NAME

       nvme-micron-smart-add-log - Retrieves NAND statistics (2200 model drives) or Extended
       SMART information (OCP complaint models) of given micron device

SYNOPSIS

       nvme micron vs-smart-add-log <device>  -f <json|normal>

DESCRIPTION

       This command prints NAND information (Total bytes written, Bad block count and Erase
       failures etc) for the given micron device if its of 2200 model controller. For OCP
       complaint controllers this command print extended SMART health data along with NAND
       information (if available)

       The <device> parameter is mandatory and may be either the NVMe character device (ex:
       /dev/nvme0), or a namespace block device (ex: /dev/nvme0n1).

       The -f option controls the displayed output data format based on the option value. If the
       option value is json (which is enabled by default), output data is printed in JSON format.
       If option value is normal the output is displayed in non-JSON format.

       This will only work on Micron devices devices of model numbers 54XX and OCP complaint
       controllers. Support for new devices may be added subsequently.

OPTIONS

       -f <json|normal> controls the format of displayed output.

EXAMPLES

       •   Retrieve NAND/extended SMART data and display in json format

               # nvme micron vs-nand-stats /dev/nvme0

               * Retrieve NAND/extended SMART data and display in non-json format
               +

       # nvme micron vs-nand-stats /dev/nvme0 -f normal

           NVME

       Part of the nvme-user suite

                                                                              NVME-MICRON-SMART()