Provided by: xscreensaver-gl_5.45+dfsg1-2ubuntu1_amd64 
NAME
hypertorus - Draws a hypertorus that rotates in 4d
SYNOPSIS
hypertorus [-display host:display.screen] [-install] [-visual visual] [-window] [-root] [-delay usecs]
[-fps] [-wireframe] [-surface] [-transparent] [-solid] [-bands] [-spirals-{1,2,4,8,16}] [-onesided]
[-twosided] [-colorwheel] [-change-colors] [-perspective-3d] [-orthographic-3d] [-perspective-4d]
[-orthographic-4d] [-speed-wx float] [-speed-wy float] [-speed-wz float] [-speed-xy float] [-speed-xz
float] [-speed-yz float]
DESCRIPTION
The hypertorus program shows the Clifford torus as it rotates in 4d. The Clifford torus is a torus lies
on the "surface" of the hypersphere in 4d. The program projects the 4d torus to 3d using either a
perspective or an orthographic projection. Of the two alternatives, the perspective projection looks
much more appealing. In orthographic projections the torus degenerates into a doubly covered cylinder
for some angles. The projected 3d torus can then be projected to the screen either perspectively or
orthographically.
There are three display modes for the torus: mesh (wireframe), solid, or transparent. Furthermore, the
appearance of the torus can be as a solid object or as a set of see-through bands or see-through spirals.
Finally, the colors with with the torus is drawn can be set to one-sided, two-sided, or to a color wheel.
The colors can be static or changing dynamically. In one-sided color mode, the torus is drawn with the
same color on the inside and the outside. In two-sided color mode, the torus is drawn with red on the
outside and green on the inside if static colors are used. If changing colors are used, dynamically
varying complementary colors are used for the two sides. This mode enables you to see that the 3d
projection of the torus turns inside-out as it rotates in 4d. The color wheel mode draws the torus with
a fully saturated color wheel. If changing colors are used, the colors of the color wheel are varying
dynamically. The color wheel mode gives a very nice effect when combined with the see-through bands or
see-through spirals mode.
Finally, the rotation speed for each of the six planes around which the torus rotates can be chosen.
This program is inspired by Thomas Banchoff's book "Beyond the Third Dimension: Geometry, Computer
Graphics, and Higher Dimensions", Scientific American Library, 1990.
OPTIONS
hypertorus accepts the following options:
-window Draw on a newly-created window. This is the default.
-root Draw on the root window.
-install
Install a private colormap for the window.
-visual visual
Specify which visual to use. Legal values are the name of a visual class, or the id number
(decimal or hex) of a specific visual.
-delay microseconds
How much of a delay should be introduced between steps of the animation. Default 25000, or
1/40th second.
The following three options are mutually exclusive. They determine how the torus is displayed.
-wireframe
Display the torus as a wireframe mesh.
-surface
Display the torus as a solid surface (default).
-transparent
Display the torus as a transparent surface.
The following seven options are mutually exclusive. They determine the appearance of the torus.
-solid Display the torus as a solid object.
-bands Display the torus as see-through bands (default).
-spirals-1, -spirals-2, -spirals-4, -spirals-8, -spirals-16
Display the torus as see-through spirals with the indicated number of spirals.
The following three options are mutually exclusive. They determine how to color the torus.
-onesided
Display the torus with a single color.
-twosided
Display the torus with two colors: one color on the outside and the complementary on the inside.
For static colors, the colors are red and green.
-colorwheel
Display the torus with a fully saturated color wheel (default). If the torus is displayed as
see-through bands, each band will be displayed with a different color. Likewise, if the torus is
displayed as see-through spirals, each spiral will receive a different color.
The following options determine whether the colors with which the torus is displayed are static or are
changing dynamically.
-change-colors
Change the colors with which the torus is displayed dynamically.
-no-change-colors
Use static colors to display the torus (default).
The following two options are mutually exclusive. They determine how the torus is projected from 3d to
2d (i.e., to the screen).
-perspective-3d
Project the torus from 3d to 2d using a perspective projection (default).
-orthographic-3d
Project the torus from 3d to 2d using an orthographic projection.
The following two options are mutually exclusive. They determine how the torus is projected from 4d to
3d.
-perspective-4d
Project the torus from 4d to 3d using a perspective projection (default).
-orthographic-4d
Project the torus from 4d to 3d using an orthographic projection.
The following six options determine the rotation speed of the torus around the six possible hyperplanes.
The rotation speed is measured in degrees per frame. The speeds should be set to relatively small
values, e.g., less than 4 in magnitude.
-speed-wx float
Rotation speed around the wx plane (default: 1.1).
-speed-wy float
Rotation speed around the wy plane (default: 1.3).
-speed-wz float
Rotation speed around the wz plane (default: 1.5).
-speed-xy float
Rotation speed around the xy plane (default: 1.7).
-speed-xz float
Rotation speed around the xz plane (default: 1.9).
-speed-yz float
Rotation speed around the yz plane (default: 2.1).
-fps Display the current frame rate, CPU load, and polygon count.
INTERACTION
If you run this program in standalone mode you can rotate the hypertorus by dragging the mouse while
pressing the left mouse button. This rotates the hypertorus in 3d, i.e., around the wx, wy, and wz
planes. If you press the shift key while dragging the mouse with the left button pressed the hypertorus
is rotated in 4d, i.e., around the xy, xz, and yz planes. To examine the hypertorus at your leisure, it
is best to set all speeds to 0. Otherwise, the hypertorus will rotate while the left mouse button is not
pressed.
ENVIRONMENT
DISPLAY to get the default host and display number.
XENVIRONMENT
to get the name of a resource file that overrides the global resources stored in the
RESOURCE_MANAGER property.
SEE ALSO
X(1), xscreensaver(1)
COPYRIGHT
Copyright © 2003-2020 by Carsten Steger. Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted without fee, provided that the above
copyright notice appear in all copies and that both that copyright notice and this permission notice
appear in supporting documentation. No representations are made about the suitability of this software
for any purpose. It is provided "as is" without express or implied warranty.
AUTHOR
Carsten Steger <carsten@mirsanmir.org>, 11-jan-2020.
X Version 11 5.45 (08-Dec-2020) hypertorus(6x)