Provided by: dist_3.5-236-1_all 
NAME
metaconfig - a Configure script generator
SYNOPSIS
metaconfig [ -dhkmostvwGMV ] [ -L dir ]
DESCRIPTION
Metaconfig is a program that generates Configure scripts. If you don't know what a
Configure script is, please skip to the TUTORIAL section of this manual page. If you want
a full (formal) description of the way to use metaconfig and its units, please look at the
REFERENCE section. The following is a quick introduction and reference for knowledgeable
users.
Metaconfig operates from set of units which define everything that metaconfig knows about
portability. Each unit is self-contained, and does not have to be registered anywhere
other than by inclusion in either the public U directory or your private U directory. If
the dist package (of which metaconfig is a part) is installed in LIB, then the public U
directory is LIB/dist/mcon/U. On this machine, the LIB directory is /usr/share/dist. Your
private U directory, if you have one, is in the top level directory of your package.
Before you can run metaconfig you must do a several things:
• Create a .package file in the package's top level directory by running packinit.
This program will ask you about your package and remember what you tell it so that
all the dist programs can be smart.
• Consult the Glossary (in LIB/dist/mcon) and write your shell scripts and C programs
in terms of the symbols that metaconfig knows how to define. You don't need to tell
metaconfig which symbols you used, since metaconfig will figure that out for you.
• Generate any .SH scripts needed to write Makefiles or shell scripts that will depend
on values defined by Configure. There is a program called makeSH that will help you
convert a plain script into a script.SH template; some editing will still need to be
performed on the resulting .SH file to move the variable configuration part in the
top part of the script (see inline comments generated by makeSH within your .SH
file).
• Create a MANIFEST.new file in your top level directory that lists all the files in
your package. This file will remain private and will not be part of the final
distribution. (As a convenience, the MANIFEST file will be used by metaconfig if
there is no MANIFEST.new file yet.) The filename should be the first field on each
line. After some whitespace you can add a short comment describing your file. Only
source files should be listed in there. The special file patchlevel.h (which is
handled and maintained by the patching tools -- see pat(1)) should be part of the
MANIFEST.new file, but may be silently ignored by some tools. As a rule of thumb,
only files maintained by RCS should be listed in there, the patchlevel.h file being
one important exception.
• Optionally, you may wish to create a MANIFEST file, which will be an exported version
of your MANIFEST.new. That file must be made part of the release, i.e. listed in both
your MANIFEST.new and MANIFEST itself. One of the metaconfig units knows about this
file and will force Configure to perform a release check, ensuring all the files
listed there are part of the distribution. The MANIFEST and MANIFEST.new files should
be distinct, not links.
• Copy any .U files that you want to modify to your private U directory. Any .U files
in your private U directory will be used in preference to the one in the public U
directory. For example, one way to force inclusion of any unit is to copy the End.U
file to your .U directory and add the name of the unit you want as a dependency on
the end of the ?MAKE: line. Certain units can ONLY be forced in this way, namely
those of the form Warn_*.U and Chk_*.U. You can also customize certain default
Configure variables by copying Myinit.U to your package's private U directory and
setting the variables in that unit.
Now you are ready to run metaconfig. That will create a Configure file, and optionally a
config_h.SH file (if your sources make any use of C symbols). The generated files will
automatically be added to your MANIFEST.new if necessary. Do not forget to update your
MANIFEST file though.
In order to create new units, do the following:
• Copy a similar unit to a new .U file. The name you choose should be the name of a
variable generated by the unit, although this is only a convenience for you, not a
requirement. It should be 12 or less characters to prevent filename chopping.
Actually, it should probably be 10 or less so that those who want to use RCS can have
a .U,v on the end without chopping. Metaconfig uses the case of the first letter to
determine if any variable is actually produced by this unit, so don't Capitalize your
unit name if it is supposed to produce a shell variable.
• Edit the new .U file to do what you want. The first ?MAKE: line indicates the
dependencies; before the final list colon all the variables this unit defines, and
after the final colon all the variables (or other units) on which this unit depends.
It is very important that these lists be accurate. If a dependency is optional and a
default value can be used, you should prefix the dependency with a '+' sign. The
corresponding unit will not be loaded to compute the symbol, unless really required
by another unit.
• To the extent possible, parameterize your unit based on shell variable defined on
?INIT: lines. This will move the variable definitions up to the Init.U unit, where
they can be overridden by definitions in Myinit.U, which is included after Init.U.
• Add the definition of any C symbols desired as ?H: lines. A line beginning with
?H:?%<: in the .U file will be added to the eventual config.h file if and only if
metaconfig decides that this unit is needed. The %< stands for the unit's name,
which happens to be the name of the file too (without .U) if you followed the
convention. Always put a comment on each ?H: line in case one of the variable
substitutions earlier on the line starts a comment without finishing it. Any shell
variable starting with d_ may do this, so beware. If you ommit the ?%<:, then
metaconfig will try to intuit the symbol whose definition is needed prior any
inclusion in config.h.
• Add glossary definitions as ?S: lines for shell variables and ?C: lines for C
preprocessor variables. See a current unit for examples. It is VERY important to
start each entry with a left justified symbol name, and end each entry with a ?C:. or
?S:. line. The algorithm that translates C preprocessor symbol entries for the
Glossary into comments for config.h depends on this.
• Make sure the order of all your ? lines is right. The correct order is:
?RCS: and ?X: basically just comments
?MAKE: metaconfig dependencies
?Y: unit layout directive
?S: glossary shell definitions
?C: glossary C definitions
?H: config.h definitions
?M: confmagic.h definitions
?W: wanted symbols
?V: visible symbols
?F: files created by this unit
?T: temporary shell symbols used
?D: optional dependencies default value
?O: used to mark obsolete units
?LINT: metalint hints
?INIT: shell symbols initializations
Here is an example to show the ordering of the lines and the various formats allowed:
?RCS: $RCS-Id$
?RCS: Copyright information
?RCS: $RCS-Log$
?X:
?X: A contrived example
?X:
?MAKE:d_one two: three +four Five
?MAKE: -pick add $@ %<
?Y:DEFAULT
?S:d_one:
?S: First shell symbol, conditionally defines ONE.
?S:.
?S:two:
?S: Second shell symbol, value for TWO.
?S:.
?C:ONE:
?C: First C symbol.
?C:.
?C:TWO:
?C: Second C symbol.
?C:.
?H:#$d_one ONE /**/
?H:#define TWO "$two"
?H:#$d_one ONE_TWO "$two"
?H:.
?M:flip: HAS_FLIP
?M:#ifndef HAS_FLIP
?M:#define flip(x) flop(x)
?M:#endif
?M:.
?W:%<:one_two
?V:p_one p_two:p_three
?F:file ./ftest !tmp
?T:tmp var
?D:two='undef'
?LINT:change three
?INIT:two_init='2'
: shell code implementing the unit follows
p_one='one'
p_two='two'
p_three=""
Let me state it one more time: the above unit definition is a fake one to only show the
different possibilities. Such a unit would serve little purpose anyway... Some more
advanced features are not described here. Please refer to the REFERENCE section for more
complete information.
• Put the unit into the public or private U directory as appropriate.
• Rerun metaconfig.
• Send your unit to Raphael.Manfredi@pobox.com (Raphael Manfredi) for inclusion in
the master copy, if you think it's of general interest.
In order to add a new program to be located:
• Edit Loc.U, and add the name of the program both to the ?MAKE: line (between the
two colons) and to either loclist or trylist (depending on whether the program is
mandatory or not).
• Rerun metaconfig.
• Send your unit to me for inclusion in the master copy, if you think it's of general
interest.
Notes for writing .U files:
* Always use "rm -f" because there are systems where rm is interactive by default.
* Do not use "set -- ..." because '--' does not work with every shell. Use "set x ...;
shift".
* Do not use "unset ENV" since unset is not fully portable. Say "ENV=''" instead.
* Always use echo " " (with a space) because of Eunice systems.
* Only use test with -r, -w, -f or -d since those are the only portable switches. In
particular, avoid "test -x".
* Use only programs that came with V7, so that you know everyone has them.
* Use $contains when you want to grep conditionally, since not all greps return a
reasonable status. Be sure to redirect the output to /dev/null, by using '>/dev/null
2>&1'.
* Use "if test" rather than "if [...]" since not every sh knows the latter construct.
* Use the myread script for inputs so that they can do shell escapes and default
evaluation. The general form is
case "$grimble" in
'') dflt=452;;
*) dflt="$grimble";;
esac
rp='How many grimbles do you have?'
. ./myread
grimble="$ans"
* Use the getfile script when asking for a file pathname in order to have optional
~name expansion and sanity checks. See the Getfile.U unit for a full decription.
* Always put a
$startsh
at the top of every generated script that is going to be launched or sourced by
Configure.
* Never assume common UNIX-isms like the fact that an object file ends with a .o and
that a library name ends with .a. Use the $_o and $_a variables instead (see
Unix.U).
* When doing a compile-link-execute test, always write it like this:
$cc $ccflags $ldflags try.c -o try $libs
because some systems require that linking flags be specified before the compiled
target (with the exception of trailing linking libraries).
* Issue important messages on file descriptor #4, by using '>&4' to redirect output.
Only those messages will appear when the -s switch is given to Configure on the
command line (silent mode).
* Always try to determine whether a feature is present in the most specific way--don't
say "if bsd" when you can grep libc. There are many hybrid systems out there, and
each feature should stand or fall by itself.
* Always try to determine whether a feature is present in the most general way, so that
other packages can use your unit.
* When in doubt, set a default and ask. Don't assume anything.
* If you think the user is wrong, allow for the fact that he may be right. For
instance, he could be running Configure on a different system than he is going to use
the final product on.
Metaconfig reserves the following names in your directory, and if you use such a name it
may get clobbered or have other unforeseen effects:
.MT/*
Configure
Wanted
Obsolete
configure
config_h.SH
confmagic.h
U/*
MANIFEST.new
Additionally, Configure may clobber these names in the directory it is run in:
UU/*
config.sh
config.h
OPTIONS
The following options are recognized by metaconfig:
-d Turn on debug mode. Not really useful unless you are debugging metaconfig
itself.
-h Print help message and exit.
-k Keep temporary directory, so that you may examine the working files used by
metaconfig to build your Configure script. Useful only when debugging the
units.
-m Assume lots of memory and swap space. This will speed up symbol lookup in
source files by a significant amount of time, at the expense of memory
consumption...
-o Map obsolete symbols on new ones. Use this switch if you still have some
obsolete symbols in your source code and do not want (or cannot) remove
them for now. The obsolete symbols are otherwise ignored, although that
will give you a warning from metaconfig.
-s Turn silent mode on.
-t Trace symbols as they are found.
-v Turn verbose mode on.
-w Assume Wanted file is up-to-date. This will skip the time and memory
consuming phase of source code scanning, looking for known symbols. Use it
only when you know your source file have not changed with respect to the
pool of metaconfig symbols used.
-G Also provide a GNU configure-like front end to the generated Configure
script, to be included in the distribution as well. This is only a wrapper
around the Configure script naturally, but it lets people familiar with the
GNU tool to not be lost when facing a new distribution.
-L dir Override default library location. Normally only useful for metaconfig
maintainers to locally use the units being developed instead of the
publicly available ones. The dir specified is the one containing the units
U directory.
-M Allow production of a confmagic.h file to automagically remap some well-
known symbols to some other alternative, like bcopy() being remapped
transparently to memcpy() when not available. This option is turned on
automatically when a confmagic.h file exists in the top-level directory.
Simply remove that file if you wish to disable this option permanently.
-V Print version number and exit.
-X file When examining the source files, ignore any symbols listed in the file.
This is useful in situations where a particular unit is known not to be
needed for your package's portability targets, but your source files
nevertheless contain occurrences of words that look to metaconfig like
symbols defined in that unit. (For example, you might need the word "index"
in a source file, but not need the unit that determines whether strcpy or
index should be used.) The file can contain blank lines, comment lines
introduced with '#', and lines containing a single symbol. If this option
is not supplied, any variable in .package is honored instead.
TUTORIAL
This (long) section is an introduction to metaconfig, in which we will learn all the
basics. If you already know how to use metaconfig, you may safely skip to the next
section.
Overview
Usually when you want to get some source package to compile on a given platform you have
to edit the main Makefile (assuming there is one!), choose a C compiler, make sure you
have the proper libraries, and then fire the make command. If the package is reasonably
well written, it will compile (without a warning being an option :-). In itself, the last
sentence is a real performance, since given the variety of UNIX platforms available today
and the diversity of flavours, that means the author of the package has gone into deep
trouble to figure out the right choices given some standard trial, guessing and messing
around with system includes and types.
However, despite all his talent, the author cannot possibly know that some system has a
broken system call, or that some system structure lacks one otherwise standard field, or
simply whether a given include file exists or not. And I'm not considering the implicit
assumptions, like the type returned by the malloc() function or the presence of the
rename() system call to name a few. But that knowledge is necessary to achieve real
portability.
Now let's not abuse ourselves. Using that information requires greater skills, yet it can
lead to more portable programs since it is then written in a system-independant fashion
and relies only on the fact that some assumption is true or false on a particular system,
each assumption being unrelated with each other. That is to say, we do not say: We're on a
BSD system or we are on a USG system. That's too fuzzy anyway nowadays. No, we want to
say to the source code: this system does not have the rename() system call and malloc()
returns a (void *) value.
Metaconfig is a tool that will let you do just that, with the additional benefit of not
having to hand-edit the Makefile if all goes well. By running metaconfig, you create a
shell script named Configure. Lots of efforts have been devoted to the Configure script
internals to ensure it will run on 99% of the existing shells available as of this
writing. Configure will probe the target system, asking questions when in doubt and
gather all the answers in one single shell file, which in turn can be used to
automatically generate configured Makefiles and C include files.
There is only a limited (but quite large) set of symbols available for your shell scripts
and C programs. They are all documented in the Glossary file. All you need to do is learn
about them and start using them to address portability and configuration problems. Then,
by running metaconfig, a suitable Configure script will be generated for your package.
The Configure script is built out several units (more than 300), each unit being
responsible for defining a small number of shell and/or C symbols. Units are assembled
together at the final stage, honoring the dependency graph (one unit may need the result
of several other units which are then placed before in the script).
Symbols
Symbols are the most important thing in the metaconfig world. They are the smallest
recognized entity, usually a word, and can be granted a value at the end of the Configure
execution. For instance, the C pre-processor symbol HAS_RENAME is a metaconfig symbol that
is guranteed to be defined if, and only if, the rename() system call is present. Likewise,
the $ranlib shell variable will be set to either ':' or 'ranlib' depending on whether the
call to the ranlib program is needed to order a library file. How this works is not
important for now, what is important is to understand that those symbols are given a life
(i.e. a value) upon Configure execution.
Using symbols is relatively straightforward. In a C source file, you simply use the symbol
value, as a pre-processor directive (for instance an: #ifdef HAS_RENAME) or, if the symbol
value is a string, directly as you would use a macro in C. And in a shell file or a
Makefile, you may reference a shell symbol directly.
Actually, I'm lying, because that's not completely as magic as the previous paragraph
could sound. In a C file, you need to include the Configure-produced config.h file, and
you must wrap your shell script or Makefile in a .SH file and you may reference the shell
symbol only in the variable substitution part of that .SH file. More on this later.
Source Files
Symbols may only appear in a limited set of source files, because metaconfig will only
scan those when looking for known symbols, trying to figure out which units it will need.
You may use C symbols in C source files, i.e. files with a .c, .h, .y or .l extension, and
shell symbols are looked for only in .SH files.
In order to get the value of a symbol, a C file needs to include the special config.h
file, which is produced by Configure when C symbols are present. And .SH files are run
through a shell, producing a new file. However, in the top section of the .SH file, the
special config.sh file (also produced by running Configure) is sourced, and variable
substitutions apply. Actually, config.h is produced by running the metaconfig-produced
config_h.SH file, again using variable substitution. So we're going to look at that a
little more closely since this is the heart of the whole configuration scheme...
Variable Substitution
There is shell construct called here document which enables a command to take an input
specified within the script itself. That input is interpreted by the shell as a double-
quoted string or a single quoted string depending on the form of the here document
specification.
To specify a here document, the '<<' token is used, followed by a single identifier. From
then on, the remaining script lines form the input for the command, until the here
document is found on a line by itself. Shell substitution (including shell variable
substitutions) is done unless the identifier is surrounded by single quotes. For instance:
var='first'
tar='second'
echo "--> first here document:"
cat <<EOM
var='$var'
tar='$tar'
EOM
echo "--> second here document:"
cat <<'EOM'
echo $var
echo $tar
EOM
echo "--> end."
will produce, when run through a shell:
--> first here document:
var='first'
tar='second'
--> second here document:
echo $var
echo $tar
--> end.
The first here document has its content interpreted whilst the second one is output as-is.
Both are useful in a .SH script, as we are about to see.
Using .SH Scripts
A .SH script is usually produced by running the MakeSH script other an existing file,
transforming file into a file.SH. Let's take a single example. Here is a little script
(let's call it intsize) which prints a single message, the size of the int datatype in C.
Unfortunately, it has the value hardwired in it, thusly:
#!/bin/sh
intsize='4'
echo "On this machine, the int type is $intsize bytes"
Let's run makeSH on it by typing 'makeSH intsize'. We get a single intsize.SH file that
looks like this:
case $CONFIG in
'')
if test -f config.sh; then TOP=.;
elif test -f ../config.sh; then TOP=..;
elif test -f ../../config.sh; then TOP=../..;
elif test -f ../../../config.sh; then TOP=../../..;
elif test -f ../../../../config.sh; then TOP=../../../..;
else
echo "Can't find config.sh."; exit 1
fi
. $TOP/config.sh
;;
esac
: This forces SH files to create target in same directory as SH file.
: This is so that make depend always knows where to find SH derivatives.
case "$0" in
*/*) cd `expr X$0 : 'X\(.*\)/'` ;;
esac
echo "Extracting intsize (with variable substitutions)"
: This section of the file will have variable substitutions done on it.
: Move anything that needs config subs from !NO!SUBS! section to !GROK!THIS!.
: Protect any dollar signs and backticks that you do not want interpreted
: by putting a backslash in front. You may delete these comments.
$spitshell >intsize <<!GROK!THIS!
$startsh
!GROK!THIS!
: In the following dollars and backticks do not need the extra backslash.
$spitshell >>intsize <<'!NO!SUBS!'
intsize='4'
echo "On this machine, the int type is $intsize bytes"
!NO!SUBS!
chmod 755 intsize
$eunicefix intsize
The first part of this script (in the case statement) is trying to locate the config.sh
file, in order to source it. The $CONFIG variable is false by default, by true when
config.sh has been sourced already (which would be the case if this file was executed from
within Configure itself, but let's not confuse the issue here).
Once the config.sh file has been sources, all the shell symbols defined by Configure are
set. We know reach a second case statement, used to change the current directory should a
path be used to reach this program (for instance if we said 'sh ../scripts/intsize.SH', we
would first run 'cd ../scripts' before continuing). If you do not understand this, don't
worry about it.
Here comes the intersting stuff. This script uses the $spitshell variable, and it's not
something we know about...yet. If you look through the Glossary file, you will see that
this is a variable known by metaconfig. If you make this file part of your distribution
(by including it in the MANIFEST.new file, we'll come back to that later on) and run
metaconfig, then the Configure script will determine a suitable value for this variable
and it will be set in config.sh. Same goes for $startsh and the mysterious $eunicefix at
the end. On a reasonable system, the relevant part of config.sh would look like this:
spitshell='cat'
startsh='#!/bin/sh'
eunicefix=':'
Ah! We're getting there. Now it looks familiar. We're facing a single cat command whose
input comes from a variable-interpolated here document and whose output is redirected to
intsize. The value will be that of $startsh, i.e. '#!/bin/sh'. Fine so far.
Then we reach the second here document expansion, to get the remaining of the script. This
time, the here document symbol is surrounded by single quotes so the contents will be
appended verbatim to the intsize file. So, by running 'sh intsize.SH', we get the
following output:
Extracting intsize (with variable substitutions)
and by looking at the produced intsize file, we see:
#!/bin/sh
intsize='4'
echo "On this machine, the int type is $intsize bytes"
which is exactly what we had at the beginning. So far, it's a no-operation procedure...
But, how marvelous! It so happens (pure coincidence, trust me!), that metaconfig knows
about the $intsize shell symbol. By moving the initialization of intsize to the variable-
interpolated area of the .SH script and initializing it with the Configure-computed value,
and removing the now useless comments added by makeSH, we get:
case $CONFIG in
'')
if test -f config.sh; then TOP=.;
elif test -f ../config.sh; then TOP=..;
elif test -f ../../config.sh; then TOP=../..;
elif test -f ../../../config.sh; then TOP=../../..;
elif test -f ../../../../config.sh; then TOP=../../../..;
else
echo "Can't find config.sh."; exit 1
fi
. $TOP/config.sh
;;
esac
case "$0" in
*/*) cd `expr X$0 : 'X\(.*\)/'` ;;
esac
echo "Extracting intsize (with variable substitutions)"
$spitshell >intsize <<!GROK!THIS!
$startsh
intsize='$intsize'
!GROK!THIS!
$spitshell >>intsize <<'!NO!SUBS!'
echo "On this machine, the int type is $intsize bytes"
!NO!SUBS!
chmod 755 intsize
$eunicefix intsize
Of course, running this script through a shell will again output the same script. But if
we run Configure on a machine where an int is stored as a 64 bits quantity, config.sh will
set intsize to 8 and the intsize script will bear the right value and print:
On this machine, the int type is 8 bytes
which is correct. Congratulations! We have just configured a shell script!!
Producing config.h
We can now have a look at the way config.h is produced out of config_h.SH. We know that
running Configure produces a config.sh script (how exactly this is done is not strictly
relevant here, but for the curious, it's another here document substitution within
Configure itself). The config_h.SH itself is built by metaconfig at the same time
Configure is, provided you make use of at least one C symbol within your sources.
Let's have a look at some random config_h.SH file to see what really happens:
case $CONFIG in
'')
if test -f config.sh; then TOP=.;
elif test -f ../config.sh; then TOP=..;
elif test -f ../../config.sh; then TOP=../..;
elif test -f ../../../config.sh; then TOP=../../..;
elif test -f ../../../../config.sh; then TOP=../../../..;
else
echo "Can't find config.sh."; exit 1
fi
. $TOP/config.sh
;;
esac
case "$0" in
*/*) cd `expr X$0 : 'X\(.*\)/'` ;;
esac
echo "Extracting config.h (with variable substitutions)"
sed <<!GROK!THIS! >config.h -e 's!^#undef!/define!' -e 's!^#un-def!#undef!'
/*
* This file was produced by running the config_h.SH script, which
* gets its values from config.sh, which is generally produced by
* running Configure.
*
* Feel free to modify any of this as the need arises. Note, however,
* that running config.h.SH again will wipe out any changes you've made.
* For a more permanent change edit config.sh and rerun config.h.SH.
*/
/* Configuration time: $cf_time
* Configured by: $cf_by
* Target system: $myuname
*/
#ifndef _config_h_
#define _config_h_
/* bcopy:
* This symbol is maped to memcpy if the bcopy() routine is not
* available to copy strings.
*/
/* HAS_BCOPY:
* This symbol is defined if the bcopy() routine is available to
* copy blocks of memory. You should not use this symbol under
* normal circumstances and use bcopy() directly instead, which
* will get mapped to memcpy() if bcopy is not available.
*/
#$d_bcopy HAS_BCOPY /**/
#ifndef HAS_BCOPY
#ifdef bcopy
#un-def bcopy
#endif
#define bcopy(s,d,l) memcpy((d),(s),(l)) /* mapped to memcpy */
#endif
/* HAS_DUP2:
* This symbol, if defined, indicates that the dup2 routine is
* available to duplicate file descriptors.
*/
#$d_dup2 HAS_DUP2 /**/
/* I_STRING:
* This symbol, if defined, indicates to the C program that it should
* include <string.h> (USG systems) instead of <strings.h> (BSD systems).
*/
#$i_string I_STRING /**/
#endif
!GROK!THIS!
At the top of the file, we recognize the standard .SH construct that we have already
studied in detail. Next comes the extraction of the file itself, via a here document with
variable substitutions. However, here we do not use a plain cat but a sed instead, since
we need to do some further editing on-the-fly. We'll see why later on, so let's forget
about it right now.
We now reach the leading comment, and the file is tagged with the configuration time, the
target system, etc... (those variables coming from the sourced config.sh file have been
set up by Configure). That comment header is followed by a '#ifndef' protection to guard
against multiple inclusions of this file. Then comes the heart of the file...
It helps to know that $d_* and $i_* variables are set to either 'define' or 'undef' by
Configure, depending on whether a function or an include file is present on the system or
not. That means the:
#$d_bcopy HAS_BCOPY /**/
line will be expanded to either:
#define HAS_BCOPY /**/
if the $d_bcopy variable is set to 'define' or:
#undef HAS_BCOPY /**/
if $d_bcopy was set to 'undef', because the feature was not there. However, that's not
what gets written in the config.h file because of the sed filter we have already seen,
which will transform the second form into:
/*#define HAS_BCOPY /**/
That's a handy form for later editing of config.h because you only need to remove the
leading '/*' if you want to override Configure's choice. Likewise, you may add a single
'/*' at the beginning of a '#define' line to avoid the definition of a particular symbol.
This is why each symbol definition is protected by a trailing '/**/', to close the leading
comment opened by '/*' (comments are not nested in C).
Now transforming '#undef' into '/*#define' is nice, but if we want to actually write a
'#undef', we're stuck... unless we write it as '#un-def' and let sed fix that to '#undef'
while producing config.h, which is what is actually done here.
The same kind of reasoning applies to those two lines:
#$d_dup2 HAS_DUP2 /**/
#$i_string I_STRING /**/
and assuming config.sh defines:
d_dup2='define'
i_string='undef'
we'll get in the produced config.h:
#define HAS_DUP2 /**/
/*#define I_STRING /**/
Clear as running water? Good!
Now it should be obvious that by including config.h in all your C source files, you get to
know what Configure has guessed on your system. In effect, by using those symbols, you are
writing configured C code, since metaconfig will know that you need those symbols and will
generate a suitable config_h.SH file as well as all the necessary code in Configure to
compute a proper value for them (by assigning values to associated shell variables).
Running Metaconfig
Let's focus on the metaconfig program for a while to understand how it uses its units and
your source code to produce all the needed configuration files. If you intend to write new
units, you should have a good understanding of the whole scheme.
If there is no MANIFEST.new file, metaconfig will try to use the MANIFEST file instead,
for convenience. Everywhere we mention MANIFEST.new, it can be understood as MANIFEST
provided there is no MANIFEST.new file found at the root of your package.
Assuming your MANIFEST.new file is properly set and lists all the source files you wish to
configure, and that you have run packint in your root source directory to create a
.package file, you may run metaconfig and you'll get the following:
$ metaconfig
Locating units...
Extracting dependency lists from 312 units...
Extracting filenames (*.[chyl] and *.SH) from MANIFEST.new...
Building a Wanted file...
Scanning .[chyl] files for symbols...
Scanning .SH files for symbols...
Computing optimal dependency graph...
Building private make file...
Determining loadable units...
Updating make file...
Determining the correct order for the units...
Creating Configure...
Done.
The first phase looks for all the units files (ending with .U) in the public directory
first, then in your private one. If you copy a public file in your private U directory
(i.e. a directory named U at the top level of your package), it will override the public
version. Once it has a list of all the available units, it parses them and extracts all
the ?MAKE: lines to know about the dependencies and the known shell symbols. It also
focuses on the ?H: lines to learn about the C symbols and which shell symbols needs to be
computed to get a proper value for that C symbol (so we have another level of dependencies
here).
Next, the proper filenames are extracted from the MANIFEST.new files and a Wanted file is
built: that file lists all the C symbols and the shell symbols needed for that package. We
first scan the C-type files for C symbols, then propagate the dependencies to their
associated shell symbols (gathered from ?H: lines). Next .SH files are scanned and finally
all the shell symbols are known.
A temporary Makefile is built and metaconfig tries to make all the shell symbols to see
what commands (listed on the second ?MAKE: lines) are executed, and thus which units are
really needed. Optional units not otherwise required are removed and a second Makefile is
generated. This time, we know about all the units and their respective orders, optional
units having been removed and default values computed for their shell symbols. The
Configure script can then be generated, along with config_h.SH. We're done.
Conventions
Proper conventions needs to be followed to make the whole process sound. There is a case
convention for units and a variable naming convention.
All units should have their first letter lower-cased, unless they are special units. By
special, we mean they do not really define new shell variables that can be used by the
user in his .SH files, but rather units producing scripts or shell variables that are to
be used internally by the Configure script. Typical examples are the Init.U file which is
the main variable initialization, or Myread.U which produces the myread script used almost
everywhere in Configure when a question is to be asked to the user.
Non-special units then subdivise in two distinct groups: units defining variables
associated to a C symbol and units defining shell variables of their own. The first group
is further divided in variables related to include files (their name begin with i_) and
variables related to other definitions (name starting with d_). The second group have
names standing for itself, for instance cc.U defines the $cc shell variable whose value is
the C compiler to be used.
Special units sometimes reserve themselves some pre-defined variable and return "results"
in other well-known variables. For instance, the myread script produced by Myread.U
expects the prompt in $rp, the default answer in $dflt and places the user answer in $ans.
This is not documented in this manual page: you have to go and look at the unit itself to
understand which variables are used and how the unit is to be used.
Using The Glossary
The Glossary file is automatically produced by the makegloss script, which extracts the
information from ?S:, ?C: and ?MAKE: lines and reformats them into an alphabetically
sorted glossary. It is important to read the Glossary to know about the symbols you are
allowed to use. However, the Glossary will not tell you how to use them. Usually, that's
up to you.
One day, you will probably write your own units and you will know enough about metaconfig
to do so quickly and efficiently. However, never forget to properly document your work in
the ?S: and ?C: lines, or other people will not be able to reuse it. Remember about the
time where you had only the Glossary and this manual page to get started.
Conclusion
Now that you know the metaconfig basics, you should read the DESCRIPTION section, then
skip to the REFERENCE section to learn about all the gory details such as the allowed
syntax for unit control lines (lines starting with a '?') or the distinct MAKE commands
you are allowed to use.
REFERENCE
This section documents the internals of metaconfig, basically the unit syntax, the special
units you should know about and the hint files.
General Unit Syntax
A metaconfig unit is divided into two distinct parts. The header section (lines starting
with '?') and a shell section (code to be included in the Configure script). It is
possible to add '?X:' comments anywhere within the unit, but the other '?' lines (also
called control lines) have a strict ordering policy.
If a control line is too long, it is possible to use a continuation by escaping the final
new-line with a backslash and continuing on the next line (which should then be indented
by spaces or tabs).
The following is a formal description of each of the control lines. Unless stated
otherwise, the order of this presentation is the order to be used within the unit.
?RCS: free text
To be used for RCS comments, at the top of the unit.
?X: any text
General purpose comments. May appear anywhere in the unit but must be left justfied.
For RCS comments, please use the ?RCS: comment form.
?MAKE:symbol list: dependency list [+optional]
This is the first dependency line. The first symbol list should list all the symbols
built by this unit (i.e. whose value is computed by the shell section of the unit).
Symbols should be space separated. If a defined symbol is for internal use only and
should not appear in the generated config.sh file, then it should be preceded by a
'+' (not to be confused with optional dependencies defined hereafter). The second
part of the list (after the middle ':') is the unit dependency. It should list all
the needed special units, as well as all the symbols used by the shell
implementation. If a symbol is nedded but its configuration value is not critical, it
can be preceded by a '+', in which case it is called a conditional dependency: its
corresponding unit will be loaded if, and only if, that symbol is otherwise really
wanted; otherwise the default value will be used.
?MAKE:tab command
There can be one or more command lines following the initial dependency lines. Those
commands will be executed when the unit is wanted to load them into Configure. See
the paragraph about make commands for more information. Note that the leading tab
character is required before the command.
?Y:layout
Declare a layout directive for this unit. That directive may be one of the strings
top, default or bottom (case does not matter, recommended style is to spell them out
uppercased). If omitted, default is assumed.
This directive is only required if you wish to force a unit at the top or the bottom
of the generated Configure script, as unit dependencies permit it. Important
questions may thus be forced at the beginning. Within the same layout class, units
are sorted alphabetically with two special cases for d_* and i_* units, forced
respectively at the top and bottom of their classes (but these should belong to the
default class).
It you force at the top a unit whose dependencies require all the other unit to
precede it, you achieve nothing interesting. Therefore, that directive should really
be used to increase the priority of some interactive units that do not depend on many
other user-visible symbols, like path-related questions.
?S:symbol_name [(obsolete symbol list)]:
Introduces a shell symbol. This first line names the symbol, optionally followed by a
list enclosed between parenthesis and giving the obsolete equivalent. Those obsolete
symbols will be remapped to the new symbol_name if the -o option is given to
metaconfig.
?S:any text, for Glossary
Basically a comment describing the shell symbol, which will be extracted by makegloss
into the Glossary file.
?S:. Closes the shell symbol comment.
?C:symbol_name [~ alias] [(obsolete symbol list)]:
Introduces a new C symbol. The alias name is the name under which the C symbol will
be controlled, i.e. if the alias symbol is wanted, then that C symbol will be written
in the config_h.SH file. Usually, the alias is just '%<' (stands for the unit's name)
and there is also a ?W: line mapping a C symbol to the alias. Also the relevant parts
of the ?H: lines are explicitly protected by a '?%<' condition. See the symbol
aliasing paragraph for more details. The remaining of the line is the optional
obsolete symbol list, which lists old equivalents for the new symbol_name.
?C:any text, for Glossary and config_h.SH
Basically a comment describing the C symbol, which will be extracted by makegloss
into the Glossary file and by metaconfig into the config_h.SH file if the symbol is
wanted (or if its alias is wanted when symbol aliasing is used).
?C:. Closes the C symbol comment.
?H:?symbol:config_h.SH stuff
This is the general inclusion request into config_h.SH. The line is only written when
the guarding symbol is really wanted. This general form is needed when C symbol
aliasing was used. Otherwise, if you use one of the other "standard" forms, the
guarding is automatically done by metaconfig itself.
?H:#$d_var VAR "$var"
Conditionally defines the VAR C symbol into $var when is set to 'define'. Implies a
'?VAR:' guarding condition, and metaconfig automatically links VAR to its two shell
variable dependencies (i.e. both $d_var and $var will be flagged as wanted if VAR is
used in C sources).
?H:#define VAR [optional text]
Always defines the VAR C symbol to some value. Implies a '?VAR:' guarding condition.
An automatic shell dependency is made to the unit itself.
?H:#define VAR(x,y,z) $var
Always defines the macro VAR to be the value of the $var variable. It is up to the
unit to ensure $var holds a sensible value. An automatic dependency between the C
macro VAR and the shell variable is established, and the whole line is guarded by an
implicit '?VAR:'.
?H:#$d_var VAR
Conditionally defines VAR if $d_var is set to 'define'. Implies a '?VAR:' guarding
condition. An automatic shell dependency is generated towards $d_war.
?H:#define VAR "$var"
Assigns a configured value to the VAR C symbol. Implies a '?VAR:' gurading condition.
An automatic shell dependency is generated to link VAR and $var.
?H:. Closes the config_h.SH inclusion requests.
?M:C symbol: C dependencies
Introduces magic definition concerning the C symbol, for confmagic.h, and defines the
guarding symbol for the remaining ?M: definitions. This line silently implies
'?W:%<:C symbol', i.e. the unit will be loaded into Configure if the C symbol appears
within the C sources, whether magic is used or not. The C dependencies are activated
when magic is used, in order to force their definition in config_h.SH. However, if
magic is not used but the C symbol appears in the source without the needed C
dependencies, you will be warned every time the Wanted file is built, since it may be
a portability issue (and also because the unit is unconditionally loaded into
Configure whenever the C symbol is used, regardless of the other ?C: lines from the
unit).
?M:cpp defs
Defines the magic cpp mapping to be introduced in confmagic.h whenever the concerned
symbol is used. There is an implicit '?sym' guarding where sym is the symbol name
defined by the leading ?M: line.
?M:. Closes the confmagic.h inclusion request.
?W:shell symbol list:C symbol list
Ties up the destiny of the shell symbols with that of the C symbols: if any of the C
symbols listed is wanted, then all the shell symbols are marked as wanted. Useful to
force inclusion of a unit (shell symbol list set to '%<') when the presence of some C
symbol is detected. The shell symbol list may be left empty, to benefit from the side
effect of C symbol location within the builtin pre-processor (symbol being defined
for that pre-processor if located in the source). To look for patterns with a space
in them, you need to quote the C symbols within simple quotes, as in 'struct
timezone'.
?V:read-only symbols:read-write symbols
This is a metalint hint and should be used only in special units exporting some shell
variables. The variables before the middle ':' are exported read-only (changing them
will issue a warning), while other symbols may be freely read and changed.
?F:files created
This line serves two purposes: it is a metalint hint, and also a placeholder for
future jmake use. It must list three kind of files: the temporary one which are
created for a test, the private UU ones created in the UU directory for later
perusal, and the public ones left in the root directory of the package. Temporary
files must be listed with a preceding '!' character (meaning "no! they're not re-used
later!"), private UU files should be preceded by a './' (meaning: to use them, say
./file, not just file), and public ones should be named as-is.
?T:shell temporaries
Another metalint hint. This line lists all the shell variables used as temporaries
within the shell section of this unit.
?D:symbol='value'
Initialization value for symbols used as conditional dependencies. If no ?D: line is
found, then a null value is used instead. The metalint program will warn you if a
symbol is used at least once as a conditional dependency and does not have a proper
?D: initialization. It's a good practice to add those lines even for a null
initialization since it emphasizes on the possibly optional nature of a symbol.
?O:any message you want
This directive indicates that this unit is obsolete as a whole. Whenever usage of any
of its symbols is made (or indirect usage via dependencies), the message is output on
the screen (on stderr). You can put one ore more lines, in which case each line will
be printed, in order.
?LINT:metalint hints
See the metalint manual page for an explaination of the distinct hints that can be
used.
?INIT:initialization code
The initialization code specified by this line will be loaded at the top of the
Configure script provided the unit is needed.
C Symbol Aliasing
Sometimes it is not possible to rely on metaconfig's own default selection for config_h.SH
comments and C symbol definition. That's where aliasing comes into play. Since it's rather
tricky to explain, we'll study an example to understand the underlying mechanism.
The d_const.U unit tries to determine whether or not your C compiler known about the const
keyword. If it doesn't we want to remap that keyword to a null string, in order to let the
program compile. Moreover, we want to automatically trigger the test when the const word
is used.
Here are the relevant parts of the d_const.U unit:
?MAKE:d_const: cat cc ccflags Setvar
?MAKE: -pick add $@ %<
?S:d_const:
?S: This variable conditionally defines the HASCONST symbol, which
?S: indicates to the C program that this C compiler knows about the
?S: const type.
?S:.
?C:HASCONST ~ %<:
?C: This symbol, if defined, indicates that this C compiler knows about
?C: the const type. There is no need to actually test for that symbol
?C: within your programs. The mere use of the "const" keyword will
?C: trigger the necessary tests.
?C:.
?H:?%<:#$d_const HASCONST /**/
?H:?%<:#ifndef HASCONST
?H:?%<:#define const
?H:?%<:#endif
?H:.
?W:%<:const
?LINT:set d_const
?LINT:known const
: check for const keyword
echo " "
echo 'Checking to see if your C compiler knows about "const"...' >&4
/bin/cat >const.c <<'EOCP'
main()
{
const char *foo;
}
EOCP
if $cc -c $ccflags const.c >/dev/null 2>&1 ; then
val="$define"
echo "Yup, it does."
else
val="$undef"
echo "Nope, it doesn't."
fi
set d_const
eval $setvar
First we notice the use of a ?W: line, which basically says: "This unit is wanted when the
const keyword is used in a C file.". In order to conditionally remap const to a null
string in config.h, I chose to conditionally define HASCONST via $d_const.
However, this raises a problem, because the HASCONST symbol is not going to be used in the
sources, only the const token is. And the ?H: line defining HASCONST is implicitely
guarded by '?HASCONST'. Therefore, we must add the explicit '?%<' constraint to tell
metaconfig that those lines should be included in config_h.SH whenever the '%<' symbol
gets wanted (%< refers to the unit's name, here d_const).
That's almost perfect, because the ?W: line will want d_const whenever const is used, then
the ?H: lines will get included in the config_h.SH file. However, the leading comment (?C:
lines) attached to HASCONST is itself also guarded via HASCONST, i.e. it has an implicit
'?HASCONST' constraint. Hence the need for aliasing the HASCONST symbol to '%<'.
The remaining part of the unit (the shell part) is really straightforward. It simply
tries to compile a sample C program using the const keyword. If it can, then it will
define $d_const via the $setvar fonction (defined by the Setvar.U unit). See the paragraph
about special units for more details.
Make Commands
On the ?MAKE: command line, you may write a shell command to be executed as-is or a
special -pick command which is trapped by metaconfig and parsed to see what should be
done. The leading '-' is only there to prevent make from failing when the command returns
a non-zero status -- it's not really needed since we use 'make -n' to resolve the
dependencies, but I advise you to keep it in case it becomes mandatory in future versions.
The syntax of the pick command is:
-pick cmd $@ target_file
where $@ is the standard macro within Makefiles standing for the current target (the name
of the unit being built, with the final .U extension stripped). The cmd part is the
actual metaconfig command to be run, and the target_file is yet another parameter, whose
interpretation depends on the cmd itself. It also has its final .U extension stripped and
normally refers to a unit file, unless it start with './' in which case it references one
of the metaconfig control files in the '.MT directory.
The available commands are:
add Adds the target_file to Configure.
add.Config_sh
Fills in that part of Configure producing the config.sh file. Only used
variables are added, conditional ones (from conditional dependencies) are
skipped.
add.Null Adds the section initializing all the shell variables used to an empty string.
c_h_weed Produces the config_h.SH file. Only the necessary lines are printed.
cm_h_weed Produces the confmagic.h file. Only the necessary lines are printed. This
command is only enabled when the -M switch is given, or when a confmagic.h file
already exists.
close.Config_sh
Adds the final 'EOT' symbol on a line by itself to end the here document
construct producing the config.sh file.
prepend Prepends the content of the target to the target_file if that file is not empty.
weed Adds the unit to Configure like the add command, but make some additional tests
to remove the '?symbol' and '%symbol' lines from the target_file if the symbol
is not wanted or conditionally wanted. The '%' form is only used internally by
metaconfig while producing its own .U files in the '.MT' directory.
wipe Same as add really, but performs an additional macro substitution. The
available macros are described in the Hardwired Macros paragraph.
As a side note, metaconfig generates a -cond command internally to deal with conditional
dependencies. You should not use it by yourself, but you will see it if scanning the
generated Makefile in the .MT directory.
Hardwired Macros
The following macros are recognized by the wipe command and subsituted before inclusion in
Configure:
<BASEREV> The base revision number of the package, derived from .package.
<DATE> The current date.
<MAINTLOC>
The e-mail address of the maintainer of this package, derived from your
.package.
<PACKAGENAME>
The name of the package, as derived from your .package file.
<PATCHLEVEL>
The patch level of the metaconfig program (deprecated in favor of <REVISION>).
<REVISION>
The SVN revision level of the metaconfig program.
<VERSION> The version number of the metaconfig program.
Those macros are mainly used to identify the metaconfig version that generated a
particular Configure script and for which package it was done. The e-mail address of the
maintainer is hardwired in the leading instructions that Configure prints when starting.
Recent metaconfig versions understand a much more general syntax of the form:
<$variable>
which is replaced at Configure-generation time by the value of variable taken from your
.package file. Eventually, the old hardwired macro format will disappear, and <$baserev>
will replace <BASEREV> in all the supplied units.
Special Units
The following special units are used to factorize code and provide higher level
functionalities. They either produce a shell script that can be sourced or a shell
variable that can be eval'ed. Parameter passing is done via well-know variables, either
named or anonymous like $1, $2, etc... (which can be easily set via the shell set
operator). When Configure executes, it creates and goes into a UU directory, so every
produced script lies in there and does not interfere with the files from your package.
Here are the sepcial units that you should know about, and the way to use them.
Cppsym.U
This unit produces a shell script called Cppsym, which can be used to determine
whether any symbol in a list is defined by the C preprocessor or C compiler you have
specified. It can determine the status of any symbol, though the symbols in
(attribute list) are more easily determined.
Csym.U
This sets the $csym shell variable, used internally by Configure to check whether a
given C symbol is defined or not. A typical use is:
set symbol result [-fva] [previous]
eval $csym
That will set the result variable to 'true' if the function [-f], variable [-v] or
array [-a] is defined, 'false' otherwise. If a previous value is given and the -r
switch was provided to Configure (see the Configure Options paragraph), then that
value is re-used without questioning.
The way this computation is done depends on the answer the user gives to the question
Configure will ask about whether it should perform an nm extraction or not. If the
exctraction was performed, the unit simply looks through the symbol list, otherwise
it performs a compile-link test, unless -r was given to reuse the previously computed
value, naturally...
End.U
By copying this unit into your private U directory and appending dependencies on the
?MAKE: line, you can force a given unit to be loaded into Configure even if it is not
otherwise wanted. Some units may only be forced into Configure that way.
Filexp.U
This unit produces a shell script filexp which will expand filenames beginning with
tildes. A typical use is:
exp_name=`./filexp $name`
to assign the expanded file name in exp_name.
Findhdr.U
This unit produces a findhdr script which is used to locate the header files in
$usrinc or other stranger places using cpp capabilities. The script is given an
include file base name like 'stdio.h' or 'sys/file.h' and it returns the full path of
the inlcude file and a zero status if found, or an empty string and a non-zero status
if the file could not be located.
Getfile.U
This unit produces a bit of shell code that must be sourced in order to get a file
name and make some sanity checks. Optionally, a ~name expansion is performed.
To use this unit, $rp and $dflt must hold the question and the default answer, which
will be passed as-is to the myread script (see forthcoming Myread.U). The $fn
variable controls the operation and the result is returned into $ans.
To locate a file or directory, put 'f' or 'd' in f~/. If a '~' appears, then ~name
substitution is allowed. If a '/' appears, only absolute pathnames are accepted and
~name subsitutions are always expanded before returning. If '+' is specified,
existence checks are skipped. If 'n' appears within $fn, then the user is allowed to
answer 'none'.
Usually, unless you asked for portability, ~name substitution occurs when requested.
However, there are some times you wish to bypass portability and force the
substitution. You may use the 'e' letter (expand) to do that.
If the special 'l' (locate) type is used, then the $fn variable must end with a ':',
followed by a file basename. If the answer is a directory, the file basename will be
appended before testing for file existence. This is useful in locate-style questions
like this:
dflt='~news/lib'
: no need to specify 'd' or 'f' when 'l' is used
fn='l~:active'
rp='Where is the active file?'
. ./getfile
active="$ans"
Additionally, the 'p' (path) letter may be used in conjunction with 'l' to tell
getfile that an answer without a '/' in it should be accepted, assuming that it will
be in everyone's PATH at the time this value will be needed.
Also useful is the possibility to specify a list of answers that should be accepted
verbatim, bypassing all the checks. This list must be within parenthesis and items
must be comma separated, with no interleaving spaces. Don't forget to quote the
resulting string since parenthesis are meaningful to the shell. For instance:
dflt='/bin/install'
fn='/fe~(install,./install)'
rp='Use which install program?'
. ./getfile
install="$ans"
would let the user only specify fully qualified paths referring to existing files,
but still allow the special "install" and "./install" answers as-is (assuming of
course something will deal with them specially later on in the chain since they do
not conform with the general expected frame).
If the answer to the question is 'none', then the existence checks are skipped and
the empty string is returned. Note that since getfile calls myread internally, all
the features available with myread apply here to.
If a completely expanded value is needed (for instance in a Makefile), you may use
the $ansexp variable which is always set up properly by getfile as the expanded
version of $ans. Of course, it will not expand ~name if you did not allow that in the
first place in the $fn variable.
Inhdr.U
This unit produces the $inhdr shell variable, used internally by Configure to check
whether a set of headers exist or not. A typical use is:
set header i_header [ header2 i_header2 ... ]
eval $inhdr
That will print a message, saying whether the header was found or not and set the
i_header variable accordingly. If more than one header is specified and the first
header is not found, we try the next one, until the list is empty or one is found.
Inlibc.U
This unit produces the $inlibc shell variable, used internally by Configure to check
whether a given C function is defined or not. A typical use is:
set function d_func
eval $inlibc
That will print a message, saying whether the function was found or not and set
$d_func accordingly. Internally, it used the $csym routine.
Loc.U
This important unit produces a shell script loc which can be used to find out where
in a list of directories a given file lies. The first argument specifies the file to
be located, the second argument is what will be returned if the search fails, and the
reamining arguments are a list of directories where the file is to be searched. For
instance:
dflt=`./loc sendmail.cf X /usr/lib /var/lib/sendmail /lib`
would set $dflt to X if no sendmail.cf file was found under the listed directories,
or something like /usr/lib/sendmail.cf on some systems. See also Getfile.U.
MailAuthor.U
This unit needs to be included on the ?MAKE: line of your own private End.U to make
it into Configure. It offers the user to register himself to the author, optionally
being notified when new patches arrive or receiving them automatically when issued.
You need to install mailagent to do this (at least version 3.0).
MailList.U
This unit needs to be included on the ?MAKE: line of your own private End.U to make
it into Configure. It offers the user to subscribe or unsubscribe to a mailing list
where discussion related to the package are taking place. You need to run packinit
and answer the mailing list related questions to set up the proper variables in your
.package before this unit may become operational.
Myinit.U
Copy this unit into your private U directory to add your own default values to some
internal variables. This unit is loaded into Configure after all the default
initializations have been done.
Myread.U
This unit produces the myread shell script that must be sourced in order to do a
read. It allows shell escapes, default assignment and parameter evaluation, as
documented in the Instruct.U unit. It also allows dynamic setting of the -d option,
which will be used for the remaining of the script execution.
To use this unit, $rp must hold the question and $dflt should contain the default
answer. The question will be printed by the script itself, and the result is returned
in the $ans variable.
Here is a typical usage:
dflt='y'
rp='Question?'
. ./myread
value="$ans"
See the unit itself for more information.
Oldconfig.U
This unit must be part of your dependency ?MAKE: line when some of your units tries
to reuse an old symbol value. This unit is responsible for getting the old answers
from config.sh or providing useful hints when running on a given platform for the
first time. See the Configure Hints paragraph for more information about hints.
Prefixit.U
The purpose of this unit is to detect changes in the installation prefix directory to
recompute automatically suitable defaults from previous answers. It relies on the
value of the $oldprefix variable which holds the previous prefix directory when it
changed, and is empty otherwise. For instance, if the prefix was changed from /opt to
/usr/local, then the previous binary installation directory will be changed from
/opt/bin to /usr/local/bin, or will remain unchanged if it was, say, /bin.
You need to call set before issuing an eval on $prefixit, such as:
set dflt var [dir]
eval $prefixit
which would set $dflt to $var or $prefix/dir depending on whether the prefix remained
the same or not. If dir is the string none, a single space value in $dflt is kept as-
is, even when the prefix changes. If dir is omitted, then $dflt is set to an empty
string if the prefix changed, to $var otherwise.
Prefixup.U
The intent of thit unit is similar to that of Prefixit.U, i.e. it helps fixing the
default string to accommodate prefix changes. However, the shell variable $prefixup,
when evaluated, will only restore ~name expansions, should prefix use such an escape
mechanism. Use it as:
set dflt
eval $prefixup
before prompting via getfile for instance. If the prefix does not make use of ~name
expanstion, then the above will be a no-op on the y variable, naturally.
Specific.U
This unit is empty by default. It is meant as a project-specific hook to have shell
code executed by Configure after config.sh was generated but before the extraction of
.SH files.
Copy the unit to your project's U/ directory and customize it.
Here is what the dist project uses it for (showing only the unit's code, not the full
unit here):
: project-specific code
file=revision.h
echo " "
echo "Generating $file..." >&4
bin/svn-revision . $file
That shell code is executed when Configure is back to the top directory of the source
tree.
Typedef.U
This unit produces the $typedef shell variable, used internally by Configure to check
whether a typedef exists or not. A typical use is:
set typedef val_t default [ includes ]
eval $typedef
This will set the variable val_t to the value of default if the typedef was not found
among the listed include files, or to typedef if found. If no include files are
specified, the unit looks in <sys/types.h> only. If you specifiy some includes, only
those are looked at.
Unix.U
The purpose of this unit is to define some of the most common UNIX-isms via variables
which can be altered from the command line or via proper hint files. In particular,
$_exe, $_o and $_a are set. All the units should refer to $_o and not to .o directly.
The '.' is part of these variables.
Setvar.U
This unit produces the variable, which is used internally by Configure to set a
define/undef value to a given symbol, emitting a warning when it suddenly changes
from a previous value. For instance:
val="$define"
set d_variable
eval $setvar
If the previous $d_variable value was non-null and $val is different, a "whoa"
warning is issued.
Whoa.U
This unit produces the whoa script, which emits a warning when the value in variable
whose name is $var is not the same as its old previous value held in $was. Upon
return, $td and $tu hold the proper value to define or undef the variable. See
examples in Inlibc.U.
Builtin Pre-processor
Each unit to be included in Configure is ran through a built-in pre-processor. Pre-
processor statements are introduced by the '@' character ('#' is the shell comment
character). It functions merely as the C pre-processor does but allows for shell and perl
escapes. Here are the available functions:
@if expression
If expression is true, continue loading code until @end, @elsif or @else.
@elsif expression
Alternative choice. If expression is true, continue loading code until @end,
another @elsif or @else.
@else Default code to be loaded if the @if expression was false and none of the
optional @elsif matched. Load until @end.
@end Close the conditional loading statement opened by @if.
@define symbol
Tells the pre-processor that symbol is defined from now on.
The conditional expression can include symbol names (value is true if symbol is wanted or
defined via @define or shell/perl escapes. Those atoms can be combined using the
traditional boolean operators '!' for negation, '&&' for logical and, and '||' for logical
or.
Text enclosed within single brackets is a shell test, while text between double brakets is
a perl test. Namely the expressions:
{ shell text }
{{ perl text }}
are translated into:
if shell text >/dev/null 2>&1; then exit 0; else exit 1; fi
if (perl text) {exit 0;} else {exit 1;}
and the exit status is used in the standard way to get a boolean value, i.e. 0 is true and
everything else is false. Note that only simple conditions can be expressed in perl, until
some complex code can be loaded within metaconfig and executed.
The built-in pre-processor can be used to finely tune some units (see d_gethname.U for a
complex example) depending on the symbols actually used by the program or the files
present in the distribution. For instance, the Oldconfig.U uses a test like:
@if {test -d ../hints}
and Configure will contain hint-dependent code only if there is a hints directory in the
package's top level directory. Note that tests are ran from within the '.MT' directory,
hence the needed '../' in the test.
The pre-processor can also be used to avoid putting useless code when a symbol is not
defined. Units defining more than one symbol can be protected that way (since the unit is
loaded as a whole) by gathering symbol-dependent code within an @if/@end pair. For
instance:
@if I_TIME || I_SYS_TIME || I_SYS_TIME_KERNEL
need_time_h='true'
@else
need_time_h='false'
@end
will test whether the source code makes any use of one of the three symbols that control
the time.h or sys/time.h inclusion and define the shell symbol accordingly. That gives
Configure a feedback on what the sources need and avoid the drawback of having fixed
frozen units.
Via the '?W:' lines, you can get intersting combinations. For instance, the i_time.U unit
needs to know whether the C sources make any use of the struct timezone type. Therefore,
the line:
?W::timezone
is used for its side-effect of defining the symbol timezone for the pre-processor. The
unit code can then say:
@if timezone
for s_timezone in '-DS_TIMEZONE' ''; do
@else
s_timezone=''
@end
... code using s_timezone ...
@if timezone
done
@end
and have an extra loop trying two successive values for the s_timezone variable, but only
if needed.
Obsolete Symbols
Obsolete symbols are preserved to ease the transition with older metaconfig units. Unless
the -o switch is passed to metaconfig they will be ignored. However, an Obsolete file will
be generated, telling you which files are making use of those obsolete symbols and what
are the new symbols to be used.
The lifetime for obsolete symbols is one full revision, i.e. they will be removed when the
next base revision is issued (patch upgrades do not count of course). Therefore, it is
wise to translate your sources and start using the new symbols as soon as possible.
Configure Hints
It may happen that the internal configuration logic makes the wrong choices. For
instance, on some platform, the vfork() system call is present but broken, so it should
not be used. It is not possible to include that knowledge in the units themselves, because
that might be a temporary problem which the vendor will eventually fix, or something that
was introduced by a new OS upgrade.
Anyway, for all those tiny little problems that are too system-specific, metaconfig
provides hint files support. To use it, you need to create a hints directory in the
package's top level directory, and have it when you run metaconfig. That will load the
hint-related part from Oldconfig.U.
From then on, you may pre-set some of the shell variables Configure uses in an OS-specific
.sh file. There is code in Oldconfig.U that tries to guess which hint files are needed by
computing a standard name based on the system OS name, the kernel name, the release
number, etc... Since this information is likely to change rapidly, I'm not documenting it
here. You have to reverse engineer the code from Oldconfig.U.
When you first release your package, your hints file directory should be empty. If the
users of your package complain that they have problem with Configure defaults on a
particular system, you have to see whether this is a platform-specific problem or a
general one. In the former case, it's time to introduce a new hint file, while in the
latter, the corresponding unit should be revised.
For instance, SGI systems are known to have a broken vfork() system call, as of this
writing. And the corresponding hint file name is sgi.sh. So all you need to do is create
a hints/sgi.sh file in which you write:
d_vfork="$define"
which will always remap vfork on fork (see d_vfork.U). When running on SGI systems for the
first time, Configure will detect that there is an hints/sgi.sh file, and that we are on
an IRIX machine (the kernel name is often /irix), therefore it will propose sgi as a
possible hint. If the user accepts it, and since the $d_vfork value is modified via the
$setvar call, a whoa! will be emitted to warn that we are about to override the value
computed by Configure.
Note that you don't have to provide all the hints known by Oldconfig.U. If a hint file is
missing, it will not be proposed as a possible choice. The heuristic tests ran to compute
the possible hint candidates are flaky. If you have new values or different tests, please
send them to me...
Overriding Choices
If you create a config.over file in the top level directory, Configure will ask you if you
wish to load it to override the default values. This is done prior creation of the
config.sh file, so it gives you a chance to patch the values stored in there.
This is distinct from the hints approach in that it is a local file, which the user is
free to create for his own usage. You should not provide such a file yourself, but let the
user know about this possibility.
Configure Options
The Configure script may be called with some options specified on the command line, to
slightly modify its behaviour. Here are the allowed options:
-d Use defaults for all answers.
-e Go on without questioning past the production of config.sh.
-f file Use the specified file as a default configuration. If this switch is not used,
the configuration is taken from config.sh, when present.
-h Print help message and exit.
-r Reuse C symbols value if possible. This will skip the costly nm symbol
extraction. If used the first time (with no previous configuration file),
Configure will try to compile and link a small program in order to know about
the presence of a symbol, or absence thereof.
-s Silent mode. Only strings printed on file descriptor #4 will be seen on the
screen (that's the important messages). It's not possible to completely turn off
any output, but you may use 'Configure -ders >/dev/null 2>&1' to have a full
batch run with no output and no user interaction required.
-D symbol=value
Pre-defines symbol to bear the specified value. It is also possible to use '-D
symbol' which will use a default value of 'define'.
-E Stop at the end of the configuration questions, after having produced a
config.sh. This will not perform any 'make depend' or .SH files extraction.
-K Knowledgeable user. When you use this option, you know what you are doing and
therefore the config.sh file will always be handled as if it was intended to be
re-used, even though it might have been generated on an alien system. It also
prevents aborting when Configure detects an unusable C compiler or a wrong set
of C flags. Further shortcuts might be turned on by this option as well in the
future. This option is documented in the Configure usage message, to remind us
about its existence, but the given description is hoped to be cryptic enough.
:-)
-O Allow values specified via a -D or -U to override settings from any loaded
configuration file. This is not the default behaviour since the overriding will
not be propagated to variables derived from those you are presently altering.
Naturally, without -O, the setting is only done when no configuration file is
loaded, which is safe since derivative variables have not been computed yet...
-S Perform variable substitution on all the .SH files. You can combine it with the
-f switch to propagate any configuration you like.
-U symbol=
Pre-sets symbol to bear an empty value. It is also possible to use '-U symbol'
which will set symbol to 'undef'.
-V Print the version number of the metaconfig that generated this Configure script
and exit.
Running Environment
Upon starting, Configure creates a local UU directory and runs from there. The directory
is removed when Configure ends, but this means you must run the script from a place where
you can write, i.e. not from a read-only file system.
You can run Configure remotely though, as in:
../package/Configure
to configure sources that are not present locally. All the generated files will be put in
the directory where you're running the script from. This magic is done thanks to the src.U
unit, which is setting the $src and $rsrc variables to point to the package sources. That
path is full or relative, depending on whether Configure was invoked via a full or
relative path.
From within the UU subdirectory, you can use $rsrc to access the source files (units
referring to source files link hints shall always use this mechanism and not assume the
file is present in the parent directory). All the Makefiles should use the $src variable
as a pointer to the sources from the top of the build directory (where Configure is run),
either directly or via a VPATH setting.
When running Configure remotely, the .SH files are extracted in the build directory, not
in the source tree. However, it requires some kind of a make support to be able to compile
things in a build directory whilst the sources lie elsewhere.
Using Magic Redefinitions
By making use of the -M switch, some magic remappings may take place within a confmagic.h
file. That file needs to be included after config.h, of course, but also after all the
other needed include files. Namely:
#include "config.h"
...
... other inclusions ...
...
#include "confmagic.h"
Typically, confmagic.h will attempt to remap bcopy() on memcpy() if no bcopy() is
available locally, or transform vfork into fork when necessary, hence making it useless to
bother about the HAS_VFORK symbol.
This configuration magic is documented in the Glossary file.
Unit Templates
There is a set of unit templates in the metaconfig source directory, which are intended to
be used by a (not yet written) program to quickly produce new units for various kind of
situations. No documentation for this unfinished project, but I thought I would mention it
in the manual page in case you wish to do it yourself and then contribute it...
AUTHORS
Larry Wall <lwall@netlabs.com> for version 2.0.
Harlan Stenn <harlan@mumps.pfcs.com> for important unit extensions.
Raphael Manfredi <Raphael.Manfredi@pobox.com>.
Many other contributors for the metaconfig units. See the credit file for a list.
FILES
LIB/dist/mcon/U/*.U
Public unit files
U/*.U Private unit files
LIB/dist/mcon/Glossary
Glossary file, describing all the metaconfig symbols.
Obsolete Lists all the obsolete symbols used by the sources.
Wanted Lists all the wanted symbols.
where LIB is /usr/share/dist.
BUGS
Units are sometimes included unnecessarily if one of its symbols is accidentally
mentioned, e.g. in a comment. Better too many units than too few, however.
SEE ALSO
pat(1), makeSH(1), makedist(1), metalint(1)
Version 3.5 PL0 METACONFIG(1)