Provided by: brltty_6.4-4ubuntu3_amd64 
NAME
brltty - refreshable braille display driver for Linux/Unix
SYNOPSIS
brltty [option ...]
DESCRIPTION
brltty is a background process (daemon) which provides access to the console screen (when in text mode)
for a blind person using a refreshable braille display. It drives the braille display, and provides
complete screen review functionality. Some speech capability has also been incorporated.
OPTIONS
Options can be passed to brltty in a number of ways. From most to least influential, these are:
1. Command Line Options
2. Boot Parameters
3. Environment Variables (if the -E (--environment-variables) option is in effect)
4. The Configuration File
5. Built-in Defaults
Command Line Options
The options are processed sequentially from left to right. If an option is specified more than once, or
in case of a conflict, the rightmost specification takes precedence.
The following options are supported:
-a table (--attributes-table=)
The path to the attributes table. Relative paths are anchored at /etc/brltty/Attributes. The
.atb extension is optional. The built-in default is left_right.atb.
-b driver,...|auto (--braille-driver=)
The driver for the braille display (see Driver Specification). The built-in default is auto.
-c table (--contraction-table=)
The path to the contraction table. Relative paths are anchored at /etc/brltty/Contraction. The
.ctb extension is optional.
-d device,... (--braille-device=)
The device to which the braille display is connected. The built-in default is usb:,bluetooth:.
The general form of a braille device specification is qualifier:data. For backward compatibility
with earlier releases, if the qualifier is omitted then serial: is assumed. The following device
types are supported:
Bluetooth
For a bluetooth device, specify bluetooth:address. The address must be six two-digit
hexadecimal numbers separated by colons, e.g. 01:23:45:67:89:AB.
Serial For a serial device, specify serial:device. The serial: qualifier is optional (for
backward compatibility). If a relative path is given then it's anchored at /dev/ (the
usual location where devices are defined on a Unix-like system). The following device
specifications all refer to the primary serial device on Linux: serial:ttyS0,
serial:/dev/ttyS0, ttyS0, /dev/ttyS0.
USB For a USB device, specify usb:. brltty will search for the first USB device which matches
the braille display driver being used. If this is inadequate, e.g. if you have more than
one USB braille display which requires the same driver, then you can refine the device
specification by appending the serial number of the display to it, e.g. usb:12345. N.B.:
The "identification by serial number" feature doesn't work for some models because some
manufacturers either don't set the USB serial number descriptor at all or do set it but not
to a unique value.
A comma-delimited list of braille devices may be specified. If this is done then autodetection is
performed on each listed device in sequence. This feature is particularly useful if you have a
braille display with more than one interface, e.g. both a serial and a USB port.
-e (--standard-error)
Write logs to standard error rather than to the system log (useful for debugging).
-f file (--configuration-file=)
The path to the configuration file. Relative paths are anchored at the current working directory.
The built-in default is /etc/brltty.conf.
-h (--help)
Print a command line usage summary (commonly used options only), and then exit.
-i name (--speech-input=)
The file system object (FIFO, named pipe, named socket, etc) which gives other applications access
to brltty's speech driver for text-to-speech conversion. It's created at start-up and removed at
termination. Relative paths are anchored at the current working directory. The built-in default
is that the file system object is not created.
-k table (--keyboard-table=)
The path to the keyboard table. Relative paths are anchored at /etc/brltty/Keyboard. The .ktb
extension is optional.
-l level (--log-level=)
The minimum severity level for messages written to the log. Any of the following numbers, or any
abbreviation of their corresponding names, may be specified:
0 emergency
1 alert
2 critical
3 error
4 warning
5 notice
6 information
7 debug
The built-in default is notice.
-m device (--midi-device=)
The device to use for the Musical Instrument Digital Interface. For ALSA it's client:port, where
each may be either a number or a case-sensitive substring of its name. For other interfaces it's
the full path to an appropriate system device. The built-in default is:
Linux/ALSA the first available MIDI output port
Linux/OSS /dev/sequencer
-n (--no-daemon)
Remain in the foreground (useful for debugging).
-o name=value,... (--override-preference=)
Override a preference setting. For the location of the preferences file, see the -F
(--preferences-file) option.
-p device (--pcm-device=)
The device to use for digital audio. For ALSA it's name[:argument,...]. For other interfaces
it's the full path to an appropriate system device. The built-in default is:
FreeBSD /dev/dsp
Linux/ALSA hw:0,0
Linux/OSS /dev/dsp
NetBSD /dev/audio
OpenBSD /dev/audio
Qnx the preferred PCM output device
Solaris /dev/audio
-q (--quiet)
Suppress the start-up messages. This is done by reducing the default log level (see the -l
(--log-level=) option) to warning (information if either -v (--verify) or -V (--version) is also
specified).
-r (--release-device)
Release the device to which the braille display is connected when the current screen or window
can't be read.
-s driver,...|auto (--speech-driver=)
The driver for the speech synthesizer (see Driver Specification). The built-in default is auto.
-t table (--text-table=)
The path to the text table. Relative paths are anchored at /etc/brltty/Text. The .ttb extension
is optional. The built-in default is en-nabcc.ttb (the North American Braille Computer Code).
-v (--verify)
Print the start-up messages and then exit. This always includes the versions of brltty itself,
the server side of its application programming interface, and each of the selected braille and
speech drivers. If the -q (--quiet) option isn't also specified then it also includes the values
of the options after all sources have been considered. If more than one braille driver and/or
more than one braille device has been specified then braille display autodetection is performed.
If more than one speech driver has been specified then speech synthesizer autodetection is
performed.
-x driver (--screen-driver=)
The screen driver. The built-in default is operating system appropriate.
-A name=value,... (--api-parameters=)
Parameters for the application programming interface. If the same parameter is specified more
than once then the rightmost specification is used. Parameter names may be abbreviated.
-B [driver:]name=value,... (--braille-parameters=)
Parameters for the braille display driver. If the same parameter is specified more than once then
the rightmost specification is used. Parameter names may be abbreviated. If a parameter
assignment is qualified with a driver identification code then it's only processed if that braille
display driver is being used.
-D directory (--drivers-directory=)
The path to the directory which contains the dynamically loadable driver objects. The built-in
default is /lib/brltty.
-E (--environment-variables)
Recognize environment variables.
-F file (--preferences-file=)
The path to the preferences file. Relative paths are anchored at /var/lib/brltty. The built-in
default is brltty.prefs.
-H (--full-help)
Print a command line usage summary (all options), and then exit.
-I (--install-service)
(Windows only) Install brltty as the BrlAPI service so that it will be automatically started when
the system is booted, and so that applications can know that a BrlAPI server is running.
-K arg (--keyboard-properties=)
Properties of the keyboard.
-L file (--log-file=)
The file to which log messages are written. Relative paths are anchored at the current working
directory. The default is to send log messages to the system log.
-M csecs (--message-delay=)
The message hold time in hundredths of a second. The built-in default is 400 (4 seconds).
-N (--no-api)
Don't start the application programming interface.
-P file (--pid-file=)
The full path to the process identifier file. If this option is supplied, brltty writes its
process identifier (pid) into the specified file at start-up. The file is removed when brltty
terminates.
-R (--remove-service)
(Windows only) Remove the BrlAPI service so that brltty will not be automatically started when the
system is booted, and so that applications can know that no BrlAPI server is running.
-S [driver:]name=value,... (--speech-parameters=)
Parameters for the speech synthesizer driver. If the same parameter is specified more than once
then the rightmost specification is used. Parameter names may be abbreviated. If a parameter
assignment is qualified with a driver identification code then it's only processed if that speech
synthesizer driver is being used.
-T directory (--tables-directory=)
The path to the directory which contains the text, contraction, attributes, keyboard, and input
tables. The built-in default is /etc/brltty.
-U directory (--updatable-directory=)
The path to a directory which contains files that can be updated. The built-in default is
/var/lib/brltty.
-V (--version)
Print the versions of brltty itself, the server side of its application programming interface, and
those drivers which were configured in at build-time, and then exit. If the -q (--quiet) option
isn't also specified then also print copyright information.
-W directory (--writable-directory=)
The path to a directory which can be written to. The built-in default is /run/brltty.
-X name=value,... (--screen-parameters=)
Parameters for the screen driver. If the same parameter is specified more than once then the
rightmost specification is used. Parameter names may be abbreviated.
-Y text (--start-message=)
The text to be shown when the braille driver starts and to be spoken when the speech driver
starts. The built-in default is BRLTTY 6.4.
-Z text (--stop-message=)
The text to be shown when the braille driver stops. The built-in default is BRLTTY stopped.
Environment Variables
The following environment variables are recognized if the -E (--environment-variables) option is
specified:
BRLTTY_API_PARAMETERS=name=value,...
Parameters for the application programming interface. See the -A (--api-parameters=) option for
details.
BRLTTY_ATTRIBUTES_TABLE=table
The attributes table. See the -a (--attributes-table=) option for details.
BRLTTY_BRAILLE_DEVICE=device,...
The device to which the braille display is connected. See the -d (--braille-device=) option for
details.
BRLTTY_BRAILLE_DRIVER=driver,...|auto
The driver for the braille display. See the -b (--braille-driver=) option for details.
BRLTTY_BRAILLE_PARAMETERS=[driver:]name=value,...
Parameters for the braille display driver. See the -B (--braille-parameters=) option for details.
BRLTTY_CONFIGURATION_FILE=file
The configuration file. See the -f (--configuration-file=) option for details.
BRLTTY_CONTRACTION_TABLE=table
The contraction table. See the -c (--contraction-table=) option for details.
BRLTTY_MIDI_DEVICE=device
The device to use for the Musical Instrument Digital Interface. See the -m (--midi-device=)
option for details.
BRLTTY_PCM_DEVICE=device
The device to use for digital audio. See the -p (--pcm-device=) option for details.
BRLTTY_PREFERENCES_FILE=file
The preferences file. See the -F (--preferences-file=) option for details.
BRLTTY_RELEASE_DEVICE=on|off
Release the device to which the braille display is connected when the current screen or window
can't be read. See the -r (--release-device) option for details.
BRLTTY_SCREEN_DRIVER=driver
The screen driver. See the -x (--screen-driver=) option for details.
BRLTTY_SCREEN_PARAMETERS=name=value,...
Parameters for the screen driver. See the -X (--screen-parameters=) option for details.
BRLTTY_SPEECH_DRIVER=driver,...|auto
The driver for the speech synthesizer. See the -s (--speech-driver=) option for details.
BRLTTY_SPEECH_INPUT=name
The file system object which gives other applications access to brltty's speech driver for text-
to-speech conversion. See the -i (--speech-input=) option for details.
BRLTTY_SPEECH_PARAMETERS=[driver:]name=value,...
Parameters for the speech synthesizer driver. See the -S (--speech-parameters=) option for
details.
BRLTTY_TEXT_TABLE=table
The text table. See the -t (--text-table=) option for details.
The Configuration File
Blank lines are ignored. If the character # occurs on any line then all characters from it to the end of
that line are treated as a comment.
The following configuration directives are supported:
api-parameters name=value,...
Parameters for the application programming interface. See the -A (--api-parameters=) option for
details.
attributes-table table
The attributes table. See the -a (--attributes-table=) option for details.
braille-device device,...
The device to which the braille display is connected. See the -d (--braille-device=) option for
details.
braille-driver driver,...|auto
The driver for the braille display. See the -b (--braille-driver=) option for details.
braille-parameters [driver:]name=value,...
Parameters for the braille display driver. See the -B (--braille-parameters=) option for details.
contraction-table table
The contraction table. See the -c (--contraction-table=) option for details.
midi-device device
The device to use for the Musical Instrument Digital Interface. See the -m (--midi-device=)
option for details.
pcm-device device
The device to use for digital audio. See the -p (--pcm-device=) option for details.
preferences-file file
The preferences file. See the -F (--preferences-file=) option for details.
release-device on|off
Release the device to which the braille display is connected when the current screen or window
can't be read. See the -r (--release-device) option for details.
screen-driver driver
The screen driver. See the -x (--screen-driver=) option for details.
screen-parameters name=value,...
Parameters for the screen driver. See the -X (--screen-parameters=) option for details.
speech-driver driver,...|auto
The driver for the speech synthesizer. See the -s (--speech-driver=) option for details.
speech-input 0me
The file system object which gives other applications access to brltty's speech driver for
text-to-speech conversion. See the -i (--speech-input=) option for details.
speech-parameters [driver:]name=value,...
Parameters for the speech synthesizer driver. See the -S (--speech-parameters=) option for
details.
text-table table
The text table. See the -t (--text-table=) option for details.
Driver Specification
A braille display or speech synthesizer driver must be specified via its identification code:
al Alva
an Android
at Albatross
ba BrlAPI
bc BrailComm
bd Braudi
bl BrailleLite
bm Baum
bn BrailleNote
cb CombiBraille
ce Cebra
cn Canute
ec EcoBraille
en eSpeak-NG
es eSpeak
eu EuroBraille
fa FrankAudiodata
fl FestivalLite
fs FreedomScientific
fv Festival
gs GenericSay
hd Hedo
hm HIMS
ht HandyTech
hw HumanWare
ir Iris
ic Inceptor
lb Libbraille
lt LogText
mb MultiBraille
md MDV
mm BrailleMemo
mn MiniBraille
mp Mikropuhe
mt Metec
no no driver
np NinePoint
pg Pegasus
pm Papenmeier
sd SpeechDispatcher
sk Seika
sw Swift
th Theta
tn TechniBraille Systems Inc.
ts Telesensory Systems Inc.
vd VideoBraille
vo Voyager, Part232 (serial adapter), BraillePen/EasyLink
vs VisioBraille
vv ViaVoice
xs ExternalSpeech
A comma-delimited list of drivers may be specified. If this is done then autodetection is
performed using each listed driver in sequence. You may need to experiment in order to determine
the most reliable order since some drivers autodetect better than others.
If the single word auto is specified then autodetection is performed using only those drivers
which are known to be reliable for this purpose.
SEE ALSO
For full documentation, see brltty's on-line manual at [http://brltty.app/documentation.html].