop switching with mouse click. (since
1.0)
· taskbar_always_show_all_desktop_tasks = boolean (0 or 1) : Has effect only if
taskbar_mode = multi_desktop. If enabled, tasks that appear on all desktops are
shown on all taskbars. Otherwise, they are shown only on the taskbar of the
current desktop. (since 0.12.4)
· taskbar_sort_order = none/title/center : Specifies the sort order of the tasks on
the taskbar. (since 0.12)
· none : No sorting. New tasks are simply appended at the end of the taskbar when
they appear.
· title : Sorts the tasks by title.
· application : Sorts the tasks by application name. (since 16.3)
· center : Sorts the tasks by their window centers.
· mru : Shows the most recently used tasks first. (since 0.12.4)
· lru : Shows the most recently used tasks last. (since 0.12.4)
· task_align = left/center/right : Specifies the alignment of the tasks on the
taskbar. Default: left.
· taskbar_name = boolean (0 or 1) : Whether to show the virtual desktop name in
the taskbar.
· taskbar_name_padding = padding : Padding for the virtual desktop name.
· taskbar_name_background_id = integer : Which background to use for the desktop
name.
· taskbar_name_font = [FAMILY-LIST] [STYLE-OPTIONS] [SIZE] : Font configuration
for the desktop name.
· taskbar_name_font_color = color opacity (0 to 100) : Font color for the desktop
name.
· taskbar_name_active_background_id = integer : Which background to use for the
name of the current desktop.
· taskbar_name_active_font_color = color opacity (0 to 100) : Font color for the
name of the current desktop.
Taskbar buttons
The following options configure the task buttons in the taskbar:
· task_icon = boolean (0 or 1) : Whether to display the task icon. There is no
explicit option to control the task icon size; it depends on the vertical padding
set with task_padding.
· task_text = boolean (0 or 1) : Whether to display the task text.
· task_centered = boolean (0 or 1) : Whether the task text is centered.
· task_tooltip = boolean (0 or 1) : Whether to show tooltips for tasks.
· task_thumbnail = boolean (0 or 1) : Whether to show thumbnail tooltips for tasks.
(since 16.0)
· task_thumbnail_size = width : Thumbnail size. (since 16.0)
· task_maximum_size = width height
· width is used with horizontal panels to limit the size of the tasks. Use width
= 0 to get full taskbar width.
· height is used with vertical panels.
· task_padding = horizontal_padding vertical_padding spacing
· urgent_nb_of_blink = integer : Number of blinks on 'get attention' events.
[](images/task_padding.jpg)
· task_font = [FAMILY-LIST] [STYLE-OPTIONS] [SIZE]
· task_font_color = color opacity (0 to 100)
· task_icon_asb = alpha (0 to 100) saturation (-100 to 100) brightness (-100 to
100) : Adjust the task icon's color and transparency.
· task_background_id = integer : Which background to use for non selected tasks
For the next 3 options STATUS can be active / iconified / urgent:
* task_STATUS_font_color = color opacity (0 to 100)
· task_STATUS_icon_asb = alpha (0 to 100) saturation (-100 to 100) brightness (-100
to 100) : Adjusts the task icon's color and transparency.
· task_STATUS_background_id = integer : Which background to use for the task.
Mouse actions for taskbar buttons
The possible mouse events are: left, middle, right, scroll_up, scroll_down.
The possible mouse actions are: none, close, toggle, iconify, shade, toggle_iconify,
maximize_restore, desktop_left, desktop_right, next_task, prev_task.
Use mouse_event = action to customize mouse actions. Example:
mouse_middle = none
mouse_right = close
mouse_scroll_up = toggle
mouse_scroll_down = iconify
The action semantics:
* none : If wm_menu = 1 is set, the mouse event is forwarded to the window manager.
Otherwise it is ignored. * close : close the task * toggle : toggle the task *
iconify : iconify (minimize) the task * toggle_iconify : toggle or iconify the task
* maximize_restore : maximized or minimized the task * shade : shades (collapses)
the task * desktop_left : send the task to the desktop on the left * desktop_right
: send the task to the desktop on the right * next_task : send the focus to next
task * prev_task : send the focus to previous task
System Tray
· systray_padding = horizontal_padding vertical_padding spacing
· systray_background_id = integer : Which background to use.
· systray_sort = ascending/descending/left2right/right2left : Specifies the sorting
order for the icons in the systray: in ascending/descending alphabetical order of
the icon title, or always add icons to the right/left (note that with left2right
or right2left the order can be different on panel restart).
· systray_icon_size = max_icon_size : Set the maximum system tray icon size to
number. Set to 0 for automatic icon sizing.
· systray_icon_asb = alpha (0 to 100) saturation (-100 to 100) brightness (-100 to
100) : Adjust the systray icons color and transparency.
· systray_monitor = integer (1, 2, ...) or primary : On which monitor to draw the
systray. The first monitor is 1. (since 0.12)
· systray_name_filter = string : Regular expression to identify icon names to be
hidden. For example, ^audacious$ will hide icons with the exact name audacious,
while aud will hide any icons having aud in the name. (since 0.13.1)
Clock
· time1_format = %H:%M : The format used by the first line of the clock.
· time1_format, time2_format and clock_tooltip use the 'strftime' syntax. More
info can be found here: ⟨http://www.manpagez.com/man/3/strftime/⟩
· To hide the clock, comment time1_format and time2_format.
· time1_timezone = :US/Hawaii
· time1_timezone, time2_timezone and clock_tooltip_timezone can be used to
specify a timezone. If you do not specify a value the system-wide timezone is
used. The timezones can usually be found in /usr/share/zoneinfo. If your
timezones are in a different directory, you need to specify the absolute path,
e.g. time1_timezone = :/different/zoneinfo/dir/US/Hawaii Always prepend the
timezone with a ':'
· time1_font = [FAMILY-LIST] [STYLE-OPTIONS] [SIZE]
· time2_format = %A %d %B
· time2_timezone = :Europe/Berlin
· time2_font = [FAMILY-LIST] [STYLE-OPTIONS] [SIZE]
· clock_font_color = color opacity (0 to 100)
· clock_padding = horizontal_padding vertical_padding
· clock_background_id = integer : Which background to use
· clock_tooltip = %a, %d. %b %Y : Format for the clock's tooltip.
· clock_tooltip_timezone = :UTC
· clock_lclick_command = text : Command to execute on left click.
· clock_rclick_command = text : Command to execute on right click.
· clock_mclick_command = text : Command to execute on middle click. (since 0.12.1)
· clock_uwheel_command = text : Command to execute on wheel scroll up. (since
0.12.1)
· clock_dwheel_command = text : Command to execute on wheel scroll down. (since
0.12.1)
Tooltip
· tooltip_padding = horizontal_padding vertical_padding
· tooltip_show_timeout = float : Delay to show the tooltip in seconds. Use . as
decimal separator.
· tooltip_hide_timeout = float : Delay to hide the tooltip in seconds. Use . as
decimal separator.
· tooltip_background_id = integer : Which background to use for tooltips. Note that
with fake transparency the alpha channel and corner radius options are not
respected.
· tooltip_font_color = color opacity (0 to 100)
· tooltip_font = [FAMILY-LIST] [STYLE-OPTIONS] [SIZE]
Battery
· battery_hide = never/integer (0 to 100) : At what battery percentage the battery
item is hidden.
· battery_low_status = integer: At what battery percentage the low command is
executed.
· battery_low_cmd = xmessage 'tint2: Battery low!' : Command to execute when the
battery is low.
· battery_full_cmd = notify-send "battery full" : Command to execute when the
battery is full.
· bat1_font = [FAMILY-LIST] [STYLE-OPTIONS] [SIZE]
· bat2_font = [FAMILY-LIST] [STYLE-OPTIONS] [SIZE]
· battery_font_color = color opacity (0 to 100)
· bat1_format = FORMAT_STRING : Format for battery line 1. Default: %p. (since 1.0)
Format specification:
· %s: State (charging, discharging, full, unknown).
· %m: Minutes left until completely charged/discharged (estimated).
· %h: Hours left until completely charged/discharged (estimated).
· %t: Time left. Shows "hrs:mins" when charging/discharging, or "Ful\" when full.
· %p: Percentage. Includes the % sign.
· %P: Percentage. Without the % sign.
· bat2_format = FORMAT_STRING : Format for battery line 2. Default: %t. (since 1.0)
· battery_padding = horizontal_padding vertical_padding
· battery_background_id = integer : Which background to use for the battery.
· battery_tooltip_enabled = boolean (0 or 1) : Enable/disable battery tooltips.
(since 0.12.3)
· battery_lclick_command = text : Command to execute on left click. (since 0.12.1)
· battery_rclick_command = text : Command to execute on right click. (since 0.12.1)
· battery_mclick_command = text : Command to execute on middle click. (since
0.12.1)
· battery_uwheel_command = text : Command to execute on wheel scroll up. (since
0.12.1)
· battery_dwheel_command = text : Command to execute on wheel scroll down. (since
0.12.1)
· ac_connected_cmd = text : Command to execute when the power adapter is plugged
in. (since 0.12.3)
· ac_disconnected_cmd = text : Command to execute when the power adapter is
unplugged. (since 0.12.3)
Executor
· execp = new : Begins the configuration of a new executor plugin. Multiple such
plugins are supported; just use multiple Es in panel_items. (since 0.12.4)
· execp_command = text : Command to execute. (since 0.12.4)
· execp_interval = integer : The command is executed again after execp_interval
seconds from the moment it exits. If zero, the command is executed only once.
(since 0.12.4)
· execp_continuous = integer : If non-zero, the last execp_continuous lines from
the output of the command are displayed, every execp_continuous lines; this is
useful for showing the output of commands that run indefinitely, such as ping
127.0.0.1. If zero, the output of the command is displayed after it finishes
executing. (since 0.12.4)
· execp_has_icon = boolean (0 or 1) : If execp_has_icon = 1, the first line printed
by the command is interpreted as a path to an image file. (since 0.12.4)
· execp_cache_icon = boolean (0 or 1) : If execp_cache_icon = 0, the image is
reloaded each time the command is executed (useful if the image file is changed
on disk by the program executed by execp_command). (since 0.12.4)
· execp_icon_w = integer : You can use execp_icon_w and execp_icon_h to resize the
image. If one of them is zero/missing, the image is rescaled proportionally. If
both of them are zero/missing, the image is not rescaled. (since 0.12.4)
· execp_icon_h = integer : See execp_icon_w. (since 0.12.4)
· execp_tooltip = text : The tooltip. If left empty, no tooltip is displayed. If
missing, the standard error of the command is shown as a tooltip (an ANSI clear
screen sequence can reset the contents, bash: printf '\e[2J', C:
printf("\x1b[2J");). If the standard error is empty, the tooltip will show
information about the time when the command was last executed. (since 0.12.4)
· execp_font = [FAMILY-LIST] [STYLE-OPTIONS] [SIZE] : The font used to draw the
text. (since 0.12.4)
· execp_font_color = color opacity : The font color. (since 0.12.4)
· execp_markup = boolean (0 or 1) : If non-zero, the output of the command is
treated as Pango markup, which allows rich text formatting. The format is
documented here ⟨https://developer.gnome.org/pygtk/stable/pango-markup-
language.html⟩. Note that using this with commands that print data downloaded
from the Internet is a possible security risk. (since 0.12.4)
· execp_background_id = integer : Which background to use. (since 0.12.4)
· execp_centered = boolean (0 or 1) : Whether to center the text. (since 0.12.4)
· execp_padding = horizontal_padding vertical_padding spacing_between_icon_and_text
(since 0.12.4)
· execp_monitor = integer (1, 2, ...), primary or all : On which monitor to draw
the executor. The first monitor is 1. (since 17.0)
· execp_lclick_command = text : Command to execute on left click. If not defined,
execp_command is executed immediately, unless it is currently running. (since
0.12.4)
· execp_mclick_command = text : Command to execute on right click. If not defined,
execp_command is executed immediately, unless it is currently running. (since
0.12.4)
· execp_rclick_command = text : Command to execute on middle click. If not defined,
execp_command is executed immediately, unless it is currently running. (since
0.12.4)
· execp_uwheel_command = text : Command to execute on wheel scroll up. If not
defined, execp_command is executed immediately, unless it is currently running.
(since 0.12.4)
· execp_dwheel_command = text : Command to execute on wheel scroll down. If not
defined, execp_command is executed immediately, unless it is currently running.
(since 0.12.4)
Executor samples
Print the hostname
execp = new
execp_command = hostname
execp_interval = 0
Print disk usage for the root partition every 10 seconds
execp = new
execp_command = df -h | awk '/\/$/ { print $6 ": " $2 " " $5}'
execp_interval = 10
Button with icon and rich text, executes command when clicked
execp = new
execp_command = echo /usr/share/icons/elementary-xfce/emblems/24/emblem-colors-blue.png; echo '<span foreground="#7f7">Click</span> <span foreground="#77f">me</span> <span foreground="#f77">pls</span>'
execp_has_icon = 1
execp_interval = 0
execp_centered = 1
execp_font = sans 9
execp_markup = 1
execp_font_color = #aaffaa 100
execp_padding = 2 0
execp_tooltip = I will tell you a secret...
execp_lclick_command = zenity --info "--text=$(uname -sr)"
execp_background_id = 2
Desktop pager with text
execp = new
execp_command = xprop -root -spy | awk '/^_NET_CURRENT_DESKTOP/ { print "Workspace " ($3 + 1) ; fflush(); }'
execp_interval = 1
execp_continuous = 1
Desktop pager with icon
execp_command = xprop -root -spy | awk -v home="$HOME" '/^_NET_CURRENT_DESKTOP/ { print home "/.config/myPager/" ($3 + 1) ".png\n" ; fflush(); }'
execp_interval = 1
execp_has_icon = 1
execp_cache_icon = 1
execp_continuous = 2
Round-trip time to the gateway, refreshed every second
execp = new
execp_command = ping -i 1 -c 1 -W 1 -O -D -n $(ip route | grep default | grep via | grep -o '[0-9]*\.[0-9]*\.[0-9]*\.[0-9]*') | awk '/no/ { print "<span foreground=\"#faa\">timeout</span>"; fflush(); }; /time=/ { gsub(/time=/, "", $8); printf "<span foreground=\"#7af\">%3.0f %s</span>\n", $8, $9; fflush(); } '
execp_continuous = 0
execp_interval = 1
execp_markup = 1
Memory usage
# Note the use of "stdbuf -oL" to force the program to flush the output line by line.
execp = new
execp_command = free -b -s1 | stdbuf -oL awk '/^Mem:/ { printf "Mem: %s %.0f%%\n", $2, 100 * ($2 - $7) / $2 }' | stdbuf -oL numfmt --to=iec-i --field=2 -d' '
execp_interval = 1
execp_continuous = 1
Network load
execp = new
execp_command = stdbuf -oL bwm-ng -o csv -t 1000 | stdbuf -oL awk -F ';' '/total/ { printf "Net: %.0f Mb/s\n", ($5*8/1.0e6) }'
execp_continuous = 1
execp_interval = 1
Button
· button = new : Begins the configuration of a new button. Multiple such plugins
are supported; just use multiple Ps in panel_items. (since 0.14)
· button_icon = text : Name or path of icon (or empty). (since 0.14)
· button_text = text : Text to display (or empty). (since 0.14)
· button_tooltip = text : The tooltip (or empty). (since 0.14)
· button_font = [FAMILY-LIST] [STYLE-OPTIONS] [SIZE] : The font used to draw the
text. (since 0.14)
· button_font_color = color opacity : The font color. (since 0.14)
· button_background_id = integer : Which background to use. (since 0.14)
· button_centered = boolean (0 or 1) : Whether to center the text. (since 0.14)
· button_padding = horizontal_padding vertical_padding
spacing_between_icon_and_text (since 0.14)
· button_max_icon_size = integer : Sets a limit to the icon size. Otherwise, the
icon will expand to the edges. (since 0.14)
· button_lclick_command = text : Command to execute on left click. If not defined,
execp_command is executed immediately, unless it is currently running. (since
0.14)
· button_mclick_command = text : Command to execute on right click. If not defined,
execp_command is executed immediately, unless it is currently running. (since
0.14)
· button_rclick_command = text : Command to execute on middle click. If not
defined, execp_command is executed immediately, unless it is currently running.
(since 0.14)
· button_uwheel_command = text : Command to execute on wheel scroll up. If not
defined, execp_command is executed immediately, unless it is currently running.
(since 0.14)
· button_dwheel_command = text : Command to execute on wheel scroll down. If not
defined, execp_command is executed immediately, unless it is currently running.
(since 0.14)
Separator
· separator = new : Begins the configuration of a new separator. Multiple such
plugins are supported; just use multiple :s in panel_items. (since 0.13.0)
· separator_background_id = integer : Which background to use. (since 0.13.0)
· separator_color = color opacity : The foreground color. (since 0.13.0)
· separator_style = [empty | line | dots] : The separator style. (since 0.13.0)
· separator_size = integer : The thickness of the separator. Does not include the
border and padding. For example, if the style is line, this is the line
thickness; if the style is dots, this is the dot's diameter. (since 0.13.0)
· separator_padding = side_padding cap_padding : The padding to add to the sides of
the separator, in pixels. (since 0.13.0)
Example configuration
See /etc/xdg/tint2/tint2rc.
AUTHOR
tint2 was written by Thierry Lorthiois ⟨lorthiois@bbsoft.fr⟩. It is based on ttm,
originally written by Pål Staurland ⟨staura@gmail.com⟩.
This manual page was originally written by Daniel Moerner ⟨dmoerner@gmail.com⟩, for the
Debian project (but may be used by others). It was adopted from the tint2 docs.
SEE ALSO
The main website ⟨https://gitlab.com/o9000/tint2⟩ and the wiki page at
⟨https://gitlab.com/o9000/tint2/wikis/home⟩.
This documentation is also provided in HTML and Markdown format in the system's default
location for documentation files, usually /usr/share/doc/tint2 or
/usr/local/share/doc/tint2. . .