Provided by: openresolv_3.12.0-2_all 
NAME
resolvconf.conf — resolvconf configuration file
DESCRIPTION
resolvconf.conf is the configuration file for resolvconf(8). The resolvconf.conf file is a
shell script that is sourced by resolvconf(8), meaning that resolvconf.conf must contain
valid shell commands. Listed below are the standard resolvconf.conf variables that may be
set. If the values contain whitespace, wildcards or other special shell characters, ensure
they are quoted and escaped correctly. See the replace variable for an example on quoting.
After updating this file, you may wish to run resolvconf -u to apply the new configuration.
When a dynamically generated list is appended or prepended to, the whole is made unique
where left-most wins.
RESOLVCONF OPTIONS
resolvconf
Set to NO to disable resolvconf from running any subscribers. Defaults to YES.
allow_interfaces
If set, only these interfaces will be processed.
deny_interfaces
If set, these interfaces will not be processed.
interface_order
These interfaces will always be processed first. If unset, defaults to the
following:
lo lo[0-9]*
dynamic_order
These interfaces will be processed next, unless they have a metric. If unset,
defaults to the following:
tap[0-9]* tun[0-9]* vpn vpn[0-9]* wg[0-9]* ppp[0-9]* ippp[0-9]*
inclusive_interfaces
Ignore any exclusive marking for these interfaces. This is handy when 3rd party
integrations force the resolvconf -x option and you want to disable it easily.
local_nameservers
If unset, defaults to the following:
127.* 0.0.0.0 255.255.255.255 ::1
search_domains
Prepend search domains to the dynamically generated list.
search_domains_append
Append search domains to the dynamically generated list.
domain_blacklist
A list of domains to be removed from consideration. To remove a domain, you can use
foo.* To remove a sub domain, you can use *.bar
name_servers
Prepend name servers to the dynamically generated list. You should set this to
127.0.0.1 if you use a local name server other than libc.
name_servers_append
Append name servers to the dynamically generated list.
name_server_blacklist
A list of name servers to be removed from consideration. The default is 0.0.0.0 as
some faulty routers send it via DHCP. To remove a block, you can use 192.168.*
private_interfaces
These interfaces name servers will only be queried for the domains listed in their
resolv.conf. Useful for VPN domains. Setting private_interfaces="*" will stop the
forwarding of the root zone and allows the local resolver to recursively query the
root servers directly. Requires a local nameserver other than libc. This is
equivalent to the resolvconf -p option.
public_interfaces
Force these interface to be public, overriding the private marking. This is handy
when 3rd party integrations force the resolvconf -p option and you want to disable
it easily.
replace
Is a space separated list of replacement keywords. The syntax is this:
$keyword/$match/$replacement
Example, given this resolv.conf:
domain foo.org
search foo.org dead.beef
nameserver 1.2.3.4
nameserver 2.3.4.5
and this configuration:
replace="search/foo*/bar.com"
replace="$replace nameserver/1.2.3.4/5.6.7.8"
replace="$replace nameserver/2.3.4.5/"
you would get this resolv.conf instead:
domain foo.org
search bar.com
nameserver 5.6.7.8
replace_sub
Works the same way as replace except it works on each space separated value rather
than the whole line, so it's useful for the replacing a single domain within the
search directive. Using the same example resolv.conf and changing replace to
replace_sub, you would get this resolv.conf instead:
domain foo.org
search bar.com dead.beef
nameserver 5.6.7.8
state_dir
Override the default state directory of /run/resolvconf. This should not be changed
once resolvconf is in use unless the old directory is copied to the new one.
LIBC OPTIONS
The following variables affect resolv.conf(5) directly:-
resolv_conf
Defaults to /etc/resolv.conf if not set.
resolv_conf_options
A list of libc resolver options, as specified in resolv.conf(5).
resolv_conf_passthrough
When set to YES the latest resolv.conf is written to resolv_conf without any
alteration. When set to /dev/null or NULL, resolv_conf_local_only is defaulted to
NO, local_nameservers is unset unless overridden and only the information set in
resolvconf.conf is written to resolv_conf.
resolv_conf_sortlist
A libc resolver sortlist, as specified in resolv.conf(5).
resolv_conf_local_only
If a local name server is configured then the default is just to specify that and
ignore all other entries as they will be configured for the local name server. Set
this to NO to also list non-local nameservers. This will give you working DNS even
if the local nameserver stops functioning at the expense of duplicated server
queries.
append_nameservers
Append name servers to the dynamically generated list.
prepend_nameservers
Prepend name servers to the dynamically generated list.
append_search
Append search domains to the dynamically generated list.
prepend_search
Prepend search domains to the dynamically generated list.
SUBSCRIBER OPTIONS
openresolv ships with subscribers for the name servers dnsmasq(8), named(8), pdnsd(8),
pdns_recursor(1), and unbound(8). Each subscriber can create configuration files which
should be included in the subscribers main configuration file.
To disable a subscriber, simply set it's name to NO. For example, to disable the libc
subscriber you would set:
libc=NO
dnsmasq_conf
This file tells dnsmasq which name servers to use for specific domains.
dnsmasq_resolv
This file tells dnsmasq which name servers to use for global lookups.
Example resolvconf.conf for dnsmasq:
name_servers=127.0.0.1
dnsmasq_conf=/etc/dnsmasq-conf.conf
dnsmasq_resolv=/etc/dnsmasq-resolv.conf
Example dnsmasq.conf:
listen-address=127.0.0.1
# If dnsmasq is compiled for DBus then we can take
# advantage of not having to restart dnsmasq.
enable-dbus
conf-file=/etc/dnsmasq-conf.conf
resolv-file=/etc/dnsmasq-resolv.conf
named_options
Include this file in the named options block. This file tells named which name
servers to use for global lookups.
named_zones
Include this file in the named global scope, after the options block. This file
tells named which name servers to use for specific domains.
Example resolvconf.conf for named:
name_servers=127.0.0.1
named_options=/etc/named-options.conf
named_zones=/etc/named-zones.conf
Example named.conf:
options {
listen-on { 127.0.0.1; };
include "/etc/named-options.conf";
};
include "/etc/named-zones.conf";
pdnsd_conf
This is the main pdnsd configuration file which we modify to add our forward domains
to. If this variable is not set then we rely on the pdnsd configuration file setup
to read pdnsd_resolv as documented below.
pdnsd_resolv
This file tells pdnsd about global name servers. If this variable is not set then
it's written to pdnsd_conf.
Example resolvconf.conf for pdnsd:
name_servers=127.0.0.1
pdnsd_conf=/etc/pdnsd.conf
# pdnsd_resolv=/etc/pdnsd-resolv.conf
Example pdnsd.conf:
global {
server_ip = 127.0.0.1;
status_ctl = on;
}
server {
# A server definition is required, even if empty.
label="empty";
proxy_only=on;
# file="/etc/pdnsd-resolv.conf";
}
pdns_zones
This file tells pdns_recursor about specific and global name servers.
Example resolvconf.conf for pdns_recursor:
name_servers=127.0.0.1
pdns_zones=/etc/pdns/recursor-zones.conf
Example recursor.conf:
allow-from=127.0.0.0/8, ::1/128
forward-zones-file=/etc/pdns/recursor-zones.conf
unbound_conf
This file tells unbound about specific and global name servers.
unbound_insecure
When set to YES, unbound marks the domains as insecure, thus ignoring DNSSEC.
Example resolvconf.conf for unbound:
name_servers=127.0.0.1
unbound_conf=/etc/unbound-resolvconf.conf
Example unbound.conf:
include: /etc/unbound-resolvconf.conf
SUBSCRIBER INTEGRATION
Not all distributions store the files the subscribers need in the same locations. For
example, named service scripts have been called named, bind and rc.bind and they could be
located in a directory called /etc/rc.d, /etc/init.d or similar. Each subscriber attempts
to automatically configure itself, but not every distribution has been catered for. Also,
users could equally want to use a different version from the one installed by default, such
as bind8 and bind9. To accommodate this, the subscribers have these files in configurable
variables, documented below.
dnsmasq_service
Name of the dnsmasq service.
dnsmasq_restart
Command to restart the dnsmasq service.
dnsmasq_pid
Location of the dnsmasq pidfile.
libc_service
Name of the libc service.
libc_restart
Command to restart the libc service.
named_service
Name of the named service.
named_restart
Command to restart the named service.
pdnsd_restart
Command to restart the pdnsd service.
pdns_service
Command to restart the pdns_recursor service.
pdns_restart
Command to restart the pdns_recursor service.
unbound_service
Name of the unbound service.
unbound_restart
Command to restart the unbound service.
unbound_pid
Location of the unbound pidfile.
SEE ALSO
sh(1), resolv.conf(5), resolvconf(8)
AUTHORS
Roy Marples <roy@marples.name>
BUGS
Each distribution is a special snowflake and likes to name the same thing differently,
namely the named service script.
Please report them to
http://roy.marples.name/projects/openresolv