Provided by: mmdebstrap_0.8.4-1ubuntu0.1_all 
NAME
mmdebstrap - multi-mirror Debian chroot creation
SYNOPSIS
mmdebstrap [OPTION...] [SUITE [TARGET [MIRROR...]]]
DESCRIPTION
mmdebstrap creates a Debian chroot of SUITE into TARGET from one or more MIRRORs. It is
meant as an alternative to the debootstrap tool (see section DEBOOTSTRAP). In contrast to
debootstrap it uses apt to resolve dependencies and is thus able to use more than one
mirror and resolve more complex dependencies.
If no MIRROR option is provided, <http://deb.debian.org/debian> is used. If SUITE is a
stable release name and no MIRROR is specified, then mirrors for updates and security are
automatically added. If a MIRROR option starts with "deb " or "deb-src " then it is used
as a one-line-style format entry for apt's sources.list inside the chroot. If a MIRROR
option contains a "://" then it is interpreted as a mirror URI and the apt line inside the
chroot is assembled as "deb [arch=A] B C D" where A is the host's native architecture, B
is the MIRROR, C is the given SUITE and D is the components given via --components
(defaults to "main"). If a MIRROR option happens to be an existing file, then its contents
are pasted into the chroot's sources.list. This can be used to supply a deb822 style
sources.list. If MIRROR is "-" then standard input is pasted into the chroot's
sources.list. More than one mirror can be specified and are appended to the chroot's
sources.list in the given order. If you specify a https or tor MIRROR and you want the
chroot to be able to update itself, don't forget to also install the ca-certificates
package, the apt-transport-https package for apt versions less than 1.5 and/or the apt-
transport-tor package using the --include option, as necessary.
The optional TARGET argument can either be the path to a directory, the path to a tarball
filename, the path to a squashfs image, the path to an ext2 image, a FIFO, a character
special device, or "-". Without the --format option, TARGET will be used to choose the
format. See the section FORMATS for more information. If no TARGET was specified or if
TARGET is "-", an uncompressed tarball will be sent to standard output.
The SUITE may be a valid release code name (eg, sid, stretch, jessie) or a symbolic name
(eg, unstable, testing, stable, oldstable). Any suite name that works with apt on the
given mirror will work. If no SUITE was specified, then a single MIRROR "-" is added and
thus the information of the desired suite has to come from standard input as part of a
valid apt sources.list file. The value of the SUITE argument will be used to determine
which apt index to use for finding out the set of "Essential:yes" packages and/or the set
of packages with the right priority for the selected variant. See the section VARIANTS for
more information.
All status output is printed to standard error unless --logfile is used to redirect it to
a file or --quiet or --silent is used to suppress any output on standard error. Help and
version information will be printed to standard error with the --help and --version
options, respectively. Otherwise, an uncompressed tarball might be sent to standard
output if TARGET is "-" or if no TARGET was specified.
OPTIONS
Options are case insensitive. Short options may be bundled. Long options require a double
dash and may be abbreviated to uniqueness.
-h,--help
Print synopsis and options of this man page and exit.
--man Show the full man page as generated from Perl POD in a pager. This requires the
perldoc program from the perl-doc package. This is the same as running:
pod2man /usr/bin/mmdebstrap | man -l -
--version
Print the mmdebstrap version and exit.
--variant=name
Choose which package set to install. Valid variant names are extract, custom,
essential, apt, required, minbase, buildd, important, debootstrap, -, and
standard. The default variant is debootstrap. See the section VARIANTS for more
information.
--mode=name
Choose how to perform the chroot operation and create a filesystem with ownership
information different from the current user. Valid mode names are auto, sudo,
root, unshare, fakeroot, fakechroot, proot and chrootless. The default mode is
auto. See the section MODES for more information.
--format=name
Choose the output format. Valid format names are auto, directory, tar, squashfs,
ext2 and null. The default format is auto. See the section FORMATS for more
information.
--aptopt=option|file
Pass arbitrary options to apt. Will be permamently added to
/etc/apt/apt.conf.d/99mmdebstrap inside the chroot. Use hooks for temporary
configuration options. Can be specified multiple times. Each option will be
appended to 99mmdebstrap. A semicolon will be added at the end of the option if
necessary. If the command line argument is an existing file, the content of the
file will be appended to 99mmdebstrap verbatim.
Example: This is necessary for allowing old timestamps from snapshot.debian.org
--aptopt='Acquire::Check-Valid-Until "false"'
--aptopt='Apt::Key::gpgvcommand "/usr/libexec/mmdebstrap/gpgvnoexpkeysig"'
Example: Settings controlling download of package description translations
--aptopt='Acquire::Languages { "environment"; "en"; }'
--aptopt='Acquire::Languages "none"'
Example: Enable installing Recommends (by default mmdebstrap doesn't)
--aptopt='Apt::Install-Recommends "true"'
Example: Configure apt-cacher or apt-cacher-ng as an apt proxy
--aptopt='Acquire::http { Proxy "http://127.0.0.1:3142"; }'
Example: For situations in which the apt sandbox user cannot access the chroot
--aptopt='APT::Sandbox::User "root"'
Example: Minimizing the number of packages installed from experimental
--aptopt='APT::Solver "aspcud"'
--aptopt='APT::Solver::aspcud::Preferences
"-count(solution,APT-Release:=/a=experimental/),-removed,-changed,-new"'
--keyring=file|directory
Change the default keyring to use by apt. By default, /etc/apt/trusted.gpg and
/etc/apt/trusted.gpg.d are used. Depending on whether a file or directory is
passed to this option, the former and latter default can be changed, respectively.
Since apt only supports a single keyring file and directory, respectively, you can
not use this option to pass multiple files and/or directories. Using the
"--keyring" argument in the following way is equal to keeping the default:
--keyring=/etc/apt/trusted.gpg --keyring=/etc/apt/trusted.gpg.d
If you need to pass multiple keyrings, use the "signed-by" option when specifying
the mirror like this:
mmdebstrap mysuite out.tar "deb [signed-by=/path/to/key.gpg] http://..."
The "signed-by" option will automatically be added to the final "sources.list" if
the keyring required for the selected SUITE is not yet trusted by apt.
Automatically adding the "signed-by" option in these cases requires "gpg" to be
installed. If "gpg" and "ubuntu-archive-keyring" are installed, then you can
create a Ubuntu Bionic chroot on Debian like this:
mmdebstrap bionic ubuntu-bionic.tar
The resulting chroot will have a "source.list" with a "signed-by" option pointing
to /usr/share/keyrings/ubuntu-archive-keyring.gpg.
--dpkgopt=option|file
Pass arbitrary options to dpkg. Will be permanently added to
/etc/dpkg/dpkg.cfg.d/99mmdebstrap inside the chroot. Use hooks for temporary
configuration options. Can be specified multiple times. Each option will be
appended to 99mmdebstrap. If the command line argument is an existing file, the
content of the file will be appended to 99mmdebstrap verbatim.
Example: Exclude paths to reduce chroot size
--dpkgopt='path-exclude=/usr/share/man/*'
--dpkgopt='path-include=/usr/share/man/man[1-9]/*'
--dpkgopt='path-exclude=/usr/share/locale/*'
--dpkgopt='path-include=/usr/share/locale/locale.alias'
--dpkgopt='path-exclude=/usr/share/doc/*'
--dpkgopt='path-include=/usr/share/doc/*/copyright'
--dpkgopt='path-include=/usr/share/doc/*/changelog.Debian.*'
--dpkgopt='path-exclude=/usr/share/{doc,info,man,omf,help,gnome/help}/*'
--include=pkg1[,pkg2,...]
Comma or whitespace separated list of packages which will be installed in addition
to the packages installed by the specified variant. The direct and indirect hard
dependencies will also be installed. The behaviour of this option depends on the
selected variant. The extract and custom variants install no packages by default,
so for these variants, the packages specified by this option will be the only ones
that get either extracted or installed by dpkg, respectively. For all other
variants, apt is used to install the additional packages. Package names are
directly passed to apt and thus, you can use apt features like "pkg/suite",
"pkg=version", "pkg-", use a glob or regex for "pkg" or use apt patterns. See
apt(8) for the supported syntax. The option can be specified multiple times and
the packages are concatenated in the order in which they are given on the command
line. If later list items are repeated, then they get dropped so that the
resulting package list is free of duplicates. So the following are equivalent:
--include="pkg1/stable pkg2=1.0 pkg3-"
--include=pkg1/stable,pkg2=1.0,pkg3-
--incl=pkg1/stable --incl="pkg2=1.0 pkg3-" --incl=pkg2=1.0,pkg3-
Example: setting up merged-/usr via the usrmerge package
--include=usrmerge
--components=comp1[,comp2,...]
Comma or whitespace separated list of components like main, contrib and non-free
which will be used for all URI-only MIRROR arguments. The option can be specified
multiple times and the components are concatenated in the order in which they are
given on the command line. If later list items are repeated, then they get dropped
so that the resulting component list is free of duplicates. So the following are
equivalent:
--components="main contrib non-free"
--components=main,contrib,non-free
--comp=main --comp="contrib non-free" --comp="main,non-free"
--architectures=native[,foreign1,...]
Comma or whitespace separated list of architectures. The first architecture is the
native architecture inside the chroot. The remaining architectures will be added
to the foreign dpkg architectures. Without this option, the native architecture of
the chroot defaults to the native architecture of the system running mmdebstrap.
The option can be specified multiple times and values are concatenated. If later
list items are repeated, then they get dropped so that the resulting list is free
of duplicates. So the following are equivalent:
--architectures="amd64 armhf mipsel"
--architectures=amd64,armhf,mipsel
--arch=amd64 --arch="armhf mipsel" --arch=armhf,mipsel
--simulate, --dry-run
Run apt-get with --simulate. Only the package cache is initialized but no binary
packages are downloaded or installed. Use this option to quickly check whether a
package selection within a certain suite and variant can in principle be installed
as far as their dependencies go. If the output is a tarball, then no output is
produced. If the output is a directory, then the directory will be left populated
with the skeleton files and directories necessary for apt to run in it. No hooks
are executed in with --simulate or --dry-run.
--setup-hook=command
Execute arbitrary commands right after initial setup (directory creation,
configuration of apt and dpkg, ...) but before any packages are downloaded or
installed. At that point, the chroot directory does not contain any executables
and thus cannot be chroot-ed into. See section HOOKS for more information.
Example 1: Setup merged-/usr via symlinks, omitting the architecture specific
symlinks
--setup-hook='for d in bin sbin lib; do ln -s usr/$d "$1/$d";
mkdir -p "$1/usr/$d"; done'
Example 2: Setup merged-/usr using debootstrap-method which takes care of the
architecture specific symlinks
--setup-hook=/usr/share/mmdebstrap/hooks/merged-usr/setup00.sh
Example 3: Setup chroot for installing a sub-essential busybox-based chroot with
--variant=custom
--include=dpkg,busybox,libc-bin,base-files,base-passwd,debianutils
--setup-hook='mkdir -p "$1/bin"'
--setup-hook='for p in awk cat chmod chown cp diff echo env grep less ln
mkdir mount rm rmdir sed sh sleep sort touch uname mktemp; do
ln -s busybox "$1/bin/$p"; done'
--setup-hook='echo root:x:0:0:root:/root:/bin/sh > "$1/etc/passwd"'
--setup-hook='printf "root:x:0:\nmail:x:8:\nutmp:x:43:\n" > "$1/etc/group"'
For a more elegant way to setup merged-/usr via symlinks and for setting up a sub-
essential busybox-based chroot, see the --hook-dir option below.
--extract-hook=command
Execute arbitrary commands after the Essential:yes packages have been extracted
but before installing them. See section HOOKS for more information.
Example: Install busybox symlinks
--extract-hook='chroot "$1" busybox --install -s'
--essential-hook=command
Execute arbitrary commands after the Essential:yes packages have been installed
but before installing the remaining packages. The hook is not executed for the
extract and custom variants. See section HOOKS for more information.
Example: Enable unattended upgrades
--essential-hook='echo unattended-upgrades
unattended-upgrades/enable_auto_updates boolean true
| chroot "$1" debconf-set-selections'
Example: Select Europe/Berlin as the timezone
--essential-hook='echo tzdata tzdata/Areas select Europe
| chroot "$1" debconf-set-selections'
--essential-hook='echo tzdata tzdata/Zones/Europe select Berlin
| chroot "$1" debconf-set-selections'
--customize-hook=command
Execute arbitrary commands after the chroot is set up and all packages got
installed but before final cleanup actions are carried out. See section HOOKS for
more information.
Example: Preparing a chroot for use with autopkgtest
--customize-hook='chroot "$1" passwd --delete root'
--customize-hook='chroot "$1" useradd --home-dir /home/user
--create-home user'
--customize-hook='chroot "$1" passwd --delete user'
--customize-hook='echo host > "$1/etc/hostname"'
--customize-hook='echo "127.0.0.1 localhost host" > "$1/etc/hosts"'
--customize-hook=/usr/share/autopkgtest/setup-commands/setup-testbed
--hook-directory=directory
Execute scripts in directory with filenames starting with "setup", "extract",
"essential" or "customize", at the respective stages during an mmdebstrap run. The
files must be marked executable. Their extension is ignored. Subdirectories are
not traversed. This option is a short-hand for specifying the remaining four hook
options individually for each file in the directory. If there are more than one
script for a stage, then they are added alphabetically. This is useful in cases,
where a user wants to run the same hooks frequently. For example, given a
directory "./hooks" with two scripts "setup01-foo.sh" and "setup02-bar.sh", this
call:
mmdebstrap --customize=./scriptA --hook-dir=./hooks --setup=./scriptB
is equivalent to this call:
mmdebstrap --customize=./scriptA --setup=./hooks/setup01-foo.sh \
--setup=./hooks/setup02-bar.sh --setup=./scriptB
The option can be specified multiple times and scripts are added to the respective
hooks in the order the options are given on the command line. Thus, if the scripts
in two directories depend upon each other, the scripts must be placed into a
common directory and be named such that they get added in the correct order.
Example 1: Run mmdebstrap with eatmydata
--hook-dir=/usr/share/mmdebstrap/hooks/eatmydata
Example 2: Setup chroot for installing a sub-essential busybox-based chroot
--hook-dir=/usr/share/mmdebstrap/hooks/busybox
Example 3: Setup merged-/usr using debootstrap-method which takes care of the
architecture specific symlinks
--hook-dir=/usr/share/mmdebstrap/hooks/merged-usr
--skip=stage[,stage,...]
mmdebstrap tries hard to implement sensible defaults and will try to stop you
before shooting yourself in the foot. This option is for when you are sure you
know what you are doing and allows one to skip certain actions and safety checks.
See section OPERATION for a list of possible arguments and their context.
-q,--quiet, -s,--silent
Do not write anything to standard error. If used together with --verbose or
--debug, only the last option will take effect.
-v,--verbose
Instead of progress bars, write the dpkg and apt output directly to standard
error. If used together with --quiet or --debug, only the last option will take
effect.
-d,--debug
In addition to the output produced by --verbose, write detailed debugging
information to standard error. Errors will print a backtrace. If used together
with --quiet or --verbose, only the last option will take effect.
--logfile=filename
Instead of writing status information to standard error, write it into the file
given by filename.
MODES
Creating a Debian chroot requires not only permissions for running chroot but also the
ability to create files owned by the superuser. The selected mode decides which way this
is achieved.
auto This mode automatically selects a fitting mode. If the effective user id is the
one of the superuser, then the sudo mode is chosen. Otherwise, the unshare mode is
picked if the system has the sysctl "kernel.unprivileged_userns_clone" set to 1.
Should that not be the case and if the fakechroot binary exists, the fakechroot
mode is chosen. Lastly, the proot mode is used if the proot binary exists.
sudo, root
This mode directly executes chroot and is the same mode of operation as is used by
debootstrap. It is the only mode that can directly create a directory chroot with
the right permissions. If the chroot directory is not accessible by the _apt user,
then apt sandboxing will be automatically disabled. This mode needs to be able to
mount and thus requires "SYS_CAP_ADMIN".
unshare This mode uses Linux user namespaces to allow unprivileged use of chroot and
creation of files that appear to be owned by the superuser inside the unshared
namespace. A tarball created in this mode should be bit-by-bit identical to a
tarball created with the root mode.
A directory chroot created with this mode will end up with wrong ownership
information. For correct ownership information, the directory must be accessed
from a user namespace with the right subuid/subgid offset, like so:
$ lxc-usernsexec -- lxc-unshare -s 'MOUNT|PID|UTSNAME|IPC' -- \
> /usr/sbin/chroot ./debian-rootfs /bin/bash
Or without LXC:
$ mmdebstrap --unshare-helper /usr/sbin/chroot ./debian-rootfs /bin/bash
Or, if you don't mind using superuser privileges and have systemd-nspawn available
and you know your subuid/subgid offset (100000 in this example):
$ sudo systemd-nspawn --private-users=100000 \
> --directory=./debian-rootfs /bin/bash
If this mode is used as the root user, the user namespace is not unshared (but the
mount namespace and other still are) and created directories will have correct
ownership information. This is also useful in cases where the root user wants the
benefits of an unshared mount namespace to prevent accidentally messing up the
system.
fakeroot, fakechroot
This mode will exec mmdebstrap again under "fakechroot fakeroot". A directory
chroot created with this mode will end up with wrong permissions. If you need a
directory then run mmdebstrap under "fakechroot fakeroot -s fakeroot.env" and use
"fakeroot.env" later when entering the chroot with "fakechroot fakeroot -i
fakeroot.env chroot ...". This mode will not work if maintainer scripts are unable
to handle "LD_PRELOAD" correctly like the package initramfs-tools until version
0.132. This mode will also not work with a different libc inside the chroot than
on the outside. See the section LIMITATIONS in fakechroot(1).
proot This mode will carry out all calls to chroot with proot instead. Since ownership
information is only retained while proot is still running, this will lead to wrong
ownership information in the final directory (everything will be owned by the user
that executed mmdebstrap) and tarball (everything will be owned by the root user).
Extended attributes are not retained. This mode is useful if you plan to use the
chroot with proot.
chrootless
Uses the dpkg option "--force-script-chrootless" to install packages into TARGET
without dpkg and apt inside TARGET but using apt and dpkg from the machine running
mmdebstrap. Maintainer scripts are run without chrooting into TARGET and rely on
their dependencies being installed on the machine running mmdebstrap. Only very
few packages support this mode. Namely, as of 2021, not all essential packages
support it, mainly due to missing support in debconf. See
https://wiki.debian.org/Teams/Dpkg/Spec/InstallBootstrap or the dpkg-root-support
usertag of debian-dpkg@lists.debian.org in the Debian bug tracking system.
WARNING: if this option is used carelessly with packages that do not support
"DPKG_ROOT", this mode can result in undesired changes to the system running
mmdebstrap because maintainer-scripts will be run without chroot(1).
VARIANTS
All package sets also include the direct and indirect hard dependencies (but not
recommends) of the selected package sets. The variants minbase, buildd and -, resemble the
package sets that debootstrap would install with the same --variant argument. The release
with a name matching the SUITE argument as well as the native architecture will be used to
determine the "Essential:yes" and priority values. To select packages with matching
priority from any suite, specify the empty string for SUITE. The default variant is
debootstrap.
extract Installs nothing by default (not even "Essential:yes" packages). Packages given by
the "--include" option are extracted but will not be installed.
custom Installs nothing by default (not even "Essential:yes" packages). Packages given by
the "--include" option will be installed. If another mode than chrootless was
selected and dpkg was not part of the included package set, then this variant will
fail because it cannot configure the packages.
essential
"Essential:yes" packages.
apt The essential set plus apt.
required, minbase
The essential set plus all packages with Priority:required and apt. It is roughly
equivalent to running mmdebstrap with
--variant=essential --include="?priority(required)"
buildd The minbase set plus build-essential. It is roughly equivalent to running
mmdebstrap with
--variant=essential --include="?priority(required),build-essential"
important, debootstrap, -
The required set plus all packages with Priority:important. This is the default of
debootstrap. It is roughly equivalent to running mmdebstrap with
--variant=essential --include="~prequired|~pimportant"
standard
The important set plus all packages with Priority:standard. It is roughly
equivalent to running mmdebstrap with
--variant=essential --include="~prequired|~pimportant|~pstandard"
FORMATS
The output format of mmdebstrap is specified using the --format option. Without that
option the default format is auto. The following formats exist:
auto When selecting this format (the default), the actual format will be inferred from
the TARGET positional argument. If TARGET was not specified, then the tar format
will be chosen. If TARGET happens to be /dev/null or if standard output is
/dev/null, then the null format will be chosen. If TARGET is an existing
directory, and does not equal to "-", then the directory format will be chosen. If
TARGET ends with ".tar" or with one of the filename extensions listed in the
section COMPRESSION, or if TARGET equals "-", or if TARGET is a named pipe (fifo)
or if TARGET is a character special file, then the tar format will be chosen. If
TARGET ends with ".squashfs" or ".sqfs", then the squashfs format will be chosen.
If <TARGET> ends with ".ext2" then the ext2 format will be chosen. If none of
these conditions apply, the directory format will be chosen.
directory, dir
A chroot directory will be created in TARGET. If the directory already exists, it
must either be empty or only contain an empty "lost+found" directory. The special
TARGET "-" does not work with this format because a directory cannot be written to
standard output. If you need your directory be named "-", then just explicitly
pass the relative path to it like ./-. If a directory is chosen as output in any
other mode than sudo, then its contents will have wrong ownership information and
special device files will be missing. Refer to the section MODES for more
information.
tar A temporary chroot directory will be created in $TMPDIR or /tmp if $TMPDIR is not
set. A tarball of that directory will be stored in TARGET or sent to standard
output if TARGET was omitted or if TARGET equals "-". If TARGET ends with one of
the filename extensions listed in the section COMPRESSION, then a compressed
tarball will be created. The tarball will be in POSIX 1003.1-2001 (pax) format and
will contain extended attributes. To preserve the extended attributes, you have
to pass --xattrs --xattrs-include='*' to tar when extracting the tarball.
squashfs, sqfs
A temporary chroot directory will be created in $TMPDIR or /tmp if $TMPDIR is not
set. A tarball of that directory will be piped to the "tar2sqfs" utility, which
will create an xz compressed squashfs image with a blocksize of 1048576 bytes in
TARGET. The special TARGET "-" does not work with this format because "tar2sqfs"
can only write to a regular file. If you need your squashfs image be named "-",
then just explicitly pass the relative path to it like ./-. The "tar2sqfs" tool
only supports a limited set of extended attribute prefixes. Therefore, extended
attributes are disabled in the resulting image. If you need them, create a tarball
first and remove the extended attributes from its pax headers. Refer to the
EXAMPLES section for how to achieve this.
ext2 A temporary chroot directory will be created in $TMPDIR or /tmp if $TMPDIR is not
set. A tarball of that directory will be piped to the "genext2fs" utility, which
will create an ext2 image that will be approximately 90% full in TARGET. The
special TARGET "-" does not work with this format because "genext2fs" can only
write to a regular file. If you need your ext2 image be named "-", then just
explicitly pass the relative path to it like ./-. To convert the result to an ext3
image, use "tune2fs -O has_journal TARGET" and to convert it to ext4, use "tune2fs
-O extents,uninit_bg,dir_index,has_journal TARGET". Since "genext2fs" does not
support extended attributes, the resulting image will not contain them.
null A temporary chroot directory will be created in $TMPDIR or /tmp if $TMPDIR is not
set. After the bootstrap is complete, the temporary chroot will be deleted without
being part of the output. This is most useful when the desired artifact is
generated inside the chroot and it is transferred using special hooks such as
sync-out. It is also useful in situations where only the exit code or stdout or
stderr of a process run in a hook is of interest.
HOOKS
This section describes properties of the hook options --setup-hook, --extract-hook,
--essential-hook and --customize-hook which are common to all four of them. Any
information specific to each hook is documented under the specific hook options in the
section OPTIONS.
The options can be specified multiple times and the commands are executed in the order in
which they are given on the command line. There are four different types of hook option
arguments. If the argument passed to the hook option starts with "copy-in", "copy-out",
"tar-in", "tar-out", "upload" or "download" followed by a space, then the hook is
interpreted as a special hook. Otherwise, if command is an existing executable file from
$PATH or if command does not contain any shell metacharacters, then command is directly
exec-ed with the path to the chroot directory passed as the first argument. Otherwise,
command is executed under sh and the chroot directory can be accessed via $1. All
environment variables set by mmdebstrap (like "APT_CONFIG", "DEBIAN_FRONTEND", "LC_ALL"
and "PATH") are preserved. All environment variables set by the user are preserved, except
for "TMPDIR" which is cleared. See section TMPDIR.
The paths inside the chroot are relative to the root directory of the chroot. The path on
the outside is relative to current directory of the original mmdebstrap invocation. The
path inside the chroot must already exist. Paths outside the chroot are created as
necessary.
In fakechroot and proot mode, "tar", or "sh" and "cat" have to be run inside the chroot or
otherwise, symlinks will be wrongly resolved and/or permissions will be off. This means
that the special hooks might fail in fakechroot and proot mode for the setup hook or for
the extract and custom variants if no "tar" or "sh" and "cat" is available inside the
chroot.
copy-out pathinside [pathinside ...] pathoutside
Recursively copies one or more files and directories recursively from pathinside
inside the chroot to pathoutside outside of the chroot.
copy-in pathoutside [pathoutside ...] pathinside
Recursively copies one or more files and directories into the chroot into, placing
them into pathinside inside of the chroot.
sync-out pathinside pathoutside
Recursively copy everything inside pathinside inside the chroot into pathoutside.
In contrast to copy-out, this command synchronizes the content of pathinside with
the content of pathoutside without deleting anything from pathoutside but
overwriting content as necessary. Use this command over copy-out if you don't want
to create a new directory outside the chroot but only update the content of an
existing directory.
sync-in pathoutside pathinside
Recursively copy everything inside pathoutside into pathinside inside the chroot.
In contrast to copy-in, this command synchronizes the content of pathoutside with
the content of pathinside without deleting anything from pathinside but
overwriting content as necessary. Use this command over copy-in if you don't want
to create a new directory inside the chroot but only update the content of an
existing directory.
tar-in outside.tar pathinside
Unpacks a tarball outside.tar from outside the chroot into a certain location
pathinside inside the chroot.
tar-out pathinside outside.tar
Packs the path pathinside from inside the chroot into a tarball, placing it into a
certain location outside.tar outside the chroot.
download fileinside fileoutside
Copy the file given by fileinside from inside the chroot to outside the chroot as
fileoutside. In contrast to copy-out, this command only handles files and not
directories. To copy a directory recursively out of the chroot, use copy-out or
tar-out. Its advantage is, that by being able to specify the full path on the
outside, including the filename, the file on the outside can have a different name
from the file on the inside.
upload fileoutside fileinside
Copy the file given by fileoutside from outside the chroot to inside the chroot as
fileinside. In contrast to copy-in, this command only handles files and not
directories. To copy a directory recursively into the chroot, use copy-in or tar-
in. Its advantage is, that by being able to specify the full path on the inside,
including the filename, the file on the inside can have a different name from the
file on the outside. In contrast to copy-in and tar-in, permission and ownership
information will not be retained.
OPERATION
This section gives an overview of the different steps to create a chroot.
check Upon startup, several checks are carried out, like:
• whether required utilities (apt, dpkg, tar) are installed
• which mode to use and whether prerequisites are met
• whether the requested architecture can be executed (requires arch-test) using
qemu binfmt_misc support. This requires arch-test and can be disabled using
--skip=check/qemu
• how the apt sources can be assembled from SUITE, MIRROR and --components
and/or from standard input as deb822 or one-line format and whether the
required GPG keys exist.
• which output format to pick depending on the --format argument or name of
TARGET or its type.
• whether the output directory is empty. This check can be disabled using
--skip=check/empty
setup The following tasks are carried out unless --skip=setup is used:
• create required directories
• write out the temporary apt config file
• populates /etc/apt/apt.conf.d/99mmdebstrap and
/etc/dpkg/dpkg.cfg.d/99mmdebstrap with config options from --aptopt and
--dpkgopt, respectively
• write out /etc/apt/sources.list
• copy over /etc/resolv.conf and /etc/hostname
• populate /dev if mknod is possible
setup-hook
Run --setup-hook options and all setup* scripts in --hook-dir.
update Runs "apt-get update" using the temporary apt configuration file created in the
setup step. This can be disabled using --skip=update.
download
Checks whether /var/cache/apt/archives/ is empty. This can be disabled with
--skip=download/empty. In the extract and custom variants, "apt-get
--download-only install" is used to download all the packages requested via the
--include option. The apt variant uses the fact that libapt treats the "apt"
packages as implicitly essential to download only all "Essential:yes" packages
plus apt using "apt-get --download-only dist-upgrade". In the remaining variants,
all Packages files downloaded by the update step are inspected to find the
"Essential:yes" package set as well as all packages of the required priority.
extract Extract the downloaded packages into the rootfs.
extract-hook
Run --extract-hook options and all extract* scripts in --hook-dir.
prepare In fakechroot mode, environment variables "LD_LIBRARY_PATH" will be set up
correctly. If the chroot requires the qemu-user-static binary it will be copied
in. For foreign fakechroot environments, "LD_LIBRARY_PATH" and "QEMU_LD_PREFIX"
are set up accordingly. This step is not carried out in >extract mode and neither
for the chrootless variant.
essential
Uses "dpkg --install" to properly install all packages that have been extracted
before. Removes all packages downloaded in the download step, except those which
were present in /var/cache/apt/archives/ before (if any). This can be disabled
using --skip=essential/unlink. This step is not carried out in extract mode.
essential-hook
Run --essential-hook options and all essential* scripts in --hook-dir. This step
is not carried out in extract mode.
install Install the apt package into the chroot, if necessary and then run apt from inside
the chroot to install all remaining packages. This step is not carried out in
extract mode.
customize-hook
Run --customize-hook options and all customize* scripts in --hook-dir. This step
is not carried out in extract mode.
cleanup Performs cleanup tasks, unless --skip=cleanup is used:
• Removes the package lists (unless --skip=cleanup/apt/lists) and apt cache
(unless --skip=cleanup/apt/cache). Both removals can be disabled by using
--skip=cleanup/apt.
• Remove all files that were put into the chroot for setup purposes, like
/etc/apt/apt.conf.d/00mmdebstrap, the temporary apt config and the qemu-user-
static binary. This can be disabled using --skip=cleanup/mmdebstrap.
• Remove all files that make the result unreproducible, like apt and dpkg logs
and caches or /etc/machine-id and /var/lib/dbus/machine-id. This can be
disabled using --skip=cleanup/reproducible
• Remove everything in /tmp inside the chroot. This can be disabled using
--skip=cleanup/tmp.
For formats other than directory, pack up the temporary chroot directory into a
tarball, ext2 image or squashfs image and delete the temporary chroot directory.
EXAMPLES
Use like debootstrap:
$ sudo mmdebstrap unstable ./unstable-chroot
Without superuser privileges:
$ mmdebstrap unstable unstable-chroot.tar
With no command line arguments at all. The chroot content is entirely defined by a
sources.list file on standard input.
$ mmdebstrap < /etc/apt/sources.list > unstable-chroot.tar
Since the tarball is output on stdout, members of it can be excluded using tar on-the-fly.
For example the /dev directory can be removed from the final tarbal in cases where it is
to be extracted by a non-root user who cannot create device nodes:
$ mmdebstrap unstable | tar --delete ./dev > unstable-chroot.tar
Instead of a tarball, a squashfs image can be created:
$ mmdebstrap unstable unstable-chroot.squashfs
By default, mmdebstrap runs tar2sqfs with "--no-skip --exportable --compressor xz
--block-size 1048576". To choose a different set of options, and to filter out all
extended attributes not supported by tar2sqfs, pipe the output of mmdebstrap into tar2sqfs
manually like so:
$ mmdebstrap unstable \
| mmtarfilter --pax-exclude='*' \
--pax-include='SCHILY.xattr.user.*' \
--pax-include='SCHILY.xattr.trusted.*' \
--pax-include='SCHILY.xattr.security.*' \
| tar2sqfs --quiet --no-skip --force --exportable --compressor xz \
--block-size 1048576 unstable-chroot.squashfs
By default, debootstrapping a stable distribution will add mirrors for security and
updates to the sources.list.
$ mmdebstrap stable stable-chroot.tar
If you don't want this behaviour, you can override it by manually specifying a mirror in
various different ways:
$ mmdebstrap stable stable-chroot.tar http://deb.debian.org/debian
$ mmdebstrap stable stable-chroot.tar "deb http://deb.debian.org/debian stable main"
$ mmdebstrap stable stable-chroot.tar /path/to/sources.list
$ mmdebstrap stable stable-chroot.tar - < /path/to/sources.list
Drop locales (but not the symlink to the locale name alias database), translated manual
packages (but not the untranslated ones), and documentation (but not copyright and Debian
changelog).
$ mmdebstrap --variant=essential \
--dpkgopt='path-exclude=/usr/share/man/*' \
--dpkgopt='path-include=/usr/share/man/man[1-9]/*' \
--dpkgopt='path-exclude=/usr/share/locale/*' \
--dpkgopt='path-include=/usr/share/locale/locale.alias' \
--dpkgopt='path-exclude=/usr/share/doc/*' \
--dpkgopt='path-include=/usr/share/doc/*/copyright' \
--dpkgopt='path-include=/usr/share/doc/*/changelog.Debian.*' \
unstable debian-unstable.tar
Create a bootable USB Stick that boots into a full Debian desktop:
$ mmdebstrap --aptopt='Apt::Install-Recommends "true"' --customize-hook \
'chroot "$1" adduser --gecos user --disabled-password user' \
--customize-hook='echo 'user:live' | chroot "$1" chpasswd' \
--customize-hook='echo host > "$1/etc/hostname"' \
--customize-hook='echo "127.0.0.1 localhost host" > "$1/etc/hosts"' \
--include=linux-image-amd64,task-desktop unstable debian-unstable.tar
$ cat << END > extlinux.conf
> default linux
> timeout 0
>
> label linux
> kernel /vmlinuz
> append initrd=/initrd.img root=LABEL=rootfs
END
# You can use $(sudo blockdev --getsize64 /dev/sdXXX) to get the right
# image size for the target medium in bytes
$ guestfish -N debian-unstable.img=disk:8G -- part-disk /dev/sda mbr : \
part-set-bootable /dev/sda 1 true : mkfs ext2 /dev/sda1 : \
set-label /dev/sda1 rootfs : mount /dev/sda1 / : \
tar-in debian-unstable.tar / xattrs:true : \
upload /usr/lib/SYSLINUX/mbr.bin /mbr.bin : \
copy-file-to-device /mbr.bin /dev/sda size:440 : rm /mbr.bin : \
extlinux / : copy-in extlinux.conf / : sync : umount / : shutdown
$ qemu-system-x86_64 -m 1G -enable-kvm debian-unstable.img
$ sudo dd if=debian-unstable.img of=/dev/sdXXX status=progress
Build libdvdcss2.deb without installing installing anything or changing apt sources on the
current system:
$ mmdebstrap --variant=apt --components=main,contrib --include=libdvd-pkg \
--customize-hook='chroot $1 /usr/lib/libdvd-pkg/b-i_libdvdcss.sh' \
| tar --extract --verbose --strip-components=4 \
--wildcards './usr/src/libdvd-pkg/libdvdcss2_*_*.deb'
$ ls libdvdcss2_*_*.deb
Use as replacement for autopkgtest-build-qemu and vmdb2:
$ mmdebstrap --variant=important --include=linux-image-amd64 \
--customize-hook='chroot "$1" passwd --delete root' \
--customize-hook='chroot "$1" useradd --home-dir /home/user --create-home user' \
--customize-hook='chroot "$1" passwd --delete user' \
--customize-hook='echo host > "$1/etc/hostname"' \
--customize-hook='echo "127.0.0.1 localhost host" > "$1/etc/hosts"' \
--customize-hook=/usr/share/autopkgtest/setup-commands/setup-testbed \
unstable debian-unstable.tar
$ cat << END > extlinux.conf
> default linux
> timeout 0
>
> label linux
> kernel /vmlinuz
> append initrd=/initrd.img root=/dev/vda1 console=ttyS0
END
$ guestfish -N debian-unstable.img=disk:8G -- \
part-disk /dev/sda mbr : \
part-set-bootable /dev/sda 1 true : \
mkfs ext2 /dev/sda1 : mount /dev/sda1 / : \
tar-in debian-unstable.tar / xattrs:true : \
extlinux / : copy-in extlinux.conf / : \
sync : umount / : shutdown
$ qemu-img convert -O qcow2 debian-unstable.img debian-unstable.qcow2
As a debootstrap wrapper to run it without superuser privileges but using Linux user
namespaces instead. This fixes Debian bug #829134.
$ mmdebstrap --variant=custom --mode=unshare \
--setup-hook='env container=lxc debootstrap unstable "$1"' \
- debian-debootstrap.tar
Build a non-Debian chroot like Ubuntu bionic:
$ mmdebstrap --aptopt='Dir::Etc::Trusted
"/usr/share/keyrings/ubuntu-keyring-2012-archive.gpg"' bionic bionic.tar
If, for some reason, you cannot use a caching proxy like apt-cacher or apt-cacher-ng, you
can use the sync-in and sync-out special hooks to synchronize a directory outside the
chroot with /var/cache/apt/archives inside the chroot.
$ mmdebstrap --variant=apt --skip=download/empty --skip=essential/unlink \
--setup-hook='mkdir -p ./cache "$1"/var/cache/apt/archives/' \
--setup-hook='sync-in ./cache /var/cache/apt/archives/' \
--customize-hook='sync-out /var/cache/apt/archives ./cache' \
unstable /dev/null
Create a system that can be used with docker:
$ mmdebstrap unstable | sudo docker import - debian
[...]
$ sudo docker run -it --rm debian whoami
root
$ sudo docker rmi debian
Create a system that can be used with podman:
$ mmdebstrap unstable | podman import - debian
[...]
$ podman run --network=none -it --rm debian whoami
root
$ podman rmi debian
As a docker/podman replacement:
$ mmdebstrap unstable | mmtarfilter --path-exclude='/dev/*' > chroot.tar
[...]
$ mmdebstrap --variant=custom --skip=update \
--setup-hook='tar-in chroot.tar /' \
--customize-hook='chroot "$1" whoami' unstable /dev/null
[...]
root
$ rm chroot.tar
ENVIRONMENT VARIABLES
"SOURCE_DATE_EPOCH"
By setting "SOURCE_DATE_EPOCH" the result will be reproducible over multiple runs
with the same options and mirror content.
"TMPDIR"
When creating a tarball, a temporary directory is populated with the rootfs before
the tarball is packed. The location of that temporary directory will be in /tmp or
the location pointed to by "TMPDIR" if that environment variable is set.
Since "TMPDIR" is only valid outside the chroot, the variable is being unset when
running hook scripts. If you need a valid temporary directory in a hook, consider
using /tmp inside your target directory.
DEBOOTSTRAP
This section lists some differences to debootstrap.
• More than one mirror possible
• Default mirrors for stable releases include updates and security mirror
• Multiple ways to operate as non-root: fakechroot, proot, unshare
• 3-6 times faster
• Can create a chroot with only "Essential:yes" packages and their deps
• Reproducible output by default if $SOURCE_DATE_EPOCH is set
• Can create output on filesystems with nodev set
• apt cache and lists are cleaned at the end
• foreign architecture chroots using qemu-user
Limitations in comparison to debootstrap:
• Only runs on systems with apt installed (Debian and derivatives)
• No SCRIPT argument
• Some debootstrap options don't exist, namely:
--second-stage, --exclude, --resolve-deps, --force-check-gpg, --merged-usr and
--no-merged-usr
COMPRESSION
mmdebstrap will choose a suitable compressor for the output tarball depending on the
filename extension. The following mapping from filename extension to compressor applies:
extension compressor
--------------------
.tar none
.gz gzip
.tgz gzip
.taz gzip
.Z compress
.taZ compress
.bz2 bzip2
.tbz bzip2
.tbz2 bzip2
.tz2 bzip2
.lz lzip
.lzma lzma
.tlz lzma
.lzo lzop
.lz4 lz4
.xz xz
.txz xz
.zst zstd
To change compression specific options, either use the respecitve environment variables
like XZ_OPT or send mmdebstrap output to your compressor of choice with a pipe.
BUGS
https://gitlab.mister-muffin.de/josch/mmdebstrap/issues
https://bugs.debian.org/src:mmdebstrap
As of version 1.20.9, dpkg does not provide facilities preventing it from reading the dpkg
configuration of the machine running mmdebstrap. Therefore, until this dpkg limitation is
fixed, a default dpkg configuration is recommended on machines running mmdebstrap. If you
are using mmdebstrap as the non-root user, then as a workaround you could run "chmod 600
/etc/dpkg/dpkg.cfg.d/*" so that the config files are only accessible by the root user. See
Debian bug #808203.
The "file://" URI type cannot be used to install the essential packages. This is because
mmdebstrap uses dpkg to install the packages that apt places into /var/cache/apt/archives
but with "file://" apt will not copy the files even with "--download-only". Use "copy://"
instead, which is equivalent to "file://" but copies the archives into
/var/cache/apt/archives.
With apt versions before 2.1.16, setting "[trusted=yes]" or
"Acquire::AllowInsecureRepositories "1"" to allow signed archives without a known public
key or unsigned archives will fail because of a gpg warning in the apt output. Since apt
does not communicate its status via any other means than human readable strings, and
because mmdebstrap wants to treat transient network errors as errors, mmdebstrap treats
any warning from "apt-get update" as an error.
SEE ALSO
debootstrap(8)