Provided by: rlinetd_0.9.3-1_amd64 bug

NAME

       rlinetd.conf - rlinetd configuration file

DESCRIPTION

       rlinetd.conf  holds  configuration  information  for rlinetd.  There are a small number of
       similar top level constructs, differing chiefly in which options can be meaningfully  used
       with them.

       All  strings  are quoted with the " character. In some situations (e.g. the log, exec, and
       chroot directives), there are a number of variables  that  can  be  substituted  into  the
       string.
       Unless stated otherwise, all numbers must be positive.

       service "name" {
              ...
       }

              This  construct  describes  a service. The name parameter is for naming convenience
              alone, it simply serves to distinguish logging messages and provides a default  for
              options which can logically accept a name as an argument.

              enabled
                     This  construct  allows  easily enabling or disabling service.  The argument
                     can be either yes or no.  The default value is  yes.   Setting  this  to  no
                     disables service.

                     Example:
                       enabled no;

              port
                     This lists the ports that the service should be made available on. The ports
                     can be listed in either string  or  numeric  format.  If  unspecified,  this
                     defaults to the name of the service unless the service is an RPC service, in
                     which case the port value will be dynamically assigned by the system.

                     Example:
                       port "telnet", "rcmd", 56, 99;

              interface
                     This specifies which interfaces the listed ports  should  be  bound  on.  It
                     takes a list of IP addresses as an argument, corresponding to the configured
                     addresses of the interfaces required. If this keyword is not given or when a
                     special  value any is assigned to it, the service will bind to all available
                     interfaces.

                     Examples:
                       interface 192.168.1.1, 192.168.1.2;

                       interface any;

              exec
                     This specifies the invocation of the service. A number of substitutions  can
                     be made within the string; please see String Modifiers below.

                     Example:
                       exec "/usr/sbin/in.telnetd -d";

              server
                     This specifies the binary to be executed, if different to exec.

                     Example:
                       server "/usr/sbin/tcpd";

              protocol
                     This  specifies  the  socket protocol to use when listening on ports for the
                     service. The argument can be either tcp or udp.   The  default  setting  for
                     this variable is tcp.

                     Example:
                       protocol tcp;

              user
                     This  specifies  the  userid  under  which  this service should run. It will
                     accept an argument in either symbolic or numeric  form.  Unless  group  (see
                     below) is given, the groupid is also set to the user's primary group.

                     Example:
                       user "nobody";

              group
                     This  specifies  the  groupid  under  which this service should run. It will
                     accept an argument in either symbolic or numeric form.

                     Example:
                       group "system";

              backlog
                     This is the backlog argument which will be passed to  the  listen(2)  system
                     call.

                     Example:
                       backlog 30;

              instances
                     This  specifies  the maximum number of service instances that can be running
                     at any one time. The default setting for this variable is 40.

                     Example:
                       instances 50;

              wait
                     This directive emulates the inetd(8) wait behaviour.  The  argument  can  be
                     either yes or no.  The default value is no.  Setting this to yes also resets
                     the value of instances option to 1.

                     Example:
                       wait yes;

              nice
                     This specifies the process priority to run this service at. The argument  is
                     passed  directly  to  the  setpriority(2)  system  call.  The  value  may be
                     negative.

                     Example:
                       nice -5;

              rpc
                     This specifies that the service  should  be  registered  with  the  system's
                     portmap(8)  mapper  as  an  RPC  service.  It accepts a list of arguments as
                     follows.

                     rpc {
                            name "string"; version 3,6,9-15,22;
                     }

                     The name parameter is optional, and defaults to the service name.

              chroot
                     This specifies the root directory for the service. The string  argument  can
                     accept modifiers as detailed in String Modifiers below.

                     Example:
                       chroot "/tftpboot/%O";

              log
                     This  directive  takes  two arguments. The first must be either the symbolic
                     name of a previously specified log directive (see below),  or  the  unquoted
                     word  syslog.   If  the latter, the message will be logged via the syslog(3)
                     call. The second argument is the message that will be logged, subject to the
                     modifiers detailed in String Modifiers below.

                     Example:
                       log syslog "Service from %O complete";

              tcpd
                     This   directive  causes  access controls as specified by tcp_wrappers to be
                     applied. This has the same effect  as  invoking  a  service  with  a  server
                     argument  of  /usr/sbin/tcpd (or wherever your tcpd(8) program is kept), but
                     saves the additional step of starting the program. It will accept up to  two
                     additional  arguments.  The  first  is  a  service name to apply against its
                     rules, and the second is a block of instructions to execute if  matched.  If
                     no  name  is  specified,  it  defaults  to  the  name of the service. If the
                     instruction block is not specified, it defaults to 'exit;'.

                     Examples:
                       tcpd "in.telnetd";

                       tcpd { exec "/usr/local/bin/winnuke %O"; }

                       tcpd "pointless" { echo "Hi guys, come on in."; }

                       tcpd "defiant" { echo "500 Access denied from %O."; exit; }

              exit
                     This directive is only useful in an instruction block argument to  the  tcpd
                     directive.  Note  well  -  not  using  it  (and  not  specifying  some other
                     terminating directive, such as exec) will result in the  service  being  run
                     forever.

                     Example:
                       exit;

              capability
                     This directive specifies the capabilities that this service should have when
                     running.  The  argument  is  a   string   that   is   passed   directly   to
                     cap_from_text(3).   I  know,  that's  a  pretty  lousy description, but this
                     feature  is  of  limited   utility   until   and   unless   you   read   the
                     README.capabilities file anyway.

                     Example:
                       capability "cap_setuid=ep";

              rlimit
                     This  directive  takes  two  arguments. The first is a symbol specifying the
                     type of limit required. These are listed below. The  second  argument  takes
                     one  of  two  forms.  It can either be a single numeric value, in which case
                     both of the soft and hard limits of the resource in question will be set  to
                     this value. Alternatively, it can be a list in the form:

                     rlimit type {
                            soft x; hard y;
                     }

                     In  which case the hard and soft limits will be set appropriately. In either
                     case, the word unlimited can be specified instead of a numeric  value,  thus
                     removing any restriction. The values are passed directly to the setrlimit(2)
                     syscall, and should be specified in that context.

                     Types:
                       cpu, fsize, data, stack, core, rss, nproc, nofile, memlock

                     Example:
                       rlimit cpu 15;

              initgroups
                     The argument can be either yes or no.  This directive  causes  initgroups(3)
                     to  be called at service startup, which sets the supplementary groups of the
                     service according to the /etc/group file.

                     Example:
                       initgroups yes;

              family
                     This directive specifies  the  protocol  family  that  rlinetd  should  bind
                     sockets on for this service. Currently, this can be either ipv4 or ipv6.  If
                     unspecified, this defaults to something appropriate for the system.

                     Example:
                       family ipv6;

              banner
                     This directive lets you dump a file as output to a connection.

                     Example:
                       banner "/etc/nologin";

              echo
                     This directive allows you to output a  dynamically  generated  line  to  the
                     connection.

                     Example:
                       echo "500 Service denied from your IP (%O)";

              filter
                     This  directive  allows  you  to specify a Linux Socket Filter program to be
                     associated with the listening socket. These can be  generated  with  a  tool
                     such as lsfcc(1).

                     Example:
                       filter "/usr/local/lib/rlinetd/filters/privport";

              chargen
                     This  directive  loops  eternally,  outputting data to any connection. If no
                     argument is given, it echoes a subset of the printable characters.  However,
                     a  filename  can  be  supplied as an argument, in which case the contents of
                     that file are output in a loop.

                     Example:
                       chargen "/usr/local/lib/spam";

       log "name" {
              ...
       }

              This construct describes a logging  target.  The  name  parameter  is  used  as  an
              argument to the log directive in service configurations.

              path
                     This specifies the filename for this logfile.

                     Example:
                       path "/var/log/service.log";

              mode
                     This  specifies  the  file  permissions  for  the  logfile.  The argument is
                     required to be numeric, and defaults to 0640 if not specified.

                     Example:
                       mode 0600;

              user
                     This specifies the uid of the logfile, and can  be  specified  as  either  a
                     numeric uid, or username.

                     Example:
                       user "adm";

              group
                     This  specifies  the  gid  of  the logfile, and can be specified as either a
                     numeric gid, or groupname.

                     Example:
                       group "adm";

       defaults {
              ...
       }

              This construct takes the same parameters as a service declaration, but  instead  of
              specifying a service sets defaults for all services specified subsequently.

       directory "path" "match" "ignore";
              This  construct specifies a directory which contains additional configuration files
              to be parsed. Parsing of these additional files does not commence until the current
              file  is  complete.  The match and ignore arguments are optional, and if specified,
              are used to filter the files in the  directory.  Filenames  must  match  the  match
              regexp,  if  given,  and  must  not  match  the  ignore regexp, if given. Filenames
              beginning with a period ('.')  are  skipped  in  all  cases.  Directories  are  not
              recursed into.

   String Modifiers
       There  are  a  number  of  variables  which  can  be  substituted  into  arguments to some
       directives. Although they can all be used in the same places, the information accessed  by
       some is unavailable in certain cases.

       %O     The source IP address of the connection.

       %P     The source port of the connection.

       %C     The total CPU time used.

       %U     The user CPU time used.

       %S     The system CPU time.

       %r     Maximum resident set size.

       %m     Shared memory size.

       %d     Unshared data size.

       %s     Unshared stack size.

       %f     Page reclaims.

       %F     Page faults.

       %p     Swaps.

       %i     Block input operations.

       %o     Block output operations.

       %n     Messages sent.

       %c     Messages received.

       %k     Signals received.

       %w     Voluntary context switches.

       %W     Involuntary context switches.

       %e     Exit code.

       %t     Running time.

       %M     The  current  time expressed as seconds since epoch 1980, dumped as a network order
              32 bit word. This has absolutely no use other than in implementing  the  inetd-like
              time functionality.

       %I     The current time and date, in pretty-printed ctime(3) format.

SEE ALSO

       rlinetd(8), hosts_access(5)

AUTHOR

       This  manual  page  was  written  by  Mikolaj J. Habryn <dichro-doc@rcpt.to>.  Modified by
       Robert Luberda <robert@debian.org>.