Provided by: systemd-repart_249.11-0ubuntu3.12_amd64 bug

NAME

       systemd-repart, systemd-repart.service - Automatically grow and add partitions

SYNOPSIS

       systemd-repart [OPTIONS...] [[BLOCKDEVICE]...]

       systemd-repart.service

DESCRIPTION

       systemd-repart grows and adds partitions to a partition table, based on the configuration
       files described in repart.d(5).

       If invoked with no arguments, it operates on the block device backing the root file system
       partition of the running OS, thus growing and adding partitions of the booted OS image
       itself. If --image= is used it will operate on the specified image file. When called in
       the "initrd" it operates on the block device backing /sysroot/ instead, i.e. on the block
       device the system will soon transition into. The systemd-repart.service service is
       generally run at boot in the initial RAM disk, in order to augment the partition table of
       the OS before its partitions are mounted.  systemd-repart (mostly) operates in a purely
       incremental mode: it only grows existing and adds new partitions; it does not shrink,
       delete or move existing partitions. The service is intended to be run on every boot, but
       when it detects that the partition table already matches the installed repart.d/*.conf
       configuration files, it executes no operation.

       systemd-repart is intended to be used when deploying OS images, to automatically adjust
       them to the system they are running on, during first boot. This way the deployed image can
       be minimal in size and may be augmented automatically at boot when needed, taking
       possession of disk space available but not yet used. Specifically the following use cases
       are among those covered:

       •   The root partition may be grown to cover the whole available disk space.

       •   A /home/, swap or /srv/ partition can be added.

       •   A second (or third, ...) root partition may be added, to cover A/B style setups where
           a second version of the root file system is alternatingly used for implementing update
           schemes. The deployed image would carry only a single partition ("A") but on first
           boot a second partition ("B") for this purpose is automatically created.

       The algorithm executed by systemd-repart is roughly as follows:

        1. The repart.d/*.conf configuration files are loaded and parsed, and ordered by filename
           (without the directory prefix).

        2. The partition table already existing on the block device is loaded and parsed.

        3. The existing partitions in the partition table are matched up with the repart.d/*.conf
           files by GPT partition type UUID. The first existing partition of a specific type is
           assigned the first configuration file declaring the same type. The second existing
           partition of a specific type is then assigned the second configuration file declaring
           the same type, and so on. After this iterative assigning is complete any left-over
           existing partitions that have no matching configuration file are considered "foreign"
           and left as they are. And any configuration files for which no partition currently
           exists are understood as a request to create such a partition.

        4. Taking the size constraints and weights declared in the configuration files into
           account, all partitions that shall be created are now allocated to the disk, taking up
           all free space, always respecting the size and padding requests. Similar, existing
           partitions that are determined to grow are grown. New partitions are always appended
           to the end of the existing partition table, taking the first partition table slot
           whose index is greater than the indexes of all existing partitions. Partition table
           slots are never reordered and thus partition numbers are ensured to remain stable.
           Note that this allocation happens in RAM only, the partition table on disk is not
           updated yet.

        5. All existing partitions for which configuration files exist and which currently have
           no GPT partition label set will be assigned a label, either explicitly configured in
           the configuration or (if that's missing) derived automatically from the partition
           type. The same is done for all partitions that are newly created. These assignments
           are done in RAM only, too, the disk is not updated yet.

        6. Similarly, all existing partitions for which configuration files exist and which
           currently have an all-zero identifying UUID will be assigned a new UUID. This UUID is
           cryptographically hashed from a common seed value together with the partition type
           UUID (and a counter in case multiple partitions of the same type are defined), see
           below. The same is done for all partitions that are created anew. These assignments
           are done in RAM only, too, the disk is not updated yet.

        7. Similarly, if the disk's volume UUID is all zeroes it is also initialized, also
           cryptographically hashed from the same common seed value. Also, in RAM only, too.

        8. The disk space assigned to new partitions (i.e. what was previously considered free
           space but is no longer) is now erased. Specifically, all file system signatures are
           removed, and if the device supports it the BLKDISCARD I/O control command is issued to
           inform the hardware that the space is empty now. In addition any "padding" between
           partitions and at the end of the device is similarly erased.

        9. The new partition table is finally written to disk. The kernel is asked to reread the
           partition table.

       As exception to the normally strictly incremental operation, when called in a special
       "factory reset" mode, systemd-repart may also be used to erase existing partitions to
       reset an installation back to vendor defaults. This mode of operation is used when either
       the --factory-reset=yes switch is passed on the tool's command line, or the
       systemd.factory_reset=yes option specified on the kernel command line, or the FactoryReset
       EFI variable (vendor UUID 8cf2644b-4b0b-428f-9387-6d876050dc67) is set to "yes". It alters
       the algorithm above slightly: between the 3rd and the 4th step above any partition marked
       explicitly via the FactoryReset= boolean is deleted, and the algorithm restarted, thus
       immediately re-creating these partitions anew empty.

       Note that systemd-repart only changes partition tables, it does not create or resize any
       file systems within these partitions. A separate mechanism should be used for that, for
       example systemd-growfs(8) and systemd-makefs.

       The UUIDs identifying the new partitions created (or assigned to existing partitions that
       have no UUID yet), as well as the disk as a whole are hashed cryptographically from a
       common seed value. This seed value is usually the machine-id(5) of the system, so that the
       machine ID reproducibly determines the UUIDs assigned to all partitions. If the machine ID
       cannot be read (or the user passes --seed=random, see below) the seed is generated
       randomly instead, so that the partition UUIDs are also effectively random. The seed value
       may also be set explicitly, formatted as UUID via the --seed= option. By hashing these
       UUIDs from a common seed images prepared with this tool become reproducible and the result
       of the algorithm above deterministic.

       The positional argument should specify the block device to operate on. Instead of a block
       device node path a regular file may be specified too, in which case the command operates
       on it like it would if a loopback block device node was specified with the file attached.
       If --empty=create is specified the specified path is created as regular file, which is
       useful for generating disk images from scratch.

OPTIONS

       The following options are understood:

       --dry-run=
           Takes a boolean. If this switch is not specified --dry-run=yes is the implied default.
           Controls whether systemd-repart executes the requested re-partition operations or
           whether it should only show what it would do. Unless --dry-run=no is specified
           systemd-repart will not actually touch the device's partition table.

       --empty=
           Takes one of "refuse", "allow", "require", "force" or "create". Controls how to
           operate on block devices that are entirely empty, i.e. carry no partition table/disk
           label yet. If this switch is not specified the implied default is "refuse".

           If "refuse" systemd-repart requires that the block device it shall operate on already
           carries a partition table and refuses operation if none is found. If "allow" the
           command will extend an existing partition table or create a new one if none exists. If
           "require" the command will create a new partition table if none exists so far, and
           refuse operation if one already exists. If "force" it will create a fresh partition
           table unconditionally, erasing the disk fully in effect. If "force" no existing
           partitions will be taken into account or survive the operation. Hence: use with care,
           this is a great way to lose all your data. If "create" a new loopback file is create
           under the path passed via the device node parameter, of the size indicated with
           --size=, see below.

       --discard=
           Takes a boolean. If this switch is not specified --discard=yes is the implied default.
           Controls whether to issue the BLKDISCARD I/O control command on the space taken up by
           any added partitions or on the space in between them. Usually, it's a good idea to
           issue this request since it tells the underlying hardware that the covered blocks
           shall be considered empty, improving performance. If operating on a regular file
           instead of a block device node, a sparse file is generated.

       --size=
           Takes a size in bytes, using the usual K, M, G, T suffixes, or the special value
           "auto". If used the specified device node path must refer to a regular file, which is
           then grown to the specified size if smaller, before any change is made to the
           partition table. If specified as "auto" the minimal size for the disk image is
           automatically determined (i.e. the minimal sizes of all partitions are summed up,
           taking space for additional metadata into account). This switch is not supported if
           the specified node is a block device. This switch has no effect if the file is already
           as large as the specified size or larger. The specified size is implicitly rounded up
           to multiples of 4096. When used with --empty=create this specifies the initial size of
           the loopback file to create.

           The --size=auto option takes the sizes of pre-existing partitions into account.
           However, it does not accommodate for partition tables that are not tightly packed: the
           configured partitions might still not fit into the backing device if empty space
           exists between pre-existing partitions (or before the first partition) that cannot be
           fully filled by partitions to grow or create.

           Also note that the automatic size determination does not take files or directories
           specified with CopyFiles= into account: operation might fail if the specified files or
           directories require more disk space then the configured per-partition minimal size
           limit.

       --factory-reset=
           Takes boolean. If this switch is not specified --factory=reset=no is the implied
           default. Controls whether to operate in "factory reset" mode, see above. If set to
           true this will remove all existing partitions marked with FactoryReset= set to yes
           early while executing the re-partitioning algorithm. Use with care, this is a great
           way to lose all your data. Note that partition files need to explicitly turn
           FactoryReset= on, as the option defaults to off. If no partitions are marked for
           factory reset this switch has no effect. Note that there are two other methods to
           request factory reset operation: via the kernel command line and via an EFI variable,
           see above.

       --can-factory-reset
           If this switch is specified the disk is not re-partitioned. Instead it is determined
           if any existing partitions are marked with FactoryReset=. If there are the tool will
           exit with exit status zero, otherwise non-zero. This switch may be used to quickly
           determine whether the running system supports a factory reset mechanism built on
           systemd-repart.

       --root=
           Takes a path to a directory to use as root file system when searching for
           repart.d/*.conf files, for the machine ID file to use as seed and for the CopyFiles=
           and CopyBlocks= source files and directories. By default when invoked on the regular
           system this defaults to the host's root file system /. If invoked from the initial RAM
           disk this defaults to /sysroot/, so that the tool operates on the configuration and
           machine ID stored in the root file system later transitioned into itself.

       --image=
           Takes a path to a disk image file or device to mount and use in a similar fashion to
           --root=, see above.

       --seed=
           Takes a UUID as argument or the special value random. If a UUID is specified the UUIDs
           to assign to partitions and the partition table itself are derived via cryptographic
           hashing from it. If not specified it is attempted to read the machine ID from the host
           (or more precisely, the root directory configured via --root=) and use it as seed
           instead, falling back to a randomized seed otherwise. Use --seed=random to force a
           randomized seed. Explicitly specifying the seed may be used to generated strictly
           reproducible partition tables.

       --pretty=
           Takes a boolean argument. If this switch is not specified, it defaults to on when
           called from an interactive terminal and off otherwise. Controls whether to show a user
           friendly table and graphic illustrating the changes applied.

       --definitions=
           Takes a file system path. If specified the *.conf files are read from the specified
           directory instead of searching in /usr/lib/repart.d/*.conf, /etc/repart.d/*.conf,
           /run/repart.d/*.conf.

       --key-file=
           Takes a file system path. Configures the encryption key to use when setting up LUKS2
           volumes configured with the Encrypt=key-file setting in partition files. Should refer
           to a regular file containing the key, or an AF_UNIX stream socket in the file system.
           In the latter case a connection is made to it and the key read from it. If this switch
           is not specified the empty key (i.e. zero length key) is used. This behaviour is
           useful for setting up encrypted partitions during early first boot that receive their
           user-supplied password only in a later setup step.

       --tpm2-device=, --tpm2-pcrs=
           Configures the TPM2 device and list of PCRs to use for LUKS2 volumes configured with
           the Encrypt=tpm2 option. These options take the same parameters as the identically
           named options to systemd-cryptenroll(1) and have the same effect on partitions where
           TPM2 enrollment is requested.

       -h, --help
           Print a short help text and exit.

       --version
           Print a short version string and exit.

       --no-pager
           Do not pipe output into a pager.

       --no-legend
           Do not print the legend, i.e. column headers and the footer with hints.

       --json=MODE
           Shows output formatted as JSON. Expects one of "short" (for the shortest possible
           output without any redundant whitespace or line breaks), "pretty" (for a pretty
           version of the same, with indentation and line breaks) or "off" (to turn off JSON
           output, the default).

EXIT STATUS

       On success, 0 is returned, a non-zero failure code otherwise.

SEE ALSO

       systemd(1), repart.d(5), machine-id(5), systemd-cryptenroll(1)