NAME

       gpu-plot - continuously update and plot critical GPU parameters as a function of time

SYNOPSIS

       gpu-plot [--help | --about]
       gpu-plot [--no_fan] [--stdin] [--simlog] [--ltz] [--sleep N] [--debug]

DESCRIPTION

       gpu-plot  is  a  utility to continuously plot the trend of critical GPU parameters for all
       compatible GPUs. The --sleep N can be used to specify the update interval.   The  gpu-plot
       utility  has  2  modes  of  operation.  The default mode is to read the GPU driver details
       directly, which is useful as a standalone utility.  The --stdin option causes gpu-plot  to
       read  GPU  data from stdin.  This is how gpu-mon produces the plot and can also be used to
       pipe your own data into the process.  The --simlog option can be  used  with  the  --stdin
       when  a monitor log file is piped as stdin.  This is useful for troubleshooting and can be
       used to display saved log results.  The --ltz option results in  the  use  of  local  time
       instead  of  UTC.  If you plan to run both gpu-plot and gpu-mon, then the --plot option of
       the gpu-mon utility should be used instead of both utilities in order reduce data reads by
       a factor of 2.

OPTIONS

        --about
              Will display details about gpu-plot.

        --ltz Use local time zone instead of UTC for displays and logging.

        --no_fan
              Will exclude fan information from the display.  Useful with watercooled GPUs.

        --stdin
              Will  read data from stdin.  This is useful to display plots of a logfile save with
              gpu-mon.

        --simlog
              When used with the --stdin option, it will simulate the reading of  data  from  the
              logfile at a rate define by --sleep.

        --sleep N
              Specifies N, the number of seconds to sleep between updates.

        --debug
              Will output additional useful debug/troubleshooting details to a log file.

       -h, --help
              Display help text and exit.

EXAMPLES

       gpu-plot --sleep 5 --ltz

       Will  open a Gtk window that will display plots of operation parameters for all compatible
       GPU's that updates every 5s.  Time stamps displayed will use local time zone.

       cat logfile | gpu-plot --stdin --simlog --sleep 1

       Will open a Gtk window that will display plots of the GPU operation data in the  specified
       logfile to simulate streamed data with a 1 sec interval.

CONFIGURATION

       In order to get maximum capability of these utilities, you should be running with a kernel
       that provides support of the GPUs you have installed.  If using AMD GPUs,  installing  the
       latest  amdgpu  driver  package  or  the  latest  ROCm  release,  may  provide  additional
       capabilities. If you have Nvidia GPUs installed, nvidia-smi  must  also  be  installed  in
       order  for  the utility reading of the cards to be possible.  Writing to GPUs is currently
       only possible for AMD  GPUs,  and  only  with  compatible  cards  and  with  the  the  AMD
       ppfeaturemask    set    to    0xfffd7fff.    This    can   be   accomplished   by   adding
       amdgpu.ppfeaturemask=0xfffd7fff    to    the    GRUB_CMDLINE_LINUX_DEFAULT    value     in
       /etc/default/grub and executing sudo update-grub.

FILES

       /usr/share/misc/pci.ids
              The  system  list  of  all  known  AMD  PCI  ID's  (vendors,  devices,  classes and
              subclasses).  It can be updated with the update-pciids command.

       /sys/class/drm/card*/device/pp_od_clk_voltage
              Special driver file for each AMD GPU required for some rickslab-gpu-utils.

       /etc/default/grub
              The grub defaults file where amdgpu.ppfeaturemask needs to be set.

BUGS

       Known to not work well with Fiji ProDuo cards and will issue  warning  messages  for  Fiji
       Nano cards.  Please report any additional bugs/issues at https://github.com/Ricks-Lab/gpu-
       utils

SEE ALSO

       cat(1), gpu-mon(1) amdgpu(4), nvidia-smi(1), update-grub(8), update-pciids(8), lspci(8)

AVAILABILITY

       The gpu-plot command is part of the  rickslab-gpu-utils  package  and  is  available  from
       https://github.com/Ricks-Lab/gpu-utils