Ubuntu Manpage: pg_resetwal - reset the write-ahead log and other control information of a PostgreSQL

Provided by: postgresql-14_14.15-0ubuntu0.22.04.1_amd64

NAME

       pg_resetwal - reset the write-ahead log and other control information of a PostgreSQL
       database cluster

SYNOPSIS

       pg_resetwal [-f | --force] [-n | --dry-run] [option...] [-D | --pgdata]datadir

DESCRIPTION

pg_resetwal clears the write-ahead log (WAL) and optionally resets some other control
information stored in the pg_control file. This function is sometimes needed if these
files have become corrupted. It should be used only as a last resort, when the server will
not start due to such corruption.

After running this command, it should be possible to start the server, but bear in mind
that the database might contain inconsistent data due to partially-committed transactions.
You should immediately dump your data, run initdb, and restore. After restore, check for
inconsistencies and repair as needed.

This utility can only be run by the user who installed the server, because it requires
read/write access to the data directory. For safety reasons, you must specify the data
directory on the command line. pg_resetwal does not use the environment variable PGDATA.

If pg_resetwal complains that it cannot determine valid data for pg_control, you can force
it to proceed anyway by specifying the -f (force) option. In this case plausible values
will be substituted for the missing data. Most of the fields can be expected to match, but
manual assistance might be needed for the next OID, next transaction ID and epoch, next
multitransaction ID and offset, and WAL starting location fields. These fields can be set
using the options discussed below. If you are not able to determine correct values for all
these fields, -f can still be used, but the recovered database must be treated with even
more suspicion than usual: an immediate dump and restore is imperative. Do not execute
any data-modifying operations in the database before you dump, as any such action is
likely to make the corruption worse.

OPTIONS

-f
--force
Force pg_resetwal to proceed even if it cannot determine valid data for pg_control, as
explained above.

-n
--dry-run
The -n/--dry-run option instructs pg_resetwal to print the values reconstructed from
pg_control and values about to be changed, and then exit without modifying anything.
This is mainly a debugging tool, but can be useful as a sanity check before allowing
pg_resetwal to proceed for real.

-V
--version
Display version information, then exit.

-?
--help
Show help, then exit.

The following options are only needed when pg_resetwal is unable to determine appropriate
values by reading pg_control. Safe values can be determined as described below. For values
that take numeric arguments, hexadecimal values can be specified by using the prefix 0x.

-c xid,xid
--commit-timestamp-ids=xid,xid
Manually set the oldest and newest transaction IDs for which the commit time can be
retrieved.

A safe value for the oldest transaction ID for which the commit time can be retrieved
(first part) can be determined by looking for the numerically smallest file name in
the directory pg_commit_ts under the data directory. Conversely, a safe value for the
newest transaction ID for which the commit time can be retrieved (second part) can be
determined by looking for the numerically greatest file name in the same directory.
The file names are in hexadecimal.

-e xid_epoch
--epoch=xid_epoch
Manually set the next transaction ID's epoch.

The transaction ID epoch is not actually stored anywhere in the database except in the
field that is set by pg_resetwal, so any value will work so far as the database itself
is concerned. You might need to adjust this value to ensure that replication systems
such as Slony-I and Skytools work correctly — if so, an appropriate value should be
obtainable from the state of the downstream replicated database.

-l walfile
--next-wal-file=walfile
Manually set the WAL starting location by specifying the name of the next WAL segment
file.

The name of next WAL segment file should be larger than any WAL segment file name
currently existing in the directory pg_wal under the data directory. These names are
also in hexadecimal and have three parts. The first part is the “timeline ID” and
should usually be kept the same. For example, if 00000001000000320000004A is the
largest entry in pg_wal, use -l 00000001000000320000004B or higher.

Note that when using nondefault WAL segment sizes, the numbers in the WAL file names
are different from the LSNs that are reported by system functions and system views.
This option takes a WAL file name, not an LSN.

Note
pg_resetwal itself looks at the files in pg_wal and chooses a default -l setting
beyond the last existing file name. Therefore, manual adjustment of -l should only
be needed if you are aware of WAL segment files that are not currently present in
pg_wal, such as entries in an offline archive; or if the contents of pg_wal have
been lost entirely.

-m mxid,mxid
--multixact-ids=mxid,mxid
Manually set the next and oldest multitransaction ID.

A safe value for the next multitransaction ID (first part) can be determined by
looking for the numerically largest file name in the directory pg_multixact/offsets
under the data directory, adding one, and then multiplying by 65536 (0x10000).
Conversely, a safe value for the oldest multitransaction ID (second part of -m) can be
determined by looking for the numerically smallest file name in the same directory and
multiplying by 65536. The file names are in hexadecimal, so the easiest way to do this
is to specify the option value in hexadecimal and append four zeroes.

-o oid
--next-oid=oid
Manually set the next OID.

There is no comparably easy way to determine a next OID that's beyond the largest one
in the database, but fortunately it is not critical to get the next-OID setting right.

-O mxoff
--multixact-offset=mxoff
Manually set the next multitransaction offset.

A safe value can be determined by looking for the numerically largest file name in the
directory pg_multixact/members under the data directory, adding one, and then
multiplying by 52352 (0xCC80). The file names are in hexadecimal. There is no simple
recipe such as the ones for other options of appending zeroes.

--wal-segsize=wal_segment_size
Set the new WAL segment size, in megabytes. The value must be set to a power of 2
between 1 and 1024 (megabytes). See the same option of initdb(1) for more information.

Note
While pg_resetwal will set the WAL starting address beyond the latest existing WAL
segment file, some segment size changes can cause previous WAL file names to be
reused. It is recommended to use -l together with this option to manually set the
WAL starting address if WAL file name overlap will cause problems with your
archiving strategy.

-u xid
--oldest-transaction-id=xid
Manually set the oldest unfrozen transaction ID.

A safe value can be determined by looking for the numerically smallest file name in
the directory pg_xact under the data directory and then multiplying by 1048576
(0x100000). Note that the file names are in hexadecimal. It is usually easiest to
specify the option value in hexadecimal too. For example, if 0007 is the smallest
entry in pg_xact, -u 0x700000 will work (five trailing zeroes provide the proper
multiplier).

-x xid
--next-transaction-id=xid
Manually set the next transaction ID.

A safe value can be determined by looking for the numerically largest file name in the
directory pg_xact under the data directory, adding one, and then multiplying by
1048576 (0x100000). Note that the file names are in hexadecimal. It is usually easiest
to specify the option value in hexadecimal too. For example, if 0011 is the largest
entry in pg_xact, -x 0x1200000 will work (five trailing zeroes provide the proper
multiplier).

ENVIRONMENT

       PG_COLOR
           Specifies whether to use color in diagnostic messages. Possible values are always,
           auto and never.

NOTES