Provided by: dfu-programmer_0.6.1-1build1_amd64 
NAME
dfu-programmer - USB firmware upgrading for Atmel microcontrollers
SYNOPSIS
dfu-programmer target[:usb-bus,usb-addr] command [options] [parameters]
dfu-programmer --help
dfu-programmer --targets
dfu-programmer --version
DESCRIPTION
dfu-programmer is a multi-platform command line Device Firmware Upgrade (DFU) based programmer for the
flash memory on Atmel AVR, AVR32, XMEGA and 8051 based microcontrollers which ship with a USB boot
loader. It supports In System Programming (ISP) for developers and potentially product updates in the
field. Those boot loaders are patterned after the standard USB DFU 1.0 class specification, but depend
on extensions defined by Atmel to the extent that standard DFU drivers will not work.
To use it, first connect the device to be programmed and ensure that it comes up in DFU mode. The
microcontrollers come up in that mode as shipped by Atmel; or they may reenter that mode after a special
hardware reset. Then invoke this program to issue one or more DFU commands. You will normally need to
start by issuing the "erase" command; the default security policies prevent extracting firmware, to
prevent reverse engineering of what is usually proprietary code.
SUPPORTED MICROCONTROLLERS
These chip names are used as the command line "target" parameter.
8051 based controllers:
at89c51snd1c, at89c51snd2c, at89c5130, at89c5131, and at89c5132.
AVR based controllers:
at90usb1287, at90usb1286, at90usb647, at90usb646, at90usb162, at90usb82, atmega32u6, atmega32u4,
atmega32u2, atmega16u4, atmega16u2 and atmega8u2.
AVR32 based controllers:
at32uc3a0128, at32uc3a1128, at32uc3a0256, at32uc3a1256, at32uc3a0512, at32uc3a1512,
at32uc3a0512es, at32uc3a1512es, at32uc3a364, at32uc3a364s, at32uc3a3128, at32uc3a3128s,
at32uc3a3256, at32uc3a3256s, at32uc3a4256s, at32uc3b064, at32uc3b164, at32uc3b0128, at32uc3b1128,
at32uc3b0256, at32uc3b1256, at32uc3b0256es, at32uc3b1256es, at32uc3b1512, at32uc3b0512,
at32uc3c064, at32uc3c0128, at32uc3c0256, at32uc3c0512, at32uc3c164, at32uc3c1128, at32uc3c1256,
at32uc3c1512, at32uc3c264, at32uc3c2128, at32uc3c2256 and at32uc3c2512.
XMEGA based controllers:
atxmega64a1u, atxmega128a1u, atxmega64a3u, atxmega128a3u, atxmega192a3u, atxmega256a3u,
atxmega16a4u, atxmega32a4u, atxmega64a4u, atxmega128a4u, atxmega256a3bu, atxmega64b1,
atxmega128b1, atxmega64b3, atxmega128b3, atxmega64c3, atxmega128c3, atxmega256c3, atxmega384c3
USAGE
There are no mechanisms to implement gang programming. By default, the first device that matches the id
codes for the given target is selected. Many targets share the same id codes. Accordingly, you will
usually avoid connecting more than one device of a given family (AVR, XMEGA, AVR32 or 8051) at a time.
The target may be qualified with the USB bus and address number of the device you wish to program. This
allows programming multiple devices of the same family at the same time.
All of these commands support the "global options". Unless you override it, commands which write to the
microcontroller will perform a validation step that rereads the data which was written, compares it to
the expected result, and reports any errors.
Note that unlike Atmel's BatchISP program, dfu-programmer will only perform a single operation at a time.
Erasing and programming require separate commands.
configure register [--suppress-validation] data
Bootloaders for 8051 based controllers support writing certain configuration bytes.
dump
Reads all the available flash memory, and writes it as binary data to stdout.
dump-eeprom
Reads all the available eeprom memory, and writes it as binary data to stdout.
dump-user
Reads the user space flash on the AVR32 chips and writes it as binary data to stdout.
erase [--suppress-validation]
Erases all the flash memory. This is required before the bootloader will perform other commands.
flash [--suppress-validation] [--suppress-bootloader-mem] [--serial=hexbytes:offset] file or STDIN
Writes flash memory. The input file (or stdin) must use the "ihex" file format convention for a
memory image. --suppress-bootloader-mem ignores any data written to the bootloader memory space
when flashing the device. This option is particularly useful for the AVR32 chips trampoline code.
--serial provides a way to inject a serial number or other unique sequence of bytes into the memory image
programmed into the device. This allows using a single .ihex file to program multiple devices, and still
give each device its own unique serial number. For example, --serial=ABCDEF01:0x6000 would program the
byte at 0x6000 with the hex value AB, the byte at 0x6001 with the value CD, and so on. There must be an
even number of hex digits, but the sequence can be any length. The offset is assumed to be given in hex
if it starts with a "0x" prefix, octal if it begins with a "0", otherwise is it assumed to be decimal.
flash-user [--suppress-validation] [--serial=hexbytes:offset] file or STDIN
Writes to user space flash on the AVR32 chips. This block of flash is out of the normal range of
flash blocks and is designed to contain configuration parameters. The input file (or stdin) must
use the "ihex" file format convention for a memory image.
flash-eeprom [--suppress-validation] [--serial=hexbytes:offset] file or STDIN
Writes to eeprom memory. The input file (or stdin) must use the "ihex" file format convention for
a memory image.
setsecure
Sets the security bit on AVR32 chips. This prevents the content being read back from the chip,
except in the same session in which it was programmed. When the security fuse is set, almost
nothing will work without first executing the erase command. The only way to clear the security
fuse once set is to use a JTAG chip erase, which will also erase the bootloader.
get register
Displays various product identifier bytes.
reset
Resets microcontroller using watchdog timer
start
Starts the application firmware by having the microcontroller jump to address zero.
Global Options
--quiet - minimizes the output
--debug level - enables verbose output at the specified level
Configure Registers
The standard bootloader for 8051 based chips supports writing data bytes which are not relevant for the
AVR based chips.
BSB - boot status byte
SBV - software boot vector
SSB - software security byte
EB - extra byte
HSB - hardware security byte
Get Register
bootloader-version - currently flashed bootloader version
ID1 - device boot identification 1
ID2 - device boot identification 2
manufacturer - the hardware manufacturer code
family - the product family code
product-name - the product name
product-revision - the product revision
HSB - same as the configure_register version
BSB - same as the configure_register version
SBV - same as the configure_register version
SSB - same as the configure_register version
EB - same as the configure_register version
BUGS
None known.
KNOWN ISSUES
The at90usb series chips do not make available any read/write protect flags so the dump or flash command
may fail with a less than helpful error message.
To remove any write or read protection from any chips, a full chip erasure is required. For AVR32 chips
an erase operation over USB will remove protection until the device is rebooted. To remove the protection
more permanently requires a JTAG erase (which will also erase the bootloader).
You may need to be a member of the uucp group in order to have access to the device without needing to be
root.
AUTHOR
Weston Schmidt <weston_schmidt@alumni.purdue.edu>