Provided by: bind9-utils_9.18.28-0ubuntu0.22.04.1_amd64 
NAME
dnssec-keygen - DNSSEC key generation tool
SYNOPSIS
dnssec-keygen [-3] [-A date/offset] [-a algorithm] [-b keysize] [-C] [-c class] [-D
date/offset] [-d bits] [-D sync date/offset] [-E engine] [-f flag] [-G] [-g generator]
[-h] [-I date/offset] [-i interval] [-K directory] [-k policy] [-L ttl] [-l file] [-n
nametype] [-P date/offset] [-P sync date/offset] [-p protocol] [-q] [-R date/offset] [-S
key] [-s strength] [-T rrtype] [-t type] [-V] [-v level] {name}
DESCRIPTION
dnssec-keygen generates keys for DNSSEC (Secure DNS), as defined in RFC 2535 and RFC 4034.
The name of the key is specified on the command line. For DNSSEC keys, this must match the
name of the zone for which the key is being generated.
OPTIONS
-3 This option uses an NSEC3-capable algorithm to generate a DNSSEC key. If this
option is used with an algorithm that has both NSEC and NSEC3 versions, then the
NSEC3 version is selected; for example, dnssec-keygen -3 -a RSASHA1 specifies the
NSEC3RSASHA1 algorithm.
-a algorithm
This option selects the cryptographic algorithm. For DNSSEC keys, the value of
algorithm must be one of RSASHA1, NSEC3RSASHA1, RSASHA256, RSASHA512,
ECDSAP256SHA256, ECDSAP384SHA384, ED25519, or ED448. For TKEY, the value must be DH
(Diffie-Hellman); specifying this value automatically sets the -T KEY option as
well.
These values are case-insensitive. In some cases, abbreviations are supported, such
as ECDSA256 for ECDSAP256SHA256 and ECDSA384 for ECDSAP384SHA384. If RSASHA1 is
specified along with the -3 option, NSEC3RSASHA1 is used instead.
This parameter must be specified except when using the -S option, which copies the
algorithm from the predecessor key.
In prior releases, HMAC algorithms could be generated for use as TSIG keys, but
that feature was removed in BIND 9.13.0. Use tsig-keygen to generate TSIG keys.
-b keysize
This option specifies the number of bits in the key. The choice of key size depends
on the algorithm used: RSA keys must be between 1024 and 4096 bits; Diffie-Hellman
keys must be between 128 and 4096 bits. Elliptic curve algorithms do not need this
parameter.
If the key size is not specified, some algorithms have pre-defined defaults. For
example, RSA keys for use as DNSSEC zone-signing keys have a default size of 1024
bits; RSA keys for use as key-signing keys (KSKs, generated with -f KSK) default to
2048 bits.
-C This option enables compatibility mode, which generates an old-style key, without
any timing metadata. By default, dnssec-keygen includes the key's creation date in
the metadata stored with the private key; other dates may be set there as well,
including publication date, activation date, etc. Keys that include this data may
be incompatible with older versions of BIND; the -C option suppresses them.
-c class
This option indicates that the DNS record containing the key should have the
specified class. If not specified, class IN is used.
-d bits
This option specifies the key size in bits. For the algorithms RSASHA1,
NSEC3RSASA1, RSASHA256, and RSASHA512 the key size must be between 1024 and 4096
bits; DH size is between 128 and 4096 bits. This option is ignored for algorithms
ECDSAP256SHA256, ECDSAP384SHA384, ED25519, and ED448.
-E engine
This option specifies the cryptographic hardware to use, when applicable.
When BIND 9 is built with OpenSSL, this needs to be set to the OpenSSL engine
identifier that drives the cryptographic accelerator or hardware service module
(usually pkcs11).
-f flag
This option sets the specified flag in the flag field of the KEY/DNSKEY record.
The only recognized flags are KSK (Key-Signing Key) and REVOKE.
-G This option generates a key, but does not publish it or sign with it. This option
is incompatible with -P and -A.
-g generator
This option indicates the generator to use if generating a Diffie-Hellman key.
Allowed values are 2 and 5. If no generator is specified, a known prime from RFC
2539 is used if possible; otherwise the default is 2.
-h This option prints a short summary of the options and arguments to dnssec-keygen.
-K directory
This option sets the directory in which the key files are to be written.
-k policy
This option creates keys for a specific dnssec-policy. If a policy uses multiple
keys, dnssec-keygen generates multiple keys. This also creates a ".state" file to
keep track of the key state.
This option creates keys according to the dnssec-policy configuration, hence it
cannot be used at the same time as many of the other options that dnssec-keygen
provides.
-L ttl This option sets the default TTL to use for this key when it is converted into a
DNSKEY RR. This is the TTL used when the key is imported into a zone, unless there
was already a DNSKEY RRset in place, in which case the existing TTL takes
precedence. If this value is not set and there is no existing DNSKEY RRset, the TTL
defaults to the SOA TTL. Setting the default TTL to 0 or none is the same as
leaving it unset.
-l file
This option provides a configuration file that contains a dnssec-policy statement
(matching the policy set with -k).
-n nametype
This option specifies the owner type of the key. The value of nametype must either
be ZONE (for a DNSSEC zone key (KEY/DNSKEY)), HOST or ENTITY (for a key associated
with a host (KEY)), USER (for a key associated with a user (KEY)), or OTHER
(DNSKEY). These values are case-insensitive. The default is ZONE for DNSKEY
generation.
-p protocol
This option sets the protocol value for the generated key, for use with -T KEY. The
protocol is a number between 0 and 255. The default is 3 (DNSSEC). Other possible
values for this argument are listed in RFC 2535 and its successors.
-q This option sets quiet mode, which suppresses unnecessary output, including
progress indication. Without this option, when dnssec-keygen is run interactively
to generate an RSA or DSA key pair, it prints a string of symbols to stderr
indicating the progress of the key generation. A . indicates that a random number
has been found which passed an initial sieve test; + means a number has passed a
single round of the Miller-Rabin primality test; and a space ( ) means that the
number has passed all the tests and is a satisfactory key.
-S key This option creates a new key which is an explicit successor to an existing key.
The name, algorithm, size, and type of the key are set to match the existing key.
The activation date of the new key is set to the inactivation date of the existing
one. The publication date is set to the activation date minus the prepublication
interval, which defaults to 30 days.
-s strength
This option specifies the strength value of the key. The strength is a number
between 0 and 15, and currently has no defined purpose in DNSSEC.
-T rrtype
This option specifies the resource record type to use for the key. rrtype must be
either DNSKEY or KEY. The default is DNSKEY when using a DNSSEC algorithm, but it
can be overridden to KEY for use with SIG(0).
-t type
This option indicates the type of the key for use with -T KEY. type must be one of
AUTHCONF, NOAUTHCONF, NOAUTH, or NOCONF. The default is AUTHCONF. AUTH refers to
the ability to authenticate data, and CONF to the ability to encrypt data.
-V This option prints version information.
-v level
This option sets the debugging level.
TIMING OPTIONS
Dates can be expressed in the format YYYYMMDD or YYYYMMDDHHMMSS (which is the format used
inside key files), or 'Day Mon DD HH:MM:SS YYYY' (as printed by dnssec-settime -p), or
UNIX epoch time (as printed by dnssec-settime -up), or the literal now.
The argument can be followed by + or - and an offset from the given time. The literal now
can be omitted before an offset. The offset can be followed by one of the suffixes y, mo,
w, d, h, or mi, so that it is computed in years (defined as 365 24-hour days, ignoring
leap years), months (defined as 30 24-hour days), weeks, days, hours, or minutes,
respectively. Without a suffix, the offset is computed in seconds.
To unset a date, use none, never, or unset.
-P date/offset
This option sets the date on which a key is to be published to the zone. After that
date, the key is included in the zone but is not used to sign it. If not set, and
if the -G option has not been used, the default is the current date.
sync date/offset
This option sets the date on which CDS and CDNSKEY records that match this
key are to be published to the zone.
-A date/offset
This option sets the date on which the key is to be activated. After that date, the
key is included in the zone and used to sign it. If not set, and if the -G option
has not been used, the default is the current date. If set, and -P is not set, the
publication date is set to the activation date minus the prepublication interval.
-R date/offset
This option sets the date on which the key is to be revoked. After that date, the
key is flagged as revoked. It is included in the zone and is used to sign it.
-I date/offset
This option sets the date on which the key is to be retired. After that date, the
key is still included in the zone, but it is not used to sign it.
-D date/offset
This option sets the date on which the key is to be deleted. After that date, the
key is no longer included in the zone. (However, it may remain in the key
repository.)
sync date/offset
This option sets the date on which the CDS and CDNSKEY records that match
this key are to be deleted.
-i interval
This option sets the prepublication interval for a key. If set, then the
publication and activation dates must be separated by at least this much time. If
the activation date is specified but the publication date is not, the publication
date defaults to this much time before the activation date; conversely, if the
publication date is specified but not the activation date, activation is set to
this much time after publication.
If the key is being created as an explicit successor to another key, then the
default prepublication interval is 30 days; otherwise it is zero.
As with date offsets, if the argument is followed by one of the suffixes y, mo, w,
d, h, or mi, the interval is measured in years, months, weeks, days, hours, or
minutes, respectively. Without a suffix, the interval is measured in seconds.
GENERATED KEYS
When dnssec-keygen completes successfully, it prints a string of the form Knnnn.+aaa+iiiii
to the standard output. This is an identification string for the key it has generated.
• nnnn is the key name.
• aaa is the numeric representation of the algorithm.
• iiiii is the key identifier (or footprint).
dnssec-keygen creates two files, with names based on the printed string.
Knnnn.+aaa+iiiii.key contains the public key, and Knnnn.+aaa+iiiii.private contains the
private key.
The .key file contains a DNSKEY or KEY record. When a zone is being signed by named or
dnssec-signzone -S, DNSKEY records are included automatically. In other cases, the .key
file can be inserted into a zone file manually or with an $INCLUDE statement.
The .private file contains algorithm-specific fields. For obvious security reasons, this
file does not have general read permission.
EXAMPLE
To generate an ECDSAP256SHA256 zone-signing key for the zone example.com, issue the
command:
dnssec-keygen -a ECDSAP256SHA256 example.com
The command prints a string of the form:
Kexample.com.+013+26160
In this example, dnssec-keygen creates the files Kexample.com.+013+26160.key and
Kexample.com.+013+26160.private.
To generate a matching key-signing key, issue the command:
dnssec-keygen -a ECDSAP256SHA256 -f KSK example.com
SEE ALSO
dnssec-signzone(8), BIND 9 Administrator Reference Manual, RFC 2539, RFC 2845, RFC 4034.
AUTHOR
Internet Systems Consortium
COPYRIGHT
2024, Internet Systems Consortium