Ubuntu Manpage: RhumbSolve -- perform rhumb line calculations

Provided by: geographiclib-tools_1.52-1_amd64

NAME

       RhumbSolve -- perform rhumb line calculations

SYNOPSIS

       RhumbSolve [ -i | -L lat1 lon1 azi12 ] [ -e a f ] [ -d | -: ] [ -w ] [ -p prec ] [ -s ] [
       --comment-delimiter commentdelim ] [ --version | -h | --help ] [ --input-file infile | --input-string
       instring ] [ --line-separator linesep ] [ --output-file outfile ]

DESCRIPTION

The path with constant heading between two points on the ellipsoid at (lat1, lon1) and (lat2, lon2) is
called the rhumb line or loxodrome. Its length is s12 and the rhumb line has a forward azimuth azi12
along its length. Also computed is S12 is the area between the rhumb line from point 1 to point 2 and
the equator; i.e., it is the area, measured counter-clockwise, of the geodesic quadrilateral with corners
(lat1,lon1), (0,lon1), (0,lon2), and (lat2,lon2). A point at a pole is treated as a point a tiny
distance away from the pole on the given line of longitude. The longitude becomes indeterminate when a
rhumb line passes through a pole, and RhumbSolve reports NaNs for the longitude and the area in this
case.

NOTE: the rhumb line is not the shortest path between two points; that is the geodesic and it is
calculated by GeodSolve(1).

RhumbSolve operates in one of three modes:

1. By default, RhumbSolve accepts lines on the standard input containing lat1 lon1 azi12 s12 and prints
lat2 lon2 S12 on standard output. This is the direct calculation.

2. With the -i command line argument, RhumbSolve performs the inverse calculation. It reads lines
containing lat1 lon1 lat2 lon2 and prints the values of azi12 s12 S12 for the corresponding shortest
rhumb lines. If the end points are on opposite meridians, there are two shortest rhumb lines and the
east-going one is chosen.

3. Command line arguments -L lat1 lon1 azi12 specify a rhumb line. RhumbSolve then accepts a sequence
of s12 values (one per line) on standard input and prints lat2 lon2 S12 for each. This generates a
sequence of points on a rhumb line.

OPTIONS

-i perform an inverse calculation (see 2 above).

-L lat1 lon1 azi12
line mode (see 3 above); generate a sequence of points along the rhumb line specified by lat1 lon1
azi12. The -w flag can be used to swap the default order of the 2 geographic coordinates, provided
that it appears before -L. (-l is an alternative, deprecated, spelling of this flag.)

-e a f
specify the ellipsoid via the equatorial radius, a and the flattening, f. Setting f = 0 results in a
sphere. Specify f < 0 for a prolate ellipsoid. A simple fraction, e.g., 1/297, is allowed for f.
By default, the WGS84 ellipsoid is used, a = 6378137 m, f = 1/298.257223563.

-d output angles as degrees, minutes, seconds instead of decimal degrees.

-: like -d, except use : as a separator instead of the d, ', and " delimiters.

-w on input and output, longitude precedes latitude (except that on input this can be overridden by a
hemisphere designator, N, S, E, W).

-p prec
set the output precision to prec (default 3); prec is the precision relative to 1 m. See
"PRECISION".

-s By default, the rhumb line calculations are carried out exactly in terms of elliptic integrals. This
includes the use of the addition theorem for elliptic integrals to compute the divided difference of
the isometric and rectifying latitudes. If -s is supplied this divided difference is computed using
Krueger series for the transverse Mercator projection which is only accurate for |f| < 0.01. See
"ACCURACY".

--comment-delimiter commentdelim
set the comment delimiter to commentdelim (e.g., "#" or "//"). If set, the input lines will be
scanned for this delimiter and, if found, the delimiter and the rest of the line will be removed
prior to processing and subsequently appended to the output line (separated by a space).

--version
print version and exit.

-h print usage and exit.

--help
print full documentation and exit.

--input-file infile
read input from the file infile instead of from standard input; a file name of "-" stands for
standard input.

--input-string instring
read input from the string instring instead of from standard input. All occurrences of the line
separator character (default is a semicolon) in instring are converted to newlines before the reading
begins.

--line-separator linesep
set the line separator character to linesep. By default this is a semicolon.

--output-file outfile
write output to the file outfile instead of to standard output; a file name of "-" stands for
standard output.

INPUT

       RhumbSolve  measures all angles in degrees, all lengths (s12) in meters, and all areas (S12) in meters^2.
       On input angles (latitude, longitude, azimuth, arc length) can be as decimal degrees or degrees, minutes,
       seconds.  For example, "40d30", "40d30'", "40:30", "40.5d", and 40.5 are  all  equivalent.   By  default,
       latitude  precedes  longitude  for  each  point  (the -w flag switches this convention); however on input
       either may be given first by appending (or prepending) N or  S  to  the  latitude  and  E  or  W  to  the
       longitude.  Azimuths are measured clockwise from north; however this may be overridden with E or W.

       For details on the allowed formats for angles, see the "GEOGRAPHIC COORDINATES" section of GeoConvert(1).

PRECISION

       prec  gives  precision  of the output with prec = 0 giving 1 m precision, prec = 3 giving 1 mm precision,
       etc.  prec is the number of digits after the decimal point for lengths.  For decimal degrees, the  number
       of  digits  after the decimal point is prec + 5.  For DMS (degree, minute, seconds) output, the number of
       digits after the decimal point in the seconds component is prec + 1.  The minimum value of prec is 0  and
       the maximum is 10.

ERRORS

       An  illegal  line  of  input  will  print an error message to standard output beginning with "ERROR:" and
       causes RhumbSolve to return an exit code of 1.  However, an error does not cause RhumbSolve to terminate;
       following lines will be converted.

ACCURACY

       The algorithm used by RhumbSolve uses exact formulas for  converting  between  the  latitude,  rectifying
       latitude  (mu),  and  isometric  latitude  (psi).   These  formulas  are  accurate  for  any value of the
       flattening.  The computation of rhumb lines involves the ratio (psi1 - psi2) / (mu1 - mu2)  and  this  is
       subject  to  large  round-off  errors  if lat1 is close to lat2.  So this ratio is computed using divided
       differences using one of two methods: by default, this uses the addition theorem for  elliptic  integrals
       (accurate  for all values of f); however, with the -s options, it is computed using the series expansions
       used by  TransverseMercatorProj(1)  for  the  conversions  between  rectifying  and  conformal  latitudes
       (accurate  for  |f|  <  0.01).   For  the  WGS84 ellipsoid, the error is about 10 nanometers using either
       method.

EXAMPLES

       Route from JFK Airport to Singapore Changi Airport:

          echo 40:38:23N 073:46:44W 01:21:33N 103:59:22E |
          RhumbSolve -i -: -p 0

          103:34:58.2 18523563

       N.B. This is not the route typically taken by aircraft because it's considerably longer than the geodesic
       given by GeodSolve(1).

       Waypoints on the route at intervals of 2000km:

          for ((i = 0; i <= 20; i += 2)); do echo ${i}000000;done |
          RhumbSolve -L 40:38:23N 073:46:44W 103:34:58.2 -: -p 0

          40:38:23.0N 073:46:44.0W 0
          36:24:30.3N 051:28:26.4W 9817078307821
          32:10:26.8N 030:20:57.3W 18224745682005
          27:56:13.2N 010:10:54.2W 25358020327741
          23:41:50.1N 009:12:45.5E 31321269267102
          19:27:18.7N 027:59:22.1E 36195163180159
          15:12:40.2N 046:17:01.1E 40041499143669
          10:57:55.9N 064:12:52.8E 42906570007050
          06:43:07.3N 081:53:28.8E 44823504180200
          02:28:16.2N 099:24:54.5E 45813843358737
          01:46:36.0S 116:52:59.7E 45888525219677

AUTHOR

       RhumbSolve was written by Charles Karney.

HISTORY

       RhumbSolve was added to GeographicLib, <https://geographiclib.sourceforge.io>, in version 1.37.

GeographicLib 1.52                                 2021-06-21                                      RHUMBSOLVE(1)