Provided by: opengl-4-man-doc_1.0~svn33624-1_all 
NAME
glStencilOpSeparate - set front and/or back stencil test actions
C SPECIFICATION
void glStencilOpSeparate(GLenum face, GLenum sfail, GLenum dpfail, GLenum dppass);
PARAMETERS
face
Specifies whether front and/or back stencil state is updated. Three symbolic constants are valid:
GL_FRONT, GL_BACK, and GL_FRONT_AND_BACK.
sfail
Specifies the action to take when the stencil test fails. Eight symbolic constants are accepted:
GL_KEEP, GL_ZERO, GL_REPLACE, GL_INCR, GL_INCR_WRAP, GL_DECR, GL_DECR_WRAP, and GL_INVERT. The
initial value is GL_KEEP.
dpfail
Specifies the stencil action when the stencil test passes, but the depth test fails. dpfail accepts
the same symbolic constants as sfail. The initial value is GL_KEEP.
dppass
Specifies the stencil action when both the stencil test and the depth test pass, or when the stencil
test passes and either there is no depth buffer or depth testing is not enabled. dppass accepts the
same symbolic constants as sfail. The initial value is GL_KEEP.
DESCRIPTION
Stenciling, like depth-buffering, enables and disables drawing on a per-pixel basis. You draw into the
stencil planes using GL drawing primitives, then render geometry and images, using the stencil planes to
mask out portions of the screen. Stenciling is typically used in multipass rendering algorithms to
achieve special effects, such as decals, outlining, and constructive solid geometry rendering.
The stencil test conditionally eliminates a pixel based on the outcome of a comparison between the value
in the stencil buffer and a reference value. To enable and disable the test, call glEnable() and
glDisable with argument GL_STENCIL_TEST; to control it, call glStencilFunc() or glStencilFuncSeparate().
There can be two separate sets of sfail, dpfail, and dppass parameters; one affects back-facing polygons,
and the other affects front-facing polygons as well as other non-polygon primitives. glStencilOp() sets
both front and back stencil state to the same values, as if glStencilOpSeparate() were called with face
set to GL_FRONT_AND_BACK.
glStencilOpSeparate takes three arguments that indicate what happens to the stored stencil value while
stenciling is enabled. If the stencil test fails, no change is made to the pixel's color or depth
buffers, and sfail specifies what happens to the stencil buffer contents. The following eight actions are
possible.
GL_KEEP
Keeps the current value.
GL_ZERO
Sets the stencil buffer value to 0.
GL_REPLACE
Sets the stencil buffer value to ref, as specified by glStencilFunc().
GL_INCR
Increments the current stencil buffer value. Clamps to the maximum representable unsigned value.
GL_INCR_WRAP
Increments the current stencil buffer value. Wraps stencil buffer value to zero when incrementing the
maximum representable unsigned value.
GL_DECR
Decrements the current stencil buffer value. Clamps to 0.
GL_DECR_WRAP
Decrements the current stencil buffer value. Wraps stencil buffer value to the maximum representable
unsigned value when decrementing a stencil buffer value of zero.
GL_INVERT
Bitwise inverts the current stencil buffer value.
Stencil buffer values are treated as unsigned integers. When incremented and decremented, values are
clamped to 0 and 2 n - 1, where n is the value returned by querying GL_STENCIL_BITS.
The other two arguments to glStencilOpSeparate specify stencil buffer actions that depend on whether
subsequent depth buffer tests succeed (dppass) or fail (dpfail) (see glDepthFunc()). The actions are
specified using the same eight symbolic constants as sfail. Note that dpfail is ignored when there is no
depth buffer, or when the depth buffer is not enabled. In these cases, sfail and dppass specify stencil
action when the stencil test fails and passes, respectively.
NOTES
Initially the stencil test is disabled. If there is no stencil buffer, no stencil modification can occur
and it is as if the stencil test always passes.
ERRORS
GL_INVALID_ENUM is generated if face is any value other than GL_FRONT, GL_BACK, or GL_FRONT_AND_BACK.
GL_INVALID_ENUM is generated if sfail, dpfail, or dppass is any value other than the eight defined
constant values.
ASSOCIATED GETS
glGet() with argument GL_STENCIL_FAIL, GL_STENCIL_PASS_DEPTH_PASS, GL_STENCIL_PASS_DEPTH_FAIL,
GL_STENCIL_BACK_FAIL, GL_STENCIL_BACK_PASS_DEPTH_PASS, GL_STENCIL_BACK_PASS_DEPTH_FAIL, or
GL_STENCIL_BITS
glIsEnabled() with argument GL_STENCIL_TEST
VERSION SUPPORT
┌─────────────────────┬───────────────────────────────────────────────────────────────────────┐
│ │ OpenGL Version │
├─────────────────────┼─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┤
│ Function │ 2.0 │ 2.1 │ 3.0 │ 3.1 │ 3.2 │ 3.3 │ 4.0 │ 4.1 │ 4.2 │ 4.3 │ 4.4 │ 4.5 │
│ / │ │ │ │ │ │ │ │ │ │ │ │ │
│ Feature │ │ │ │ │ │ │ │ │ │ │ │ │
│ Name │ │ │ │ │ │ │ │ │ │ │ │ │
├─────────────────────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
│ glStencilOpSeparate │ ✔ │ ✔ │ ✔ │ ✔ │ ✔ │ ✔ │ ✔ │ ✔ │ ✔ │ ✔ │ ✔ │ ✔ │
└─────────────────────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
SEE ALSO
glBlendFunc(), glDepthFunc(), glEnable(), glLogicOp(), glStencilFunc(), glStencilFuncSeparate(),
glStencilMask(), glStencilMaskSeparate(), glStencilOp()
COPYRIGHT
Copyright © 2006 Khronos Group. This material may be distributed subject to the terms and conditions set
forth in the Open Publication License, v 1.0, 8 June 1999. http://opencontent.org/openpub/.
COPYRIGHT
Copyright © 1991-2006 Silicon Graphics, Inc.
[FIXME: source] 01/03/2018 GLSTENCILOPSEPARATE(3G)