Ubuntu Manpage: jtreg - Regression Test Harness

Provided by: jtreg7_7.3.1+1~us2-0ubuntu1~22.04.1_all

NAME

       jtreg - Regression Test Harness

DESCRIPTION

Usage:
jtreg options... tests...

Tests can be given as files or folders containing test files, or by means of test groups. Long lists of
options and tests may be encapsulated in "at-files".

Verbose Options

These options control the amount of output written to the console while running tests

-v | --v:<value> | -verbose | --verbose:<value>
Increase the amount of output written to the console. A value, or selected combinations of values
separated by commas, may be given to select the type of output desired.

default
Three lines of output per test: start, end, status

summary
One line of output per test: status, test name

all Selected contents of JTR file for all tests (includes stdout/stderr)

pass Selected contents of JTR file for passed tests

fail Selected contents of JTR file for failed tests

error Selected contents of JTR file for errored tests

nopass Suppress output for tests that passed

time Elapsed time per action

multirun
Updates for each testsuite when tests from more than one are being executed.

-v1 Short for -verbose:summary

-va Short for -verbose:all

-ve Short for -verbose:error

-vf Short for -verbose:fail

-vp Short for -verbose:pass

-vt Short for -verbose:time

Documentation Options

Options for additional documentation

--help [words...] | -h [words...] | -help [words...] | -usage [words...]
Command line help. Give words to see help info containing those or use "-help all" to see all
available help.

-n | -relnote
Release notes

-t | -tagspec
Tag specification supported by this implementation

-version
Give information about the version of jtreg in use.

General Options

-allowSetSecurityManager | --allowSetSecurityManager:<boolean-value>
Allow agentVM tests to set a security manager. Default is "yes" if option not given or no value
given for option.

yes Allow agentVM tests to set a security manager

no Do not allow agentVM tests to set a security manager

on Allow agentVM tests to set a security manager

off Do not allow agentVM tests to set a security manager

true Allow agentVM tests to set a security manager

false Do not allow agentVM tests to set a security manager

-c | -check
Verify correctness of test descriptions. Does NOT run tests.

-conc:<factor> | -concurrency:<factor>
concurrency factor

-cygwin
(Windows only) Use Cygwin to run shell tests

-dir:<dir>
Specify a base directory for test files and directories

-e:name[=value][,name[=value]...]
Specify additional environment variables to be passed to each test. If a value is not given for a
name, the current value of the environment variable will be used. Standard environment variables,
like DISPLAY, LANG, windir, SystemRoot, etc, will automatically be given to each test, if they are
set in the current environment.

-g | -gui
Access regression extensions via the standard JavaTest harness gui

-ignore:<value>
Specify how to handle tests containing an @ignore tag.

quiet Completely ignore such tests.

error (Default.) Execute the actions up to the @ignore tag, then give an "Error" result.

run Run the test, as though the @ignore tag were not present.

-l | -listtests
List the tests that would be executed instead of executing them.

-lock:<file>
Lock file to use for tests in "exclusive access" directories when running tests in multiple
concurrent instances of jtreg.

-nativepath:<path>
Path to location of native libraries and programs needed by the tests.

-noignore
suppress the effect of any @ignore tags, allowing the test to proceed as if the @ignore tags were
not present. Deprecated: see the -ignore option.

-nr | -noreport
Do not generate a final report.

-o:<classname> | -observer:<classname>
Specifies the class to observe the progress of a test suite; the class must implement a specific
interface; contact a developer for details. For example, -o:SampleRegressionObserver

-od:<path> | -observerDir:<path> | -op:<path> | -observerPath:<path>
Specifies the pathname of a directory or .jar file in which the observer class is located. The
given pathname is simply appended to the CLASSPATH used for the tests, thus care should be taken
when naming an observer not to collide with the names of classes internal to the JavaTest harness
or the JRE. For example, put the observer class in its own named package.

-r:<directory> | -reportDir:<directory>
All report files placed here; "./JTreport" is default

-report:<value>
Configure the report generated after tests are run.

none Do not generate a report; equivalent to -noreport.

executed
Include tests executed in the latest run

files Include all tests specified by groups and paths on the command line, ignoring filters like status,
exclude lists, and keywords.

all-executed
Include all tests that have been executed in current work directory

all Include all tests that are present in the test suite, whether they have been executed

-retain | --retain:<none,lastRun,pass,fail,error,all,file-pattern>,...
Specify files to be retained after each test completes executing. If -retain is not specified or
is specified with lastRun, only the files from the last test executed will be retained, in the
test's scratch directory. For all other uses of -retain, files will be retained in a test-specific
directory in the work-directory. If -retain is specified with no argument, all files will be
retained. Otherwise, the files may be described by one or more of the following values:

none Do not retain any of the files generated by each test

lastRun
Retain files generated by the last test that was run (default)

pass Retain files generated by tests that pass

fail Retain files generated by tests that fail

error Retain files generated by tests that caused an error

all Retain all files generated by each test

file-pattern
Retain files that match a specific filename. The name may contain '*' to match any sequence of
characters. For example, result.* or *.err.

-ro | -reportOnly
Generate report for previously executed tests. This does not re-run any tests. A work directory
containing the results of the executed tests must be provided. The default location is "./JTwork".
To specify an alternate directory, use -workDir.

-show:[<section-name>/]<stream-name>
Show the contents of a stream in a specific section or in all sections of the results file for a
test. The content is shown as originally written to the stream: that is, without the escape
encoding used in the .jtr file. If no section name is given, the output for the named stream in
all sections is shown. For example, -show:rerun -show:main/System.out

-showGroups
Show the expansion (to files and directories) of the groups given on the command line. To see the
expansion of all the groups in a test suite, specify the name of the test suite.

-startHttpd
Start the http server to view test results

-ttf:<classname> | -testThreadFactory:<classname>
Specifies the class to create thread factory for test execution. The class should implement the
java.util.concurrent.ThreadFactory interface.

-ttfp:<path> | -testThreadFactoryPath:<path>
Specifies classspath for custom test thread factory implementation. The classes from this
classpath are loaded by tested JDK only using URLClassLoader.

-w:<directory> | -workDir:<directory>
Location for .class files, .jtr files, etc. "./JTwork" is default

-wsl (Windows only) Use the Windows Subsystem for Linux (WSL) to run shell tests

-xml | --xml:verify
Create ant/junit xml files into the workDir. Optionally verify if the file is well-formed.

Timeout Options

These options control the behavior when tests run longer than their specified timeout value.

-th:<classname> | -timeoutHandler:<classname>
Specifies the class to handle timeouts. The class must extend
com.sun.javatest.regtest.TimeoutHandler. For example, -th:MyHandler

-thd:<path> | -timeoutHandlerDir:<path>
Specifies the pathname of a directory or .jar file in which the timeout handler class is located.
The given pathname is simply appended to the CLASSPATH used for the tests, thus care should be
taken when naming a timeout handler not to collide with the names of classes internal to the
JavaTest harness or the JRE. For example, put the timeout handler class in its own named package.

-thtimeout:<#seconds> | -timeoutHandlerTimeout:<#seconds>
Specifies execution time limitation for the timeout handler. If the timeout handler does not
finish its actions within the specified period of time, it will be interrupted. Non-positive
values mean no limitation. The default value is 5 minutes (300 seconds).

-timeout:<number> | -timeoutFactor:<number>
A scaling factor to extend the default timeout of all tests. Typically used when running tests on
slow systems or systems with slow file systems.

-tl:<#seconds> | -timelimit:<#seconds>
Do not run tests which specify a timeout longer than a given value. The comparison is done against
any values specified in the test, before any timeout factor is applied.

Agent Pool Options

Options to configure the size of the pool of VMs used to execute tests in agent mode.

--max-pool-size <number>
The maximum number of VMs to keep available in the agent pool. The default is either 2x the
concurrency.

--pool-idle-timeout <number>
The time, in seconds, before an idle VM in the pool is automatically closed.

Test Selection Options

These options can be used to refine the set of tests to be executed.

-a | -automatic | -automagic
Any test with /manual will not be run

-bug:<bugid>
Run only those tests which apply to the given bugid.

-exclude:<file> | -Xexclude:<file>
Provide a file specifying tests that should not be run

-k:<keywordExpr> | -keywords:<keywordExpr>
A keyword boolean expression for test selection. The expression can contain keyword names,
combined with & (and), | (or), ! (not) and parentheses.

-m | -manual
Only tests with /manual will be run

-match:<file>
Provide a file specifying tests that can be run (inverse of -exclude)

-noshell
Any tests which contain shell actions will not be run

-shell Only tests which contain shell actions will be run

-status:<value>,...
Select tests according to their result in an earlier run. The value can be one or more of the
following values, separated by commas.

pass Tests that passed

fail Tests that failed

notRun Tests that have not been run

error Tests that could not be run because of errors, or tests that were ignored

Test Mode Options

Each test consists of a series of steps, called actions. The jtreg harness provides different
modes, which determine the JVM to use to execute each action. The default is to run each action in
a new JVM.

-avm | -agentvm | -s | -svm | -samevm
Execute each action using a pool of reusable JVMs, except when an action specifies otherwise. It
provides good performance, and reasonable isolation between actions: if a JVM can be reset to a
standard state after it has been used, it will be returned to the pool for reuse; otherwise, it
will be discarded and replaced if and when necessary. This mode is generally recommended for all
use. The JDK to use can be specified with -testjdk or -jdk, except for @compile actions, which
use -compilejdk or -jdk. If values are not provided, the environment variable JAVA_HOME is used.

-ovm | -othervm
Execute every action in a new JVM. This is the default. It provides the maximum isolation between
actions, at a significant cost in performance. The JDK to use can be specified with -testjdk or
-jdk, except for @compile actions, which use -compilejdk or -jdk. If values are not provided, the
environment variable JAVA_HOME is used.

JDK-related Options

By default, tests will be run using the default JVM in the test JDK. You can pass all applicable
JVM options via using -vmoption; in addition, many common JVM options are also supported directly.
For full details of any option, consult the documentation for that version of the JDK, or try
using "java -help" or "java -X". If an option is not applicable to a particular platform or JDK
release, it will be rejected.

--add-modules <module>(,<module>)*
root modules to resolve in addition to the initial module

-agentlib:<libname><[=<options>]
Load native agent library

-agentpath:<pathname><[=<options>]
Load native agent library by full pathname

-compilejdk:<java.home>
Compile all tests using specified JDK. If not specified, tests are compiled with the JDK used to
run the tests. See also -jdk. For example, -jdk:/usr/local/java/jdk1.5/solaris-sparc

-cpa:<path> | -classpathappend:<path>
Append the provided classPath to the CLASSPATH of every test. This is designed to be used
primarily for tests which require non-core JDK functionality. For example, to test Swing, which is
not part of core JDK1.1, the following addition to the CLASSPATH would be necessary:
-cpa:/usr/local/java/swing-1.0.3/swingall.jar

-D<name>=<value>
Define a system property

-debug:<option>...
Use this to specify VM options to attach a debugger to a VM running a test. It is similar to
-vmoptions except that it is not used when starting VMs used to query the properties of that VM.
Any timeout for a test is automatically disabled when this option is used. See also -javaoptions
and -vmoptions.

-enableassertions | --enableassertions:* | -ea | --ea:* | -disableassertions

| --disableassertions:* | -da | --da:*
Enable or disable assertions

-enablesystemassertions | -esa | -disablesystemassertions | -dsa
Enable or disable system assertions

-javaagent:<jarpath><[=<options>]
Load Java programming language agent

-javacoption:<option>
Additional compiler option. You can give this option multiple times. Any embedded filenames must
be given with absolute paths.

-javacoptions:<option>...
Additional compiler options. You can give this option multiple times, or give many values
together, separated by spaces. If you give multiple values, you may need to enclose them in
quotes, depending on the shell you use. Any embedded filenames must be given with absolute paths.
Warning: do not use this form if any of the options has an argument such as a filename that might
contain spaces. In that case, use one or more -javacoption options instead.

-javaoption:<option>
Additional java option for running test classes. You can give this option multiple times. Any
embedded filenames must be given with absolute paths. See also -vmoption.

-javaoptions:<option>...
Additional java options for running test classes. You can give this option multiple times, or give
many values together, separated by spaces. If you give multiple values, you may need to enclose
them in quotes, depending on the shell you use. Any embedded filenames must be given with absolute
paths. Warning: do not use this form if any of the options has an argument such as a filename that
might contain spaces. In that case, use one or more -javaoption options instead. See also
-vmoptions.

-jdk:<java.home> | -testjdk:<java.home>
Run all tests using specified JDK. For example, -jdk:/usr/local/java/jdk1.5/solaris-sparc

-jit Enable the JIT for the tests. The JIT is turned on by default.

--limit-modules <module>(,<module>)*
limit the universe of observable modules

-nojit Disable the JIT for the tests.

--patch-module <module>=<path>
Specify classes to override module classes

-vmoption:<option>
Any other VM option. You can give this option multiple times. Any embedded filenames must be given
with absolute paths. This option will be used when compiling and running classes. See also
-javaoption.

-vmoptions:<option>...
Any other VM options. You can give this option multiple times, or give many values together,
separated by spaces. If you give multiple values, you may need to enclose them in quotes,
depending on the shell you use. Any embedded filenames must be given with absolute paths. Warning:
do not use this form if any of the options has an argument such as a filename that might contain
spaces. In that case, use one or more -vmption options instead. This option will be used when
compiling and running classes. See also -javaoptions.

-X* Non-standard VM Options.

-Xbootclasspath:<path>
Set search path for bootstrap classes and resources

-Xbootclasspath/a:<path>
Append to end of bootstrap class path

-Xbootclasspath/p:<path>
Prepend in front of bootstrap class path

-Xint* | -Xmixed* | -Xcomp*
Non-standard VM Options

-XX* | -Xms* | -Xmx*
Non-standard VM Options

Tests Specifying collections of tests.

at-files
Long lists of options and tests may be encapsulated in "at-files". Place the options and/or tests
in a file and specify the name of the file on the command line with @file. Options or tests that
include white space should be enclosed within either single or double quote characters. Comments
may be included in the file by prefixing them with '#'. To specify an option beginning with '@' on
the command line, use "@@" to avoid @file expansion.

Tests Specifying collections of tests.

Groups A test suite may define named groups of tests. To specify the name of a group of tests on the
command line, use test-suite-dir:group-name, where test-suite-dir is a path to the root directory
of the test suite (that is, the directory containing the TEST.ROOT file), and where group-name is
the name of the group of tests defined in the test suite. If test-suite-dir is omitted it defaults
to the value of the -dir option, if given, or to the current directory otherwise. (Note: on
Windows, to avoid confusion with absolute path names including a drive specifier, the
test-suite-dir must not be specified with a relative path consisting of a single letter.)

Groups are defined in a test suite using one or more
Java properties files. The names of these files must be listed in the "groups" entry in TEST.ROOT.
If the filename is enclosed in square brackets, no error message will be given if the file cannot
be found. Within the property files, each entry specifies items to be included or excluded from
the group. To include a test or directory of tests, simply specify the name of the test or
directory. To exclude a test or directory of tests, use '-' followed by the name of the test or
directory. To include the contents of another group, use ':' followed by the name of the group.
There must be no spaces between the "-" or ":" and the name that follows.

Summary
The following kinds of arguments can be used to specify tests to be executed.In these examples,
square brackets are used to indicate optional parts.

directory
All tests found in and under the given directory.

file[#id][?string]
Either all tests in the given file if no id is given, or the specified test if an id is given. A
file contains multiple tests if there are multiple test descriptions, in separate comment blocks.
If '?string' is specified, the string will be passed to the test so that it may filter the parts
of the test to be executed. The string will typically be the name of a method to be executed. If
conflicting values for the string are given for a specific test, the last one given will be used.

[path]:group-name
A group of tests, as defined in the TEST.groups file in the testsuite root directory. If given,
path specifies the testsuite root directory. If not given, it defaults to the one enclosing the
current directory.

@file A file containing values to be treated as if on the command-line.

COPYRIGHT

       Copyright  ©  1999,  2022,  Oracle and/or its affiliates. All rights reserved.  Use is subject to license
       terms.

       Installed in /build/jtreg7-5yhgO5/jtreg7-7.3.1+1~us2/build/images/jtreg/lib/jtreg.jar Running on platform
       version   11.0.22   from   /usr/lib/jvm/java-11-openjdk-amd64.    Built  with  Java(TM)  2  SDK,  Version
       11.0.22+7-post-Ubuntu-0u on Wed, 14 Feb 2024 18:17:58 +1300.
       Copyright © 1999, 2022, Oracle and/or its affiliates. All rights reserved.  Use  is  subject  to  license
       terms.   JT  Harness,  version  6.0  ea  b22  (January 03, 1970) Java Assembler Tools, version 7.0 ea b09
       (December 27, 1969) TestNG: testng.jar, guice.jar, jcommander.jar, slf4j-simple.jar, slf4j-api.jar TestNG
       (testng.jar):  version  7.5  TestNG  (guice.jar):  version 4.2.3 TestNG (jcommander.jar): version unknown
       TestNG   (slf4j-simple.jar):   version   1.7.32   TestNG   (slf4j-api.jar):   version    1.7.32    JUnit:
       junit-platform-console-standalone.jar JUnit: version unknown

NAME

DESCRIPTION

COPYRIGHT

SEE ALSO