Provided by: jdupes_1.20.2-1_amd64 
NAME
jdupes - finds and performs actions upon duplicate files
SYNOPSIS
jdupes [ options ] DIRECTORIES ...
DESCRIPTION
Searches the given path(s) for duplicate files. Such files are found by comparing file
sizes, then partial and full file hashes, followed by a byte-by-byte comparison. The
default behavior with no other "action options" specified (delete, summarize, link,
dedupe, etc.) is to print sets of matching files.
OPTIONS
-@ --loud
output annoying low-level debug info while running
-0 --print-null
when printing matches, use null bytes instead of CR/LF bytes, just like 'find
-print0' does. This has no effect with any action mode other than the default
"print matches" (delete, link, etc. will still print normal line endings in the
output.)
-1 --one-file-system
do not match files that are on different filesystems or devices
-A --no-hidden
exclude hidden files from consideration
-B --dedupe
issue the btrfs same-extents ioctl to trigger a deduplication on disk. The program
must be built with btrfs support for this option to be available
-C --chunk-size=BYTES
set the I/O chunk size manually; larger values may improve performance on rotating
media by reducing the number of head seeks required, but also increases memory
usage and can reduce performance in some cases
-D --debug
if this feature is compiled in, show debugging statistics and info at the end of
program execution
-d --delete
prompt user for files to preserve, deleting all others (see CAVEATS below)
-f --omit-first
omit the first file in each set of matches
-H --hard-links
normally, when two or more files point to the same disk area they are treated as
non-duplicates; this option will change this behavior
-h --help
displays help
-i --reverse
reverse (invert) the sort order of matches
-I --isolate
isolate each command-line parameter from one another; only match if the files are
under different parameter specifications
-L --link-hard
replace all duplicate files with hardlinks to the first file in each set of
duplicates
-m --summarize
summarize duplicate file information
-M --print-summarize
print matches and summarize the duplicate file information at the end
-N --no-prompt
when used together with --delete, preserve the first file in each set of duplicates
and delete the others without prompting the user
-O --param-order
parameter order preservation is more important than the chosen sort; this is
particularly useful with the -N option to ensure that automatic deletion behaves in
a controllable way
-o --order=WORD
order files according to WORD: time - sort by modification time name - sort by
filename (default)
-p --permissions
don't consider files with different owner/group or permission bits as duplicates
-P --print=type
print extra information to stdout; valid options are: early - matches that pass
early size/permission/link/etc. checks partial - files whose partial hashes match
fullhash - files whose full hashes match
-Q --quick
[WARNING: RISK OF DATA LOSS, SEE CAVEATS] skip byte-for-byte verification of
duplicate pairs (use hashes only)
-q --quiet
hide progress indicator
-R --recurse:
for each directory given after this option follow subdirectories encountered within
(note the ':' at the end of option; see the Examples section below for further
explanation)
-r --recurse
for every directory given follow subdirectories encountered within
-l --link-soft
replace all duplicate files with symlinks to the first file in each set of
duplicates
-S --size
show size of duplicate files
-s --symlinks
follow symlinked directories
-T --partial-only
[WARNING: EXTREME RISK OF DATA LOSS, SEE CAVEATS] match based on hash of first
block of file data, ignoring the rest
-u --print-unique
print only a list of unique (non-duplicate, unmatched) files
-v --version
display jdupes version and compilation feature flags
-X --ext-filter=spec:info
exclude/filter files based on specified criteria; general format:
jdupes -X filter[:value][size_suffix]
Some filters take no value or multiple values. Filters that can take a numeric
option generally support the size multipliers K/M/G/T/P/E with or without an added
iB or B. Multipliers are binary-style unless the -B suffix is used, which will use
decimal multipliers. For example, 16k or 16kib = 16384; 16kb = 16000. Multipliers
are case-insensitive.
Filters have cumulative effects: jdupes -X size+:99 -X size-:101 will cause only
files of exactly 100 bytes in size to be included.
Extension matching is case-insensitive. Path substring matching is case-sensitive.
Supported filters are:
`size[+-=]:number[suffix]'
match only if size is greater (+), less than (-), or equal to (=) the
specified number. The +/- and = specifiers can be combined, i.e.
"size+=:4K" will only consider files with a size greater than or equal to
four kilobytes (4096 bytes).
`noext:ext1[,ext2,...]'
exclude files with certain extension(s), specified as a comma-separated
list. Do not use a leading dot.
`onlyext:ext1[,ext2,...]'
only include files with certain extension(s), specified as a comma-separated
list. Do not use a leading dot.
`nostr:text_string'
exclude all paths containing the substring text_string. This scans the full
file path, so it can be used to match directories: -X nostr:dir_name/
`onlystr:text_string'
require all paths to contain the substring text_string. This scans the full
file path, so it can be used to match directories: -X onlystr:dir_name/
`newer:datetime`
only include files newer than specified date. Date/time format: "YYYY-MM-DD
HH:MM:SS" (time is optional).
`older:datetime`
only include files older than specified date. Date/time format: "YYYY-MM-DD
HH:MM:SS" (time is optional).
-z --zero-match
consider zero-length files to be duplicates; this replaces the old default behavior
when -n was not specified
-Z --soft-abort
if the user aborts the program (as with CTRL-C) act on the matches that were found
before the abort was received. For example, if -L and -Z are specified, all matches
found prior to the abort will be hard linked. The default behavior without -Z is to
abort without taking any actions.
NOTES
A set of arrows are used in hard linking to show what action was taken on each link
candidate. These arrows are as follows:
----> This file was successfully hard linked to the first file in the duplicate chain
-@@-> This file was successfully symlinked to the first file in the chain
-==-> This file was already a hard link to the first file in the chain
-//-> Linking this file failed due to an error during the linking process
Duplicate files are listed together in groups with each file displayed on a separate line.
The groups are then separated from each other by blank lines.
EXAMPLES
jdupes a --recurse: b
will follow subdirectories under b, but not those under a.
jdupes a --recurse b
will follow subdirectories under both a and b.
jdupes -O dir1 dir3 dir2
will always place 'dir1' results first in any match set (where relevant)
CAVEATS
Using -1 or --one-file-system prevents matches that cross filesystems, but a more relaxed
form of this option may be added that allows cross-matching for all filesystems that each
parameter is present on.
When using -d or --delete, care should be taken to insure against accidental data loss.
-Z or --soft-abort used to be --hardabort in jdupes prior to v1.5 and had the opposite
behavior. Defaulting to taking action on abort is probably not what most users would
expect. The decision to invert rather than reassign to a different option was made because
this feature was still fairly new at the time of the change.
The -O or --param-order option allows the user greater control over what appears in the
first position of a match set, specifically for keeping the -N option from deleting all
but one file in a set in a seemingly random way. All directories specified on the command
line will be used as the sorting order of result sets first, followed by the sorting
algorithm set by the -o or --order option. This means that the order of all match pairs
for a single directory specification will retain the old sorting behavior even if this
option is specified.
When used together with options -s or --symlink, a user could accidentally preserve a
symlink while deleting the file it points to.
The -Q or --quick option only reads each file once, hashes it, and performs comparisons
based solely on the hashes. There is a small but significant risk of a hash collision
which is the purpose of the failsafe byte-for-byte comparison that this option explicitly
bypasses. Do not use it on ANY data set for which any amount of data loss is unacceptable.
This option is not included in the help text for the program due to its risky nature. You
have been warned!
The -T or --partial-only option produces results based on a hash of the first block of
file data in each file, ignoring everything else in the file. Partial hash checks have
always been an important exclusion step in the jdupes algorithm, usually hashing the first
4096 bytes of data and allowing files that are different at the start to be rejected
early. In certain scenarios it may be a useful heuristic for a user to see that a set of
files has the same size and the same starting data, even if the remaining data does not
match; one example of this would be comparing files with data blocks that are damaged or
missing such as an incomplete file transfer or checking a data recovery against known-good
copies to see what damaged data can be deleted in favor of restoring the known-good copy.
This option is meant to be used with informational actions and can result in EXTREME DATA
LOSS if used with options that delete files, create hard links, or perform other
destructive actions on data based on the matching output. Because of the potential for
massive data destruction, this option MUST BE SPECIFIED TWICE to take effect and will
error out if it is only specified once.
Using the -C or --chunk-size option to override I/O chunk size can increase performance on
rotating storage media by reducing "head thrashing," reading larger amounts of data
sequentially from each file. This tunable size can have bad side effects; the default size
maximizes algorithmic performance without regard to the I/O characteristics of any given
device and uses a modest amount of memory, but other values may greatly increase memory
usage or incur a lot more system call overhead. Try several different values to see how
they affect performance for your hardware and data set. This option does not affect match
results in any way, so even if it slows down the file matching process it will not hurt
anything.
REPORTING BUGS
Send bug reports to jody@jodybruchon.com or use the issue tracker at:
http://github.com/jbruchon/jdupes/issues
SUPPORTING DEVELOPMENT
If you find this software useful, please consider financially supporting its development
through the author's home page:
https://www.jodybruchon.com/
AUTHOR
jdupes is created and maintained by Jody Bruchon <jody@jodybruchon.com> and was forked
from fdupes 1.51 by Adrian Lopez <adrian2@caribe.net>
LICENSE
The MIT License (MIT)
Copyright (C) 2015-2021 Jody Lee Bruchon and contributors Forked from fdupes 1.51,
Copyright (C) 1999-2014 Adrian Lopez and contributors
Permission is hereby granted, free of charge, to any person obtaining a copy of this
software and associated documentation files (the "Software"), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge,
publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons
to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or
substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE
FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.
JDUPES(1)