Provided by: maildirsync_1.2-4_all 
NAME
maildirsync - Online synchronizer for Maildir-format mailboxes
SYNOPSIS
maildirsync.pl [ --recursive ] [ --backup path ] [ --backup-tree ] \
[ --bzip2=bzip2 ] [ --gzip=gzip ] [ --maildirsync=maildirsync ] \
[ --rsh=ssh ] [ --verbose ] [ --alg=md5 ] [ --delete-before ] \
[ --exclude=^/Folder1 ] [ --exclude=^/Fold.*er2 ] \
[ --exclude-source=^/Folder3 ] [ --exclude-target=^/Folder4 ] \
[ --rename="s/SourceFolder/TargetFolder/" ] \
[ --destination=win|lin ] \
[ -r ] [ -b path ] [ -B ] [ -R ssh ] [ -v ] [ -a ] [ -d ] \
source dest state_file.bz2
A simple two-way synchronization:
maildirsync.pl -rvv -a md5 desktop:Maildir Maildir lib/sync_desk_note.bz2
maildirsync.pl -rvv -a md5 Maildir desktop:Maildir lib/sync_note_desk.bz2
DESCRIPTION
maildirsync is a utility for online Maildir-synchronization. It is designed to be used on
live maildir folders, be fail-safe and optimized for minimal bandwidth.
HOW IT WORKS
If you call the program once, it will propagate the changes from the source side to the
target side. Two-way synchronization requires two state-file and two call for the program.
This propagation is basically two different operations from the source side:
• New file is created or an existing file is moved to a new location (e.g flags are
changed).
• A file is deleted in the source side. (Will be deleted in the target side also).
At the first phase, the source side reads the state file (which stores the state of the
last synchronization) and compares it to the current state. It collects the changes and
sends them the target side.
The target side checks every file, which is marked new in the source file, and decides if:
• The file needs to be downloaded fully
• Its header needs to be downloaded
• We have this file already, so we need no data.
After it decides, it sends back the requests for new files.
Then the source side will send the files to the target side, which stores them into the
Maildir structure.
After the send operation is completed, both operation agrees upon the commit operation.
Then the source side saves the new state into the state file.
Note if we forget saving the state, or the program exits before it, the operation can be
restarted without data loss and inconsistency, because all operations can be redone
without errors.
REMOTE OPERATION
Maildir can be used in remote mode, so it can synchronize Maildir folders between
computers. If you want to use it this way, you have to provide the host name before either
the source or the target, like:
maildirsync.pl ... desktop:Maildir Maildir lib/maildirsync.bz2
or
maildirsync.pl ... Maildir desktop:Maildir lib/maildirsync.bz2
In remote mode, the target side must have maildirsync installed also. (See the
--maildirsync command-line argument).
The state-file must be in the same system as the source, so the source file in the first
example is searched in the "desktop" computer, and in the local computer in the second
example.
At least source or the destination must be local, so you cannot sync maildirs on two
different remote hosts.
COMMAND-LINE SWITCHES
Some command line switches has two form: a short form and a longer form. In the short
form, the switches can be grouped, like: -vvvr. Short options with parameters also can be
grouped, but the parameter must be the following command-line argument, like:
maildirsync.pl -rvvvbR Maildir/Trash/cur ssh ...
It is the same as:
maildirsync.pl --recursive --verbose --verbose --verbose --backup \
Maildir/Trash/cur --rsh ssh ...
Long options can use '=' for assigning the parameter, or they can use the syntax above.
Let's see what switches we have:
--recursive, -r
Process the base folder as the recursive collection of Maildir folders.
--backup dir, -b dir
The deleted files are backed up to the specified directory (this directory does not
needs to be a maildir folder). The directory is relative to the start-up directory,
not the target base folder! The directory is created if it does not exists.
--backup-tree, -B
This option is only useful when used in conjunction with the --backup option. If set,
deleted messages are moved to a Maildir folders tree inside the backup directory with
the same relative path. The resulting backup directory can be used with any Maildir-
capable application (MUAs, MTAs, etc.).
--bzip2 bzip2
Path to the bzip2 utility (used only when the state file has .bz2 extension). Note
that using bzip2 is turned out to be quite unstable, it sometimes leave the state file
empty or corrupted.
--gzip gzip
Path to the gzip utility (used only when the state file has .gz extension).
--maildirsync maildirsync.pl
Path to the maildirsync utility on the remote machine (if we use maildirsync in remote
mode).
--rsh ssh
Path to the utility, which can be used to connect to the remote side. It defaults to
"ssh". Note that the protocol, which is used in remote mode, does not contain
compression, but the data can be compressed well, so I suggest using the ssh
compression for this purpose.
--destination
If it is provided, then it does transformation in the file names. The transformations
are the following:
• win: Converts ":" to ":" (since windows don't allow colon in the filename).
• lin: Converts ":" to ":".
--verbose, -v
Adds more verbosity to the operation. There are currently 6 different verbosity level:
0 No information at all.
1 Main operations.
2 Files sent, received, deleted, moved, md5 calculations.
3 Directories read and created.
4 Options + command echo.
5 Misc info about file transfer.
--alg md5, -a md5
Selects the synchronization algorithm. Currently two algorithms are provided:
id (default)
The messages are synchronized only by the ID of a message (the ID can be
determined by the message filename).
md5 This method is recommended for low bandwidth operations. This mode can reduce the
file transfers by checking the message moves on the target side. This mode
requires an MD5 sum on the body of the message, so the first use of this mode can
be quite time-consuming on both sides.
For more information about the algorithms, read the chapter about that.
--delete-before, -d
Normally the delete operations on the target side is done after the transfers. Use
this switch if you don't have too much space on your hard disk. Note that using this
switch can reduce the chance of detecting the message moves.
--exclude, -x
Excludes a directory regexp from the transfer and removes it from the state file. This
option can be used more than once to specify more than one directories. Note, that the
directory, which is matched against these regexps are the relative path of the folders
with a leading '/', so if you want to exclude your Trash folder in the root of your
synchronization, then you have to use the following form:
--exclude=^/Trash
The excluded paths are used in either source or the target side also. So if you
exclude a very large directory, you will notice speedup in the source and target side
also.
Note that this regexp is matched for every directory that is read from the filesystem,
and every directory what is found in the state file. So if you provide the exclude
pattern as ^/Trash$, then it will skip the Trash directory when traversing the
directory structure, but it WON'T skip files from the Trash/cur directory when reading
from the state file! So be careful if you use the exclude pattern with existing state
file!
--exclude-source, --exclude-target
These parameters can be used to exclude files only from one side of the
synchronization. Can be useful with the rename options (below).
--rename
Can be used to rename files when transferred from one side to another. A perl
expression is the parameter for this.
If you use this option, use it with care, because you have to provide exactly the
opposite of the name-transformation if you sync to the other side, for example:
In one side, you can use (A to B):
--rename="s{^/Saved/}{/ToBeSaved/}" \
--exclude-target="^/Saved/" \
In the other side, you can use (B to A):
--exclude-source="^/Saved/" \
--rename="s{^/ToBeSaved/}{/Saved/}" \
In this case, the Saved folder in the A side will be synchronized with the ToBeSaved
folder in the B side, and the Saved folder in the B side will be excluded from the
synchronization. This scenario can be used when you don't want to store your emails in
the server, but you want to use the "Saved" folder in the server too. In this case,
the emails will be downloaded from the server (A side) to your laptop (B side), then
you can move them to the Saved folder in B with a script. If this is done, then you
can resynchronize, then the saved files will disappear from the server also.
ALGORITHMS
Currently the program has two algorithms, which can be used for synchronization.
id (default)
This algorithm is based on the message-id-s of the messages. It assumes that a
message-id exists only once in both repositories with the same id. The id can be
determined form the filename.
With this algorithm, you can trace the flag changes or the deletion of a message and
these changes can be propagated to the other side also. It also handles if a message
is copied from the "new" directory to the "cur" directory without retransmit the files
over the network.
This algorithm is recommended if you want a simple and quite fast operation, and if
you have a not-so-slow internet connection.
md5 This algorithm does further calculations. It stores the size of the header and the md5
sum of the message body for each message besides the data that the "id" algorithm
stores.
By using this algorithm, you can track the copies and moves of a message, so you don't
need to retransmit large files if you move them to a new folder.
If you copy or move a message from one folder to another, the header is sometimes
changed by the mail-reader program. This is why we cannot simply calculate the MD5 sum
of the whole message. A new message in a folder will have a new identifier also, so it
doesn't violate the law that a message-id is unique.
When you copy or move a message from your INBOX to your "Save" folder (for example),
the new message is analyzed in the source side, header-size and md5 sum is calculated
on the new message, and from the md5-hash, the source side can tell the target side
what messages has the same hash-value, so the target side can copy the body from the
other message. If the target side has successfully copied the body from one of those
provided messages, then only the header needs to be transmitted across the network. If
the target-side did not find the messages, then it requests for the body also.
ONLINE OPERATION
Online operation means that the software can be used in an online mailbox also. It assumes
that the Maildir folder can be changed when the program is working, so it tries to be as
fail-safe as can be.
Every new file is opened in the "tmp" directory, and moved to the target place only when
the file is fully downloaded.
This mode of operation was the first priority, because this feature is missing from most
synchronizer software, including my "drsync" utility also.
SPEED
I am using this program to synchronize my Mailboxes. I have 9700 emails in my mailbox and
the state file (bzipped) is 283K.
The first time of a two-way synchronization between a P166 server and a PIII/1200 notebook
over a Cable network, where the starting position is an already synchronized directory,
tooks about 10 minutes. This time is used for md5-calculation and message-id propagation.
The next two-way run tooks about 40 seconds.
These things are measured in Debian GNU/Linux testing/unstable operating system (08 Oct
2002).
These are only the overhead of the software, not the real transfer. If you got a very big
email, it needs to be transferred at least one time on the network. But if you have it in
both sides, then it does not require any more transfer if you save it to different
folders.
TODO
I am currently happy with this feature set, but if I have time, I will implement these
features into the software. Anyway if you have time and willingness, I accept patches
also:
• Message-size limit. By limiting the maximum transmitted message, you can effectively
use this software if you have very low bandwidth.
• Config-file and cron-safe operation.
COPYRIGHT
Copyright (c) 2000-2010 Szabo, Balazs (dLux)
All rights reserved. This program is free software; you can redistribute it and/or modify
it under the same terms as Perl itself.
AUTHOR
dLux (Szabo, Balazs) <dlux@dlux.hu>