Provided by: sympa_6.2.66~dfsg-2_amd64 
NAME
sympa_config - Configuration files for Sympa mailing list manager
DESCRIPTION
There are three levels in Sympa's main configuration: site global, mail domain and list.
sympa.conf: Configuration file for global settings
/etc/sympa/sympa/sympa.conf is main configuration file of Sympa. Several parameters
defined in this file may be overridden by robot.conf configuration file for each virtual
domain, or by config configuration file for each mailing list.
Format of sympa.conf and robot.conf is as following:
• Lines beginning with "#" and containing only spaces are ignored.
• Each line has the form "parameter value". value may contain spaces but may not
contain newlines.
There are simple parameters and compound parameters.
The name of compound parameter consist of a paragraph name and a sub-parameter name
separated by period ("."). However some compound parameters have simple synonym names
to keep compatibility to earlier versions (See "Obsoleted sympa.conf parameters").
Example:
process_archive on
archive.web_access open
archive.mail_access closed
robot.conf: Optional configuration file for the mail domain
robot.conf is the optional configuration file for each mail domain.
Format of robot.conf is the same as sympa.conf above.
config: Configuration file for the mailing list
config is main configuration file of each mailing list.
Format of config is as following:
• Lines beginning with "#" and containing only spaces are ignored.
• There are simple parameters and compound parameters:
• A simple parameter is expressed by single line by each. The line has the form
"parameter value". value may contain spaces but may not contain newlines.
Several parameters may have multiple values. If it's the case, values may be
separated by comma (",") or parameter lines may be repeated. Some of parameters
must have one or more of limited values.
Example:
subject This is subject of my list
remove_headers User-Agent,Importance
custom_headers X-List: mylist
custom_headers X-Face: %`-W7!?^]Sg'I-K>P<cdn&k:~A^{x>(]Gc{V...
rfc2369_header_fields post,owner
• A compound parameter is expressed by multiple lines, so-called "paragraph", that
consists of the first line specifying paragraph name and subsequent one or more
sub-parameter lines. Paragraph must be separated by one or more empty lines from
the other parameters.
Several multiple line parameters may occur multiple times.
Example:
archive
web_access open
mail_access closed
PARAMETERS
Below is entire list of configuration parameters.
• Sub-parameters in paragraph are listed as paragraph"."sub-parameter by each.
• "Default" is built-in default value if any. About symbols for paths, such as
$SENDMAIL_ALIASES, see "Directory layout <https://sympa-
community.github.io/manual/layout.html>".
Service description
"domain"
Primary mail domain name
Format:
/"[-\w]+(?:[.][-\w]+)+"/
Default:
None, mandatory.
Context:
domain (robot.conf), site (sympa.conf)
Example:
domain mail.example.org
"listmaster"
Email addresses of listmasters
Format:
Multiple values allowed, separated by "","".
/$email/
Default:
None, mandatory.
Context:
domain (robot.conf), site (sympa.conf)
Email addresses of the listmasters (users authorized to perform global server commands).
Some error reports may also be sent to these addresses. Listmasters can be defined for
each virtual host, however, the default listmasters will have privileges to manage all
virtual hosts.
Example:
listmaster your_email_address@domain.tld
"supported_lang"
Supported languages
Format:
/"\w+(\-\w+)*"/
Default:
"ca,cs,de,el,en-US,es,et,eu,fi,fr,gl,hu,it,ja,ko,nb,nl,oc,pl,pt-BR,ru,sv,tr,vi,zh-CN,zh-TW"
Context:
domain (robot.conf), site (sympa.conf)
All supported languages for the user interface. Languages proper locale information not
installed are ignored.
"title"
Title of service
Format:
/".+"/
Default:
"Mailing lists service"
Context:
domain (robot.conf), site (sympa.conf)
The name of your mailing list service. It will appear in the header of web interface and
subjects of several service messages.
"gecos"
Display name of Sympa
Format:
/".+"/
Default:
"SYMPA"
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
6.2a.34 and later.
This parameter is used for display name in the "From:" header field for the messages sent
by Sympa itself.
"legacy_character_support_feature"
Support of legacy character set
Format:
"on" - enabled
"off" - disabled
Default:
"off"
Context:
site (sympa.conf)
If set to "on", enables support of legacy character set according to charset.conf(5)
configuration file.
In some language environments, legacy encoding (character set) can be preferred for e-mail
messages: for example iso-2022-jp in Japanese language.
Database related
"update_db_field_types"
Update database structure
Format:
"auto" - automatic
"off" - disabled
Default:
"auto"
Context:
site (sympa.conf)
auto: Updates database table structures automatically.
However, since version 5.3b.5, Sympa will not shorten field size if it already have been
longer than the size defined in database definition.
"db_type"
Type of the database
Format:
/"\w+"/
Default:
"mysql"
Context:
site (sympa.conf)
Possible types are "MySQL", "PostgreSQL", "Oracle" and "SQLite".
"db_host"
Hostname of the database server
Format:
/$host/
Default:
None.
Context:
site (sympa.conf)
With PostgreSQL, you can also use the path to Unix Socket Directory, e.g.
"/var/run/postgresql" for connection with Unix domain socket.
Example:
db_host localhost
"db_port"
Port of the database server
Format:
/"[-/\w]+"/
Default:
None.
Context:
site (sympa.conf)
"db_name"
Name of the database
Format:
/".+"/
Default:
"sympa"
Context:
site (sympa.conf)
With SQLite, this must be the full path to database file.
With Oracle Database, this must be SID, net service name or easy connection identifier (to
use net service name, db_host should be set to "none" and HOST, PORT and SERVICE_NAME
should be defined in tnsnames.ora file).
"db_user"
User for the database connection
Format:
/".+"/
Default:
None.
Context:
site (sympa.conf)
Example:
db_user sympa
"db_passwd"
Password for the database connection
Format:
The value to be concealed.
Default:
None.
Context:
site (sympa.conf)
What ever you use a password or not, you must protect the SQL server (is it not a public
internet service ?)
Example:
db_passwd your_passwd
"db_options"
Database options
Format:
/".+"/
Default:
None.
Context:
site (sympa.conf)
If these options are defined, they will be appended to data source name (DSN) fed to
database driver. Check the related DBD documentation to learn about the available options.
Example:
db_options mysql_read_default_file=/home/joe/my.cnf;mysql_socket=tmp/mysql.sock-test
"db_env"
Environment variables setting for database
Format:
/".+"/
Default:
None.
Context:
site (sympa.conf)
With Oracle Database, this is useful for defining ORACLE_HOME and NLS_LANG.
Example:
db_env NLS_LANG=American_America.AL32UTF8;ORACLE_HOME=/u01/app/oracle/product/11.2.0/server
"db_timeout"
Database processing timeout
Format:
/"\d+"/
Default:
None.
Context:
site (sympa.conf)
Currently, this parameter may be used for SQLite only.
"db_additional_subscriber_fields"
Database private extension to subscriber table
Format:
Multiple values allowed, separated by "","".
/".+"/
Default:
None.
Context:
site (sympa.conf)
Adds more fields to "subscriber_table" table. Sympa recognizes fields defined with this
parameter. You will then be able to use them from within templates and scenarios:
* for scenarios: [subscriber->field]
* for templates: [% subscriber.field %]
These fields will also appear in the list members review page and will be editable by the
list owner. This parameter is a comma-separated list.
You need to extend the database format with these fields
Example:
db_additional_subscriber_fields billing_delay,subscription_expiration
"db_additional_user_fields"
Database private extension to user table
Format:
Multiple values allowed, separated by "","".
/".+"/
Default:
None.
Context:
site (sympa.conf)
Adds more fields to "user_table" table. Sympa recognizes fields defined with this
parameter. You will then be able to use them from within templates: [% subscriber.field %]
This parameter is a comma-separated list.
You need to extend the database format with these fields
Example:
db_additional_user_fields age,address
System log
"syslog"
System log facility for Sympa
Format:
/"\S+"/
Default:
"LOCAL1"
Context:
site (sympa.conf)
Do not forget to configure syslog server.
"log_socket_type"
Communication mode with syslog server
Format:
/"\w+"/
Default:
"unix"
Context:
site (sympa.conf)
"log_level"
Log verbosity
Format:
/"\d+"/
Default:
0
Context:
domain (robot.conf), site (sympa.conf)
Sets the verbosity of logs.
0: Only main operations are logged
3: Almost everything is logged.
Example:
log_level 2
Mail server
"sendmail"
Path to sendmail
Format:
/".+"/
Default:
"/usr/sbin/sendmail"
Context:
site (sympa.conf)
Absolute path to sendmail command line utility (e.g.: a binary named "sendmail" is
distributed with Postfix).
Sympa expects this binary to be sendmail compatible (exim, Postfix, qmail and so on
provide it).
"sendmail_args"
Command line parameters passed to sendmail
Format:
/".+"/
Default:
"-oi -odi -oem"
Context:
site (sympa.conf)
Note that "-f", "-N" and "-V" options and recipient addresses should not be included,
because they will be included by Sympa.
"sendmail_aliases"
Path of the file that contains all list related aliases
Format:
/".+"/
Default:
$SENDMAIL_ALIASES
Context:
domain (robot.conf), site (sympa.conf)
It is recommended to create a specific alias file so that Sympa never overwrites the
standard alias file, but only a dedicated file.
Set this parameter to "none" if you want to disable alias management in Sympa.
"aliases_program"
Program used to update alias database
Format:
/"makemap|newaliases|postalias|postmap|/.+|none"/
Default:
"newaliases"
Context:
domain (robot.conf), site (sympa.conf)
This may be "makemap", "newaliases", "postalias", "postmap" or full path to custom
program.
"aliases_wrapper"
Whether to use the alias wrapper
Format:
"off" - disabled
"on" - enabled
Default:
"on"
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
6.2.59b.1 and later.
If the program to update alias database does not require root privileges, set this
parameter to "off" and remove the wrapper file sympa_newaliases-wrapper.
"aliases_db_type"
Type of alias database
Format:
/"\w[-\w]*"/
Default:
"hash"
Context:
domain (robot.conf), site (sympa.conf)
"btree", "dbm", "hash" and so on. Available when aliases_program is "makemap",
"postalias" or "postmap"
"alias_manager"
Path to alias manager
Format:
/".+"/
Default:
"$SBINDIR/alias_manager.pl"
Context:
site (sympa.conf)
The absolute path to the script that will add/remove mail aliases
Example:
alias_manager /usr/local/libexec/ldap_alias_manager.pl
List definition
"subject"
Subject of the list
Format:
/".+"/
Default:
None, mandatory.
Context:
list (config)
This parameter indicates the subject of the list, which is sent in response to the LISTS
mail command. The subject is a free form text limited to one line.
"visibility"
Visibility of the list
Format:
Name of "visibility" scenario:
"conceal" - conceal except for subscribers
"identified" - conceal from anonymous users
"noconceal" - no conceal
"secret" - conceal even for subscribers
Default:
"conceal"
Context:
list (config), domain (robot.conf), site (sympa.conf)
This parameter indicates whether the list should feature in the output generated in
response to a LISTS command or should be shown in the list overview of the web-interface.
"topics"
Topics for the list
Format:
Multiple values allowed, separated by "","".
List topic.
Default:
None.
Context:
list (config)
This parameter allows the classification of lists. You may define multiple topics as well
as hierarchical ones. WWSympa's list of public lists uses this parameter.
"lang"
Language of the list
Format:
Language tag.
Default:
"en-US"
Context:
list (config), domain (robot.conf), site (sympa.conf)
This parameter defines the language used for the list. It is used to initialize a user's
language preference; Sympa command reports are extracted from the associated message
catalog.
"family_name"
Family name
Format:
/$family_name/
Default:
None.
Context:
list (config)
"max_list_members"
Maximum number of list members
Format:
Number of list members.
Default:
0 (list members)
Context:
list (config), domain (robot.conf), site (sympa.conf)
Available versions:
6.2a.5 and later.
limit for the number of subscribers. 0 means no limit.
"priority"
Priority
Format:
0 - 0 - highest priority
1 - 1
2 - 2
3 - 3
4 - 4
5 - 5
6 - 6
7 - 7
8 - 8
9 - 9 - lowest priority
"z" - queue messages only
Default:
5
Context:
list (config), domain (robot.conf), site (sympa.conf)
The priority with which Sympa will process messages for this list. This level of priority
is applied while the message is going through the spool. The z priority will freeze the
message in the spool.
Receiving
"sender_headers"
Header field name(s) used to determine sender of the messages
Format:
Any.
Default:
"From"
Context:
site (sympa.conf)
"Return-Path" means envelope sender (a.k.a. "UNIX From") which will be alternative to
sender of messages without "From" field. "Resent-From" may also be inserted before
"From", because some mailers add it into redirected messages and keep original "From"
field intact. In particular cases, "Return-Path" can not give right sender: Several mail
gateway products rewrite envelope sender and add original one as non-standard field such
as "X-Envelope-From". If that is the case, you might want to insert it in place of
"Return-Path".
Example:
sender_headers Resent-From,From,Return-Path
"misaddressed_commands"
Reject misaddressed commands
Format:
Any.
Default:
"reject"
Context:
site (sympa.conf)
When a mail command is sent to a list, by default Sympa rejects this message. This feature
can be turned off by setting this parameter to "ignore".
"misaddressed_commands_regexp"
Regular expression matching with misaddressed commands
Format:
Any.
Default:
"((subscribe\s+(\S+)|unsubscribe\s+(\S+)|signoff\s+(\S+)|set\s+(\S+)\s+(mail|nomail|digest))\s*)"
Context:
site (sympa.conf)
Perl regular expression applied on messages subject and body to detect misaddressed
commands.
"sympa_priority"
Priority for command messages
Format:
0 - 0 - highest priority
1 - 1
2 - 2
3 - 3
4 - 4
5 - 5
6 - 6
7 - 7
8 - 8
9 - 9 - lowest priority
"z" - queue messages only
Default:
1
Context:
domain (robot.conf), site (sympa.conf)
Priority applied to messages sent to Sympa command address.
"request_priority"
Priority for messages bound for list owners
Format:
0 - 0 - highest priority
1 - 1
2 - 2
3 - 3
4 - 4
5 - 5
6 - 6
7 - 7
8 - 8
9 - 9 - lowest priority
"z" - queue messages only
Default:
0
Context:
domain (robot.conf), site (sympa.conf)
Priority for processing of messages bound for "LIST-request" address, i.e. owners of the
list
"owner_priority"
Priority for non-VERP bounces
Format:
0 - 0 - highest priority
1 - 1
2 - 2
3 - 3
4 - 4
5 - 5
6 - 6
7 - 7
8 - 8
9 - 9 - lowest priority
"z" - queue messages only
Default:
9
Context:
domain (robot.conf), site (sympa.conf)
Priority for processing of messages bound for "LIST-owner" address, i.e. non-delivery
reports (bounces).
"incoming_max_count"
Max number of sympa.pl workers
Format:
/"\d+"/
Default:
1
Context:
site (sympa.conf)
Available versions:
6.2b.5 and later.
Max number of workers of sympa.pl daemon processing incoming spool.
"sleep"
Interval between scanning incoming message spool
Format:
Number of seconds.
Default:
5 (seconds)
Context:
site (sympa.conf)
Must not be 0.
Sending/receiving setup
"send"
Who can send messages
Format:
Name of "send" scenario:
"closed" - closed
"confidential" - restricted to subscribers, messages from others are discarded
"editordkim" - Moderated, no authentication needed if DKIM signature from moderator is
OK
"editorkey" - Moderated
"editorkeyonly" - Moderated, even for moderators
"editorkeyonlyauth" - Moderated, need authentication from moderator
"newsletter" - Newsletter, restricted to moderators
"newsletterkeyonly" - Newsletter, restricted to moderators after confirmation
"owner" - Restricted to list owners only
"ownerauth" - Restricted to list owners with previous MD5 authentication
"private" - restricted to subscribers
"private_smime" - restricted to subscribers and checked smime signature
"privateandeditorkey" - Moderated, restricted to subscribers
"privateandnomultipartoreditorkey" - Moderated, for non subscribers sending multipart
messages
"privatekey" - restricted to subscribers with previous md5 authentication
"privatekeyandeditorkeyonly" - Moderated, for subscribers and even moderators themself
"privateoreditorkey" - Private, moderated for non subscribers
"privateorpublickey" - Private, confirmation for non subscribers
"public" - public list
"public_nobcc" - public list, Bcc rejected (anti-spam)
"publickey" - anyone no authentication if DKIM signature is OK
"publicnoattachment" - public list multipart/mixed messages are forwarded to moderator
"publicnomultipart" - public list multipart messages are rejected
Default:
"private"
Context:
list (config), domain (robot.conf), site (sympa.conf)
This parameter specifies who can send messages to the list.
"delivery_time"
Delivery time (hh:mm)
Format:
/"[0-2]?\d\:[0-6]\d"/
Default:
None.
Context:
list (config)
If this parameter is present, non-digest messages will be delivered to subscribers at this
time: When this time has been past, delivery is postponed to the same time in next day.
"digest"
(Paragraph) Digest frequency
Single occurrence
Definition of digest mode. If this parameter is present, subscribers can select the option
of receiving messages in multipart/digest MIME format, or as a plain text digest. Messages
are then grouped together, and compiled messages are sent to subscribers according to the
frequency selected with this parameter.
"digest.days"
days
Format:
Multiple occurrences allowed.
Day of week, 0 - 6.
Default:
None, mandatory.
Context:
list (config)
"digest.hour"
hour
Format:
/"\d+"/
Default:
None, mandatory.
Context:
list (config)
"digest.minute"
minute
Format:
/"\d+"/
Default:
None, mandatory.
Context:
list (config)
"digest_max_size"
Digest maximum number of messages
Format:
Number of messages.
Default:
25 (messages)
Context:
list (config)
"available_user_options"
(Paragraph) Available subscription options
Single occurrence
"available_user_options.reception"
reception mode
Format:
Multiple values allowed, separated by "","".
Reception mode of list member.
Default:
"mail,notice,digest,digestplain,summary,nomail,txt,urlize,not_me"
Context:
list (config)
Only these modes will be allowed for the subscribers of this list. If a subscriber has a
reception mode not in the list, Sympa uses the mode specified in the default_user_options
paragraph.
"default_user_options"
(Paragraph) Subscription profile
Single occurrence
Default profile for the subscribers of the list.
"default_user_options.reception"
reception mode
Format:
Reception mode of list member.
Default:
"mail"
Context:
list (config)
Mail reception mode.
"default_user_options.visibility"
visibility
Format:
Visibility mode of list memeber.
Default:
"noconceal"
Context:
list (config)
Visibility of the subscriber.
"msg_topic"
(Paragraph) Topics for message categorization
Multiple occurrences allowed
This paragraph defines a topic used to tag a message of a list, named by msg_topic.name
("other" is a reserved word), its title is msg_topic.title. The msg_topic.keywords entry
is optional and allows automatic tagging. This should be a list of keywords, separated by
','.
"msg_topic.name"
Message topic name
Format:
/"[\-\w]+"/
Default:
None, mandatory.
Context:
list (config)
"msg_topic.keywords"
Message topic keywords
Format:
/"[^,\n]+(,[^,\n]+)*"/
Default:
None.
Context:
list (config)
"msg_topic.title"
Message topic title
Format:
/".+"/
Default:
None, mandatory.
Context:
list (config)
"msg_topic_keywords_apply_on"
Defines to which part of messages topic keywords are applied
Format:
"subject" - subject field
"body" - message body
"subject_and_body" - subject and body
Default:
"subject"
Context:
list (config)
This parameter indicates which part of the message is used to perform automatic tagging.
"msg_topic_tagging"
Message tagging
Format:
"required_sender" - required to post message
"required_moderator" - required to distribute message
"optional" - optional
Default:
"optional"
Context:
list (config)
This parameter indicates if the tagging is optional or required for a list.
"reply_to_header"
(Paragraph) Reply address
Single occurrence
This defines what Sympa will place in the Reply-To: SMTP header field of the messages it
distributes.
"reply_to_header.value"
value
Format:
"sender" - sender
"list" - list
"all" - all
"other_email" - other email address
Default:
"sender"
Context:
list (config)
This parameter indicates whether the Reply-To: field should indicate the sender of the
message (sender), the list itself (list), both list and sender (all) or an arbitrary
e-mail address (defined by the other_email parameter).
Note: it is inadvisable to change this parameter, and particularly inadvisable to set it
to list. Experience has shown it to be almost inevitable that users, mistakenly believing
that they are replying only to the sender, will send private messages to a list. This can
lead, at the very least, to embarrassment, and sometimes to more serious consequences.
"reply_to_header.other_email"
other email address
Format:
/$email/
Default:
None.
Context:
list (config)
If value was set to other_email, this parameter defines the e-mail address used.
"reply_to_header.apply"
respect of existing header field
Format:
"forced" - overwrite Reply-To: header field
"respect" - preserve existing header field
Default:
"respect"
Context:
list (config)
The default is to respect (preserve) the existing Reply-To: SMTP header field in incoming
messages. If set to forced, Reply-To: SMTP header field will be overwritten.
"anonymous_sender"
Anonymous sender
Format:
/".+"/
Default:
None.
Context:
list (config)
To hide the sender's email address before distributing the message. It is replaced by the
provided email address.
"anonymous_header_fields"
Header fields removed when a mailing list is setup in anonymous mode
Format:
Any.
Default:
"Authentication-Results,Disposition-Notification-To,DKIM-Signature,Injection-Info,Organisation,Organization,Original-Recipient,Originator,Path,Received,Received-SPF,Reply-To,Resent-Reply-To,Return-Receipt-To,X-Envelope-From,X-Envelope-To,X-Sender,X-X-Sender"
Context:
site (sympa.conf)
See "anonymous_sender" list parameter.
Default value prior to Sympa 6.1.19 is:
Sender,X-Sender,Received,Message-id,From,X-Envelope-To,Resent-From,Reply-To,Organization,Disposition-Notification-To,X-Envelope-From,X-X-Sender
"custom_header"
Custom header field
Format:
Multiple occurrences allowed.
/"\S+:\s+.*"/
Default:
None.
Context:
list (config)
This parameter is optional. The headers specified will be added to the headers of messages
distributed via the list. As of release 1.2.2 of Sympa, it is possible to put several
custom header lines in the configuration file at the same time.
"custom_subject"
Subject tagging
Format:
/".+"/
Default:
None.
Context:
list (config)
This parameter is optional. It specifies a string which is added to the subject of
distributed messages (intended to help users who do not use automatic tools to sort
incoming messages). This string will be surrounded by [] characters.
"footer_type"
Attachment type
Format:
"mime" - add a new MIME part
"append" - append to message body
Default:
"mime"
Context:
list (config)
List owners may decide to add message headers or footers to messages sent via the list.
This parameter defines the way a footer/header is added to a message.
mime:
The default value. Sympa will add the footer/header as a new MIME part.
append:
Sympa will not create new MIME parts, but will try to append the header/footer to the body
of the message. Predefined message-footers will be ignored. Headers/footers may be
appended to text/plain messages only.
"max_size"
Maximum message size
Format:
Number of bytes.
Default:
5242880 (bytes)
Context:
list (config), domain (robot.conf), host
Maximum size of a message in 8-bit bytes.
Example:
max_size 2097152
"personalization_feature"
Allow message personalization
Format:
"on" - enabled
"off" - disabled
Default:
"off"
Context:
list (config), domain (robot.conf), site (sympa.conf)
Available versions:
6.2.59b.2 and later.
"personalization"
(Paragraph) Message personalization
Single occurrence
"personalization.web_apply_on"
Scope for messages from the web interface
Format:
"none" - do nothing
"footer" - header and footer
"all" - all
Default:
"footer"
Context:
list (config), domain (robot.conf), site (sympa.conf)
"personalization.mail_apply_on"
Scope for messages from incoming email
Format:
"none" - do nothing
"footer" - header and footer
"all" - all
Default:
"none"
Context:
list (config), domain (robot.conf), site (sympa.conf)
"message_hook"
(Paragraph) Hook modules for message processing
Single occurrence
"message_hook.pre_distribute"
A hook on the messages before distribution
Format:
/"(::|\w)+"/
Default:
None.
Context:
list (config)
"message_hook.post_archive"
A hook on the messages just after archiving
Format:
/"(::|\w)+"/
Default:
None.
Context:
list (config)
"reject_mail_from_automates_feature"
Reject mail from automatic processes (crontab, etc)?
Format:
"on" - enabled
"off" - disabled
Default:
"on"
Context:
list (config), site (sympa.conf)
Available versions:
6.2a.0 and later.
Rejects messages that seem to be from automated services, based on a few header fields
("Content-Identifier:", "Auto-Submitted:").
Sympa also can be configured to reject messages based on the "From:" header field value
(see "loop_prevention_regex").
"remove_headers"
Header fields to be removed from incoming messages
Format:
Multiple values allowed, separated by "","".
/"\S+"/
Default:
"X-Sympa-To,X-Family-To,Return-Receipt-To,Precedence,X-Sequence,Disposition-Notification-To,Sender"
Context:
list (config), site (sympa.conf)
Use it, for example, to ensure some privacy for your users in case that "anonymous_sender"
mode is inappropriate.
The removal of these header fields is applied before Sympa adds its own header fields
("rfc2369_header_fields" and "custom_header").
Example:
remove_headers Resent-Date,Resent-From,Resent-To,Resent-Message-Id,Sender,Delivered-To
"remove_outgoing_headers"
Header fields to be removed before message distribution
Format:
Multiple values allowed, separated by "","".
/"\S+"/
Default:
"none"
Context:
list (config), site (sympa.conf)
The removal happens after Sympa's own header fields are added; therefore, it is a
convenient way to remove Sympa's own header fields (like "X-Loop:" or "X-no-archive:") if
you wish.
Example:
remove_outgoing_headers X-no-archive
"rfc2369_header_fields"
RFC 2369 header fields
Format:
Multiple values allowed, separated by "","".
"help" - help
"subscribe" - subscription
"unsubscribe" - unsubscription
"post" - posting address
"owner" - owner
"archive" - list archive
Default:
"help,subscribe,unsubscribe,post,owner,archive"
Context:
list (config), site (sympa.conf)
Specify which RFC 2369 mailing list header fields to be added.
"List-Id:" header field defined in RFC 2919 is always added. Sympa also adds "Archived-
At:" header field defined in RFC 5064.
Distribution
"urlize_min_size"
Minimum size to be urlized
Format:
Number of bytes.
Default:
10240 (bytes)
Context:
domain (robot.conf), site (sympa.conf)
When a subscriber chose "urlize" reception mode, attachments not smaller than this size
will be urlized.
"allowed_external_origin"
Allowed external links in sanitized HTML
Format:
/"[-\w*]+(?:[.][-\w*]+)+"/
Default:
None.
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
6.2.19b.2 and later.
When the HTML content of a message must be sanitized, links ("href" or "src" attributes)
with the hosts listed in this parameter will not be scrubbed. If "*" character is
included, it matches any subdomains. Single "*" allows any hosts.
Example:
allowed_external_origin *.example.org,www.example.com
"sympa_packet_priority"
Default priority for a packet
Format:
0 - 0 - highest priority
1 - 1
2 - 2
3 - 3
4 - 4
5 - 5
6 - 6
7 - 7
8 - 8
9 - 9 - lowest priority
"z" - queue messages only
Default:
5
Context:
domain (robot.conf), site (sympa.conf)
The default priority set to a packet to be sent by the bulk.
"bulk_fork_threshold"
Fork threshold of bulk daemon
Format:
/"\d+"/
Default:
1
Context:
site (sympa.conf)
The minimum number of packets before bulk daemon forks a new worker to increase sending
rate.
"bulk_max_count"
Maximum number of bulk workers
Format:
/"\d+"/
Default:
3
Context:
site (sympa.conf)
"bulk_lazytime"
Idle timeout of bulk workers
Format:
Number of seconds.
Default:
600 (seconds)
Context:
site (sympa.conf)
The number of seconds a bulk worker will remain running without processing a message
before it spontaneously exits.
"bulk_sleep"
Sleep time of bulk workers
Format:
Number of seconds.
Default:
1 (seconds)
Context:
site (sympa.conf)
The number of seconds a bulk worker sleeps between starting a new loop if it didn't find a
message to send.
Keep it small if you want your server to be reactive.
"bulk_wait_to_fork"
Interval between checks of packet numbers
Format:
Number of seconds.
Default:
10 (seconds)
Context:
site (sympa.conf)
Number of seconds a master bulk daemon waits between two packets number checks.
Keep it small if you expect brutal increases in the message sending load.
"log_smtp"
Log invocation of sendmail
Format:
"on" - enabled
"off" - disabled
Default:
"off"
Context:
domain (robot.conf), site (sympa.conf)
This can be overwritten by "-m" option for sympa.pl.
"maxsmtp"
Maximum number of sendmail processes
Format:
/"\d+"/
Default:
40
Context:
site (sympa.conf)
Maximum number of simultaneous child processes spawned by Sympa. This is the main load
control parameter.
Proposed value is quite low, but you can rise it up to 100, 200 or even 300 with powerful
systems.
Example:
maxsmtp 500
"nrcpt"
Maximum number of recipients per call to sendmail
Format:
/"\d+"/
Default:
25
Context:
site (sympa.conf)
This grouping factor makes it possible for the sendmail processes to optimize the number
of SMTP sessions for message distribution. If needed, you can limit the number of
recipients for a particular domain. Check the "nrcpt_by_domain.conf" configuration file.
"avg"
Maximum number of different mail domains per call to sendmail
Format:
/"\d+"/
Default:
10
Context:
site (sympa.conf)
Privileges
"create_list"
Who is able to create lists
Format:
Name of "create_list" scenario:
"closed" - closed
"listmaster" - restricted to listmaster
"public_listmaster" - anybody by validation by listmaster required
Default:
"public_listmaster"
Context:
domain (robot.conf), site (sympa.conf)
Defines who can create lists (or request list creation) by creating new lists or by
renaming or copying existing lists.
Example:
create_list intranet
"allow_subscribe_if_pending"
Allow adding subscribers to a list not open
Format:
"on" - enabled
"off" - disabled
Default:
"on"
Context:
domain (robot.conf), site (sympa.conf)
If set to "off", adding subscribers to, or removing subscribers from a list with status
other than "open" is forbidden.
"global_remind"
Who is able to send remind messages over all lists
Format:
Name of "global_remind" scenario:
"listmaster" - only for listmaster
Default:
"listmaster"
Context:
site (sympa.conf)
"move_user"
Who is able to change user's email
Format:
Name of "move_user" scenario:
"auth" - need authentication
"closed" - impossible
"listmaster" - listmaster only
Default:
"auth"
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
6.2.19b.1 and later.
"use_blocklist"
Use blocklist
Format:
/"[-.\w]+"/
Default:
"send,create_list"
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
6.2.61b.1 and later.
List of operations separated by comma for which blocklist filter is applied. Setting this
parameter to "none" will hide the blocklist feature.
"info"
Who can view list information
Format:
Name of "info" scenario:
"conceal" - restricted to subscribers - Silent rejection otherwise.
"open" - for anyone
"private" - restricted to subscribers
Default:
"open"
Context:
list (config), domain (robot.conf), site (sympa.conf)
"subscribe"
Who can subscribe to the list
Format:
Name of "subscribe" scenario:
"auth" - subscription request confirmed
"auth_notify" - need authentication (notification is sent to owners)
"auth_notifydkim" - need authentication unless DKIM signature is OK (notification is
sent to owners)
"auth_owner" - requires authentication then owner approval
"auth_ownerdkim" - requires authentication unless DKIM signature is OK, then owner
approval
"authdkim" - subscription request confirmed
"closed" - subscription is impossible
"open" - for anyone without authentication
"open_notify" - anyone, notification is sent to list owner
"open_quiet" - anyone, no welcome message
"owner" - owners approval
"smime" - requires S/MIME signed
"smimeorowner" - requires S/MIME signed or owner approval
Default:
"open"
Context:
list (config), domain (robot.conf), site (sympa.conf)
The subscribe parameter defines the rules for subscribing to the list.
"add"
Who can add subscribers
Format:
Name of "add" scenario:
"auth" - restricted to owner with authentication
"authdkim" - restricted to owner without authentication if DKIM signature is OK.
"closed" - add impossible
"owner" - add performed by list owner does not need authentication
"owner_notify" - add performed by owner does not need authentication (notification)
"ownerdkim" - add performed by list owner does not need authentication if DKIM
signature OK
Default:
"owner"
Context:
list (config), domain (robot.conf), site (sympa.conf)
Privilege for adding (ADD command) a subscriber to the list
"unsubscribe"
Who can unsubscribe
Format:
Name of "unsubscribe" scenario:
"auth" - need authentication
"auth_notify" - authentication requested, notification sent to owner
"auth_notifydkim" - authentication requested unless DKIM signature is OK, notification
sent to owner
"authdkim" - need authentication unless DKIM signature is OK
"closed" - impossible
"open" - open
"open_notify" - open with mail confirmation, owner is notified
"owner" - owners approval
Default:
"open"
Context:
list (config), domain (robot.conf), site (sympa.conf)
This parameter specifies the unsubscription method for the list. Use open_notify or
auth_notify to allow owner notification of each unsubscribe command.
"del"
Who can delete subscribers
Format:
Name of "del" scenario:
"auth" - deletion performed only by list owners, need authentication
"authdkim" - deletion performed only by list owners, need authentication unless DKIM
signature is OK
"closed" - remove subscriber impossible
"owner" - by owner without authentication
"owner_notify" - list owners, authentication not needed (notification)
"ownerdkim" - by owner without authentication if DKIM signature OK
Default:
"owner"
Context:
list (config), domain (robot.conf), site (sympa.conf)
"invite"
Who can invite people
Format:
Name of "invite" scenario:
"closed" - closed
"owner" - invite perform by list owner do not need authentication
"private" - restricted to subscribers
"public" - public
Default:
"private"
Context:
list (config), domain (robot.conf), site (sympa.conf)
"remind"
Who can start a remind process
Format:
Name of "remind" scenario:
"listmaster" - listmaster only
"listmasterdkim" - listmaster only (do not require authentication if DKIM siganture is
OK)
"owner" - restricted to list owners
"ownerdkim" - restricted to list owners (authentication is not required if a DKIM
signature is OK)
Default:
"owner"
Context:
list (config), domain (robot.conf), site (sympa.conf)
This parameter specifies who is authorized to use the remind command.
"review"
Who can review subscribers
Format:
Name of "review" scenario:
"closed" - no one can review
"listmaster" - listmaster only
"owner" - only owner (and listmaster)
"private" - restricted to subscribers
"public" - anyone can do it!
Default:
"owner"
Context:
list (config), domain (robot.conf), site (sympa.conf)
This parameter specifies who can access the list of members. Since subscriber addresses
can be abused by spammers, it is strongly recommended that you only authorize owners or
subscribers to access the subscriber list.
"owner_domain"
Required domains for list owners
Format:
/"$host( +$host)*"/
Default:
None.
Context:
list (config), domain (robot.conf), site (sympa.conf)
Available versions:
6.2.23b.3 and later.
Restrict list ownership to addresses in the specified domains. This can be used to reserve
list ownership to a group of trusted users from a set of domains associated with an
organization, while allowing moderators and subscribers from the Internet at large.
"owner_domain_min"
Minimum owners in required domains
Format:
/"\d+"/
Default:
0
Context:
list (config), domain (robot.conf), site (sympa.conf)
Available versions:
6.2.23b.3 and later.
Minimum number of owners for each list must satisfy the owner_domain restriction. The
default of zero (0) means *all* list owners must match. Setting to 1 requires only one
list owner to match owner_domain; all other owners can be from any domain. This setting
can be used to ensure that there is always at least one known contact point for any
mailing list.
"shared_doc"
(Paragraph) Shared documents
Single occurrence
This paragraph defines read and edit access to the shared document repository.
"shared_doc.d_read"
Who can view
Format:
Name of "d_read" scenario:
"owner" - restricted to list owners
"private" - restricted to subscribers
"private-https" - restricted to subscribers authenticated with user cert
"public" - public documents
Default:
"private"
Context:
list (config), domain (robot.conf), site (sympa.conf)
"shared_doc.d_edit"
Who can edit
Format:
Name of "d_edit" scenario:
"editor" - moderated for subscribers
"owner" - restricted to list owners
"private" - restricted to subscribers
"private-https" - restricted to subscribers authenticated with user cert
"public" - public documents
Default:
"owner"
Context:
list (config), domain (robot.conf), site (sympa.conf)
"shared_doc.quota"
quota
Format:
Number of Kbytes.
Default:
None.
Context:
list (config), domain (robot.conf), site (sympa.conf)
Archives
"ignore_x_no_archive_header_feature"
Ignore "X-no-archive:" header field
Format:
"on" - enabled
"off" - disabled
Default:
"off"
Context:
site (sympa.conf)
Sympa's default behavior is to skip archiving of incoming messages that have an "X-no-
archive:" header field set. This parameter allows one to change this behavior.
Example:
ignore_x_no_archive_header_feature on
"custom_archiver"
Custom archiver
Format:
/".+"/
Default:
None.
Context:
site (sympa.conf)
Activates a custom archiver to use instead of MHonArc. The value of this parameter is the
absolute path to the executable file.
Sympa invokes this file with these two arguments:
--list
The address of the list including domain part.
--file
Absolute path to the message to be archived.
"process_archive"
Store distributed messages into archive
Format:
"on" - enabled
"off" - disabled
Default:
"off"
Context:
list (config), domain (robot.conf), site (sympa.conf)
Available versions:
6.2b.1 and later.
If enabled, distributed messages via lists will be archived. Otherwise archiving is
disabled.
Note that even if setting this parameter disabled, past archives will not be removed and
will be accessible according to access settings by each list.
"archive"
(Paragraph) Archives
Single occurrence
Privilege for reading mail archives and frequency of archiving.
Defines who can access the list's web archive.
"archive.period"
Deprecated.
Context:
list (config)
"archive.access"
Deprecated.
Context:
list (config)
Available versions:
up to 6.2a.43.
"archive.web_access"
access right
Format:
Name of "archive_web_access" scenario:
"closed" - closed
"listmaster" - listmaster
"owner" - by owner
"private" - subscribers only
"public" - public
Default:
"closed"
Context:
list (config), domain (robot.conf), site (sympa.conf)
Available versions:
6.2b.1 and later.
"archive.mail_access"
access right by mail commands
Format:
Name of "archive_mail_access" scenario:
"closed" - closed
"owner" - by owner
"private" - subscribers only
"public" - public
Default:
"closed"
Context:
list (config), domain (robot.conf), site (sympa.conf)
Available versions:
6.2b.1 and later.
"archive.quota"
quota
Format:
Number of Kbytes.
Default:
None.
Context:
list (config), site (sympa.conf)
Available versions:
6.2b.1 and later.
"archive.max_month"
Maximum number of month archived
Format:
Number of months.
Default:
None.
Context:
list (config)
Available versions:
6.2b.1 and later.
"archive_crypted_msg"
Archive encrypted mails as cleartext
Format:
"original" - original messages
"decrypted" - decrypted messages
Default:
"original"
Context:
list (config)
"web_archive_spam_protection"
Protect web archive against spam harvesters
Format:
"cookie" - use HTTP cookie
"javascript" - use JavaScript
"at" - replace @ characters
"concealed" - never show address
"none" - do nothing
Default:
"cookie"
Context:
list (config), domain (robot.conf), site (sympa.conf)
The same as "spam_protection", but restricted to the web archive.
In addition to it:
cookie: users must submit a small form in order to receive a cookie before browsing the
web archive.
concealed: e-mail addresses will never be displayed.
Bounces
"bounce"
(Paragraph) Bounces management
Single occurrence
"bounce.warn_rate"
warn rate
Format:
Number of %.
Default:
30 (%)
Context:
list (config), site (sympa.conf)
The list owner receives a warning whenever a message is distributed and the number
(percentage) of bounces exceeds this value.
"bounce.halt_rate"
Deprecated.
Context:
list (config), site (sympa.conf)
"bouncers_level1"
(Paragraph) Management of bouncers, 1st level
Single occurrence
Level 1 is the lower level of bouncing users
"bouncers_level1.rate"
threshold
Format:
Number of points.
Default:
45 (points)
Context:
list (config), domain (robot.conf), site (sympa.conf)
Each bouncing user have a score (from 0 to 100).
This parameter defines a lower limit for each category of bouncing users.For example,
level 1 begins from 45 to level_2_treshold.
"bouncers_level1.action"
action for this population
Format:
"remove_bouncers" - remove bouncing users
"notify_bouncers" - send notify to bouncing users
"none" - do nothing
Default:
"notify_bouncers"
Context:
list (config)
This parameter defines which task is automatically applied on level 1 bouncers.
"bouncers_level1.notification"
notification
Format:
"none" - do nothing
"owner" - owner
"listmaster" - listmaster
Default:
"owner"
Context:
list (config)
When automatic task is executed on level 1 bouncers, a notification email can be send to
listowner or listmaster.
"bouncers_level2"
(Paragraph) Management of bouncers, 2nd level
Single occurrence
Level 2 is the highest level of bouncing users
"bouncers_level2.rate"
threshold
Format:
Number of points.
Default:
75 (points)
Context:
list (config), domain (robot.conf), site (sympa.conf)
Each bouncing user have a score (from 0 to 100).
This parameter defines the score range defining each category of bouncing users.For
example, level 2 is for users with a score between 80 and 100.
"bouncers_level2.action"
action for this population
Format:
"remove_bouncers" - remove bouncing users
"notify_bouncers" - send notify to bouncing users
"none" - do nothing
Default:
"remove_bouncers"
Context:
list (config)
This parameter defines which task is automatically applied on level 2 bouncers.
"bouncers_level2.notification"
notification
Format:
"none" - do nothing
"owner" - owner
"listmaster" - listmaster
Default:
"owner"
Context:
list (config)
When automatic task is executed on level 2 bouncers, a notification email can be send to
listowner or listmaster.
"verp_rate"
percentage of list members in VERP mode
Format:
"100%" - 100% - always
"50%" - 50%
"33%" - 33%
"25%" - 25%
"20%" - 20%
"10%" - 10%
"5%" - 5%
"2%" - 2%
"0%" - 0% - never
Default:
"0%"
Context:
list (config), domain (robot.conf), site (sympa.conf)
Uses variable envelope return path (VERP) to detect bouncing subscriber addresses.
0%: VERP is never used.
100%: VERP is always in use.
VERP requires address with extension to be supported by MTA. If tracking is enabled for a
list or a message, VERP is applied for 100% of subscribers.
"tracking"
(Paragraph) Message tracking feature
Single occurrence
"tracking.delivery_status_notification"
tracking message by delivery status notification
Format:
"on" - enabled
"off" - disabled
Default:
"off"
Context:
list (config), site (sympa.conf)
"tracking.message_disposition_notification"
tracking message by message disposition notification
Format:
"on" - enabled
"on_demand" - on demand
"off" - disabled
Default:
"off"
Context:
list (config), site (sympa.conf)
Available versions:
6.2a.41 and later.
"tracking.tracking"
who can view message tracking
Format:
Name of "tracking" scenario:
"owner" - only owner (and listmaster)
"private" - restricted to subscribers
Default:
"owner"
Context:
list (config), site (sympa.conf)
Available versions:
6.2a.3 and later.
"tracking.retention_period"
Tracking datas are removed after this number of days
Format:
Number of days.
Default:
90 (days)
Context:
list (config), site (sympa.conf)
Available versions:
6.2a.3 and later.
"tracking.message_delivery_notification"
See "message_disposition_notification".
Context:
list (config)
Available versions:
6.2a.0 to 6.2a.40.
"welcome_return_path"
Welcome return-path
Format:
"unique" - bounce management
"owner" - owner
Default:
"owner"
Context:
list (config), site (sympa.conf)
If set to unique, the welcome message is sent using a unique return path in order to
remove the subscriber immediately in the case of a bounce.
"remind_return_path"
Return-path of the REMIND command
Format:
"unique" - bounce management
"owner" - owner
Default:
"owner"
Context:
list (config), site (sympa.conf)
Same as welcome_return_path, but applied to remind messages.
"expire_bounce_task"
Task for expiration of old bounces
Format:
/"\w+"/
Default:
"daily"
Context:
site (sympa.conf)
This task resets bouncing information for addresses not bouncing in the last 10 days after
the latest message distribution.
"purge_orphan_bounces_task"
Task for cleaning invalidated bounces
Format:
/"\w+"/
Default:
"monthly"
Context:
site (sympa.conf)
This task deletes bounce information for unsubscribed users.
"eval_bouncers_task"
Task for updating bounce scores
Format:
/"\w+"/
Default:
"daily"
Context:
site (sympa.conf)
This task scans all bouncing users for all lists, and updates "bounce_score_subscriber"
field in "subscriber_table" table. The scores may be used for management of bouncers.
"process_bouncers_task"
Task for management of bouncers
Format:
/"\w+"/
Default:
"weekly"
Context:
site (sympa.conf)
This task executes actions on bouncing users configured by each list, according to their
scores.
"purge_tables_task"
Task for cleaning tables
Format:
/"\w+"/
Default:
"daily"
Context:
site (sympa.conf)
This task cleans old tracking information from "notification_table" table.
"minimum_bouncing_count"
Minimum number of bounces
Format:
/"\d+"/
Default:
10
Context:
site (sympa.conf)
The minimum number of bounces received to update bounce score of a user.
"minimum_bouncing_period"
Minimum bouncing period
Format:
Number of days.
Default:
10 (days)
Context:
site (sympa.conf)
The minimum period for which bouncing lasted to update bounce score of a user.
"bounce_delay"
Delay of bounces
Format:
Number of days.
Default:
0 (days)
Context:
site (sympa.conf)
Average time for a bounce sent back to mailing list server after a post was sent to a
list. Usually bounces are sent back on the same day as the original message.
"bounce_email_prefix"
Prefix of VERP return address
Format:
/"\S+"/
Default:
"bounce"
Context:
site (sympa.conf)
The prefix to consist the return-path of probe messages used for bounce management, when
variable envelope return path (VERP) is enabled. VERP requires address with extension to
be supported by MTA.
If you change the default value, you must modify the mail aliases too.
"return_path_suffix"
Suffix of list return address
Format:
/"\S+"/
Default:
"-owner"
Context:
site (sympa.conf)
The suffix appended to the list name to form the return-path of messages distributed
through the list. This address will receive all non-delivery reports (also called
bounces).
Loop prevention
"loop_command_max"
Maximum number of responses to command message
Format:
/"\d+"/
Default:
200
Context:
site (sympa.conf)
The maximum number of command reports sent to an email address. Messages are stored in
"bad" subdirectory of incoming message spool, and reports are not longer sent.
"loop_command_sampling_delay"
Delay before counting responses to command message
Format:
Number of seconds.
Default:
3600 (seconds)
Context:
site (sympa.conf)
This parameter defines the delay in seconds before decrementing the counter of reports
sent to an email address.
"loop_command_decrease_factor"
Decrementing factor of responses to command message
Format:
/"[.\d]+"/
Default:
0.5
Context:
site (sympa.conf)
The decrementation factor (from 0 to 1), used to determine the new report counter after
expiration of the delay.
"msgid_table_cleanup_ttl"
Expiration period of message ID table
Format:
Number of seconds.
Default:
86400 (seconds)
Context:
site (sympa.conf)
Expiration period of entries in the table maintained by sympa_msg.pl daemon to prevent
delivery of duplicate messages caused by loop.
"msgid_table_cleanup_frequency"
Cleanup interval of message ID table
Format:
Number of seconds.
Default:
3600 (seconds)
Context:
site (sympa.conf)
Interval between cleanups of the table maintained by sympa_msg.pl daemon to prevent
delivery of duplicate messages caused by loop.
Automatic lists
"automatic_list_feature"
Automatic list
Format:
"on" - enabled
"off" - disabled
Default:
"off"
Context:
domain (robot.conf), site (sympa.conf)
"automatic_list_removal"
Remove empty automatic list
Format:
"none" - do nothing
"if_empty" - if_empty
Default:
"none"
Context:
domain (robot.conf), site (sympa.conf)
If set to "if_empty", then Sympa will remove automatically created mailing lists just
after their creation, if they contain no list member.
Example:
automatic_list_removal if_empty
"automatic_list_creation"
Who is able to create automatic list
Format:
Name of "automatic_list_creation" scenario:
"family_owner" - Restricted to people subscribed to the list of family owners.
"listmaster" - restricted to listmaster
"public" - anybody. Be sure you know what you are doing
Default:
"public"
Context:
domain (robot.conf), site (sympa.conf)
"automatic_list_families"
Definition of automatic list families
Format:
/".+"/
Default:
None.
Context:
domain (robot.conf), site (sympa.conf)
Defines the families the automatic lists are based on. It is a character string structured
as follows:
* each family is separated from the other by a semicolon (;)
* inside a family definition, each field is separated from the other by a colon (:)
* each field has the structure: "<field name>=<field value>"
Basically, each time Sympa uses the automatic lists families, the values defined in this
parameter will be available in the family object.
* for scenarios: [family->name]
* for templates: [% family.name %]
Example:
automatic_list_families name=family_one:prefix=f1:display=My automatic lists:prefix_separator=+:classes separator=-:family_owners_list=alist@domain.tld;name=family_two:prefix=f2:display=My other automatic lists:prefix_separator=+:classes separator=-:family_owners_list=anotherlist@domain.tld;
"parsed_family_files"
Parsed files for families
Format:
/"[-.\w]+"/
Default:
"message_header,message_header.mime,message_footer,message_footer.mime,info"
Context:
domain (robot.conf), site (sympa.conf)
comma-separated list of files that will be parsed by Sympa when instantiating a family (no
space allowed in file names)
"family_signoff"
Global unsubscription
Format:
Name of "family_signoff" scenario:
"auth" - need authentication
"closed" - impossible
Default:
"auth"
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
6.2.54 and later.
Tag based spam filtering
"antispam_feature"
Tag based spam filtering
Format:
"on" - enabled
"off" - disabled
Default:
"off"
Context:
domain (robot.conf), site (sympa.conf)
"antispam_tag_header_name"
Header field to tag spams
Format:
/"\S+"/
Default:
"X-Spam-Status"
Context:
domain (robot.conf), site (sympa.conf)
If a spam filter (like spamassassin or j-chkmail) add a header field to tag spams, name of
this header field (example X-Spam-Status)
"antispam_tag_header_spam_regexp"
Regular expression to check header field to tag spams
Format:
/".+"/
Default:
"^\s*Yes"
Context:
domain (robot.conf), site (sympa.conf)
Regular expression applied on this header to verify message is a spam (example Yes)
"antispam_tag_header_ham_regexp"
Regular expression to determine spam or ham.
Format:
/".+"/
Default:
"^\s*No"
Context:
domain (robot.conf), site (sympa.conf)
Regular expression applied on this header field to verify message is NOT a spam (example
No)
"spam_status"
Name of header field to inform
Format:
Name of "spam_status" scenario:
"x-spam-status" - test x-spam-status header
Default:
"x-spam-status"
Context:
domain (robot.conf), site (sympa.conf)
Messages are supposed to be filtered by an spam filter that adds them one or more headers.
This parameter is used to select a special scenario in order to decide the message's spam
status: ham, spam or unsure. This parameter replaces antispam_tag_header_name,
antispam_tag_header_spam_regexp and antispam_tag_header_ham_regexp.
Directories
"home"
List home
Format:
/".+"/
Default:
$EXPLDIR
Context:
site (sympa.conf)
Base directory of list configurations.
"etc"
Directory for configuration files
Format:
/".+"/
Default:
$SYSCONFDIR
Context:
site (sympa.conf)
Base directory of global configuration (except "sympa.conf").
"spool"
Base directory of spools
Format:
/".+"/
Default:
$SPOOLDIR
Context:
site (sympa.conf)
Base directory of all spools which are created at runtime. This directory must be writable
by Sympa user.
"queue"
Directory for message incoming spool
Format:
/".+"/
Default:
"$SPOOLDIR/msg"
Context:
site (sympa.conf)
This spool is used both by "queue" program and "sympa_msg.pl" daemon.
"queuemod"
Directory for moderation spool
Format:
/".+"/
Default:
"$SPOOLDIR/moderation"
Context:
site (sympa.conf)
"queuedigest"
Directory for digest spool
Format:
/".+"/
Default:
"$SPOOLDIR/digest"
Context:
site (sympa.conf)
"queueauth"
Directory for held message spool
Format:
/".+"/
Default:
"$SPOOLDIR/auth"
Context:
site (sympa.conf)
This parameter is named such by historical reason.
"queueoutgoing"
Directory for archive spool
Format:
/".+"/
Default:
"$SPOOLDIR/outgoing"
Context:
site (sympa.conf)
This parameter is named such by historical reason.
"queuesubscribe"
Directory for held request spool
Format:
/".+"/
Default:
"$SPOOLDIR/subscribe"
Context:
site (sympa.conf)
This parameter is named such by historical reason.
"queuetopic"
Directory for topic spool
Format:
/".+"/
Default:
"$SPOOLDIR/topic"
Context:
site (sympa.conf)
"queuebounce"
Directory for bounce incoming spool
Format:
/".+"/
Default:
"$SPOOLDIR/bounce"
Context:
site (sympa.conf)
This spool is used both by "bouncequeue" program and "bounced.pl" daemon.
"queuetask"
Directory for task spool
Format:
/".+"/
Default:
"$SPOOLDIR/task"
Context:
site (sympa.conf)
"queueautomatic"
Directory for automatic list creation spool
Format:
/".+"/
Default:
"$SPOOLDIR/automatic"
Context:
site (sympa.conf)
This spool is used both by "familyqueue" program and "sympa_automatic.pl" daemon.
"queuebulk"
Directory for message outgoing spool
Format:
/".+"/
Default:
"$SPOOLDIR/bulk"
Context:
site (sympa.conf)
Available versions:
6.2a.41 and later.
This parameter is named such by historical reason.
"tmpdir"
Temporary directory used by external programs such as virus scanner. Also, outputs to
daemons' standard error are redirected to the files under this directory.
Format:
/".+"/
Default:
"$SPOOLDIR/tmp"
Context:
site (sympa.conf)
"viewmail_dir"
Directory to cache formatted messages
Format:
/".+"/
Default:
"$SPOOLDIR/viewmail"
Context:
site (sympa.conf)
Base directory path of directories where HTML view of messages are cached.
"bounce_path"
Directory for storing bounces
Format:
/".+"/
Default:
$BOUNCEDIR
Context:
site (sympa.conf)
The directory where bounced.pl daemon will store the last bouncing message for each user.
A message is stored in the file: <bounce_path>/<list name>@<mail domain name>/<email
address>, or, if tracking is enabled: <bounce_path>/<list name>@<mail domain name>/<email
address>_<envelope ID>.
Users can access to these messages using web interface in the bounce management page.
Don't confuse with "queuebounce" parameter which defines the spool where incoming error
reports are stored and picked by bounced.pl daemon.
"arc_path"
Directory for storing archives
Format:
/".+"/
Default:
$ARCDIR
Context:
domain (robot.conf), site (sympa.conf)
Where to store HTML archives. This parameter is used by the "archived.pl" daemon. It is a
good idea to install the archive outside the web document hierarchy to prevent overcoming
of WWSympa's access control.
"purge_spools_task"
Task for cleaning spools
Format:
/"\w+"/
Default:
"daily"
Context:
site (sympa.conf)
Available versions:
6.2b.4 and later.
This task cleans old content in spools.
"clean_delay_queue"
Max age of incoming bad messages
Format:
Number of days.
Default:
7 (days)
Context:
site (sympa.conf)
Number of days "bad" messages are kept in message incoming spool (as specified by "queue"
parameter). Sympa keeps messages rejected for various reasons (badly formatted, looping
etc.).
"clean_delay_queueoutgoing"
Max age of bad messages for archives
Format:
Number of days.
Default:
7 (days)
Context:
site (sympa.conf)
Number of days "bad" messages are kept in message archive spool (as specified by
"queueoutgoing" parameter). Sympa keeps messages rejected for various reasons (unable to
create archive directory, to copy file etc.).
"clean_delay_queuebounce"
Max age of bad bounce messages
Format:
Number of days.
Default:
7 (days)
Context:
site (sympa.conf)
Number of days "bad" messages are kept in bounce spool (as specified by "queuebounce"
parameter). Sympa keeps messages rejected for various reasons (unknown original sender,
unknown report type).
"clean_delay_queueauth"
Max age of held messages
Format:
Number of days.
Default:
30 (days)
Context:
site (sympa.conf)
Number of days messages are kept in held message spool (as specified by "queueauth"
parameter). Beyond this deadline, messages that have not been confirmed are deleted.
"clean_delay_queuesubscribe"
Max age of held requests
Format:
Number of days.
Default:
30 (days)
Context:
site (sympa.conf)
Number of days requests are kept in held request spool (as specified by "queuesubscribe"
parameter). Beyond this deadline, requests that have not been validated nor declined are
deleted.
"clean_delay_queuetopic"
Max age of tagged topics
Format:
Number of days.
Default:
30 (days)
Context:
site (sympa.conf)
Number of days (automatically or manually) tagged topics are kept in topic spool (as
specified by "queuetopic" parameter). Beyond this deadline, tagging is forgotten.
"clean_delay_queueautomatic"
Max age of incoming bad messages in automatic list creation spool
Format:
Number of days.
Default:
10 (days)
Context:
site (sympa.conf)
Number of days "bad" messages are kept in automatic list creation spool (as specified by
"queueautomatic" parameter). Sympa keeps messages rejected for various reasons (badly
formatted, looping etc.).
"clean_delay_queuebulk"
Max age of outgoing bad messages
Format:
Number of days.
Default:
7 (days)
Context:
site (sympa.conf)
Number of days "bad" messages are kept in message outgoing spool (as specified by
"queuebulk" parameter). Sympa keeps messages rejected for various reasons (failed
personalization, bad configuration on MTA etc.).
"clean_delay_queuedigest"
Max age of bad messages in digest spool
Format:
Number of days.
Default:
14 (days)
Context:
site (sympa.conf)
Available versions:
6.2.6 and later.
Number of days "bad" messages are kept in digest spool (as specified by "queuedigest"
parameter). Sympa keeps messages rejected for various reasons (syntax errors in
"digest.tt2" template etc.).
"clean_delay_tmpdir"
Max age of temporary files
Format:
Number of days.
Default:
7 (days)
Context:
site (sympa.conf)
Number of days files in temporary directory (as specified by "tmpdir" parameter),
including standard error logs, are kept.
S/MIME and TLS
S/MIME authentication, decryption and re-encryption. It requires these external modules:
Crypt-OpenSSL-X509 and Crypt-SMIME.
TLS client authentication. It requires an external module: IO-Socket-SSL.
"cafile"
File containing trusted CA certificates
Format:
/".+"/
Default:
None.
Context:
site (sympa.conf)
Available versions:
3.3.6b.1 and later.
This can be used alternatively and/or additionally to "capath".
"capath"
Directory containing trusted CA certificates
Format:
/".+"/
Default:
None.
Context:
site (sympa.conf)
Available versions:
3.3.6b.1 and later.
CA certificates in this directory are used for client authentication.
The certificates need to have names including hash of subject, or symbolic links to them
with such names. The links may be created by using "c_rehash" script bundled in OpenSSL.
"key_passwd"
Password used to crypt lists private keys
Format:
The value to be concealed.
Default:
None.
Context:
site (sympa.conf)
If not defined, Sympa assumes that list private keys are not encrypted.
Example:
key_passwd your_password
"ssl_cert_dir"
Directory containing user certificates
Format:
/".+"/
Default:
"$EXPLDIR/X509-user-certs"
Context:
site (sympa.conf)
Data sources setup
Including subscribers, owners and moderators from data sources. Appropriate database
driver (DBD) modules are required: DBD-CSV, DBD-mysql, DBD-ODBC, DBD-Oracle, DBD-Pg, DBD-
SQLite and/or Net-LDAP. And also, if secure connection (LDAPS) to LDAP server is required:
IO-Socket-SSL.
"inclusion_notification_feature"
Notify subscribers when they are included from a data source?
Format:
"on" - enabled
"off" - disabled
Default:
"off"
Context:
list (config), site (sympa.conf)
"member_include"
(Paragraph) Subscribers defined in an external data source
Multiple occurrences allowed
"member_include.source"
the data source
Format:
/"[\w-]+"/
Default:
None, mandatory.
Context:
list (config)
"member_include.source_parameters"
data source parameters
Format:
/".*"/
Default:
None.
Context:
list (config)
"owner_include"
(Paragraph) Owners defined in an external data source
Multiple occurrences allowed
"owner_include.source"
the data source
Format:
/"[\w-]+"/
Default:
None, mandatory.
Context:
list (config)
"owner_include.source_parameters"
data source parameters
Format:
/".*"/
Default:
None.
Context:
list (config)
"owner_include.profile"
profile
Format:
"privileged" - privileged owner
"normal" - normal owner
Default:
"normal"
Context:
list (config)
"owner_include.reception"
reception mode
Format:
"mail" - receive notification email
"nomail" - no notifications
Default:
"mail"
Context:
list (config)
"owner_include.visibility"
visibility
Format:
"conceal" - concealed from list menu
"noconceal" - listed on the list menu
Default:
"noconceal"
Context:
list (config)
"editor_include"
(Paragraph) Moderators defined in an external data source
Multiple occurrences allowed
"editor_include.source"
the data source
Format:
/"[\w-]+"/
Default:
None, mandatory.
Context:
list (config)
"editor_include.source_parameters"
data source parameters
Format:
/".*"/
Default:
None.
Context:
list (config)
"editor_include.reception"
reception mode
Format:
"mail" - receive notification email
"nomail" - no notifications
Default:
"mail"
Context:
list (config)
"editor_include.visibility"
visibility
Format:
"conceal" - concealed from list menu
"noconceal" - listed on the list menu
Default:
"noconceal"
Context:
list (config)
"sql_fetch_timeout"
Timeout for fetch of include_sql_query
Format:
Number of seconds.
Default:
300 (seconds)
Context:
list (config), site (sympa.conf)
Available versions:
6.2a.0 and later.
"include_file"
File inclusion
Format:
Multiple occurrences allowed.
/"\S+"/
Default:
None.
Context:
list (config)
Include subscribers from this file. The file should contain one e-mail address per line
(lines beginning with a "#" are ignored).
"include_remote_file"
(Paragraph) Remote file inclusion
Multiple occurrences allowed
"include_remote_file.name"
short name for this source
Format:
/".+"/
Default:
None.
Context:
list (config)
"include_remote_file.url"
data location URL
Format:
/".+"/
Default:
None, mandatory.
Context:
list (config)
"include_remote_file.user"
remote user
Format:
/".+"/
Default:
None.
Context:
list (config)
"include_remote_file.passwd"
remote password
Format:
The value to be concealed.
Default:
None.
Context:
list (config)
"include_remote_file.timeout"
idle timeout
Format:
Number of seconds.
Default:
180 (seconds)
Context:
list (config)
"include_remote_file.ssl_version"
SSL version
Format:
"ssl_any" - any versions
"sslv2" - SSL version 2
"sslv3" - SSL version 3
"tlsv1" - TLS version 1
"tlsv1_1" - TLS version 1.1
"tlsv1_2" - TLS version 1.2
"tlsv1_3" - TLS version 1.3
Default:
"ssl_any"
Context:
list (config)
"include_remote_file.ssl_ciphers"
SSL ciphers used
Format:
/".+"/
Default:
"ALL"
Context:
list (config)
"include_remote_file.ca_verify"
Certificate verification
Format:
"none" - do nothing
"optional" - optional
"required" - required
Default:
"none"
Context:
list (config)
"include_remote_file.nosync_time_ranges"
Time ranges when inclusion is not allowed
Format:
/$time_ranges/
Default:
None.
Context:
list (config)
"include_sympa_list"
(Paragraph) List inclusion
Multiple occurrences allowed
Include subscribers from other list. All subscribers of list listname become subscribers
of the current list. You may include as many lists as required, using one
include_sympa_list paragraph for each included list. Any list at all may be included; you
may therefore include lists which are also defined by the inclusion of other lists. Be
careful, however, not to include list A in list B and then list B in list A, since this
will give rise to an infinite loop.
"include_sympa_list.name"
short name for this source
Format:
/".+"/
Default:
None.
Context:
list (config)
"include_sympa_list.listname"
list name to include
Format:
/"$listname(\@$host)?"/
Default:
None, mandatory.
Context:
list (config)
"include_sympa_list.filter"
filter definition
Format:
/".*"/
Default:
None.
Context:
list (config)
"include_sympa_list.nosync_time_ranges"
Time ranges when inclusion is not allowed
Format:
/$time_ranges/
Default:
None.
Context:
list (config)
"include_remote_sympa_list"
(Paragraph) remote list inclusion
Multiple occurrences allowed
Sympa can contact another Sympa service using HTTPS to fetch a remote list in order to
include each member of a remote list as subscriber. You may include as many lists as
required, using one include_remote_sympa_list paragraph for each included list. Be
careful, however, not to give rise to an infinite loop resulting from cross includes.
For this operation, one Sympa site acts as a server while the other one acs as client. On
the server side, the only setting needed is to give permission to the remote Sympa to
review the list. This is controlled by the review scenario.
"include_remote_sympa_list.name"
short name for this source
Format:
/".+"/
Default:
None.
Context:
list (config)
"include_remote_sympa_list.url"
data location URL
Format:
/".+"/
Default:
None.
Context:
list (config)
Available versions:
6.2.45b.1 and later.
"include_remote_sympa_list.user"
remote user
Format:
/".+"/
Default:
None.
Context:
list (config)
Available versions:
6.2.45b.1 and later.
"include_remote_sympa_list.passwd"
remote password
Format:
The value to be concealed.
Default:
None.
Context:
list (config)
Available versions:
6.2.45b.1 and later.
"include_remote_sympa_list.host"
remote host
Format:
/$host/
Default:
None, mandatory.
Context:
list (config)
obsoleted. Use "data location URL".
"include_remote_sympa_list.port"
remote port
Format:
/"\d+"/
Default:
443
Context:
list (config)
obsoleted. Use "data location URL".
"include_remote_sympa_list.path"
remote path of sympa list dump
Format:
/"\S+"/
Default:
None, mandatory.
Context:
list (config)
obsoleted. Use "data location URL".
"include_remote_sympa_list.cert"
Deprecated.
Context:
list (config)
Available versions:
up to 6.2.44.
"include_remote_sympa_list.timeout"
idle timeout
Format:
Number of seconds.
Default:
180 (seconds)
Context:
list (config)
Available versions:
6.2.45b.1 and later.
"include_remote_sympa_list.ssl_version"
SSL version
Format:
"ssl_any" - any versions
"sslv2" - SSL version 2
"sslv3" - SSL version 3
"tlsv1" - TLS version 1
"tlsv1_1" - TLS version 1.1
"tlsv1_2" - TLS version 1.2
"tlsv1_3" - TLS version 1.3
Default:
"ssl_any"
Context:
list (config)
Available versions:
6.2.45b.1 and later.
"include_remote_sympa_list.ssl_ciphers"
SSL ciphers used
Format:
/".+"/
Default:
"ALL"
Context:
list (config)
Available versions:
6.2.45b.1 and later.
"include_remote_sympa_list.ca_verify"
Certificate verification
Format:
"none" - do nothing
"optional" - optional
"required" - required
Default:
"optional"
Context:
list (config)
Available versions:
6.2.45b.1 and later.
"include_remote_sympa_list.nosync_time_ranges"
Time ranges when inclusion is not allowed
Format:
/$time_ranges/
Default:
None.
Context:
list (config)
"include_ldap_query"
(Paragraph) LDAP query inclusion
Multiple occurrences allowed
This paragraph defines parameters for a query returning a list of subscribers. This
feature requires the Net::LDAP (perlldap) PERL module.
"include_ldap_query.name"
short name for this source
Format:
/".+"/
Default:
None.
Context:
list (config)
"include_ldap_query.host"
remote host
Format:
/$multiple_host_or_url/
Default:
None, mandatory.
Context:
list (config)
"include_ldap_query.port"
Deprecated.
Context:
list (config)
"include_ldap_query.use_tls"
use TLS (formerly SSL)
Format:
"starttls" - use STARTTLS
"ldaps" - use LDAPS (LDAP over TLS)
"none" - do nothing
Default:
"none"
Context:
list (config)
Available versions:
6.2.15 and later.
"include_ldap_query.ssl_version"
SSL version
Format:
"sslv2" - SSL version 2
"sslv3" - SSL version 3
"tlsv1" - TLS version 1
"tlsv1_1" - TLS version 1.1
"tlsv1_2" - TLS version 1.2
"tlsv1_3" - TLS version 1.3
Default:
"tlsv1"
Context:
list (config)
"include_ldap_query.ssl_ciphers"
SSL ciphers used
Format:
/".+"/
Default:
"ALL"
Context:
list (config)
"include_ldap_query.ca_verify"
Certificate verification
Format:
"none" - do nothing
"optional" - optional
"required" - required
Default:
"required"
Context:
list (config)
Available versions:
6.2.13 and later.
"include_ldap_query.bind_dn"
remote user
Format:
/".+"/
Default:
None.
Context:
list (config)
Available versions:
6.2.57b.1 and later.
"include_ldap_query.bind_password"
remote password
Format:
The value to be concealed.
Default:
None.
Context:
list (config)
Available versions:
6.2.57b.1 and later.
"include_ldap_query.suffix"
suffix
Format:
/".+"/
Default:
None.
Context:
list (config)
"include_ldap_query.scope"
search scope
Format:
"base" - base
"one" - one level
"sub" - subtree
Default:
"sub"
Context:
list (config)
"include_ldap_query.timeout"
connection timeout
Format:
Number of seconds.
Default:
30 (seconds)
Context:
list (config)
"include_ldap_query.filter"
filter
Format:
/".+"/
Default:
None, mandatory.
Context:
list (config)
"include_ldap_query.attrs"
extracted attribute
Format:
/"$ldap_attrdesc(\s*,\s*$ldap_attrdesc)?"/
Default:
"mail"
Context:
list (config)
"include_ldap_query.select"
selection (if multiple)
Format:
"all" - all
"first" - first entry
"regex" - entries matching regular expression
Default:
"first"
Context:
list (config)
"include_ldap_query.regex"
regular expression
Format:
/".+"/
Default:
""
Context:
list (config)
"include_ldap_query.nosync_time_ranges"
Time ranges when inclusion is not allowed
Format:
/$time_ranges/
Default:
None.
Context:
list (config)
Available versions:
6.2a.16 and later.
"include_ldap_query.passwd"
See "bind_password".
Context:
list (config)
Available versions:
up to 6.2.56.
"include_ldap_query.use_ssl"
See "use_tls".
Context:
list (config)
Available versions:
5.3a.2 to 6.2.14.
"include_ldap_query.user"
See "bind_dn".
Context:
list (config)
Available versions:
up to 6.2.56.
"include_ldap_2level_query"
(Paragraph) LDAP 2-level query inclusion
Multiple occurrences allowed
This paragraph defines parameters for a two-level query returning a list of subscribers.
Usually the first-level query returns a list of DNs and the second-level queries convert
the DNs into e-mail addresses. This feature requires the Net::LDAP (perlldap) PERL module.
"include_ldap_2level_query.name"
short name for this source
Format:
/".+"/
Default:
None.
Context:
list (config)
"include_ldap_2level_query.host"
remote host
Format:
/$multiple_host_or_url/
Default:
None, mandatory.
Context:
list (config)
"include_ldap_2level_query.port"
Deprecated.
Context:
list (config)
"include_ldap_2level_query.use_tls"
use TLS (formerly SSL)
Format:
"starttls" - use STARTTLS
"ldaps" - use LDAPS (LDAP over TLS)
"none" - do nothing
Default:
"none"
Context:
list (config)
Available versions:
6.2.15 and later.
"include_ldap_2level_query.ssl_version"
SSL version
Format:
"sslv2" - SSL version 2
"sslv3" - SSL version 3
"tlsv1" - TLS version 1
"tlsv1_1" - TLS version 1.1
"tlsv1_2" - TLS version 1.2
"tlsv1_3" - TLS version 1.3
Default:
"tlsv1"
Context:
list (config)
"include_ldap_2level_query.ssl_ciphers"
SSL ciphers used
Format:
/".+"/
Default:
"ALL"
Context:
list (config)
"include_ldap_2level_query.ca_verify"
Certificate verification
Format:
"none" - do nothing
"optional" - optional
"required" - required
Default:
"required"
Context:
list (config)
Available versions:
6.2.13 and later.
"include_ldap_2level_query.bind_dn"
remote user
Format:
/".+"/
Default:
None.
Context:
list (config)
Available versions:
6.2.57b.1 and later.
"include_ldap_2level_query.bind_password"
remote password
Format:
The value to be concealed.
Default:
None.
Context:
list (config)
Available versions:
6.2.57b.1 and later.
"include_ldap_2level_query.suffix1"
first-level suffix
Format:
/".+"/
Default:
None.
Context:
list (config)
"include_ldap_2level_query.scope1"
first-level search scope
Format:
"base" - base
"one" - one level
"sub" - subtree
Default:
"sub"
Context:
list (config)
"include_ldap_2level_query.timeout1"
first-level connection timeout
Format:
Number of seconds.
Default:
30 (seconds)
Context:
list (config)
"include_ldap_2level_query.filter1"
first-level filter
Format:
/".+"/
Default:
None, mandatory.
Context:
list (config)
"include_ldap_2level_query.attrs1"
first-level extracted attribute
Format:
/$ldap_attrdesc/
Default:
None.
Context:
list (config)
"include_ldap_2level_query.select1"
first-level selection
Format:
"all" - all
"first" - first entry
"regex" - entries matching regular expression
Default:
"first"
Context:
list (config)
"include_ldap_2level_query.regex1"
first-level regular expression
Format:
/".+"/
Default:
""
Context:
list (config)
"include_ldap_2level_query.suffix2"
second-level suffix template
Format:
/".+"/
Default:
None.
Context:
list (config)
"include_ldap_2level_query.scope2"
second-level search scope
Format:
"base" - base
"one" - one level
"sub" - subtree
Default:
"sub"
Context:
list (config)
"include_ldap_2level_query.timeout2"
second-level connection timeout
Format:
Number of seconds.
Default:
30 (seconds)
Context:
list (config)
"include_ldap_2level_query.filter2"
second-level filter template
Format:
/".+"/
Default:
None, mandatory.
Context:
list (config)
"include_ldap_2level_query.attrs2"
second-level extracted attribute
Format:
/"$ldap_attrdesc(\s*,\s*$ldap_attrdesc)?"/
Default:
"mail"
Context:
list (config)
"include_ldap_2level_query.select2"
second-level selection
Format:
"all" - all
"first" - first entry
"regex" - entries matching regular expression
Default:
"first"
Context:
list (config)
"include_ldap_2level_query.regex2"
second-level regular expression
Format:
/".+"/
Default:
""
Context:
list (config)
"include_ldap_2level_query.nosync_time_ranges"
Time ranges when inclusion is not allowed
Format:
/$time_ranges/
Default:
None.
Context:
list (config)
Available versions:
6.2a.16 and later.
"include_ldap_2level_query.passwd"
See "bind_password".
Context:
list (config)
Available versions:
up to 6.2.56.
"include_ldap_2level_query.use_ssl"
See "use_tls".
Context:
list (config)
Available versions:
5.3a.2 to 6.2.14.
"include_ldap_2level_query.user"
See "bind_dn".
Context:
list (config)
Available versions:
up to 6.2.56.
"include_sql_query"
(Paragraph) SQL query inclusion
Multiple occurrences allowed
This parameter is used to define the SQL query parameters.
"include_sql_query.name"
short name for this source
Format:
/".+"/
Default:
None.
Context:
list (config)
"include_sql_query.db_type"
database type
Format:
/"\S+"/
Default:
None, mandatory.
Context:
list (config)
"include_sql_query.db_host"
remote host
Format:
/$host/
Default:
None.
Context:
list (config)
Available versions:
6.2.57b.1 and later.
"include_sql_query.db_port"
database port
Format:
/"\d+"/
Default:
None.
Context:
list (config)
"include_sql_query.db_name"
database name
Format:
/"\S+"/
Default:
None, mandatory.
Context:
list (config)
"include_sql_query.db_options"
connection options
Format:
/".+"/
Default:
None.
Context:
list (config)
Available versions:
6.2.57b.1 and later.
"include_sql_query.db_env"
environment variables for database connection
Format:
/"\w+\=\S+(;\w+\=\S+)*"/
Default:
None.
Context:
list (config)
"include_sql_query.db_user"
remote user
Format:
/"\S+"/
Default:
None, mandatory.
Context:
list (config)
Available versions:
6.2.57b.1 and later.
"include_sql_query.db_passwd"
remote password
Format:
The value to be concealed.
Default:
None.
Context:
list (config)
Available versions:
6.2.57b.1 and later.
"include_sql_query.sql_query"
SQL query
Format:
/$sql_query/
Default:
None, mandatory.
Context:
list (config)
"include_sql_query.f_dir"
Directory where the database is stored (used for DBD::CSV only)
Format:
/".+"/
Default:
None.
Context:
list (config)
"include_sql_query.nosync_time_ranges"
Time ranges when inclusion is not allowed
Format:
/$time_ranges/
Default:
None.
Context:
list (config)
Available versions:
6.2a.16 and later.
"include_sql_query.connect_options"
See "db_options".
Context:
list (config)
Available versions:
up to 6.2.56.
"include_sql_query.host"
See "db_host".
Context:
list (config)
Available versions:
up to 6.2.56.
"include_sql_query.passwd"
See "db_passwd".
Context:
list (config)
Available versions:
up to 6.2.56.
"include_sql_query.user"
See "db_user".
Context:
list (config)
Available versions:
up to 6.2.56.
"ttl"
Inclusions timeout
Format:
Number of seconds.
Default:
3600 (seconds)
Context:
list (config), site (sympa.conf)
Sympa caches user data extracted using the include parameter. Their TTL (time-to-live)
within Sympa can be controlled using this parameter. The default value is 3600
"distribution_ttl"
Inclusions timeout for message distribution
Format:
Number of seconds.
Default:
None.
Context:
list (config), site (sympa.conf)
This parameter defines the delay since the last synchronization after which the user's
list will be updated before performing either of following actions:
* Reviewing list members
* Message distribution
"include_ldap_ca"
(Paragraph) LDAP query custom attribute
Multiple occurrences allowed
"include_ldap_ca.name"
short name for this source
Format:
/".+"/
Default:
None.
Context:
list (config)
"include_ldap_ca.host"
remote host
Format:
/$multiple_host_or_url/
Default:
None, mandatory.
Context:
list (config)
"include_ldap_ca.port"
Deprecated.
Context:
list (config)
"include_ldap_ca.use_tls"
use TLS (formerly SSL)
Format:
"starttls" - use STARTTLS
"ldaps" - use LDAPS (LDAP over TLS)
"none" - do nothing
Default:
"none"
Context:
list (config)
Available versions:
6.2.15 and later.
"include_ldap_ca.ssl_version"
SSL version
Format:
"sslv2" - SSL version 2
"sslv3" - SSL version 3
"tlsv1" - TLS version 1
"tlsv1_1" - TLS version 1.1
"tlsv1_2" - TLS version 1.2
"tlsv1_3" - TLS version 1.3
Default:
"tlsv1"
Context:
list (config)
"include_ldap_ca.ssl_ciphers"
SSL ciphers used
Format:
/".+"/
Default:
"ALL"
Context:
list (config)
"include_ldap_ca.ca_verify"
Certificate verification
Format:
"none" - do nothing
"optional" - optional
"required" - required
Default:
"required"
Context:
list (config)
Available versions:
6.2.13 and later.
"include_ldap_ca.bind_dn"
remote user
Format:
/".+"/
Default:
None.
Context:
list (config)
Available versions:
6.2.57b.1 and later.
"include_ldap_ca.bind_password"
remote password
Format:
The value to be concealed.
Default:
None.
Context:
list (config)
Available versions:
6.2.57b.1 and later.
"include_ldap_ca.suffix"
suffix
Format:
/".+"/
Default:
None.
Context:
list (config)
"include_ldap_ca.scope"
search scope
Format:
"base" - base
"one" - one level
"sub" - subtree
Default:
"sub"
Context:
list (config)
"include_ldap_ca.timeout"
connection timeout
Format:
Number of seconds.
Default:
30 (seconds)
Context:
list (config)
"include_ldap_ca.filter"
filter
Format:
/".+"/
Default:
None, mandatory.
Context:
list (config)
"include_ldap_ca.attrs"
extracted attribute
Format:
/"$ldap_attrdesc(\s*,\s*$ldap_attrdesc)?"/
Default:
"mail"
Context:
list (config)
"include_ldap_ca.email_entry"
Name of email entry
Format:
/"\S+"/
Default:
None, mandatory.
Context:
list (config)
"include_ldap_ca.select"
selection (if multiple)
Format:
"all" - all
"first" - first entry
"regex" - entries matching regular expression
Default:
"first"
Context:
list (config)
"include_ldap_ca.regex"
regular expression
Format:
/".+"/
Default:
""
Context:
list (config)
"include_ldap_ca.nosync_time_ranges"
Time ranges when inclusion is not allowed
Format:
/$time_ranges/
Default:
None.
Context:
list (config)
"include_ldap_ca.passwd"
See "bind_password".
Context:
list (config)
Available versions:
up to 6.2.56.
"include_ldap_ca.use_ssl"
See "use_tls".
Context:
list (config)
Available versions:
6.2a? to 6.2.14.
"include_ldap_ca.user"
See "bind_dn".
Context:
list (config)
Available versions:
up to 6.2.56.
"include_ldap_2level_ca"
(Paragraph) LDAP 2-level query custom attribute
Multiple occurrences allowed
"include_ldap_2level_ca.name"
short name for this source
Format:
/".+"/
Default:
None.
Context:
list (config)
"include_ldap_2level_ca.host"
remote host
Format:
/$multiple_host_or_url/
Default:
None, mandatory.
Context:
list (config)
"include_ldap_2level_ca.port"
Deprecated.
Context:
list (config)
"include_ldap_2level_ca.use_tls"
use TLS (formerly SSL)
Format:
"starttls" - use STARTTLS
"ldaps" - use LDAPS (LDAP over TLS)
"none" - do nothing
Default:
"none"
Context:
list (config)
Available versions:
6.2.15 and later.
"include_ldap_2level_ca.ssl_version"
SSL version
Format:
"sslv2" - SSL version 2
"sslv3" - SSL version 3
"tlsv1" - TLS version 1
"tlsv1_1" - TLS version 1.1
"tlsv1_2" - TLS version 1.2
"tlsv1_3" - TLS version 1.3
Default:
"tlsv1"
Context:
list (config)
"include_ldap_2level_ca.ssl_ciphers"
SSL ciphers used
Format:
/".+"/
Default:
"ALL"
Context:
list (config)
"include_ldap_2level_ca.ca_verify"
Certificate verification
Format:
"none" - do nothing
"optional" - optional
"required" - required
Default:
"required"
Context:
list (config)
Available versions:
6.2.13 and later.
"include_ldap_2level_ca.bind_dn"
remote user
Format:
/".+"/
Default:
None.
Context:
list (config)
Available versions:
6.2.57b.1 and later.
"include_ldap_2level_ca.bind_password"
remote password
Format:
The value to be concealed.
Default:
None.
Context:
list (config)
Available versions:
6.2.57b.1 and later.
"include_ldap_2level_ca.suffix1"
first-level suffix
Format:
/".+"/
Default:
None.
Context:
list (config)
"include_ldap_2level_ca.scope1"
first-level search scope
Format:
"base" - base
"one" - one level
"sub" - subtree
Default:
"sub"
Context:
list (config)
"include_ldap_2level_ca.timeout1"
first-level connection timeout
Format:
Number of seconds.
Default:
30 (seconds)
Context:
list (config)
"include_ldap_2level_ca.filter1"
first-level filter
Format:
/".+"/
Default:
None, mandatory.
Context:
list (config)
"include_ldap_2level_ca.attrs1"
first-level extracted attribute
Format:
/$ldap_attrdesc/
Default:
None.
Context:
list (config)
"include_ldap_2level_ca.select1"
first-level selection
Format:
"all" - all
"first" - first entry
"regex" - entries matching regular expression
Default:
"first"
Context:
list (config)
"include_ldap_2level_ca.regex1"
first-level regular expression
Format:
/".+"/
Default:
""
Context:
list (config)
"include_ldap_2level_ca.suffix2"
second-level suffix template
Format:
/".+"/
Default:
None.
Context:
list (config)
"include_ldap_2level_ca.scope2"
second-level search scope
Format:
"base" - base
"one" - one level
"sub" - subtree
Default:
"sub"
Context:
list (config)
"include_ldap_2level_ca.timeout2"
second-level connection timeout
Format:
Number of seconds.
Default:
30 (seconds)
Context:
list (config)
"include_ldap_2level_ca.filter2"
second-level filter template
Format:
/".+"/
Default:
None, mandatory.
Context:
list (config)
"include_ldap_2level_ca.attrs2"
second-level extracted attribute
Format:
/$ldap_attrdesc/
Default:
"mail"
Context:
list (config)
"include_ldap_2level_ca.select2"
second-level selection
Format:
"all" - all
"first" - first entry
"regex" - entries matching regular expression
Default:
"first"
Context:
list (config)
"include_ldap_2level_ca.regex2"
second-level regular expression
Format:
/".+"/
Default:
""
Context:
list (config)
"include_ldap_2level_ca.email_entry"
Name of email entry
Format:
/"\S+"/
Default:
None, mandatory.
Context:
list (config)
"include_ldap_2level_ca.nosync_time_ranges"
Time ranges when inclusion is not allowed
Format:
/$time_ranges/
Default:
None.
Context:
list (config)
"include_ldap_2level_ca.passwd"
See "bind_password".
Context:
list (config)
Available versions:
up to 6.2.56.
"include_ldap_2level_ca.use_ssl"
See "use_tls".
Context:
list (config)
Available versions:
6.2a? to 6.2.14.
"include_ldap_2level_ca.user"
See "bind_dn".
Context:
list (config)
Available versions:
up to 6.2.56.
"include_sql_ca"
(Paragraph) SQL query custom attribute
Multiple occurrences allowed
"include_sql_ca.name"
short name for this source
Format:
/".+"/
Default:
None.
Context:
list (config)
"include_sql_ca.db_type"
database type
Format:
/"\S+"/
Default:
None, mandatory.
Context:
list (config)
"include_sql_ca.db_host"
remote host
Format:
/$host/
Default:
None.
Context:
list (config)
Available versions:
6.2.57b.1 and later.
"include_sql_ca.db_port"
database port
Format:
/"\d+"/
Default:
None.
Context:
list (config)
"include_sql_ca.db_name"
database name
Format:
/"\S+"/
Default:
None, mandatory.
Context:
list (config)
"include_sql_ca.db_options"
connection options
Format:
/".+"/
Default:
None.
Context:
list (config)
Available versions:
6.2.57b.1 and later.
"include_sql_ca.db_env"
environment variables for database connection
Format:
/"\w+\=\S+(;\w+\=\S+)*"/
Default:
None.
Context:
list (config)
"include_sql_ca.db_user"
remote user
Format:
/"\S+"/
Default:
None, mandatory.
Context:
list (config)
Available versions:
6.2.57b.1 and later.
"include_sql_ca.db_passwd"
remote password
Format:
The value to be concealed.
Default:
None.
Context:
list (config)
Available versions:
6.2.57b.1 and later.
"include_sql_ca.sql_query"
SQL query
Format:
/$sql_query/
Default:
None, mandatory.
Context:
list (config)
"include_sql_ca.f_dir"
Directory where the database is stored (used for DBD::CSV only)
Format:
/".+"/
Default:
None.
Context:
list (config)
"include_sql_ca.email_entry"
Name of email entry
Format:
/"\S+"/
Default:
None, mandatory.
Context:
list (config)
"include_sql_ca.nosync_time_ranges"
Time ranges when inclusion is not allowed
Format:
/$time_ranges/
Default:
None.
Context:
list (config)
"include_sql_ca.connect_options"
See "db_options".
Context:
list (config)
Available versions:
up to 6.2.56.
"include_sql_ca.host"
See "db_host".
Context:
list (config)
Available versions:
up to 6.2.56.
"include_sql_ca.passwd"
See "db_passwd".
Context:
list (config)
Available versions:
up to 6.2.56.
"include_sql_ca.user"
See "db_user".
Context:
list (config)
Available versions:
up to 6.2.56.
DKIM/DMARC/ARC
DKIM signature verification and re-signing. It requires an external module: Mail-DKIM.
ARC seals on forwarded messages. It requires an external module: Mail-DKIM.
"dkim_add_signature_to"
Which service messages to be signed
Format:
/"(?:list|robot)(?:,(?:list|robot))*"/
Default:
"robot,list"
Context:
domain (robot.conf), site (sympa.conf)
Inserts a DKIM signature to service messages in context of robot, list or both
"dkim_signer_identity"
The "i=" tag as defined in rfc 4871
Format:
/"\S+"/
Default:
None.
Context:
domain (robot.conf), site (sympa.conf)
Default is null.
"dkim_feature"
Insert DKIM signature to messages sent to the list
Format:
"on" - enabled
"off" - disabled
Default:
"off"
Context:
domain (robot.conf), site (sympa.conf)
If set to "on", Sympa may verify DKIM signatures of incoming messages and/or insert DKIM
signature to outgoing messages.
"dkim_parameters"
(Paragraph) DKIM configuration
Single occurrence
A set of parameters in order to define outgoing DKIM signature
"dkim_parameters.private_key_path"
File path for DKIM private key
Format:
/"\S+"/
Default:
None.
Context:
list (config), domain (robot.conf), site (sympa.conf)
The file must contain a PEM encoded private key
"dkim_parameters.selector"
Selector for DNS lookup of DKIM public key
Format:
/"\S+"/
Default:
None.
Context:
list (config), domain (robot.conf), site (sympa.conf)
The selector is used in order to build the DNS query for public key. It is up to you to
choose the value you want but verify that you can query the public DKIM key for
"<selector>._domainkey.your_domain"
"dkim_parameters.header_list"
Deprecated.
Context:
list (config), domain (robot.conf), site (sympa.conf)
"dkim_parameters.signer_domain"
DKIM "d=" tag, you should probably use the default value
Format:
/"\S+"/
Default:
None.
Context:
list (config), domain (robot.conf), site (sympa.conf)
The DKIM "d=" tag, is the domain of the signing entity. The list domain MUST be included
in the "d=" domain
"dkim_parameters.signer_identity"
DKIM "i=" tag, you should probably leave this parameter empty
Format:
/"\S+"/
Default:
None.
Context:
list (config)
DKIM "i=" tag, you should probably not use this parameter, as recommended by RFC 4871,
default for list brodcasted messages is i=<listname>-request@<domain>
"dkim_signature_apply_on"
The categories of messages sent to the list that will be signed using DKIM.
Format:
Multiple values allowed, separated by "","".
"md5_authenticated_messages" - authenticated by password
"smime_authenticated_messages" - authenticated by S/MIME signature
"dkim_authenticated_messages" - authenticated by DKIM signature
"editor_validated_messages" - approved by moderator
"none" - do nothing
"any" - any messages
Default:
"md5_authenticated_messages,smime_authenticated_messages,dkim_authenticated_messages,editor_validated_messages"
Context:
list (config), domain (robot.conf), site (sympa.conf)
This parameter controls in which case messages must be signed using DKIM, you may sign
every message choosing 'any' or a subset. The parameter value is a comma separated list of
keywords
"arc_feature"
Add ARC seals to messages sent to the list
Format:
"on" - enabled
"off" - disabled
Default:
"off"
Context:
list (config), domain (robot.conf), site (sympa.conf)
Available versions:
6.2.37b.1 and later.
Enable/Disable ARC. This feature requires Mail::DKIM::ARC to be installed, and maybe some
custom scenario to be updated
"arc_srvid"
SRV ID for Authentication-Results used in ARC seal
Format:
/"\S+"/
Default:
None.
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
6.2.37b.1 and later.
Typically the domain of the mail server
"arc_parameters"
(Paragraph) ARC configuration
Single occurrence
A set of parameters in order to define outgoing ARC seal
"arc_parameters.arc_private_key_path"
File path for ARC private key
Format:
/"\S+"/
Default:
None.
Context:
list (config), domain (robot.conf), site (sympa.conf)
The file must contain a PEM encoded private key. Defaults to same file as DKIM private key
"arc_parameters.arc_selector"
Selector for DNS lookup of ARC public key
Format:
/"\S+"/
Default:
None.
Context:
list (config), domain (robot.conf), site (sympa.conf)
The selector is used in order to build the DNS query for public key. It is up to you to
choose the value you want but verify that you can query the public DKIM key for
"<selector>._domainkey.your_domain". Default is the same selector as for DKIM signatures
"arc_parameters.arc_signer_domain"
ARC "d=" tag, you should probably use the default value
Format:
/"\S+"/
Default:
None.
Context:
list (config), domain (robot.conf), site (sympa.conf)
The ARC "d=" tag is the domain of the signing entity. The DKIM d= domain name is used as
its default value
"dmarc_protection"
(Paragraph) DMARC Protection
Single occurrence
Parameters to define how to manage From address processing to avoid some domains'
excessive DMARC protection
"dmarc_protection.mode"
Protection modes
Format:
Multiple values allowed, separated by "","".
"none" - do nothing
"all" - all
"dkim_signature" - DKIM signature exists
"dmarc_reject" - DMARC policy suggests rejection
"dmarc_any" - DMARC policy exists
"dmarc_quarantine" - DMARC policy suggests quarantine
"domain_regex" - domain matching regular expression
Default:
None.
Context:
list (config), domain (robot.conf), site (sympa.conf)
Select one or more operation modes. "Domain matching regular expression" (domain_regex)
matches the specified Domain regular expression; "DKIM signature exists" (dkim_signature)
matches any message with a DKIM signature header; "DMARC policy ..." (dmarc_*) matches
messages from sender domains with a DMARC policy as given; "all" (all) matches all
messages.
Example:
dmarc_protection.mode dmarc_reject,dkim_signature
"dmarc_protection.domain_regex"
Regular expression for domain name match
Format:
/".+"/
Default:
None.
Context:
list (config), domain (robot.conf), site (sympa.conf)
Regular expression match pattern for From domain
"dmarc_protection.other_email"
New From address
Format:
/".+"/
Default:
None.
Context:
list (config), domain (robot.conf), site (sympa.conf)
This is the email address to use when modifying the From header. It defaults to the list
address. This is similar to Anonymisation but preserves the original sender details in
the From address phrase.
"dmarc_protection.phrase"
New From name format
Format:
"display_name" - "Name"
"name_and_email" - "Name" (e-mail)
"name_via_list" - "Name" (via List)
"name_email_via_list" - "Name" (e-mail via List)
"list_for_email" - "List" (on behalf of e-mail)
"list_for_name" - "List" (on behalf of Name)
Default:
"name_via_list"
Context:
list (config), domain (robot.conf), site (sympa.conf)
This is the format to be used for the sender name part of the new From header field.
List address verification
Checks if an alias with the same name as the list to be created already exists on the SMTP
server. This feature requires an external module: Net-SMTP.
"list_check_helo"
SMTP HELO (EHLO) parameter used for address verification
Format:
/"\S+"/
Default:
None.
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
6.2a.0 and later.
Default value is the host part of "list_check_smtp" parameter.
"list_check_smtp"
SMTP server to verify existence of the same addresses as the list to be created
Format:
/$hostport/
Default:
None.
Context:
domain (robot.conf), site (sympa.conf)
This is needed if you are running Sympa on a host but you handle all your mail on a
separate mail relay.
Default value is real FQDN of the host. Port number may be specified as
"mail.example.org:25" or "203.0.113.1:25". If port is not specified, standard port (25)
will be used.
"list_check_suffixes"
Address suffixes to verify
Format:
/"\S+"/
Default:
"request,owner,editor,unsubscribe,subscribe"
Context:
domain (robot.conf), site (sympa.conf)
List of suffixes you are using for list addresses, i.e. "mylist-request", "mylist-owner"
and so on.
This parameter is used with the "list_check_smtp" parameter. It is also used to check list
names at list creation time.
Antivirus plug-in
"antivirus_path"
Path to the antivirus scanner engine
Format:
/".+"/
Default:
None.
Context:
domain (robot.conf), site (sympa.conf)
Supported antivirus: Clam AntiVirus/clamscan & clamdscan, McAfee/uvscan, Fsecure/fsav,
Sophos, AVP and Trend Micro/VirusWall
Example:
antivirus_path /usr/local/bin/clamscan
"antivirus_args"
Antivirus plugin command line arguments
Format:
/".+"/
Default:
None.
Context:
domain (robot.conf), site (sympa.conf)
Example:
antivirus_args --no-summary --database /usr/local/share/clamav
"antivirus_notify"
Notify sender if virus checker detects malicious content
Format:
"sender" - sender
"delivery_status" - send back DSN
"none" - do nothing
Default:
"sender"
Context:
domain (robot.conf), site (sympa.conf)
"sender" to notify originator of the message, "delivery_status" to send delivery status,
or "none"
Miscellaneous
"email"
Local part of Sympa email address
Format:
/"\S+"/
Default:
"sympa"
Context:
domain (robot.conf), site (sympa.conf)
Local part (the part preceding the "@" sign) of the address by which mail interface of
Sympa accepts mail commands.
If you change the default value, you must modify the mail aliases too.
"listmaster_email"
Local part of listmaster email address
Format:
/"\S+"/
Default:
"listmaster"
Context:
domain (robot.conf), site (sympa.conf)
Local part (the part preceding the "@" sign) of the address by which listmasters receive
messages.
If you change the default value, you must modify the mail aliases too.
"custom_robot_parameter"
Custom robot parameter
Format:
Multiple occurrences allowed.
/".+"/
Default:
None.
Context:
domain (robot.conf), site (sympa.conf)
Used to define a custom parameter for your server. Do not forget the semicolon between the
parameter name and the parameter value.
You will be able to access the custom parameter value in web templates by variable
"conf.custom_robot_parameter.<param_name>"
Example:
custom_robot_parameter param_name ; param_value
"prohibited_listnames"
Prevent people to use some names for their lists names
Format:
Any.
Default:
None.
Context:
site (sympa.conf)
Available versions:
6.2.63b.1 and later.
This parameter is a comma-separated list of names. You can use * as a wildcard character.
To use a regex for this, please use prohibited_listnames_regex setting.
Example:
prohibited_listnames www,root,*master
"prohibited_listnames_regex"
Prevent people to use some names for their lists names, based on a regex
Format:
Any.
Default:
None.
Context:
site (sympa.conf)
Available versions:
6.2.63b.1 and later.
This parameter is a regex. Please note that prohibited_listnames and
prohibited_listnames_regex will both be applied if set, they are not exclusive.
Example:
prohibited_listnames_regex www|root|.*master
"cache_list_config"
Use of binary cache of list configuration
Format:
"binary_file" - use binary file
"none" - do nothing
Default:
"none"
Context:
site (sympa.conf)
binary_file: Sympa processes will maintain a binary version of the list configuration,
"config.bin" file on local disk. If you manage a big amount of lists (1000+), it should
make the web interface startup faster.
You can recreate cache by running "sympa.pl --reload_list_config".
"db_list_cache"
Use database cache to search lists
Format:
"on" - enabled
"off" - disabled
Default:
"off"
Context:
site (sympa.conf)
Note that "list_table" database table should be filled at the first time by running:
# sympa.pl --sync_list_db
"purge_user_table_task"
Task for expiring inactive users
Format:
/"\w+"/
Default:
"monthly"
Context:
site (sympa.conf)
This task removes rows in the "user_table" table which have not corresponding entries in
the "subscriber_table" table.
"purge_logs_table_task"
Task for cleaning tables
Format:
/"\w+"/
Default:
"daily"
Context:
site (sympa.conf)
This task cleans old logs from "logs_table" table.
"logs_expiration_period"
Max age of logs in database
Format:
Number of months.
Default:
3 (months)
Context:
site (sympa.conf)
Number of months that elapse before a log is expired
"stats_expiration_period"
Max age of statistics information in database
Format:
Number of months.
Default:
3 (months)
Context:
site (sympa.conf)
Available versions:
6.2b.7 and later.
Number of months that elapse before statistics information are expired
"umask"
Umask
Format:
/"[0-7]+"/
Default:
027
Context:
site (sympa.conf)
Default mask for file creation (see umask(2)). Note that it will be interpreted as an
octal value.
"clean_delay_queuemod"
Max age of moderated messages
Format:
Number of days.
Default:
30 (days)
Context:
list (config), site (sympa.conf)
Number of days messages are kept in moderation spool (as specified by "queuemod"
parameter). Beyond this deadline, messages that have not been processed are deleted.
"custom_attribute"
(Paragraph) Custom user attributes
Multiple occurrences allowed
"custom_attribute.id"
internal identifier
Format:
/"\w+"/
Default:
None, mandatory.
Context:
list (config)
"custom_attribute.name"
label
Format:
/".+"/
Default:
None, mandatory.
Context:
list (config)
"custom_attribute.comment"
additional comment
Format:
/".+"/
Default:
None.
Context:
list (config)
"custom_attribute.type"
type
Format:
"string" - string
"text" - multi-line text
"integer" - number
"enum" - set of keywords
Default:
"string"
Context:
list (config)
"custom_attribute.enum_values"
possible attribute values (if enum is used)
Format:
/".+"/
Default:
None.
Context:
list (config)
"custom_attribute.optional"
is the attribute optional?
Format:
"required" - required
"optional" - optional
Default:
"optional"
Context:
list (config)
"custom_vars"
(Paragraph) custom parameters
Multiple occurrences allowed
"custom_vars.name"
var name
Format:
/"\S+"/
Default:
None, mandatory.
Context:
list (config)
"custom_vars.value"
var value
Format:
/".+"/
Default:
None, mandatory.
Context:
list (config)
"loop_prevention_regex"
Regular expression applied to prevent loops with robots
Format:
/"\S*"/
Default:
"mailer-daemon|sympa|listserv|majordomo|smartlist|mailman"
Context:
list (config), domain (robot.conf), site (sympa.conf)
If the sender address matches the regular expression, then the message is rejected.
"pictures_feature"
Pictures
Format:
"on" - enabled
"off" - disabled
Default:
"on"
Context:
list (config), domain (robot.conf), site (sympa.conf)
Enables or disables the pictures feature by default. If enabled, subscribers can upload
their picture (from the "Subscriber option" page) to use as an avatar.
Pictures are stored in a directory specified by the "static_content_path" parameter.
"remind_task"
Periodical subscription reminder task
Format:
/"\w+"/
Default:
None.
Context:
list (config), site (sympa.conf)
This parameter states which model is used to create a remind task. A remind task regularly
sends subscribers a message which reminds them of their list subscriptions.
"latest_instantiation"
(Paragraph) Latest family instantiation
Single occurrence
"latest_instantiation.email"
who ran the instantiation
Format:
/"listmaster|$email"/
Default:
None.
Context:
list (config)
"latest_instantiation.date_epoch"
date
Format:
The time in second from Unix epoch.
Default:
None, mandatory.
Context:
list (config)
"latest_instantiation.date"
Deprecated.
Context:
list (config)
Available versions:
up to 6.2.16.
"creation"
(Paragraph) Creation of the list
Single occurrence
"creation.email"
who created the list
Format:
/"listmaster|$email"/
Default:
None, mandatory.
Context:
list (config)
"creation.date_epoch"
date
Format:
The time in second from Unix epoch.
Default:
None, mandatory.
Context:
list (config)
"creation.date"
Deprecated.
Context:
list (config)
Available versions:
up to 6.2.16.
"update"
(Paragraph) Last update of config
Single occurrence
"update.email"
who updated the config
Format:
/"(listmaster|automatic|$email)"/
Default:
None.
Context:
list (config)
"update.date_epoch"
date
Format:
The time in second from Unix epoch.
Default:
None, mandatory.
Context:
list (config)
"update.date"
Deprecated.
Context:
list (config)
Available versions:
up to 6.2.16.
"status"
Status of the list
Format:
Status of list.
Default:
"open"
Context:
list (config)
"serial"
Serial number of the config
Format:
/"\d+"/
Default:
0
Context:
list (config)
Web interface parameters
"wwsympa_url"
URL prefix of web interface
Format:
Any.
Default:
None.
Context:
domain (robot.conf), site (sympa.conf)
This is used to construct URLs of web interface. The protocol (either https:// or http://)
is required.
Example:
wwsympa_url https://web.example.org/sympa
"wwsympa_url_local"
URL prefix of WWSympa behind proxy
Format:
Any.
Default:
None.
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
6.2.56 and later.
"static_content_url"
URL for static contents
Format:
Any.
Default:
"/static-sympa"
Context:
domain (robot.conf), site (sympa.conf)
HTTP server have to map it with "static_content_path" directory.
"static_content_path"
Directory for static contents
Format:
Any.
Default:
$STATICDIR
Context:
domain (robot.conf), site (sympa.conf)
"css_path"
Directory for static style sheets (CSS)
Format:
Any.
Default:
$CSSDIR
Context:
site (sympa.conf)
After an upgrade, static CSS files are upgraded with the newly installed "css.tt2"
template. Therefore, this is not a good place to store customized CSS files.
"css_url"
URL for style sheets (CSS)
Format:
Any.
Default:
"/static-sympa/css"
Context:
site (sympa.conf)
To use auto-generated static CSS, HTTP server have to map it with "css_path".
"pictures_path"
Directory for subscribers pictures
Format:
Any.
Default:
$PICTURESDIR
Context:
site (sympa.conf)
Available versions:
6.2.25b.2 and later.
"pictures_url"
URL for subscribers pictures
Format:
Any.
Default:
"/static-sympa/pictures"
Context:
site (sympa.conf)
Available versions:
6.2.25b.2 and later.
HTTP server have to map it with "pictures_path" directory.
"mhonarc"
Path to MHonArc mail-to-HTML converter
Format:
Any.
Default:
"/usr/bin/mhonarc"
Context:
domain (robot.conf), site (sympa.conf)
This is required for HTML mail archiving.
"log_facility"
System log facility for web interface
Format:
Any.
Default:
"LOCAL1"
Context:
site (sympa.conf)
System log facility for WWSympa, archived.pl and bounced.pl. Default is to use value of
"syslog" parameter.
Web interface parameters: Appearances
"logo_html_definition"
Custom logo
Format:
Any.
Default:
None.
Context:
domain (robot.conf), site (sympa.conf)
HTML fragment to insert a logo in the page of web interface.
Example:
logo_html_definition <a href="http://www.example.com"><img style="float: left; margin-top: 7px; margin-left: 37px;" src="http://www.example.com/logos/mylogo.jpg" alt="My Company" /></a>
"favicon_url"
Custom favicon
Format:
Any.
Default:
None.
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
6.2a.5 and later.
URL of favicon image
"color_0", ..., "color_15"
Colors for web interface
Format:
Any.
Default:
See description on web interface.
Context:
domain (robot.conf), site (sympa.conf)
Colors are used in style sheet (CSS). They may be changed using web interface by
listmasters.
"dark_color", "light_color", "text_color", "bg_color", "error_color", "selected_color",
"shaded_color"
Colors for web interface, obsoleted
Format:
Any.
Default:
See description on web interface.
Context:
domain (robot.conf), site (sympa.conf)
"default_home"
Type of main web page
Format:
Any.
Default:
"home"
Context:
domain (robot.conf), site (sympa.conf)
"lists" for the page of list of lists. "home" for home page.
"archive_default_index"
Default index organization of web archive
Format:
Any.
Default:
"thrd"
Context:
site (sympa.conf)
thrd: Threaded index.
mail: Chronological index.
"review_page_size"
Size of review page
Format:
Any.
Default:
25
Context:
domain (robot.conf), site (sympa.conf)
Default number of lines of the array displaying users in the review page
"viewlogs_page_size"
Size of viewlogs page
Format:
Any.
Default:
25
Context:
domain (robot.conf), site (sympa.conf)
Default number of lines of the array displaying the log entries in the logs page.
"main_menu_custom_button_1_title", ... "main_menu_custom_button_3_title",
"main_menu_custom_button_1_url", ... "main_menu_custom_button_3_url",
"main_menu_custom_button_1_target", ... "main_menu_custom_button_3_target"
Custom menus
Format:
Any.
Default:
None.
Context:
domain (robot.conf), site (sympa.conf)
You may modify the main menu content by editing the menu.tt2 file, but you can also edit
these parameters in order to add up to 3 buttons. Each button is defined by a title (the
text in the button), an URL and, optionally, a target.
Example:
main_menu_custom_button_1_title FAQ
main_menu_custom_button_1_url http://www.renater.fr/faq/universalistes/index
main_menu_custom_button_1_target Help
Password validation
Checks if the password the user submitted has sufficient strength. This feature requires
an external module: Data-Password.
"password_validation"
Password validation
Format:
Any.
Default:
None.
Context:
site (sympa.conf)
Available versions:
6.1.23 and later.
The password validation techniques to be used against user passwords that are added to
mailing lists. Options come from Data::Password
(http://search.cpan.org/~razinf/Data-Password-1.07/Password.pm#VARIABLES)
Example:
password_validation MINLEN=8,GROUPS=3,DICTIONARY=4,DICTIONARIES=/pentest/dictionaries
Authentication with LDAP
Authenticates users based on the directory on LDAP server. This feature requires an
external module: Net-LDAP. And also, if secure connection (LDAPS) is required: IO-Socket-
SSL.
"ldap_force_canonical_email"
Use canonical email address for LDAP authentication
Format:
Any.
Default:
1
Context:
domain (robot.conf), site (sympa.conf)
When using LDAP authentication, if the identifier provided by the user was a valid email,
if this parameter is set to false, then the provided email will be used to authenticate
the user. Otherwise, use of the first email returned by the LDAP server will be used.
SOAP HTTP interface
Provides some functions of Sympa through the SOAP HTTP interface. This feature requires an
external module: SOAP-Lite.
"soap_url"
URL of SympaSOAP
Format:
Any.
Default:
None.
Context:
domain (robot.conf), site (sympa.conf)
WSDL document of SympaSOAP refers to this URL in its service section.
Example:
soap_url http://web.example.org/sympasoap
"soap_url_local"
URL of SympaSOAP behind proxy
Format:
Any.
Default:
None.
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
6.2.19b.1 and later.
Web interface parameters: Miscellaneous
"cookie_domain"
HTTP cookies validity domain
Format:
Any.
Default:
"localhost"
Context:
domain (robot.conf), site (sympa.conf)
If beginning with a dot ("."), the cookie is available within the specified Internet
domain. Otherwise, for the specified host. The only reason for replacing the default value
would be where WWSympa's authentication process is shared with an application running on
another host.
Example:
cookie_domain .renater.fr
"cookie_expire"
HTTP cookies lifetime
Format:
Any.
Default:
0
Context:
site (sympa.conf)
This is the default value when not set explicitly by users. "0" means the cookie may be
retained during browser sessions.
"cookie_refresh"
Average interval to refresh HTTP session ID.
Format:
Any.
Default:
60
Context:
site (sympa.conf)
"purge_session_table_task"
Task for cleaning old sessions
Format:
/"\w+"/
Default:
"daily"
Context:
site (sympa.conf)
This task removes old entries in the "session_table" table.
"session_table_ttl"
Max age of sessions
Format:
Any.
Default:
"2d"
Context:
site (sympa.conf)
Session duration is controlled by "sympa_session" cookie validity attribute. However, by
security reason, this delay also need to be controlled by server side. This task removes
old entries in the "session_table" table.
Format of values is a string without spaces including "y" for years, "m" for months, "d"
for days, "h" for hours, "min" for minutes and "sec" for seconds.
"anonymous_session_table_ttl"
Max age of sessions for anonymous users
Format:
Any.
Default:
"1h"
Context:
site (sympa.conf)
"shared_feature"
Enable shared repository
Format:
"on" - enabled
"off" - disabled
Default:
"off"
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
6.2.41b.2 and later.
If set to "on", list owners can open shared repository.
"use_html_editor"
Use HTML editor
Format:
"off" - disabled
"on" - enabled
Default:
"off"
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
6.2a.0 and later.
If set to "on", users will be able to post messages in HTML using a javascript WYSIWYG
editor.
Example:
use_html_editor on
"html_editor_url"
URL of HTML editor
Format:
Any.
Default:
None.
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
6.2a.34 and later.
URL path to the javascript file making the WYSIWYG HTML editor available. Relative path
under <static_content_url> or absolute path.
Example is for TinyMCE 4 installed under <static_content_path>/js/tinymce/.
Example:
html_editor_url js/tinymce/tinymce.min.js
"html_editor_init"
HTML editor initialization
Format:
Any.
Default:
None.
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
6.2a.0 and later.
Javascript excerpt that enables and configures the WYSIWYG HTML editor.
Example:
html_editor_init tinymce.init({selector:"#body",language:lang.split(/[^a-zA-Z]+/).join("_")});
"max_wrong_password"
Count limit of wrong password submission
Format:
Any.
Default:
19
Context:
domain (robot.conf), site (sympa.conf)
If this limit is reached, the account is locked until the user renews their password. The
default value is chosen in order to block bots trying to log in using brute force
strategy. This value should never be reached by real users that will probably uses the
renew password service before they performs so many tries.
"password_case"
Password case
Format:
Any.
Default:
"insensitive"
Context:
site (sympa.conf)
"insensitive" or "sensitive".
If set to "insensitive", WWSympa's password check will be insensitive. This only concerns
passwords stored in the Sympa database, not the ones in LDAP.
Should not be changed! May invalid all user password.
"password_hash"
Password hashing algorithm
Format:
Any.
Default:
"md5"
Context:
site (sympa.conf)
Available versions:
6.2.25b.3 and later.
"md5" or "bcrypt".
If set to "md5", Sympa will use MD5 password hashes. If set to "bcrypt", bcrypt hashes
will be used instead. This only concerns passwords stored in the Sympa database, not the
ones in LDAP.
Should not be changed! May invalid all user passwords.
"password_hash_update"
Update password hashing algorithm when users log in
Format:
Any.
Default:
1
Context:
site (sympa.conf)
Available versions:
6.2.25b.3 and later.
On successful login, update the encrypted user password to use the algorithm specified by
"password_hash". This allows for a graceful transition to a new password hash algorithm. A
value of 0 disables updating of existing password hashes. New and reset passwords will
use the "password_hash" setting in all cases.
"bcrypt_cost"
Bcrypt hash cost
Format:
Any.
Default:
12
Context:
site (sympa.conf)
Available versions:
6.2.25b.3 and later.
When "password_hash" is set to "bcrypt", this sets the "cost" parameter of the bcrypt hash
function. The default of 12 is expected to require approximately 250ms to calculate the
password hash on a 3.2GHz CPU. This only concerns passwords stored in the Sympa database,
not the ones in LDAP.
Can be changed but any new cost setting will only apply to new passwords.
"one_time_ticket_lifetime"
Age of one time ticket
Format:
Any.
Default:
"2d"
Context:
site (sympa.conf)
Duration before the one time tickets are expired
"one_time_ticket_lockout"
Restrict access to one time ticket
Format:
Any.
Default:
"one_time"
Context:
domain (robot.conf), site (sympa.conf)
Is access to the one time ticket restricted, if any users previously accessed? (one_time |
remote_addr | open)
"purge_one_time_ticket_table_task"
Task for expiring old one time tickets
Format:
/"\w+"/
Default:
"daily"
Context:
site (sympa.conf)
"one_time_ticket_table_ttl"
Expiration period of one time ticket
Format:
Any.
Default:
"10d"
Context:
site (sympa.conf)
"pictures_max_size"
The maximum size of uploaded picture
Format:
Number of bytes.
Default:
102400 (bytes)
Context:
domain (robot.conf), site (sympa.conf)
"spam_protection"
Protect web interface against spam harvesters
Format:
"at" - replace @ characters
"javascript" - use JavaScript
"none" - do nothing
Default:
"javascript"
Context:
list (config), domain (robot.conf), site (sympa.conf)
There is a need to protect Sympa web sites against spambots which collect email addresses
from public web sites. Various methods are available in Sympa and you can choose to use
them with the spam_protection and web_archive_spam_protection parameters. Possible value
are:
javascript:
the address is hidden using a javascript. A user who enables javascript can see a nice
mailto address where others have nothing.
at:
the @ char is replaced by the string " AT ".
none:
no protection against spammer.
"reporting_spam_script_path"
Script to report spam
Format:
Any.
Default:
None.
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
6.2a.0 and later.
If set, when a list moderator report undetected spams for list moderation, this external
script is invoked and the message is injected into standard input of the script.
"domains_blocklist"
Prevent people to subscribe to a list with adresses using these domains
Format:
Any.
Default:
None.
Context:
site (sympa.conf)
Available versions:
6.2.61b.1 and later.
This parameter is a comma-separated list.
Example:
domains_blocklist example.org,spammer.com
"quiet_subscription"
Quiet subscriptions policy
Format:
"on" - enabled
"optional" - optional
"off" - disabled
Default:
"optional"
Context:
site (sympa.conf)
Available versions:
6.2.41b.1 and later.
Global policy for quiet subscriptions: "on" means that subscriptions will never send a
notice to the subscriber, "off" will enforce a notice sending, and "optional" (default)
allows the use of the list policy.
"show_report_abuse"
Add a "Report abuse" link in the side menu of the lists
Format:
"on" - enabled
"off" - disabled
Default:
"off"
Context:
site (sympa.conf)
Available versions:
6.2.37b.3 and later.
The link is a mailto link, you can change that by overriding web_tt2/report_abuse.tt2
"allow_account_deletion"
EXPERIMENTAL! Allow users to delete their account. If enabled, shows a "delete my account"
form in user's preferences page.
Format:
"on" - enabled
"off" - disabled
Default:
"off"
Context:
site (sympa.conf)
Available versions:
6.2.41b.1 and later.
Account deletion unsubscribes the users from his/her lists and removes him/her from lists
ownership. It is only available to users using internal authentication (i.e. no LDAP, no
SSO...). See https://github.com/sympa-community/sympa/issues/300 for details
Renamed parameters
These parameters were renamed. Though older names are still available, their use is no
longer recommended.
"arc_private_key_path"
See "arc_parameters.arc_private_key_path".
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
6.2.37b.1 to 6.2.56.
"arc_selector"
See "arc_parameters.arc_selector".
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
6.2.37b.1 to 6.2.56.
"arc_signer_domain"
See "arc_parameters.arc_signer_domain".
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
6.2.37b.1 to 6.2.56.
"archive_mail_access"
See "archive.mail_access".
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
up to 6.2.56.
"archive_web_access"
See "archive.web_access".
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
up to 6.2.56.
"bounce_halt_rate"
See "bounce.halt_rate".
Context:
site (sympa.conf)
Available versions:
up to 6.2.56.
"bounce_warn_rate"
See "bounce.warn_rate".
Context:
site (sympa.conf)
Available versions:
up to 6.2.56.
"custom-header"
See "custom_header".
Context:
Unknown.
"custom-subject"
See "custom_subject".
Context:
Unknown.
"d_edit"
See "shared_doc.d_edit".
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
up to 6.2.56.
"d_read"
See "shared_doc.d_read".
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
up to 6.2.56.
"default_archive_quota"
See "archive.quota".
Context:
site (sympa.conf)
Available versions:
up to 6.2.56.
"default_bounce_level1_rate"
See "bouncers_level1.rate".
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
up to 6.2.56.
"default_bounce_level2_rate"
See "bouncers_level2.rate".
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
up to 6.2.56.
"default_list_priority"
See "priority".
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
up to 6.2.56.
"default_max_list_members"
See "max_list_members".
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
up to 6.2.56.
"default_remind_task"
See "remind_task".
Context:
site (sympa.conf)
Available versions:
up to 6.2.56.
"default_shared_quota"
See "shared_doc.quota".
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
up to 6.2.56.
"default_sql_fetch_timeout"
See "sql_fetch_timeout".
Context:
site (sympa.conf)
Available versions:
6.2a.0 to 6.2.56.
"default_ttl"
See "ttl".
Context:
site (sympa.conf)
Available versions:
up to 6.2.56.
"dkim_private_key_path"
See "dkim_parameters.private_key_path".
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
up to 6.2.56.
"dkim_selector"
See "dkim_parameters.selector".
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
up to 6.2.56.
"dkim_signer_domain"
See "dkim_parameters.signer_domain".
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
up to 6.2.56.
"dmarc_protection_domain_regex"
See "dmarc_protection.domain_regex".
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
up to 6.2.56.
"dmarc_protection_mode"
See "dmarc_protection.mode".
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
up to 6.2.56.
"dmarc_protection_other_email"
See "dmarc_protection.other_email".
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
up to 6.2.56.
"dmarc_protection_phrase"
See "dmarc_protection.phrase".
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
up to 6.2.56.
"domains_blacklist"
See "domains_blocklist".
Context:
site (sympa.conf)
Available versions:
6.2.41b.1 to 6.2.60.
"email_gecos"
See "gecos".
Context:
site (sympa.conf)
Available versions:
6.2a.5 to 6.2a.33.
"forced_reply-to"
See "forced_reply_to".
Context:
Unknown.
"forced_replyto"
See "forced_reply_to".
Context:
Unknown.
"key_password"
See "key_passwd".
Context:
site (sympa.conf)
"max-size"
See "max_size".
Context:
Unknown.
"merge_feature"
See "personalization_feature".
Context:
Unknown.
Available versions:
6.0b.2 to 6.2.59b.1.
"reply-to"
See "reply_to".
Context:
Unknown.
"replyto"
See "reply_to".
Context:
Unknown.
"subscription"
See "subscribe".
Context:
Unknown.
"tracking_default_retention_period"
See "tracking.retention_period".
Context:
site (sympa.conf)
Available versions:
6.2a.3 to 6.2.56.
"tracking_delivery_status_notification"
See "tracking.delivery_status_notification".
Context:
site (sympa.conf)
Available versions:
6.2a.0 to 6.2.56.
"tracking_message_delivery_notification"
See "tracking_message_disposition_notification".
Context:
site (sympa.conf)
Available versions:
6.2a.0 to 6.2a.40.
"tracking_message_disposition_notification"
See "tracking.message_disposition_notification".
Context:
site (sympa.conf)
Available versions:
6.2a.41 to 6.2.56.
"unsubscription"
See "unsubscribe".
Context:
Unknown.
"use_blacklist"
See "use_blocklist".
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
5.3a.4 to 6.2.60.
Deprecated parameters
These parameters were deprecated. They may not be used anymore.
"account"
Deprecated.
Context:
list (config)
"archived_pidfile"
Deprecated.
Context:
site (sympa.conf)
Available versions:
up to 6.1.17.
"automatic_list_prefix"
Deprecated.
Context:
site (sympa.conf)
"bounced_pidfile"
Deprecated.
Context:
site (sympa.conf)
Available versions:
up to 6.1.17.
"clean_delay_queueother"
Deprecated.
Context:
site (sympa.conf)
Available versions:
5.4a.9 to 5.4.7.
"cookie"
Deprecated.
Context:
list (config), site (sympa.conf)
Available versions:
up to 6.2.60.
"default_distribution_ttl"
Deprecated.
Context:
site (sympa.conf)
"distribution_mode"
Deprecated.
Context:
site (sympa.conf)
Available versions:
5.0a.1 to 6.2a.40.
"edit_list"
Deprecated.
Context:
site (sympa.conf)
"editor"
Deprecated.
Context:
list (config)
Available versions:
up to 6.2.32.
"expire_task"
Deprecated.
Context:
list (config)
"filesystem_encoding"
Deprecated.
Context:
site (sympa.conf)
Available versions:
5.3a.7 to 6.2.52.
"forced_reply_to"
Deprecated.
Context:
list (config)
"host"
Deprecated.
Context:
list (config), domain (robot.conf), site (sympa.conf)
"html_editor_file"
Deprecated.
Context:
site (sympa.conf)
Available versions:
6.0a.0 to 6.2a.33.
"htmlarea_url"
Deprecated.
Context:
site (sympa.conf)
Available versions:
up to 6.2.35b.1.
"http_host"
Deprecated.
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
up to 6.2.54.
"include_list"
Deprecated.
Context:
list (config)
Available versions:
2.2.6 to 6.2.15.
"ldap_export_connection_timeout"
Deprecated.
Context:
site (sympa.conf)
Available versions:
3.3b.3 to 4.1?.
"ldap_export_dnmanager"
Deprecated.
Context:
site (sympa.conf)
Available versions:
3.3b.3 to 4.1?.
"ldap_export_host"
Deprecated.
Context:
site (sympa.conf)
Available versions:
3.3b.3 to 4.1?.
"ldap_export_name"
Deprecated.
Context:
site (sympa.conf)
Available versions:
3.3b.3 to 4.1?.
"ldap_export_password"
Deprecated.
Context:
site (sympa.conf)
Available versions:
3.3b.3 to 4.1?.
"ldap_export_suffix"
Deprecated.
Context:
site (sympa.conf)
Available versions:
3.3b.3 to 4.1?.
"localedir"
Deprecated.
Context:
site (sympa.conf)
Available versions:
4.2b.2 to 6.2a.32.
"lock_method"
Deprecated.
Context:
site (sympa.conf)
Available versions:
5.3b.3 to 6.2a.33.
"log_condition"
Deprecated.
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
6.2a.29 to 6.2.41b.1.
"log_module"
Deprecated.
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
6.2a.29 to 6.2.41b.1.
"msgcat"
Deprecated.
Context:
site (sympa.conf)
Available versions:
up to 4.2b.1.
"openssl"
Deprecated.
Context:
site (sympa.conf)
Available versions:
up to 6.2a.40.
"owner"
Deprecated.
Context:
list (config)
Available versions:
up to 6.2.32.
"pidfile"
Deprecated.
Context:
site (sympa.conf)
Available versions:
up to 6.1.17.
"pidfile_bulk"
Deprecated.
Context:
site (sympa.conf)
Available versions:
up to 6.1.17.
"pidfile_creation"
Deprecated.
Context:
site (sympa.conf)
Available versions:
up to 6.1.17.
"pidfile_distribute"
Deprecated.
Context:
site (sympa.conf)
Available versions:
up to 6.1.17.
"queuedistribute"
Deprecated.
Context:
site (sympa.conf)
Available versions:
5.0a.1 to 6.2a.40.
"queueexpire"
Deprecated.
Context:
site (sympa.conf)
Available versions:
up to 5.1.2.
"reply_to"
Deprecated.
Context:
list (config)
"sort"
Deprecated.
Context:
site (sympa.conf)
Available versions:
1.4.0 and later.
"task_manager_pidfile"
Deprecated.
Context:
site (sympa.conf)
Available versions:
up to 6.1.17.
"tracking" (domain and site)
See "tracking.tracking".
Context:
domain (robot.conf), site (sympa.conf)
Available versions:
up to 6.2.56.
"tri"
Deprecated.
Context:
site (sympa.conf)
Available versions:
up to 1.3.4-1.
"trusted_ca_options"
Deprecated.
Context:
site (sympa.conf)
Available versions:
up to 3.3.5.
"use_fast_cgi"
Deprecated.
Context:
site (sympa.conf)
Available versions:
up to 6.2.22.
"user_data_source"
Deprecated.
Context:
list (config)
"web_archive"
Deprecated.
Context:
list (config), domain (robot.conf), site (sympa.conf)
Available versions:
up to 6.2a.43.
"web_recode_to"
Deprecated.
Context:
site (sympa.conf)
Available versions:
up to 5.2.
FILES
/etc/sympa/sympa/sympa.conf
Sympa main configuration file.
$SYSCONFDIR/<mail domain name>/robot.conf
Configuration specific to each mail domain.
$EXPLDIR/<list name>/config or $EXPLDIR/<mail domain name>/<list name>/config
List main configuration file.
SEE ALSO
Sympa Administration Manual. <https://sympa-community.github.io/manual/>.
auth.conf(5), charset.conf(5), crawlers_detection.conf(5), edit_list.conf(5),
ldap_alias_manager.conf(5), nrcpt_by_domain.conf(5), sympa_scenario(5), topics.conf(5).