Provided by: erlang-manpages_24.2.1+dfsg-1ubuntu0.1_all 
NAME
fprof - A Time Profiling Tool using trace to file for minimal runtime performance impact.
DESCRIPTION
This module is used to profile a program to find out how the execution time is used. Trace to file is
used to minimize runtime performance impact.
The fprof module uses tracing to collect profiling data, hence there is no need for special compilation
of any module to be profiled. When it starts tracing, fprof will erase all previous tracing in the node
and set the necessary trace flags on the profiling target processes as well as local call trace on all
functions in all loaded modules and all modules to be loaded. fprof erases all tracing in the node when
it stops tracing.
fprof presents both own time i.e how much time a function has used for its own execution, and accumulated
time i.e including called functions. All presented times are collected using trace timestamps. fprof
tries to collect cpu time timestamps, if the host machine OS supports it. Therefore the times may be
wallclock times and OS scheduling will randomly strike all called functions in a presumably fair way.
If, however, the profiling time is short, and the host machine OS does not support high resolution cpu
time measurements, some few OS schedulings may show up as ridiculously long execution times for functions
doing practically nothing. An example of a function more or less just composing a tuple in about 100
times the normal execution time has been seen, and when the tracing was repeated, the execution time
became normal.
Profiling is essentially done in 3 steps:
1:
Tracing; to file, as mentioned in the previous paragraph. The trace contains entries for function
calls, returns to function, process scheduling, other process related (spawn, etc) events, and
garbage collection. All trace entries are timestamped.
2:
Profiling; the trace file is read, the execution call stack is simulated, and raw profile data is
calculated from the simulated call stack and the trace timestamps. The profile data is stored in the
fprof server state. During this step the trace data may be dumped in text format to file or console.
3:
Analysing; the raw profile data is sorted, filtered and dumped in text format either to file or
console. The text format intended to be both readable for a human reader, as well as parsable with
the standard erlang parsing tools.
Since fprof uses trace to file, the runtime performance degradation is minimized, but still far from
negligible, especially for programs that use the filesystem heavily by themselves. Where you place the
trace file is also important, e.g on Solaris /tmp is usually a good choice since it is essentially a RAM
disk, while any NFS (network) mounted disk is a bad idea.
fprof can also skip the file step and trace to a tracer process that does the profiling in runtime.
EXPORTS
start() -> {ok, Pid} | {error, {already_started, Pid}}
Types:
Pid = pid()
Starts the fprof server.
Note that it seldom needs to be started explicitly since it is automatically started by the
functions that need a running server.
stop() -> ok
Same as stop(normal).
stop(Reason) -> ok
Types:
Reason = term()
Stops the fprof server.
The supplied Reason becomes the exit reason for the server process. Default Any Reason other than
kill sends a request to the server and waits for it to clean up, reply and exit. If Reason is
kill, the server is bluntly killed.
If the fprof server is not running, this function returns immediately with the same return value.
Note:
When the fprof server is stopped the collected raw profile data is lost.
apply(Func, Args) -> term()
Types:
Func = function() | {Module :: module(), Function :: atom()}
Args = [term()]
Same as apply(Func, Args, []).
apply(Module, Function, Args) -> term()
Types:
Module = module()
Function = atom()
Args = [term()]
Same as apply({Module, Function}, Args, []).
apply(Func, Args, OptionList) -> term()
Types:
Func = function() | {Module :: module(), Function :: atom()}
Args = [term()]
OptionList = [Option]
Option = apply_option()
apply_option() =
continue |
{procs, PidList :: [pid()]} |
start |
(TraceStartOption :: trace_option())
trace_option() =
cpu_time |
{cpu_time, boolean()} |
file |
{file, Filename :: file:filename()} |
{procs, PidSpec :: pid_spec()} |
{procs, [PidSpec :: pid_spec()]} |
start | stop |
{tracer, Tracer :: pid() | port()} |
verbose |
{verbose, boolean()}
pid_spec() = pid() | atom()
Calls erlang:apply(Func, Args) surrounded by trace([start, ...]) and trace(stop).
Some effort is made to keep the trace clean from unnecessary trace messages; tracing is started
and stopped from a spawned process while the erlang:apply/2 call is made in the current process,
only surrounded by receive and send statements towards the trace starting process. The trace
starting process exits when not needed any more.
The TraceStartOption is any option allowed for trace/1. The options [start, {procs, [self() |
PidList]} | OptList] are given to trace/1, where OptList is OptionList with continue, start and
{procs, _} options removed.
The continue option inhibits the call to trace(stop) and leaves it up to the caller to stop
tracing at a suitable time.
apply(Module, Function, Args, OptionList) -> term()
Types:
Module = module()
Function = atom()
Args = [term()]
OptionList = [Option]
Option = apply_option()
apply_option() =
continue |
{procs, PidList :: [pid()]} |
start |
(TraceStartOption :: trace_option())
trace_option() =
cpu_time |
{cpu_time, boolean()} |
file |
{file, Filename :: file:filename()} |
{procs, PidSpec :: pid_spec()} |
{procs, [PidSpec :: pid_spec()]} |
start | stop |
{tracer, Tracer :: pid() | port()} |
verbose |
{verbose, boolean()}
pid_spec() = pid() | atom()
Same as apply({Module, Function}, Args, OptionList).
OptionList is an option list allowed for apply/3.
trace(OptionName :: start, Filename) ->
ok | {error, Reason} | {'EXIT', ServerPid, Reason}
Types:
Filename = file:filename()
ServerPid = pid()
Reason = term()
Same as trace([start, {file, Filename}]).
trace(OptionName :: verbose, Filename) ->
ok | {error, Reason} | {'EXIT', ServerPid, Reason}
Types:
Filename = file:filename()
ServerPid = pid()
Reason = term()
Same as trace([start, verbose, {file, Filename}]).
trace(OptionName, OptionValue) ->
ok | {error, Reason} | {'EXIT', ServerPid, Reason}
Types:
OptionName = atom()
OptionValue = term()
ServerPid = pid()
Reason = term()
Same as trace([{OptionName, OptionValue}]).
trace(Option :: verbose) ->
ok | {error, Reason} | {'EXIT', ServerPid, Reason}
Types:
ServerPid = pid()
Reason = term()
Same as trace([start, verbose]).
trace(OptionName) ->
ok | {error, Reason} | {'EXIT', ServerPid, Reason}
Types:
OptionName = atom()
ServerPid = pid()
Reason = term()
Same as trace([OptionName]).
trace(Option :: {OptionName, OptionValue}) ->
ok | {error, Reason} | {'EXIT', ServerPid, Reason}
Types:
OptionName = atom()
OptionValue = term()
ServerPid = pid()
Reason = term()
Same as trace([{OptionName, OptionValue}]).
trace(OptionList) ->
ok | {error, Reason} | {'EXIT', ServerPid, Reason}
Types:
OptionList = [Option]
Option = trace_option()
ServerPid = pid()
Reason = term()
trace_option() =
cpu_time |
{cpu_time, boolean()} |
file |
{file, Filename :: file:filename()} |
{procs, PidSpec :: pid_spec()} |
{procs, [PidSpec :: pid_spec()]} |
start | stop |
{tracer, Tracer :: pid() | port()} |
verbose |
{verbose, boolean()}
pid_spec() = pid() | atom()
Starts or stops tracing.
PidSpec and Tracer are used in calls to erlang:trace(PidSpec, true, [{tracer, Tracer} | Flags]),
and Filename is used to call dbg:trace_port(file, Filename). Please see erlang:trace/3 and
dbg:trace_port/2.
Option description:
stop:
Stops a running fprof trace and clears all tracing from the node. Either option stop or start
must be specified, but not both.
start:
Clears all tracing from the node and starts a new fprof trace. Either option start or stop
must be specified, but not both.
verbose | {verbose, boolean()}:
The options verbose or {verbose, true} adds some trace flags that fprof does not need, but
that may be interesting for general debugging purposes. This option is only allowed with the
start option.
cpu_time | {cpu_time, boolean()}:
The options cpu_time or {cpu_time, true} makes the timestamps in the trace be in CPU time
instead of wallclock time which is the default. This option is only allowed with the start
option.
Warning:
Getting correct values out of cpu_time can be difficult. The best way to get correct values is
to run using a single scheduler and bind that scheduler to a specific CPU, i.e. erl +S 1 +sbt
db.
{procs, PidSpec} | {procs, [PidSpec]}:
Specifies which processes that shall be traced. If this option is not given, the calling
process is traced. All processes spawned by the traced processes are also traced. This option
is only allowed with the start option.
file | {file, Filename}:
Specifies the filename of the trace. If the option file is given, or none of these options are
given, the file "fprof.trace" is used. This option is only allowed with the start option, but
not with the {tracer, Tracer} option.
{tracer, Tracer}:
Specifies that trace to process or port shall be done instead of trace to file. This option is
only allowed with the start option, but not with the {file, Filename} option.
profile() -> ok | {error, Reason} | {'EXIT', ServerPid, Reason}
Types:
ServerPid = pid()
Reason = term()
Same as profile([]).
profile(OptionName, OptionValue) ->
ok |
{ok, Tracer} |
{error, Reason} |
{'EXIT', ServerPid, Reason}
Types:
OptionName = atom()
OptionValue = term()
Tracer = ServerPid = pid()
Reason = term()
Same as profile([{OptionName, OptionValue}]).
profile(OptionName) ->
ok |
{ok, Tracer} |
{error, Reason} |
{'EXIT', ServerPid, Reason}
Types:
OptionName = atom()
Tracer = ServerPid = pid()
Reason = term()
Same as profile([OptionName]).
profile(Option :: {OptionName, OptionValue}) ->
ok |
{ok, Tracer} |
{error, Reason} |
{'EXIT', ServerPid, Reason}
Types:
OptionName = atom()
OptionValue = term()
Tracer = ServerPid = pid()
Reason = term()
Same as profile([{OptionName, OptionValue}]).
profile(OptionList) ->
ok |
{ok, Tracer} |
{error, Reason} |
{'EXIT', ServerPid, Reason}
Types:
OptionList = [Option]
Option = profile_option()
Tracer = ServerPid = pid()
Reason = term()
profile_option() =
append | dump |
{dump, pid() | (Dump :: (Dumpfile :: file:filename() | []))} |
file |
{file, Filename :: file:filename()} |
start | stop
Compiles a trace into raw profile data held by the fprof server.
Dumpfile is used to call file:open/2, and Filename is used to call dbg:trace_port(file, Filename).
Please see file:open/2 and dbg:trace_port/2.
Option description:
file | {file, Filename}:
Reads the file Filename and creates raw profile data that is stored in RAM by the fprof
server. If the option file is given, or none of these options are given, the file
"fprof.trace" is read. The call will return when the whole trace has been read with the return
value ok if successful. This option is not allowed with the start or stop options.
dump | {dump, Dump}:
Specifies the destination for the trace text dump. If this option is not given, no dump is
generated, if it is dump the destination will be the caller's group leader, otherwise the
destination Dump is either the pid of an I/O device or a filename. And, finally, if the
filename is [] - "fprof.dump" is used instead. This option is not allowed with the stop
option.
append:
Causes the trace text dump to be appended to the destination file. This option is only allowed
with the {dump, Dumpfile} option.
start:
Starts a tracer process that profiles trace data in runtime. The call will return immediately
with the return value {ok, Tracer} if successful. This option is not allowed with the stop,
file or {file, Filename} options.
stop:
Stops the tracer process that profiles trace data in runtime. The return value will be value
ok if successful. This option is not allowed with the start, file or {file, Filename} options.
analyse() -> ok | {error, Reason} | {'EXIT', ServerPid, Reason}
Types:
ServerPid = pid()
Reason = term()
Same as analyse([]).
analyse(OptionName, OptionValue) ->
ok | {error, Reason} | {'EXIT', ServerPid, Reason}
Types:
OptionName = atom()
OptionValue = term()
ServerPid = pid()
Reason = term()
Same as analyse([{OptionName, OptionValue}]).
analyse(OptionName) ->
ok | {error, Reason} | {'EXIT', ServerPid, Reason}
Types:
OptionName = atom()
ServerPid = pid()
Reason = term()
Same as analyse([OptionName]).
analyse(Option :: {OptionName, OptionValue}) ->
ok | {error, Reason} | {'EXIT', ServerPid, Reason}
Types:
OptionName = atom()
OptionValue = term()
ServerPid = pid()
Reason = term()
Same as analyse([{OptionName, OptionValue}]).
analyse(OptionList) ->
ok | {error, Reason} | {'EXIT', ServerPid, Reason}
Types:
OptionList = [Option]
Option = analyse_option()
ServerPid = pid()
Reason = term()
analyse_option() =
append | callers |
{callers, boolean()} |
{cols, Cols :: integer() >= 0} |
dest |
{dest, Dest :: pid() | (Destfile :: file:filename())} |
details |
{details, boolean()} |
no_callers | no_details |
{sort, SortSpec :: acc | own} |
totals |
{totals, boolean()}
Analyses raw profile data in the fprof server. If called while there is no raw profile data
available, {error, no_profile} is returned.
Destfile is used to call file:open/2.
Option description:
dest | {dest, Dest}:
Specifies the destination for the analysis. If this option is not given or it is dest, the
destination will be the caller's group leader, otherwise the destination Dest is either the
pid() of an I/O device or a filename. And, finally, if the filename is [] - "fprof.analysis"
is used instead.
append:
Causes the analysis to be appended to the destination file. This option is only allowed with
the {dest, Destfile} option.
{cols, Cols}:
Specifies the number of columns in the analysis text. If this option is not given the number
of columns is set to 80.
callers | {callers, true}:
Prints callers and called information in the analysis. This is the default.
{callers, false} | no_callers:
Suppresses the printing of callers and called information in the analysis.
{sort, SortSpec}:
Specifies if the analysis should be sorted according to the ACC column, which is the default,
or the OWN column. See Analysis Format below.
totals | {totals, true}:
Includes a section containing call statistics for all calls regardless of process, in the
analysis.
{totals, false}:
Supresses the totals section in the analysis, which is the default.
details | {details, true}:
Prints call statistics for each process in the analysis. This is the default.
{details, false} | no_details:
Suppresses the call statistics for each process from the analysis.
ANALYSIS FORMAT
This section describes the output format of the analyse command. See analyse/0.
The format is parsable with the standard Erlang parsing tools erl_scan and erl_parse, file:consult/1 or
io:read/2. The parse format is not explained here - it should be easy for the interested to try it out.
Note that some flags to analyse/1 will affect the format.
The following example was run on OTP/R8 on Solaris 8, all OTP internals in this example are very version
dependent.
As an example, we will use the following function, that you may recognise as a slightly modified
benchmark function from the manpage file(3erl):
-module(foo).
-export([create_file_slow/2]).
create_file_slow(Name, N) when is_integer(N), N >= 0 ->
{ok, FD} =
file:open(Name, [raw, write, delayed_write, binary]),
if N > 256 ->
ok = file:write(FD,
lists:map(fun (X) -> <<X:32/unsigned>> end,
lists:seq(0, 255))),
ok = create_file_slow(FD, 256, N);
true ->
ok = create_file_slow(FD, 0, N)
end,
ok = file:close(FD).
create_file_slow(FD, M, M) ->
ok;
create_file_slow(FD, M, N) ->
ok = file:write(FD, <<M:32/unsigned>>),
create_file_slow(FD, M+1, N).
Let us have a look at the printout after running:
1> fprof:apply(foo, create_file_slow, [junk, 1024]).
2> fprof:profile().
3> fprof:analyse().
The printout starts with:
%% Analysis results:
{ analysis_options,
[{callers, true},
{sort, acc},
{totals, false},
{details, true}]}.
% CNT ACC OWN
[{ totals, 9627, 1691.119, 1659.074}]. %%%
The CNT column shows the total number of function calls that was found in the trace. In the ACC column is
the total time of the trace from first timestamp to last. And in the OWN column is the sum of the
execution time in functions found in the trace, not including called functions. In this case it is very
close to the ACC time since the emulator had practically nothing else to do than to execute our test
program.
All time values in the printout are in milliseconds.
The printout continues:
% CNT ACC OWN
[{ "<0.28.0>", 9627,undefined, 1659.074}]. %%
This is the printout header of one process. The printout contains only this one process since we did
fprof:apply/3 which traces only the current process. Therefore the CNT and OWN columns perfectly matches
the totals above. The ACC column is undefined since summing the ACC times of all calls in the process
makes no sense - you would get something like the ACC value from totals above multiplied by the average
depth of the call stack, or something.
All paragraphs up to the next process header only concerns function calls within this process.
Now we come to something more interesting:
{[{undefined, 0, 1691.076, 0.030}],
{ {fprof,apply_start_stop,4}, 0, 1691.076, 0.030}, %
[{{foo,create_file_slow,2}, 1, 1691.046, 0.103},
{suspend, 1, 0.000, 0.000}]}.
{[{{fprof,apply_start_stop,4}, 1, 1691.046, 0.103}],
{ {foo,create_file_slow,2}, 1, 1691.046, 0.103}, %
[{{file,close,1}, 1, 1398.873, 0.019},
{{foo,create_file_slow,3}, 1, 249.678, 0.029},
{{file,open,2}, 1, 20.778, 0.055},
{{lists,map,2}, 1, 16.590, 0.043},
{{lists,seq,2}, 1, 4.708, 0.017},
{{file,write,2}, 1, 0.316, 0.021}]}.
The printout consists of one paragraph per called function. The function marked with '%' is the one the
paragraph concerns - foo:create_file_slow/2. Above the marked function are the calling functions - those
that has called the marked, and below are those called by the marked function.
The paragraphs are per default sorted in decreasing order of the ACC column for the marked function. The
calling list and called list within one paragraph are also per default sorted in decreasing order of
their ACC column.
The columns are: CNT - the number of times the function has been called, ACC - the time spent in the
function including called functions, and OWN - the time spent in the function not including called
functions.
The rows for the calling functions contain statistics for the marked function with the constraint that
only the occasions when a call was made from the row's function to the marked function are accounted for.
The row for the marked function simply contains the sum of all calling rows.
The rows for the called functions contains statistics for the row's function with the constraint that
only the occasions when a call was made from the marked to the row's function are accounted for.
So, we see that foo:create_file_slow/2 used very little time for its own execution. It spent most of its
time in file:close/1. The function foo:create_file_slow/3 that writes 3/4 of the file contents is the
second biggest time thief.
We also see that the call to file:write/2 that writes 1/4 of the file contents takes very little time in
itself. What takes time is to build the data (lists:seq/2 and lists:map/2).
The function 'undefined' that has called fprof:apply_start_stop/4 is an unknown function because that
call was not recorded in the trace. It was only recorded that the execution returned from
fprof:apply_start_stop/4 to some other function above in the call stack, or that the process exited from
there.
Let us continue down the printout to find:
{[{{foo,create_file_slow,2}, 1, 249.678, 0.029},
{{foo,create_file_slow,3}, 768, 0.000, 23.294}],
{ {foo,create_file_slow,3}, 769, 249.678, 23.323}, %
[{{file,write,2}, 768, 220.314, 14.539},
{suspend, 57, 6.041, 0.000},
{{foo,create_file_slow,3}, 768, 0.000, 23.294}]}.
If you compare with the code you will see there also that foo:create_file_slow/3 was called only from
foo:create_file_slow/2 and itself, and called only file:write/2, note the number of calls to
file:write/2. But here we see that suspend was called a few times. This is a pseudo function that
indicates that the process was suspended while executing in foo:create_file_slow/3, and since there is no
receive or erlang:yield/0 in the code, it must be Erlang scheduling suspensions, or the trace file driver
compensating for large file write operations (these are regarded as a schedule out followed by a schedule
in to the same process).
Let us find the suspend entry:
{[{{file,write,2}, 53, 6.281, 0.000},
{{foo,create_file_slow,3}, 57, 6.041, 0.000},
{{prim_file,drv_command,4}, 50, 4.582, 0.000},
{{prim_file,drv_get_response,1}, 34, 2.986, 0.000},
{{lists,map,2}, 10, 2.104, 0.000},
{{prim_file,write,2}, 17, 1.852, 0.000},
{{erlang,port_command,2}, 15, 1.713, 0.000},
{{prim_file,drv_command,2}, 22, 1.482, 0.000},
{{prim_file,translate_response,2}, 11, 1.441, 0.000},
{{prim_file,'-drv_command/2-fun-0-',1}, 15, 1.340, 0.000},
{{lists,seq,4}, 3, 0.880, 0.000},
{{foo,'-create_file_slow/2-fun-0-',1}, 5, 0.523, 0.000},
{{erlang,bump_reductions,1}, 4, 0.503, 0.000},
{{prim_file,open_int_setopts,3}, 1, 0.165, 0.000},
{{prim_file,i32,4}, 1, 0.109, 0.000},
{{fprof,apply_start_stop,4}, 1, 0.000, 0.000}],
{ suspend, 299, 32.002, 0.000}, %
[ ]}.
We find no particulary long suspend times, so no function seems to have waited in a receive statement.
Actually, prim_file:drv_command/4 contains a receive statement, but in this test program, the message
lies in the process receive buffer when the receive statement is entered. We also see that the total
suspend time for the test run is small.
The suspend pseudo function has got an OWN time of zero. This is to prevent the process total OWN time
from including time in suspension. Whether suspend time is really ACC or OWN time is more of a
philosophical question.
Now we look at another interesting pseudo function, garbage_collect:
{[{{prim_file,drv_command,4}, 25, 0.873, 0.873},
{{prim_file,write,2}, 16, 0.692, 0.692},
{{lists,map,2}, 2, 0.195, 0.195}],
{ garbage_collect, 43, 1.760, 1.760}, %
[ ]}.
Here we see that no function distinguishes itself considerably, which is very normal.
The garbage_collect pseudo function has not got an OWN time of zero like suspend, instead it is equal to
the ACC time.
Garbage collect often occurs while a process is suspended, but fprof hides this fact by pretending that
the suspended function was first unsuspended and then garbage collected. Otherwise the printout would
show garbage_collect being called from suspend but not which function that might have caused the garbage
collection.
Let us now get back to the test code:
{[{{foo,create_file_slow,3}, 768, 220.314, 14.539},
{{foo,create_file_slow,2}, 1, 0.316, 0.021}],
{ {file,write,2}, 769, 220.630, 14.560}, %
[{{prim_file,write,2}, 769, 199.789, 22.573},
{suspend, 53, 6.281, 0.000}]}.
Not unexpectedly, we see that file:write/2 was called from foo:create_file_slow/3 and
foo:create_file_slow/2. The number of calls in each case as well as the used time are also just confirms
the previous results.
We see that file:write/2 only calls prim_file:write/2, but let us refrain from digging into the internals
of the kernel application.
But, if we nevertheless do dig down we find the call to the linked in driver that does the file
operations towards the host operating system:
{[{{prim_file,drv_command,4}, 772, 1458.356, 1456.643}],
{ {erlang,port_command,2}, 772, 1458.356, 1456.643}, %
[{suspend, 15, 1.713, 0.000}]}.
This is 86 % of the total run time, and as we saw before it is the close operation the absolutely biggest
contributor. We find a comparison ratio a little bit up in the call stack:
{[{{prim_file,close,1}, 1, 1398.748, 0.024},
{{prim_file,write,2}, 769, 174.672, 12.810},
{{prim_file,open_int,4}, 1, 19.755, 0.017},
{{prim_file,open_int_setopts,3}, 1, 0.147, 0.016}],
{ {prim_file,drv_command,2}, 772, 1593.322, 12.867}, %
[{{prim_file,drv_command,4}, 772, 1578.973, 27.265},
{suspend, 22, 1.482, 0.000}]}.
The time for file operations in the linked in driver distributes itself as 1 % for open, 11 % for write
and 87 % for close. All data is probably buffered in the operating system until the close.
The unsleeping reader may notice that the ACC times for prim_file:drv_command/2 and
prim_file:drv_command/4 is not equal between the paragraphs above, even though it is easy to believe that
prim_file:drv_command/2 is just a passthrough function.
The missing time can be found in the paragraph for prim_file:drv_command/4 where it is evident that not
only prim_file:drv_command/2 is called but also a fun:
{[{{prim_file,drv_command,2}, 772, 1578.973, 27.265}],
{ {prim_file,drv_command,4}, 772, 1578.973, 27.265}, %
[{{erlang,port_command,2}, 772, 1458.356, 1456.643},
{{prim_file,'-drv_command/2-fun-0-',1}, 772, 87.897, 12.736},
{suspend, 50, 4.582, 0.000},
{garbage_collect, 25, 0.873, 0.873}]}.
And some more missing time can be explained by the fact that prim_file:open_int/4 both calls
prim_file:drv_command/2 directly as well as through prim_file:open_int_setopts/3, which complicates the
picture.
{[{{prim_file,open,2}, 1, 20.309, 0.029},
{{prim_file,open_int,4}, 1, 0.000, 0.057}],
{ {prim_file,open_int,4}, 2, 20.309, 0.086}, %
[{{prim_file,drv_command,2}, 1, 19.755, 0.017},
{{prim_file,open_int_setopts,3}, 1, 0.360, 0.032},
{{prim_file,drv_open,2}, 1, 0.071, 0.030},
{{erlang,list_to_binary,1}, 1, 0.020, 0.020},
{{prim_file,i32,1}, 1, 0.017, 0.017},
{{prim_file,open_int,4}, 1, 0.000, 0.057}]}.
{[{{prim_file,open_int,4}, 1, 0.360, 0.032},
{{prim_file,open_int_setopts,3}, 1, 0.000, 0.016}],
{ {prim_file,open_int_setopts,3}, 2, 0.360, 0.048}, %
[{suspend, 1, 0.165, 0.000},
{{prim_file,drv_command,2}, 1, 0.147, 0.016},
{{prim_file,open_int_setopts,3}, 1, 0.000, 0.016}]}.
NOTES
The actual supervision of execution times is in itself a CPU intensive activity. A message is written on
the trace file for every function call that is made by the profiled code.
The ACC time calculation is sometimes difficult to make correct, since it is difficult to define. This
happens especially when a function occurs in several instances in the call stack, for example by calling
itself perhaps through other functions and perhaps even non-tail recursively.
To produce sensible results, fprof tries not to charge any function more than once for ACC time. The
instance highest up (with longest duration) in the call stack is chosen.
Sometimes a function may unexpectedly waste a lot (some 10 ms or more depending on host machine OS) of
OWN (and ACC) time, even functions that do practically nothing at all. The problem may be that the OS has
chosen to schedule out the Erlang runtime system process for a while, and if the OS does not support high
resolution cpu time measurements fprof will use wallclock time for its calculations, and it will appear
as functions randomly burn virtual machine time.
SEE ALSO
dbg(3erl), eprof(3erl), erlang(3erl), io(3erl), Tools User's Guide