Provided by: sumo_1.12.0+dfsg1-1_amd64 
NAME
Eclipse - Import O/D-matrices and trips using macroscopic traffic assignment for SUMO
SYNOPSIS
marouter [OPTION]*
DESCRIPTION
Eclipse SUMO marouter Version 1.12.0
Copyright (C) 2001-2022 German Aerospace Center (DLR) and others;
https://sumo.dlr.de
Import O/D-matrices for macroscopic traffic assignment to generate SUMO routes
Configuration Options:
-c, --configuration-file FILE
Loads the named config on startup
-C, --save-configuration FILE
Saves current configuration into FILE
--save-template FILE
Saves a configuration template (empty) into FILE
--save-schema FILE
Saves the configuration schema into FILE
--save-commented
Adds comments to saved template, configuration, or schema
Input Options:
-n, --net-file FILE
Use FILE as SUMO-network to route on
-d, --additional-files FILE
Read additional network data (districts, bus stops) from FILE
-m, --od-matrix-files FILE
Loads O/D-files from FILE(s)
--od-amitran-files FILE
Loads O/D-matrix in Amitran format from FILE(s)
-z, --tazrelation-files FILE
Loads O/D-matrix in tazRelation format from FILE(s)
--tazrelation-attribute STR
Define data attribute for loading counts (default 'count')
-r, --route-files FILE
Read sumo-routes or trips from FILE(s)
-w, --weight-files FILE
Read network weights from FILE(s)
--lane-weight-files FILE
Read lane-based network weights from FILE(s)
-x, --weight-attribute STR
Name of the xml attribute which gives the edge weight
--weight-adaption FLOAT
The travel time influence of prior intervals
--taz-param STR[]
Parameter key(s) defining source (and sink) taz
--junction-taz
Initialize a TAZ for every junction to use attributes toJunction and fromJunction
--ignore-taz
Ignore attributes 'fromTaz' and 'toTaz'
Output Options:
-o, --output-file FILE
Write flow definitions with route distributions to FILE
--vtype-output FILE
Write used vehicle types into separate FILE
--ignore-vehicle-type
Does not save vtype information
--netload-output FILE
Writes edge loads and final costs into FILE
--all-pairs-output FILE
Writes complete distance matrix into FILE
--write-license
Include license info into every output file
--output-prefix STR
Prefix which is applied to all output files. The special string 'TIME' is replaced
by the current time.
--precision INT
Defines the number of digits after the comma for floating point output
--precision.geo INT
Defines the number of digits after the comma for lon,lat output
-H, --human-readable-time
Write time values as hour:minute:second or day:hour:minute:second rather than
seconds
--exit-times
Write exit times (weights) for each edge
Processing Options:
--aggregation-interval TIME
Defines the time interval when aggregating single vehicle input; Defaults to one
hour
--max-alternatives INT
Prune the number of alternatives to INT
--capacities.default
Ignore edge priorities when calculating capacities and restraints
--weights.interpolate
Interpolate edge weights at interval boundaries
--weights.expand
Expand weights behind the simulation's end
--weights.priority-factor FLOAT
Consider edge priorities in addition to travel times, weighted by factor
--routing-algorithm STR
Select among routing algorithms ['dijkstra', 'astar', 'CH', 'CHWrapper']
--bulk-routing.vtypes
Aggregate routing queries with the same origin for different vehicle types
--routing-threads INT
The number of parallel execution threads used for routing
--weight-period TIME
Aggregation period for the given weight files; triggers rebuilding of Contraction
Hierarchy
-s, --scale FLOAT
Scales the loaded flows by FLOAT
--vtype STR
Defines the name of the vehicle type to use
--prefix STR
Defines the prefix for vehicle flow names
--timeline STR[]
Uses STR[] as a timeline definition
--timeline.day-in-hours
Uses STR as a 24h-timeline definition
--additive-traffic
Keep traffic flows of all time slots in the net
--assignment-method STR
Choose a assignment method: incremental, UE or SUE
--tolerance FLOAT
Use FLOAT as tolerance when checking for SUE stability
--left-turn-penalty FLOAT
Use left-turn penalty FLOAT to calculate link travel time when searching routes
--paths INT
Use INTEGER as the number of paths needed to be searched for each OD pair at each
iteration
--paths.penalty FLOAT
Penalize existing routes with FLOAT to find secondary routes
--upperbound FLOAT
Use FLOAT as the upper bound to determine auxiliary link cost
--lowerbound FLOAT
Use FLOAT as the lower bound to determine auxiliary link cost
-i, --max-iterations INT
maximal number of iterations for new route searching in incremental and stochastic
user assignment
--max-inner-iterations INT
maximal number of inner iterations for user equilibrium calculation in the
stochastic user assignment
--route-choice-method STR
Choose a route choice method: gawron, logit, or lohse
--gawron.beta FLOAT
Use FLOAT as Gawron's beta
--gawron.a FLOAT
Use FLOAT as Gawron's a
--keep-all-routes
Save routes with near zero probability
--skip-new-routes
Only reuse routes from input, do not calculate new ones
--logit.beta FLOAT
Use FLOAT as (c-)logit's beta for the commonality factor
--logit.gamma FLOAT
Use FLOAT as (c-)logit's gamma for the commonality factor
--logit.theta FLOAT
Use FLOAT as (c-)logit's theta
Defaults Options:
--flow-output.departlane STR
Assigns a default depart lane
--flow-output.departpos STR
Assigns a default depart position
--flow-output.departspeed STR
Assigns a default depart speed
--flow-output.arrivallane STR
Assigns a default arrival lane
--flow-output.arrivalpos STR
Assigns a default arrival position
--flow-output.arrivalspeed STR
Assigns a default arrival speed
Time Options:
-b, --begin TIME
Defines the begin time; Previous trips will be discarded
-e, --end TIME
Defines the end time; Later trips will be discarded; Defaults to the maximum time
that SUMO can represent
Report Options:
-v, --verbose
Switches to verbose output
--print-options
Prints option values before processing
-?, --help
Prints this screen or selected topics
-V, --version
Prints the current version
-X, --xml-validation STR
Set schema validation scheme of XML inputs ("never", "auto" or "always")
--xml-validation.net STR
Set schema validation scheme of SUMO network inputs ("never", "auto" or "always")
--xml-validation.routes STR
Set schema validation scheme of SUMO route inputs ("never", "auto" or "always")
-W, --no-warnings
Disables output of warnings
--aggregate-warnings INT
Aggregate warnings of the same type whenever more than INT occur
-l, --log FILE
Writes all messages to FILE (implies verbose)
--message-log FILE
Writes all non-error messages to FILE (implies verbose)
--error-log FILE
Writes all warnings and errors to FILE
--ignore-errors
Continue if a route could not be build
Random Number Options:
--random
Initialises the random number generator with the current system time
--seed INT
Initialises the random number generator with the given value
EXAMPLES
marouter -c <CONFIGURATION>
run routing with options from file
REPORTING BUGS
Report bugs at <https://github.com/eclipse/sumo/issues>.
Get in contact via <sumo@dlr.de>.
Build features: Linux-4.15.0-167-generic x86_64 GNU 11.2.0 None Proj GUI SWIG GDAL
FFmpeg OSG GL2PS Eigen
Copyright (C) 2001-2022 German Aerospace Center (DLR) and others;
https://sumo.dlr.de
Eclipse SUMO marouter Version 1.12.0 is part of SUMO.
This program and the accompanying materials are made available under the terms of the
Eclipse Public License v2.0 which accompanies this distribution, and is available at
http://www.eclipse.org/legal/epl-v20.html
This program may also be made available under the following Secondary
Licenses when the conditions for such availability set forth in the Eclipse
Public License 2.0 are satisfied: GNU General Public License, version 2 or later which is
available at https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html
SPDX-License-Identifier: EPL-2.0 OR GPL-2.0-or-later