Ubuntu Manpage: jackd - JACK Audio Connection Kit sound server

Provided by: jackd1_0.125.0-3build2_amd64

NAME

       jackd - JACK Audio Connection Kit sound server

SYNOPSIS

       jackd [options] -d backend [backend-parameters]
       jackd --help

DESCRIPTION

       jackd is the JACK audio server daemon, a low-latency audio server.  Originally written for
       the GNU/Linux operating system, it also supports Mac OS  X  and  various  Unix  platforms.
       JACK  can connect a number of different client applications to an audio device and also to
       each other.  Most  clients  are  external,  running  in  their  own  processes  as  normal
       applications.   JACK  also  supports  internal clients, which run within the jackd process
       using a loadable "plugin" interface.

       JACK differs  from  other  audio  servers  in  being  designed  from  the  ground  up  for
       professional  audio  work.   It  focuses  on  two  key areas: synchronous execution of all
       clients, and low latency operation.

       For the latest JACK information, please consult the web site, <http://www.jackaudio.org>.

OPTIONS

-d, --driver backend [backend-parameters ]
Select the audio interface backend. The current list of supported backends is:
alsa, coreaudio, dummy, freebob, oss sun portaudio and sndio. They are not all
available on all platforms. All backend-parameters are optional.

-h, --help
Print a brief usage message describing the main jackd options. These do not
include backend-parameters, which are listed using the --help option for each
specific backend. Examples below show how to list them.

-m, --no-mlock
Do not attempt to lock memory, even if --realtime.

-A device, -A device%p, -A device%c
(Linux-only) A simplified way to add additional audio I/O hardware to an instance
of JACK. This argument is actually just a wrapper around the -I (internal client)
version, requiring only the name of the ALSA "card" to be used. The name should NOT
include any ALSA device access prefix (e.g. "hw:" or "plughw:") but can include a
subdevice. If %p is added to the device name, it will be made available for
playback only. If %c is added to the device name, it will be made available for
capture (recording) only. If neither %p nor %c is added, it will be made available
(if possible) for both capture and playback. Although device names may be visible
in various places on your system, the file /proc/asound/cards shows them inside
square braces.
Examples:
-A SB (adds playback and capture for the "SB" device)
-A Codec,1%c (adds capture (recording) for the 2nd subdevice of the "Codec"
device)
-A MT1a2%p (adds playback the 1st subdevice of the "MT1a2" device)
The use of -A CARD is actually equivalent to -I foo:zalsa_in/-dhw:CARD and -I
CARD:zalsa_out/-dhw:CARD.
The use of -A CARD%p is actually equivalent to -I CARD:zalsa_out/-dhw:CARD.
The use of -A CARD%c is actually equivalent to -I CARD:zalsa_in/-dhw:CARD
Note that this option (like -I) can be used regardless of the backend used, so even
if you do not use the ALSA backend, you can still add ALSA-supported devices to an
instance of JACK.

-I, --internal-client client-spec
Load client-name as an internal client. May be used multiple times. The form of
client-spec can be any of the following:
client-path
client-name:client-path
client-name:client-path/init-string
client-path/init-string
The first form will cause jackd to attempt to load the client from a shared object
named "client-path" with appropriate suffixes appended. If "client-path" is
absolute, jackd will use that (adding a platform appropriate suffix for a shared
object). If it is not absolute, jackd will look for "client-path" (with an
appropriate suffix) in the same location that drivers and other JACK add-ons are
located.
The second form provides "client-name" as the desired name for the client once
loaded, in addition to the "client-path".
The third form provides an "init-string" in addition to a client name and path,
which will be passed to the client's initialization function.
The final form does not specify the client name, but does include the path to the
client's shared object file and an initializations string.
When invoking JACK from the shell, remember to quote the argument to -I if it
includes spaces.

-M, --midi-bufsize [ event-count ]
Specify the size of the buffer used for MIDI ports. Units are "MIDI events per
process() cycle", where an event occupies up to 4 bytes (as most common MIDI events
do). The default buffer size is 2048 bytes, which is about 500 MIDI events.
Typical values for event-count will range from 10 to about 1000. Be aware that
using very high values along with a large number of ports may cause JACK to fail
to start because of the amount of memory that would be required.

-n, --name server-name
Name this jackd instance server-name. If unspecified, this name comes from the
$JACK_DEFAULT_SERVER environment variable. It will be "default" if that is not
defined.

-p, --port-max n
Set the maximum number of ports the JACK server can manage. The default value is
256.

--replace-registry
Remove the shared memory registry used by all JACK server instances before startup.
This should rarely be used, and is intended only for occasions when the structure
of this registry changes in ways that are incompatible across JACK versions (which
is rare).

-R, --realtime
Use realtime scheduling (default = true). This is needed for reliable low-latency
performance. On many systems, it requires jackd to run with special scheduler and
memory allocation privileges, which may be obtained in several ways.

-r, --no-realtime
Do not use realtime scheduling.

-P, --realtime-priority int
When running --realtime, set the scheduler priority to int.

--silent
Silence any output during operation.

-S, --sync
This option does nothing in this implementation of JACK, but exists for command-
line compatibility with JACK2 and possibly other versions.

-T, --temporary
Exit once all clients have closed their connections.

-t, --timeout int
Set client timeout limit in milliseconds. The default is 500 msec.

-X, --slave-driver driver-name
Asks the server to load the "slave" driver given by driver-name. Slave drivers can
provide builtin-access to other devices and protocols; the primary slave-driver at
this time is the "alsa_midi" one which provides bridging on Linux between native
ALSA MIDI and JACK MIDI.

-Z, --nozombies
Prevent JACK from ever kicking out clients because they were too slow. This
cancels the effect any specified timeout value.

-C, --timeout-thres time
Stop processing clients if JACK cannot complete the process cycle in time
(typically caused by CPU overloading or misbehaved clients). The optional time
argument specifies the number of miliseconds, during which consectutive process
cycles must fail before JACK gives up (if the argument is not given, it defaults to
250). Processing will resume on the next change to the port graph (i.e. a port is
added, removed, connected or disconnected)

-u, --unlock
Unlock libraries GTK+, QT, FLTK, Wine.

-v, --verbose
Give verbose output.

-c, --clocksource ( h(pet) | s(ystem) )
Select a specific wall clock (HPET timer or the system clock). Asking for the now
removed cycle-counter timer usiung -c c will result in the use of the system clock.

-V, --version
Print the current JACK version number and exit.

ALSA BACKEND OPTIONS
-C, --capture [ name ]
Provide only capture ports, unless combined with -D or -P. Parameterally set
capture device name.

-d, --device name
The ALSA pcm device name to use. If none is specified, JACK will use "hw:0", the
first hardware card defined in /etc/modules.conf.

-z, --dither [rectangular,triangular,shaped,none]
Set dithering mode. If none or unspecified, dithering is off. Only the first
letter of the mode name is required.

-D, --duplex
Provide both capture and playback ports. Defaults to on unless only one of -P or
-C is specified.

-h, --help Print a brief usage message describing only the
alsa backend parameters.

-M, --hwmeter
Enable hardware metering for devices that support it. Otherwise, use software
metering.

-H, --hwmon
Enable hardware monitoring of capture ports. This is a method for obtaining "zero
latency" monitoring of audio input. It requires support in hardware and from the
underlying ALSA device driver.

When enabled, requests to monitor capture ports will be satisfied by creating a
direct signal path between audio interface input and output connectors, with no
processing by the host computer at all. This offers the lowest possible latency
for the monitored signal.

Presently (March 2003), only the RME Hammerfall series and cards based on the
ICE1712 chipset (M-Audio Delta series, Terratec, and others) support --hwmon. In
the future, some consumer cards may also be supported by modifying their mixer
settings.

Without --hwmon, port monitoring requires JACK to read audio into system memory,
then copy it back out to the hardware again, imposing the basic JACK system latency
determined by the --period and --nperiods parameters.

-i, --inchannels int
Number of capture channels. Default is maximum supported by hardware.

-n, --nperiods int
Specify the number of periods of playback latency. In seconds, this corresponds to
--nperiods times --period divided by --rate. The default is 2, the minimum
allowable. For most devices, there is no need for any other value with the
--realtime option. Without realtime privileges or with boards providing unreliable
interrupts (like ymfpci), a larger value may yield fewer xruns. This can also help
if the system is not tuned for reliable realtime scheduling.

For most ALSA devices, the hardware buffer has exactly --period times --nperiods
frames. Some devices demand a larger buffer. If so, JACK will use the smallest
possible buffer containing at least --nperiods, but the playback latency does not
increase.

For USB audio devices it is recommended to use -n 3. Firewire devices supported by
FFADO (formerly Freebob) are configured with -n 3 by default.

-o, --outchannels int
Number of playback channels. Default is maximum supported by hardware.

-P, --playback [ name ]
Provide only playback ports, unless combined with -D or -C. Optionally set
playback device name.

-p, --period int
Specify the number of frames between JACK process() calls. This value must be a
power of 2, and the default is 1024. If you need low latency, set -p as low as you
can go without seeing xruns. A larger period size yields higher latency, but makes
xruns less likely. The JACK capture latency in seconds is --period divided by
--rate.

-r, --rate int
Specify the sample rate. The default is 48000.

-S, --shorts
Try to configure card for 16-bit samples first, only trying 32-bits if
unsuccessful. Default is to prefer 32-bit samples.

-s, --softmode
Ignore xruns reported by the ALSA driver. This makes JACK less likely to
disconnect unresponsive ports when running without --realtime.

-X, --midi seq
Provide bridging between ALSA MIDI and JACK MIDI (using the ALSA sequencer system).
All ALSA MIDI clients and MIDI hardware that exist when jackd starts will be
represented by JACK MIDI ports.
The "seq" argument has been retained from older versions of JACK, in part to
provide for the possibility of alternate implementations.

COREAUDIO BACKEND PARAMETERS
-c --channel
Maximum number of channels (default: 2)

-i --channelin
Maximum number of input channels (default: 2)

-o --channelout
Maximum number of output channels (default: 2)

-C --capture
Whether or not to capture (default: true)

-P --playback
Whether or not to playback (default: true)

-D --duplex
Capture and playback (default: true)

-r --rate
Sample rate (default: 44100)

-p --period
Frames per period (default: 128). Must be a power of 2.

-n --name
Driver name (default: none)

-I --id
Audio Device ID (default: 0)

DUMMY BACKEND PARAMETERS
-C, --capture int
Specify number of capture ports. The default value is 2.

-P, --playback int
Specify number of playback ports. The default value is 2.

-r, --rate int
Specify sample rate. The default value is 48000.

-w, --wait int
Specify number of usecs to wait between engine processes. The default value is
21333.

NET BACKEND PARAMETERS
-i, --audio-ins int
Number of capture channels (default: 2)

-o, --audio-outs int
Number of playback channels (default: 2)

-I, --midi-ins int
Number of midi capture channels (default: 1)

-O, --midi-outs int
Number of midi playback channels (default: 1)

-r, --rate int
Sample rate (default: 48000)

-p, --period int
Frames per period (default: 1024)

-n, --num-periods int
Network latency setting in no. of periods (default: 5)

-l, --listen-port int
The socket port we are listening on for sync packets (default: 3000)

-f, --factor int
Factor for sample rate reduction (default: 1)

-u, --upstream-factor int
Factor for sample rate reduction on the upstream (default: 0)

-c, --celt int
sets celt encoding and number of kbits per channel (default: 0)

-b, --bit-depth int
Sample bit-depth (0 for float, 8 for 8bit and 16 for 16bit) (default: 0)

-t, --transport-sync int
Whether to slave the transport to the master transport (default: true)

-a, --autoconf int
Whether to use Autoconfig, or just start. (default: true)

-R, --redundancy int
Send packets N times (default: 1)

-e, --native-endian int
Dont convert samples to network byte order. (default: false)

-J, --jitterval int
attempted jitterbuffer microseconds on master (default: 0)

-D, --always-deadline int
always use deadline (default: false)

OSS BACKEND PARAMETERS
-r, --rate int
Specify the sample rate. The default is 48000.

-n, --nperiods int
Specify the number of periods in the hardware buffer. The default is 2. The
period size (-p) times --nperiods times four is the JACK buffer size in bytes. The
JACK output latency in seconds is --nperiods times --period divided by --rate.

-w, --wordlength int
Specify the sample size in bits. The default is 16.

-i, --inchannels int
Specify how many channels to capture (default: 2)

-o, --outchannels int
Specify number of playback channels (default: 2)

-C, --capture device_file
Specify input device for capture (default: /dev/dsp)

-P, --playback device_file
Specify output device for playback (default: /dev/dsp)

-b, --ignorehwbuf boolean
Specify, whether to ignore hardware period size (default: false)

SUN BACKEND PARAMETERS
-r, --rate int
Specify the sample rate. The default is 48000.

-n, --nperiods int
Specify the number of periods in the hardware buffer. The default is 2. The
period size (-p) times --nperiods times four (assuming 2 channels 16-bit samples)
is the JACK buffer size in bytes. The JACK output latency in seconds is --nperiods
times --period divided by --rate.

-w, --wordlength int
Specify the sample size in bits. The default is 16.

-i, --inchannels int
Specify how many channels to capture (default: 2)

-o, --outchannels int
Specify number of playback channels (default: 2)

-C, --capture device_file
Specify input device for capture (default: /dev/audio)

-P, --playback device_file
Specify output device for playback (default: /dev/audio)

-b, --ignorehwbuf boolean
Specify, whether to ignore hardware period size (default: false)

PORTAUDIO BACKEND PARAMETERS
-c --channel
Maximum number of channels (default: all available hardware channels)

-i --channelin
Maximum number of input channels (default: all available hardware channels)

-o --channelout
Maximum number of output channels (default: all available hardware channels)

-C --capture
Whether or not to capture (default: true)

-P --playback
Whether or not to playback (default: true)

-D --duplex
Capture and playback (default: true)

-r --rate
Sample rate (default: 48000)

-p --period
Frames per period (default: 1024). Must be a power of 2.

-n --name
Driver name (default: none)

-z --dither
Dithering mode (default: none)

SNDIO BACKEND PARAMETERS
-r, --rate int
Specify the sample rate. The default is 44100.

-w, --wordlength int
Specify the sample size in bits. The default is 16.

-i, --inchannels int
Specify how many channels to capture (default: 2)

-o, --outchannels int
Specify number of playback channels (default: 2)

-d, --device device_file
Specify device for capture and playback (default: NULL)

-b, --ignorehwbuf boolean
Specify, whether to ignore hardware period size (default: false)

EXAMPLES

Print usage message for the parameters specific to each backend.

jackd -d alsa --help
jackd -d coreaudio --help
jackd -d net --help
jackd -d dummy --help
jackd -d firewire --help
jackd -d freebob --help
jackd -d oss --help
jackd -d sun --help
jackd -d portaudio --help
jackd -d sndio --help

Run the JACK daemon with realtime priority using the first ALSA hardware card defined in
/etc/modules.conf.

jackstart --realtime --driver=alsa

Run the JACK daemon with low latency giving verbose output, which can be helpful for
trouble-shooting system latency problems. A reasonably well-tuned system with a good
sound card and a low-latency kernel can handle these values reliably. Some can do better.
If you get xrun messages, try a larger buffer. Tuning a system for low latency can be
challenging. The JACK FAQ, http://jackit.sourceforge.net/docs/faq.php has some useful
suggestions.

jackstart -Rv -d alsa -p 128 -n 2 -r 44100

Run jackd with realtime priority using the "sblive" ALSA device defined in ~/.asoundrc.
Apply shaped dithering to playback audio.

jackd -R -d alsa -d sblive --dither=shaped

Run jackd with no special privileges using the second ALSA hardware card defined in
/etc/modules.conf. Any xruns reported by the ALSA backend will be ignored. The larger
buffer helps reduce data loss. Rectangular dithering will be used for playback.

jackd -d alsa -d hw:1 -p2048 -n3 --softmode -zr

Run jackd in full-duplex mode using the ALSA hw:0,0 device for playback and the hw:0,2
device for capture.

jackd -d alsa -P hw:0,0 -C hw:0,2

Run jackd in playback-only mode using the ALSA hw:0,0 device.

jackd -d alsa -P hw:0,0

ENVIRONMENT

       JACK is evolving a mechanism for automatically  starting  the  server  when  needed.   Any
       client  started  without  a running JACK server will attempt to start one itself using the
       command line found in the first line of $HOME/.jackdrc if it exists, or /etc/jackdrc if it
       does  not.  If neither file exists, a built-in default command will be used, including the
       -T flag, which causes the server to shut down when all clients have exited.

       As a transition, this only happens when $JACK_START_SERVER is defined in  the  environment
       of  the calling process.  In the future this will become normal behavior.  In either case,
       defining $JACK_NO_START_SERVER disables this feature.

       To change where JACK looks for the backend drivers, set $JACK_DRIVER_DIR.

       $JACK_DEFAULT_SERVER specifies the default  server  name.   If  not  defined,  the  string
       "default" is used.  If set in their respective environments, this affects jackd unless its
       --name parameter is set, and all JACK  clients  unless  they  pass  an  explicit  name  to
       jack_client_open().

BUGS

       Please report bugs to
       http://trac.jackaudio.org/

AUTHORS

       Architect and original implementor: Paul Davis

       Original design Group: Paul Davis, David Olofson, Kai Vehmanen,  Benno  Sennoner,  Richard
       Guenther, and other members of the Linux Audio Developers group.

       Programming:  Paul Davis, Jack O'Quin, Taybin Rutkin, Stephane Letz, Fernando Pablo Lopez-
       Lezcano, Steve Harris, Jeremy Hall, Andy Wingo,  Kai  Vehmanen,  Melanie  Thielker,  Jussi
       Laako, Tilman Linneweh, Johnny Petrantoni, Torben Hohn.

       Manpage written by Stefan Schwandter, Jack O'Quin and Alexandre Prokoudine.

NAME

SYNOPSIS

DESCRIPTION

OPTIONS

EXAMPLES

ENVIRONMENT

SEE ALSO:

BUGS

AUTHORS