Ubuntu Manpage: networkd.conf, networkd.conf.d - Global Network configuration files

Provided by: systemd_249.11-0ubuntu3.17_amd64

NAME

       networkd.conf, networkd.conf.d - Global Network configuration files

SYNOPSIS

       /etc/systemd/networkd.conf

       /etc/systemd/networkd.conf.d/*.conf

       /lib/systemd/networkd.conf.d/*.conf

DESCRIPTION

       These configuration files control global network parameters. Currently the DHCP Unique Identifier (DUID).

CONFIGURATION DIRECTORIES AND PRECEDENCE

The default configuration is set during compilation, so configuration is only needed when it is necessary
to deviate from those defaults. Initially, the main configuration file in /etc/systemd/ contains
commented out entries showing the defaults as a guide to the administrator. Local overrides can be
created by editing this file or by creating drop-ins, as described below. Using drop-ins for local
configuration is recommended over modifications to the main configuration file.

In addition to the "main" configuration file, drop-in configuration snippets are read from
/usr/lib/systemd/*.conf.d/, /usr/local/lib/systemd/*.conf.d/, and /etc/systemd/*.conf.d/. Those drop-ins
have higher precedence and override the main configuration file. Files in the *.conf.d/ configuration
subdirectories are sorted by their filename in lexicographic order, regardless of in which of the
subdirectories they reside. When multiple files specify the same option, for options which accept just a
single value, the entry in the file sorted last takes precedence, and for options which accept a list of
values, entries are collected as they occur in the sorted files.

When packages need to customize the configuration, they can install drop-ins under /usr/. Files in /etc/
are reserved for the local administrator, who may use this logic to override the configuration files
installed by vendor packages. Drop-ins have to be used to override package drop-ins, since the main
configuration file has lower precedence. It is recommended to prefix all filenames in those
subdirectories with a two-digit number and a dash, to simplify the ordering of the files.

To disable a configuration file supplied by the vendor, the recommended way is to place a symlink to
/dev/null in the configuration directory in /etc/, with the same filename as the vendor configuration
file.

[NETWORK] SECTION OPTIONS

The following options are available in the [Network] section:

SpeedMeter=
Takes a boolean. If set to yes, then systemd-networkd measures the traffic of each interface, and
networkctl status INTERFACE shows the measured speed. Defaults to no.

SpeedMeterIntervalSec=
Specifies the time interval to calculate the traffic speed of each interface. If SpeedMeter=no, the
value is ignored. Defaults to 10sec.

ManageForeignRoutingPolicyRules=
A boolean. When true, systemd-networkd will remove rules that are not configured in .network files
(except for rules with protocol "kernel"). When false, it will not remove any foreign rules, keeping
them even if they are not configured in a .network file. Defaults to yes.

ManageForeignRoutes=
A boolean. When true, systemd-networkd will remove routes that are not configured in .network files
(except for routes with protocol "kernel", "dhcp" when KeepConfiguration= is true or "dhcp", and
"static" when KeepConfiguration= is true or "static"). When false, it will not remove any foreign
routes, keeping them even if they are not configured in a .network file. Defaults to yes.

RouteTable=
Defines the route table name. Takes a whitespace-separated list of the pairs of route table name and
number. The route table name and number in each pair are separated with a colon, i.e., "name:number".
The route table name must not be "default", "main", or "local", as these route table names are
predefined with route table number 253, 254, and 255, respectively. The route table number must be an
integer in the range 1...4294967295. This setting can be specified multiple times. If an empty string
is specified, then the list specified earlier are cleared. Defaults to unset.

[DHCPV4] SECTION OPTIONS

       This section configures the DHCP Unique Identifier (DUID) value used by DHCP protocol. DHCPv4 client
       protocol sends IAID and DUID to the DHCP server when acquiring a dynamic IPv4 address if
       ClientIdentifier=duid. IAID and DUID allows a DHCP server to uniquely identify the machine and the
       interface requesting a DHCP IP address. To configure IAID and ClientIdentifier, see systemd.network(5).

       The following options are understood:

       DUIDType=
           Specifies how the DUID should be generated. See RFC 3315[1] for a description of all the options.

           The following values are understood:

           vendor
               If "DUIDType=vendor", then the DUID value will be generated using "43793" as the vendor
               identifier (systemd) and hashed contents of machine-id(5). This is the default if DUIDType= is
               not specified.

           uuid
               If "DUIDType=uuid", and DUIDRawData= is not set, then the product UUID is used as a DUID value.
               If a system does not have valid product UUID, then an application-specific machine-id(5) is used
               as a DUID value. About the application-specific machine ID, see
               sd_id128_get_machine_app_specific(3).

           link-layer-time[:TIME], link-layer
               If "link-layer-time" or "link-layer" is specified, then the MAC address of the interface is used
               as a DUID value. The value "link-layer-time" can take additional time value after a colon, e.g.
               "link-layer-time:2018-01-23 12:34:56 UTC". The default time value is "2000-01-01 00:00:00 UTC".

           In all cases, DUIDRawData= can be used to override the actual DUID value that is used.

       DUIDRawData=
           Specifies the DHCP DUID value as a single newline-terminated, hexadecimal string, with each byte
           separated by ":". The DUID that is sent is composed of the DUID type specified by DUIDType= and the
           value configured here.

           The DUID value specified here overrides the DUID that systemd-networkd.service(8) generates from the
           machine ID. To configure DUID per-network, see systemd.network(5). The configured DHCP DUID should
           conform to the specification in RFC 3315[2], RFC 6355[3]. To configure IAID, see systemd.network(5).

           Example 1. A DUIDType=vendor with a custom value

               DUIDType=vendor
               DUIDRawData=00:00:ab:11:f9:2a:c2:77:29:f9:5c:00

           This specifies a 14 byte DUID, with the type DUID-EN ("00:02"), enterprise number 43793
           ("00:00:ab:11"), and identifier value "f9:2a:c2:77:29:f9:5c:00".

[DHCPV6] SECTION OPTIONS

       This section configures the DHCP Unique Identifier (DUID) value used by DHCPv6 protocol. DHCPv6 client
       protocol sends the DHCP Unique Identifier and the interface Identity Association Identifier (IAID) to a
       DHCPv6 server when acquiring a dynamic IPv6 address. IAID and DUID allows a DHCPv6 server to uniquely
       identify the machine and the interface requesting a DHCP IP address. To configure IAID, see
       systemd.network(5).

       The following options are understood:

       DUIDType=, DUIDRawData=
           As in the [DHCPv4] section.

NOTES

        1. RFC 3315
           https://tools.ietf.org/html/rfc3315#section-9

        2. RFC 3315
           http://tools.ietf.org/html/rfc3315#section-9

        3. RFC 6355
           http://tools.ietf.org/html/rfc6355

systemd 249                                                                                     NETWORKD.CONF(5)